bending machine horizontal

pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱

---

• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

300 kN︱stroke length max. 235 mm︱ 200x24 mm︱bending capacity max. - round 60x4,0 mm︱toolpiece height max. 250 mm︱ 660x1250 mm︱work height max. 900 mm︱return speed 20 mm/sec︱working feed 10 mm/sec︱total power requirement 3 kW︱weight 950 kg︱

---

Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

pressure 100 kN︱stroke 0-200 mm︱table-size 450 x 1000 mm︱working speed: 6-10 mm/ sec.︱return speed 20 mm/sec︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 1,5 kW︱bending capacity max. - round 42x3,2 mm︱ 150x10 mm︱weight 320 kg︱dimensions 1010x480x1120 mm︱

---

pressure 40 t︱stroke 285 mm︱table-size 660 x 1250 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,5 t︱total power requirement 4,0 kW︱dimensions of the machine ca. 1,45 x 0,65 x 1,8 m︱

---

Equipment: - hydraulic horizontal bending machine - solid work surface stabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch

200 kN︱stroke length max. 200 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 480x1060 mm︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 2,2 kW︱ 200x12 mm︱bending capacity max. - round 48x4,0 mm︱weight 500 kg︱Overall size 1010x480x1120 mm︱

---

Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm

pressure 20 t︱stroke 185 mm︱table-size 480 x 1060 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 0,53 t︱total power requirement 2,2 kW︱dimensions of the machine ca. 1150 x 500 x 1200 mm︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch

400 kN︱stroke length max. 285 mm︱working feed 9 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 930 mm︱toolpiece height max. 250 mm︱total power requirement 4 kW︱ 200x26 mm︱bending capacity max. - round 60x5,0 mm︱weight 1050 kg︱

---

Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

pressure 80 t︱stroke 285 mm︱table-size 750 x 1425 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,7 t︱total power requirement 10,0 kW︱dimensions of the machine ca. 1,5 x 0,75 x 1,8 m︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

pressure 32 t︱stroke 250 mm︱table-size 500 x 760 mm︱work height max. 925 mm︱bending speed max. 25 mm/sec︱tank capacity 80 l︱Pressure power 320 bar︱total power requirement 5,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,3 x 0,5 x 1,3 m︱

---

max.bending height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

pressure 200 t︱stroke 550 mm︱table-size 700 x 700 mm︱work speed 0 - 0,6 m/min︱total power requirement 18,5 kW︱weight of the machine ca. 12500 kg︱dimensions of the machine ca. mm︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

weight of the machine ca. 1,2 t︱serial number 422A045 ︱ ja ︱

---

pressure / t︱stroke / mm︱table-size / mm︱weight of the machine ca. 65000 kg︱

---

Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

bending radius min. 190 mm︱square edge steel 20 x 20 mm︱flat steel 100 x 7 mm︱round bar steel 22,0 mm︱L-beam 100 x 10 mm︱weight of the machine ca. 34,0 kg.︱

---

properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop

pressure 20 t︱stroke 185 mm︱flat steel 200 x 12 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 480 x 1060 mm︱total power requirement 2,2 kW︱motor 400 Volt 50 Hz︱oil volume 12,0 ltr.︱weight 530 kg︱range L-W-H 1150x480x1200 mm︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

pressure 40 t︱stroke 285 mm︱flat steel 250 x 24 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 660 x 1250 mm︱total power requirement 4,0 kW︱motor 400 Volt 50 Hz︱weight 1450 kg︱range L-W-H 1450 x 650 x 1800 mm︱oil volume 40,0 l︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

square edge steel 16 x 16 mm︱flat steel 100 x 5 mm︱L-beam 60 x 8 mm︱bending radius min. 190 mm︱round bar steel 18,0 mm︱weight of the machine ca. 33,0 kg.︱

---

Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

pressure 80 t︱stroke 285 mm︱flat steel 300 x 25 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 750 x 1425 mm︱total power requirement 10,0 kW︱motor 400 Volt 50 Hz︱weight 1700 kg︱range L-W-H 1500 x 750 x 1800 mm︱oil volume 120 l︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

pressure 70T t︱stroke 300 mm︱table-size - mm︱

---

Capacity: 70 T Horizontal Stroke cylinder: 300 mm Machine weight: 1.700 kg

Capacity 30 T︱Stroke 350 mm︱Machine dimensions (lxwxh) - mm︱

---

Lying press With electric conveyor With pneumatic clamp Machine can be converted into strip bending machine Height: 390 mm Open: 700 mm Closed: 350 mm Stroke cylinder: 350 mm

table length 3000 mm︱table width 1500 mm︱burner heads 1 ︱Control CNC ︱workpiece weight 1500 kg︱total power requirement 21 kW︱weight of the machine ca. 10,4 t︱dimensions of the machine ca. 5,2 x 4,2 x 2,62 m︱

---

CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM

table length 3000 mm︱table width 1500 mm︱burner heads Precitec ProCutter ︱laser capacity in Watt 6000 ︱x-axis 3050 mm︱z-axis 150 mm︱y-axis 1550 mm︱total power requirement 21 kW︱dimensions 9190 x 3710 x 2200 mm︱weight of the machine ca. 11200 kg︱

---

Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - max.load 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

table length 3000 mm︱table width 1500 mm︱burner heads Precitec ProCutter ︱laser capacity in Watt 4000 ︱x-axis 3050 mm︱z-axis 150 mm︱y-axis 1550 mm︱total power requirement 22 kW︱dimensions 9190 x 3710 x 2200 mm︱weight of the machine ca. 11200 kg︱

---

Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

table length 3050 mm︱table width 1530 mm︱burner heads 0 ︱thickness at "Niro-steel" 24 mm︱plate thickness alu 14 mm︱working area 3050 x 1530 mm︱stroke z-axis 130 mm︱speed y-axis 170 mm/min︱speed z-axis 50 mm/min︱positioning accuracy 0,05 mm︱repeating accuracy 0,02 mm︱total power requirement 75 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱

---

demonstration machine FANUC 6000 W fiber laser source, automat. beam centering, DENER Smart Nest, Air Dryer, DENER Filter, Camera & Surveillance, air-conditioned control cabinet, Precitec Procutter cutting head, shuttle table, automatic nozzle cleaning, central lubrication, scrap pan for small parts etc. dirt, METALIX Pronest automatic nesting, multi-chamber suction system, warning lamp

Working hours machine 19744 (17.01.2024) h︱Working hours beam on 6018 (17.01.2024) h︱Laser power 6000 Watt︱Control AMNC 3i ︱Length 10136 mm︱Width 2840 mm︱Machine weight 9500 kg︱

---