,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bar Stock Carrier

          Machinelist: Bar Stock Carrier


          Bar Stock Carrier

          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO ecoProfi 42.6 RK3 - 6000 III


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09212F · Bar Stock Carrier

          BREUNING IRCO - ecoProfi 42.6 RK3 - 6000 III - - 2020 - SPS

          Technical details
          diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱
          used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design
            diameter 5 - max. 51 mm
            Guide channels max. 6
            Spindle height ca. 1020 mm
            bar material dia. min. 5 mm
            bar material dia. max. 51 mm
            max. bar length 6200 mm
            Remaining piece design 600 mm
            accumulator pressure min 6 bar
            coolant capacity 1500 l/min
            control SPS
            total power requirement 2,3 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 7,2 x 1,55 x 1,6 m
            Description :
            used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III
            Condition: As NEW, approx. 500 operating hours
            incl:
            Guide channels Ø 20/24/44 Material slide Ø 19/22/42
            spindle insert tubes Ø 20/24/44
            Interface to the machine set up for Mazak QT 200 MS x 500

            Area of application: Ideal for small to medium batch sizes
            Features:
            Minimal changeover times, channel change at the touch of a button
            Optimum running properties 3 to 6 guide channels, high dead weight
            Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels
            High level of operating convenience thanks to an 18 cm (7") widescreen touch
            display. Reliable feeding of rotationally symmetrical profile material
            Electronic synchronisation device, optimum material guidance between magazine
            and machine with hydrodynamic telescopic system.
            Simple changeover from long to short turning operation at the touch of a button
            Special features:
            Simple change of the spindle insert tubes through axial displacement of the
            magazine. Process-integrated remnant removal to the rear (remnant length 600 mm)
            Machine-friendly, vibration-absorbing design


        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier LNS Eco Load


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2777 · Bar Stock Carrier

          LNS - Eco Load - - 2004 -

          Technical details
          Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱
            Bar diameter 6 - 65 mm
            Bar Length 300 - 1250 mm
            Length 1600 mm
            Depth 1048 mm
            Height 1010 / 1410 mm
            Weight 375 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO Profimat 65.6 196.6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8361 · Bar Stock Carrier

          BREUNING IRCO - Profimat 65.6 196.6 - - 2001 - SPS

          Technical details
          diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱
          Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC
            diameter 35 - max. 65 mm
            Guide channels 6
            control SPS
            max. bar length 3.200 mm
            bar material dia. min. 35 mm
            bar material dia. max. 65 mm
            total power requirement 2 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
            Description :
            Multi-Channel-Bar-Feeding-System
            BREUNING IRCO - 65.6 196.6

            - has been installed at a Mori Seiki ZL 200 SMC


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier IRCO ILS-RBE 7208


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03051 · Bar Stock Carrier

          IRCO - ILS-RBE 7208 - - 1999 -

          Technical details
          diameter 15 mm︱length 800 mm︱
          = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm
            diameter 15 mm
            length 800 mm
            Description :
            = bar loading and de-loading magazine

            for bars up to 15 mmø, bar length 800 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier SYMCO KH-16


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03050 · Bar Stock Carrier

          SYMCO - KH-16 - - 1999 -

          Technical details
          diameter 3 - 16 mm︱length 3000 mm︱
          = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
            diameter 3 - 16 mm
            length 3000 mm
            Description :
            = bar loading magazin

            for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø



        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier FMB Turbo 3-26


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02960 · Bar Stock Carrier

          FMB - Turbo 3-26 - - 1998 -

          Technical details
          diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱
          Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26
            diameter 26 mm
            length 3200 mm
            total power requirement 1 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 4,5 x 0,8 x 1,35 m
            Description :
            Bar feeder FMB Turbo 3-26

            1 channel and bar pusher for 26mm
            Bar length max. 3200 mm
            Was attached to Gildemeister Ergomat TDA 26



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB DNH 42/3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03060 · Bar Stock Carrier

