---

PRECISION - FLATWIRE - TANDEM ROLLING MILL Construction: ANDRITZ Typ: 160 T4 Year: 1989 Working range: for example: Entry: round- Ø 1,6 - 4,5 mm steel Exit: Ø 2 - 9 mm x 0,25 -0,40 mm Number Working Rolls: 4 Pieces Rolling speed: max. 600 m/min. The Line consists of: ================= - Decoiler weight: max. 1300 kg, drive motor 10 kW - vertical und horizontal straightening machine - Duo Working Roll No. 1 Rolls: Ø 160 mm, drive motor 58 kW - Duo Working Roll No. 2 Rolls: Ø 160 mm, drive motor 58 kW - Turk-head - Rolling Mill - Duo Working Roll Nr. 3 Rolls: Ø 130 mm, drive motor 42 kW - Turk-head - Rolling Mill - Duo Working Roll Nr. 4 Rolls: Ø 130 mm, drive motor 42 kW - Spooler, loading capacity max. 800 kg, drive motor 13 kW Total weight: approx. 36 to.

---

MACHINE TO RIB CONCRETE STEEL, Turk heads constr. Arnold type AS looo Hyd. year 1972 working range approx. 5 - 13 mm Motors for: axial adjustement: 0,55 kW, 380 V, 50 Hz automatic closing: each 0,8 kW, 380 V, 50 Hz The machine consists of : ===================== - crossed roller for feeding - box type die holder - 2 turk heads (water cooled), one of them axially adjustable by a geared motor. Both turk heads automatically closable. required floor space 35oo x 12oo x 1300 mm

---

WIRE ROLLING MILL constr. Arnold type: AS 700 DU OG year: 1973 working range: 11 mm

---

HOT ROLLING-MILL for SPECIAL PROFILES coil-to-bar & coil-to-coil Manufacturer: BOECKER u. VOLKENBORN (Germany) Coil (entry): max dia. 35 mm max weight 3.000 kg Production: special profiles in bars or coils, section up to 960 mm2 medium and high carbon steel, special alloys Rolling-Mill complete with: - Head/Tail Welder Pay-off Roll-Guide - Pre-straightener (horizontal + vertical) - Fischer/Disa Shot-Blaster - Dust filter - Conduction Heating Furnace Horizontal - Mill-Stand Horizontal/Vertical - Mill-Stand Horizontal Mill-Stand - Straightening Rolls - Flying Shear - Cooling-Bed for bars - Pinch-roll Re-coiler - Re-coiler - Electric equipment - Tooling Spares Complete system. More information on request.

---

Q U A T R O W I R E ( S T R I P ) R O L L I N G M I L L Constr.: BÜHLER Type: 120/260 x 400 year: mid 1990 condition: very good working range: Lately the machine was used to roll steel wire with 0,2% C. With respective rolls the mill possibly might be used to roll strips as well. inlet Ø : 0,47 - 1,40 mm (number of wires 210 - 156, layed one near the other on one roll) outlet: width / thickness: from 0,50 / 0,40 till 1,45 / 1,27 mm number of wires: dto.) tolerance: thickness: +/- 10 µm width: +/- 20 µm roller-Ø working roller: supporting roller 120 mm 260 mm roller width 400 mm 400 mm usable width: 300 mm rolling force max. 1700 kN rolling speed: 0 - 50 m/min. Hydr. counter bending and spreading of roller Pmax.: 100 bar electrically-motorically adjunstment of upper rollers working direction: from left to right DC drive: rolling mill: 67,5 kW, central adjustment 2 x 13,4 kW connection: 380 V, 50 Hz with roller- inner and surface cooling. Scope of supply: - Rolling mill with operating manual - Hydraulics - Cooling unit - Electrical cabinet, SIEMENS Control - Spare parts and accessories, as far as available More photos are available upon demand. Weight: approx. 10 to.

working area 15 an 3,6 mm︱Number of stands 4 ︱material NE ︱

---

MULTIPLE WIRE ROLLING MILL Constr. Bühler Type MW 120 Year: 1988 working range: inlet wire diameter: 15 mm 4 x rolling passages up to 3,6 mm rolling profile - entry mechanical strength 200-300 N/qmm - exit mechanical strength up to 800 N/qmm comparable to Cu or brass alloys electrical cabinet with Siemens S5 control each rolling stand can be adjusted individually connection: 75 kVA

---

2-rolls Wire Rolling-mill Wire rolling mill with 1 horizontal pair of rolls Barrel size: length 100 mm, Ø 150 mm Inlet wire Ø ca. 1,0 - 15,0 mm Opening adjustment with handwheel with dancer controller arm and dual capstan 500 / 200 mm - without motors and electrics

---

HOT ROLLING MILL FOR BARS AND WIRES Construction KOCKS New 1990 Condition very good Working range Entry Bars: Exit Bars: Ø 13 - 20 mm +/- 0,2 Ø 12 - 18 mm for 20 mm entry Length 2600 - 5800 mm Ø 6 - 11 mm for 13 mm entry Length < 18000 mm max. Entry Wire: Exit Wires: Ø 12 - 13 mm +/- 0,2 Ø 11 - 5,6 mm Length 300 m max. Coil outer Ø: 915 mm, inner Ø: 610 mm (Coil outer Ø: < 1200 mm) height: 500 mm Feeding speed: 0,35 - 0,9 m/sec. (depending on the material) Runout speed: 3 m/sec. maxi Rolling speed: Synchronized Rolling heat: 550 - 1000 °C Conductive electrical heating: Bars: 2 electrodes - Wire: heating of rolls (JOULE effect) Cooling: With water Adjusting of rolls: Centrally Power supply: Rolling mill: 200 kW, 380 V, AC Heating: 650 KVA, 380 V, AC Air: 5 bar - 100 m³/hour Cooling water: 5 bar - 75.1 m³/hour - T Entry = 27°C The complete line consists of: - Decoiler with 3 opening rolls, capacity: up to 1 to., Coil outer dia.: 1.500 mm - Feeding/prestraightening unit with 5 horiz. and 5 vertical rolls - Heating unit for bars and coils - Rotating shear - 8 stand rolling mill, each with 3 rolls at 120° degrees, the rolls are turning for another 180° degrees from one stand to the other - main motor and couplings, drive shafts - Runout table/channel for bars - Coiler for wires - Electrical cabinets, operating panels - Hydraulics VIDEO: Showing the machine in running condition is available upon request. Technical evaluation / Are available upon request as well. feasability study / more photos:

---

Wire Rolling Mill Fabr. MINO Workingrange: Input size. 5,5 -18 mm Ø Finish sitze. width 8 - 25 mm thickness 1,5 - 6 mm Vmax: 200 m/min The line consists of: - pre-straightener - descaler (3 turbines) - rolling mill with 3 stands and Vollmer thickness measuring - spuler (max 2 to. Coilw.) -complete with electrics Weight: approx. 60 to.