bending machine horizontal

pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱

---

• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

300 kN︱stroke length max. 235 mm︱ 200x24 mm︱bending capacity max. - round 60x4,0 mm︱toolpiece height max. 250 mm︱ 660x1250 mm︱work height max. 900 mm︱return speed 20 mm/sec︱working feed 10 mm/sec︱total power requirement 3 kW︱weight 950 kg︱

---

Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

pressure 100 kN︱stroke 0-200 mm︱table-size 450 x 1000 mm︱working speed: 6-10 mm/ sec.︱return speed 20 mm/sec︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 1,5 kW︱bending capacity max. - round 42x3,2 mm︱ 150x10 mm︱weight 320 kg︱dimensions 1010x480x1120 mm︱

---

pressure 40 t︱stroke 285 mm︱table-size 660 x 1250 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,5 t︱total power requirement 4,0 kW︱dimensions of the machine ca. 1,45 x 0,65 x 1,8 m︱

---

Equipment: - hydraulic horizontal bending machine - solid work surface stabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch

200 kN︱stroke length max. 200 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 480x1060 mm︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 2,2 kW︱ 200x12 mm︱bending capacity max. - round 48x4,0 mm︱weight 500 kg︱Overall size 1010x480x1120 mm︱

---

Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm

pressure 20 t︱stroke 185 mm︱table-size 480 x 1060 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 0,53 t︱total power requirement 2,2 kW︱dimensions of the machine ca. 1150 x 500 x 1200 mm︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch

400 kN︱stroke length max. 285 mm︱working feed 9 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 930 mm︱toolpiece height max. 250 mm︱total power requirement 4 kW︱ 200x26 mm︱bending capacity max. - round 60x5,0 mm︱weight 1050 kg︱

---

Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

pressure 80 t︱stroke 285 mm︱table-size 750 x 1425 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,7 t︱total power requirement 10,0 kW︱dimensions of the machine ca. 1,5 x 0,75 x 1,8 m︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

pressure 32 t︱stroke 250 mm︱table-size 500 x 760 mm︱work height max. 925 mm︱bending speed max. 25 mm/sec︱tank capacity 80 l︱Pressure power 320 bar︱total power requirement 5,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,3 x 0,5 x 1,3 m︱

---

max.bending height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

pressure 200 t︱stroke 550 mm︱table-size 700 x 700 mm︱work speed 0 - 0,6 m/min︱total power requirement 18,5 kW︱weight of the machine ca. 12500 kg︱dimensions of the machine ca. mm︱

---

- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch

weight of the machine ca. 1,2 t︱serial number 422A045 ︱ ja ︱

---

pressure / t︱stroke / mm︱table-size / mm︱weight of the machine ca. 65000 kg︱

---

Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

bending radius min. 190 mm︱square edge steel 20 x 20 mm︱flat steel 100 x 7 mm︱round bar steel 22,0 mm︱L-beam 100 x 10 mm︱weight of the machine ca. 34,0 kg.︱

---

properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop

pressure 20 t︱stroke 185 mm︱flat steel 200 x 12 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 480 x 1060 mm︱total power requirement 2,2 kW︱motor 400 Volt 50 Hz︱oil volume 12,0 ltr.︱weight 530 kg︱range L-W-H 1150x480x1200 mm︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

pressure 40 t︱stroke 285 mm︱flat steel 250 x 24 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 660 x 1250 mm︱total power requirement 4,0 kW︱motor 400 Volt 50 Hz︱weight 1450 kg︱range L-W-H 1450 x 650 x 1800 mm︱oil volume 40,0 l︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

square edge steel 16 x 16 mm︱flat steel 100 x 5 mm︱L-beam 60 x 8 mm︱bending radius min. 190 mm︱round bar steel 18,0 mm︱weight of the machine ca. 33,0 kg.︱

---

Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

pressure 80 t︱stroke 285 mm︱flat steel 300 x 25 mm︱working feed 10,0 mm/sec︱return speed 10,0 mm/min︱work height max. 930 mm︱table: 750 x 1425 mm︱total power requirement 10,0 kW︱motor 400 Volt 50 Hz︱weight 1700 kg︱range L-W-H 1500 x 750 x 1800 mm︱oil volume 120 l︱

---

Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of bend end point & retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

pressure 70T t︱stroke 300 mm︱table-size - mm︱

---

Capacity: 70 T Horizontal Stroke cylinder: 300 mm Machine weight: 1.700 kg

Capacity 30 T︱Stroke 350 mm︱Machine dimensions (lxwxh) - mm︱

---

Lying press With electric conveyor With pneumatic clamp Machine can be converted into strip bending machine Height: 390 mm Open: 700 mm Closed: 350 mm Stroke cylinder: 350 mm

pressure 70 t︱chamfer lenght 2600 mm︱distance between columns 2750 mm︱stroke 60 mm︱total power requirement kW︱weight of the machine ca. 4,3 t︱dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m︱

---

Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

pressure 185 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱throat 500 mm︱ 300 mm︱dayligth 500 mm︱work height max. 950 mm︱working feed 0-10 mm/sec︱return speed 140 mm/sec︱engine output 18,5 kW︱control DELEM DA-66T ︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 4000x2600x3400 mm︱

---

pressure 200 t︱chamfer lenght 3060 mm︱stroke 350 mm︱arm length 500 mm︱engine output 18,5 kW︱

---

pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱control CYBELEC VisiTouch ︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱

---

Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate

pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱throat 410 mm︱table width 60 mm︱table height 870 mm︱dayligth 530 mm︱piston stroke 260 mm︱ 200 mm/sec︱return speed 160 mm/sec︱ 1000 mm︱ 160 mm︱engine output 15 kW︱quantity of oil 180 l︱Control CYBELEC VisiTouch 19-2D ︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 4100x1800x2700 mm︱

---