          TRAUB - DNH 42/3000 - - 1998 -

          Technical details
          bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱
          = bar loading magazine, compressed air controlled
            bar material dia. 12 - 42 mm
            bar length 3200 mm
            feed speeds 220 mm/sec
            return speed 440 mm/sec
            feed power bis 400 Nm
            compressed air max. 6 bar
            filling capacity 22 Stangen x ø 12 mm
            filling capacity 13 Stangen x ø 20 mm
            filling capacity 7 Stangen x ø 42 mm
            hexagon material bis SW 27 mm
            square material bis SW 20 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,83 t
            dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m
            Description :
            = bar loading magazine, compressed air controlled


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier HYDROBAR LNS - THB-42-2,4


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002243 · Bar Stock Carrier

          HYDROBAR - LNS - THB-42-2,4 - - 1996 -

          Technical details
          diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱
          Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,
            diameter 42 mm
            length 1500 mm
            voltage 380 V / 50 Hz
            total power requirement 1,1 kW
            weight of the machine ca. 0.4 t
            Description :
            Rod guidance pipe, diameter 42 x 2400 mm length,
            2 columns, 1 hydraulic aggregate,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB 45/26


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00388 · Bar Stock Carrier

          TRAUB - 45/26 - - 1984/96 -

          Technical details
          diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱
            diameter 45 mm
            length 4400 mm
            total power requirement 1,0 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 5 x 0,4 x 1,2 m


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Toolholder

          used Other accessories for machine tools Toolholder SCHAFTFRAESER Carbide milling cutter


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80226 · Toolholder

          SCHAFTFRAESER - Carbide milling cutter - - used and unused -

          Technical details
          tool clamping area 0 mm︱weight 0 t︱
          Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!
            Description :
            Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available:
            Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm

            cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder Multifix C3B 32160


          • Sachsenring Werkzeug Maschinen GmbH
          • Talstr. 77 B
          • 09337 Hohenstein-Ernstthal
          • Deutschland

          • +49 (0)3723 / 6684755
            +49 (0)3723 / 6684750
          • info@swmgmbh.de
            swmgmbh.de
          #2038-5160E · Toolholder

          Multifix - C3B 32160 - - unbenutzt -

          Technical details
          tool clamping area 160 x 32 mm mm︱weight 3,7 kg︱Dimension C
          Multifix, quick change - turning tool holder, C3 B32160, size C, unused stock items
            tool clamping area 160 x 32 mm mm
            weight 3,7 kg
            Dimension C
            Description :
            Multifix, quick change - turning tool holder,
            C3 B32160, size C, unused stock items


        • Sachsenring Werkzeug Maschinen GmbH
        • Talstr. 77 B
        • 09337 Hohenstein-Ernstthal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder Multifix C3S 40150


          • Sachsenring Werkzeug Maschinen GmbH
          • Talstr. 77 B
          • 09337 Hohenstein-Ernstthal
          • Deutschland

          • +49 (0)3723 / 6684755
            +49 (0)3723 / 6684750
          • info@swmgmbh.de
            swmgmbh.de
          #2038-5164E · Toolholder

          Multifix - C3S 40150 - - unbenutzt -

          Technical details
          tool clamping area 150 x 40 mm mm︱weight 3,6 kg︱Dimension C
          Multifix, quick change - turning tool holder, C3S 40150, size C, unused stock items
            tool clamping area 150 x 40 mm mm
            weight 3,6 kg
            Dimension C
            Description :
            Multifix, quick change - turning tool holder,
            C3S 40150, size C, unused stock items


        • Sachsenring Werkzeug Maschinen GmbH
        • Talstr. 77 B
        • 09337 Hohenstein-Ernstthal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder Unbekannt


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-14010 · Toolholder

          Unbekannt - - - unbekannt -

          Technical details
          10 Aufnahmen Karussell︱amount 2 STK︱tool clamping area SK mm︱weight 0,1 t︱
            10 Aufnahmen Karussell
            amount 2 STK
            tool clamping area SK mm
            weight 0,1 t


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder LISTA SK50


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1856 · Toolholder

          LISTA - SK50 - - unbekannt -

          Technical details
          tool clamping area / mm︱weight / t︱
            tool clamping area / mm
            weight / t


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder TUL KELCH SK50


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1897 · Toolholder

          TUL KELCH - SK50 - - unbekannt -

          Technical details
          tool clamping area / mm︱weight 250 gr︱tool adaptor SK50
          30 pieces available Condition: used Price per piece EUR 10.00 net Shipping is possible minimum order quantity 5 pcs
            tool clamping area / mm
            weight 250 gr
            tool adaptor SK50
            Description :
            30 pieces available

            Condition: used

            Price per piece EUR 10.00 net
            Shipping is possible
            minimum order quantity 5 pcs


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder TUL KELCH SK40


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1898 · Toolholder

          TUL KELCH - SK40 - - unbekannt -

          Technical details
          tool clamping area / mm︱weight 250 gr︱tool adaptor SK40
          approx. 200 pieces available Condition: used Price per piece EUR 10.00 net Shipping is possible minimum order quantity 5 pcs
            tool clamping area / mm
            weight 250 gr
            tool adaptor SK40
            Description :
            approx. 200 pieces available

            Condition: used

            Price per piece EUR 10.00 net
            Shipping is possible
            minimum order quantity 5 pcs


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder WOTAN SK50


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80312 · Toolholder

          WOTAN - SK50 - - -

          Technical details
          tool clamping area SK50 mm︱weight 1 kg︱
            tool clamping area SK50 mm
            weight 1 kg


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder Eppinger VDI 40


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09195 · Toolholder

          Eppinger - VDI 40 - - -

          Technical details
          tool clamping area 1 - 32 mm︱weight 8 - 12 kg︱
          Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m².
            tool clamping area 1 - 32 mm
            weight 8 - 12 kg
            Description :
            Driven toolholders
            1: Eppinger, Mod. 6035-3: 270 Euro
            2: Eppinger, Mod. 6052: 360 Euro
            3: Eppinger, Mod. 6049-2: 360 Euro
            4: Wendel, Mod. A 3930: 720 Euro
            5: Eppinger, Mod. 10809-1-3: 720 Euro
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder KOMET FG IV


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80336 · Toolholder

          KOMET - FG IV - - -

          Technical details
          tool clamping area 150x18 mm︱weight 0,001 t︱
          turning tool with insert - like new. L/W/H: 250x40x100 mm
            tool clamping area 150x18 mm
            weight 0,001 t
            Description :
            turning tool with insert - like new.
            L/W/H: 250x40x100 mm


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder HERTEL SPABO 114.300


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80337 · Toolholder

          HERTEL - SPABO 114.300 - - -

          Technical details
          tool clamping area 50x50 mm︱weight 0,003 t︱
          turning tool with insert - like new. L/W/H: 400x50x50 mm
            tool clamping area 50x50 mm
            weight 0,003 t
            Description :
            turning tool with insert - like new.
            L/W/H: 400x50x50 mm


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z01049 · Toolholder

          - - - -

          Technical details
          tool clamping area . mm︱weight . t︱Heat output capacity . KW︱air volumen m³/h︱weight of the machine ca. t︱dimensions of the machine ca. m︱tool taper bore ︱number ︱thread pitch mm︱total power requirement kW︱
          Post mounting screws and threaded rods for T-slot nutsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            tool clamping area . mm
            weight . t
            Heat output capacity . KW
            Description :
            Post mounting screws and threaded rods for T-slot nutsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder  Multifix Halter


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z01134 · Toolholder

          - Multifix Halter - - -

          Technical details
          tool clamping area . mm︱weight . t︱
          approx. 53 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            tool clamping area . mm
            weight . t
            Description :
            approx. 53 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder Fabr. unbekannt/unknown VDI 40


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09218 · Toolholder

          Fabr. unbekannt/unknown - VDI 40 - - -

          Technical details
          tool clamping area 20 - 70 mm︱weight 5 - 8 kg︱
          Price is per piece, if you are interested please contact us. Machine dealer with own stock of 1600 m².
            tool clamping area 20 - 70 mm
            weight 5 - 8 kg
            Description :
            Price is per piece, if you are interested please contact us.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Toolholder NN


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F409 · Toolholder

          NN - - - -

          Technical details
          Spindle taper Capto 8 ︱Speed - RPM︱Maximum speed - RPM︱
            Spindle taper Capto 8
            Speed - RPM
            Maximum speed - RPM
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          TRAUB - BREUNING IRCO - FMB - LNS - IRCO - HYDROBAR - SYMCO -