,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          coil line

          Machinelist: coil line


          coil line

          used Sheet metal working / shaeres / bending coil line 1SCHLEICHER/GSW


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-531 · coil line

          1SCHLEICHER/GSW - - - unbekannt -

          Technical details
          material width 300 mm︱coil weight 3 t︱material thickness 2 - 4 mm︱
          CNC roll feed, Make GSW, Type WVE 400/160 - weight 50/80 kg Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW
            material width 300 mm
            coil weight 3 t
            material thickness 2 - 4 mm
            Description :
            CNC roll feed, Make GSW, Type WVE 400/160
            - weight 50/80 kg

            Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160
            - band width 300 mm
            - band thickness 2 – 4 mm
            - cross cut 1200 mm²
            - voltage 220/380 V 50 Hz
            - total power requirement 3,1 kW

            coiler with press roll, Make Schleicher, Type H-3
            - Coil weight 3 t
            - Band width 400 mm
            - voltage 220/380 V 50 Hz
            - total power requirement 3,92 kW



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line GSW SHR 5000 / VCRL 650


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103046 · coil line

          GSW - SHR 5000 / VCRL 650 - - 2000 - konventionell

          Technical details
          material width 600 mm︱coil weight 5,0 t︱material thickness - 5,0 mm︱coil internal diameter 360 - 660 mm︱coil external diameter 1500 mm︱no. of straightening rolls 9 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱material cross-cut 1600 mm²︱power requirement kW︱weight of feeeder-straightener 2,5 t︱weight of decoiler 1,5 t︱dimensions feeder-straightener (WxDxH) 1,7 x 1,7 x 2,6 mm︱dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm︱
          Feeder-straightening machine VCRL 650 (year of manufacture1994 / overhauled 2001) with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting Decoiler SHR 5000 (year of manufacture 2000) with hydraulic expansion, snubber roll
            material width 600 mm
            coil weight 5,0 t
            material thickness - 5,0 mm
            coil internal diameter 360 - 660 mm
            coil external diameter 1500 mm
            no. of straightening rolls 9
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            material cross-cut 1600 mm²
            weight of feeeder-straightener 2,5 t
            weight of decoiler 1,5 t
            dimensions feeder-straightener (. 1,7 x 1,7 x 2,6 mm
            dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm
            Description :
            Feeder-straightening machine VCRL 650
            (year of manufacture1994 / overhauled 2001)
            with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting
            Decoiler SHR 5000 (year of manufacture 2000)
            with hydraulic expansion, snubber roll


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 2352 B-FPS / SC 12-FQ


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083096 · coil line

          DREHER - 2352 B-FPS / SC 12-FQ - - 1997 - Siemens S 5

          Technical details
          material width 300 mm︱coil weight 2 x 1,25 t︱material thickness 0,4 - 1,2 mm︱coil internal diameter 320 - 420 mm︱coil external diameter 1300 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱number of draw-in rolls 2 ︱roll diameter 30 mm︱speed 3 - 30 m/min︱feed length 0 - 9999,9 mm︱power requirement 3,0 + 2,5 kW︱weight of decoiler 0,7 t︱dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm︱weight of straightening machine 0,45 t︱dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm︱weight of the feeder 0,4 t︱dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm︱
          Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls
            material width 300 mm
            coil weight 2 x 1,25 t
            material thickness 0,4 - 1,2 mm
            coil internal diameter 320 - 420 mm
            coil external diameter 1300 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            number of draw-in rolls 2
            roll diameter 30 mm
            speed 3 - 30 m/min
            feed length 0 - 9999,9 mm
            power requirement 3,0 + 2,5 kW
            weight of decoiler 0,7 t
            dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm
            weight of straightening machine 0,45 t
            dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm
            weight of the feeder 0,4 t
            dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm
            Description :
            Universal straightening machine SC 12-FQ
            with infinitely variable drive
            double decoiler 2352 B-FPS
            WITHOUT drive, with hydraulic expansion, pneumatic lag brake
            electronic roll feed WAV-RDS-2Z, modell 1082 B
            with AC-Servomotor, pneumatic intermediate lifting of the rolls


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line HENSEL BRMS 4/500/10  /  BSH 3-500  /


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-194014V · coil line

          HENSEL - BRMS 4/500/10 / BSH 3-500 / - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2,5 t︱material thickness 0,2 - 3,0 mm︱coil internal diameter 480 - 530 mm︱coil external diameter 1300 mm︱material cross-cut 1000 mm²︱no. of straightening rolls 10 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱roll diameter 120 mm︱Material thickness feeder 0,2 - 5,0 mm︱material cross-cut feeder 1000 mm²︱roll diameter 100 mm︱speed 20 m/min︱power requirement 4,0 + 1,1 kW︱weight of straightening machine 2,3 t︱dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm︱weight of decoiler 0,95 t︱dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm︱weight feeder t︱
          Straightening machine HENSEL BRMS 4/500/10 with infinitely variable drive Decoiler HENSEL BSH 3-500 mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll Electronic roll feed HENSEL EVX 500 with hydraulic intermediate lifting of the rolls Material thickness of feeder approx. 0,2 - 5,0 mm with coil loop control via light guard
            material width 500 mm
            coil weight 2,5 t
            material thickness 0,2 - 3,0 mm
            coil internal diameter 480 - 530 mm
            coil external diameter 1300 mm
            material cross-cut 1000 mm²
            no. of straightening rolls 10
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            roll diameter 120 mm
            Material thickness feeder 0,2 - 5,0 mm
            material cross-cut feeder 1000 mm²
            roll diameter 100 mm
            speed 20 m/min
            power requirement 4,0 + 1,1 kW
            weight of straightening machine 2,3 t
            dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm
            weight of decoiler 0,95 t
            dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm
            Description :
            Straightening machine
            HENSEL BRMS 4/500/10
            with infinitely variable drive
            Decoiler
            HENSEL BSH 3-500
            mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll
            Electronic roll feed
            HENSEL EVX 500
            with hydraulic intermediate lifting of the rolls
            Material thickness of feeder approx. 0,2 - 5,0 mm
            with coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 AV-RA2 / 2370 B


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1740 · coil line

          DREHER - 1676 AV-RA2 / 2370 B - - 1995 -

          Technical details
          material width 200 mm︱coil weight 1,5 t︱material thickness 0,8 - 4,2 mm︱straightening roll diameter 80 mm︱Number of straightening rolls 7 Pcs.︱
          Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available
            material width 200 mm
            coil weight 1,5 t
            material thickness 0,8 - 4,2 mm
            straightening roll diameter 80 mm
            Number of straightening rolls 7 Pcs.
            Description :
            Coil turner 2370 B
            Load capacity 1.5 ton.
            Bandwidth 300 mm
            Coil inner diameter: 400 - 500 mm
            Arm length per arm: 670 mm
            Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm
            Weight: 760 kg.

            Straightener Dreher 1676 AV-RA2
            Material width: 200 mm
            Material thickness: 08 - 4.2 mm
            Number of straightening rollers: 7
            Number of pull rollers: 4
            Straightening rollers diameter: 80 mm

            Would be down by a running press
            Documents circuit diagrams, operating instructions etc. available


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line KOHLER / WEINGARTEN 50.650/9-7500.1 / WEP 65


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233027 · coil line

          KOHLER / WEINGARTEN - 50.650/9-7500.1 / WEP 65 - - 1995 - konventionell

          Technical details
          material width 650 mm︱coil weight 7,5 t︱material thickness 0,6 - 4,0 mm︱coil internal diameter 460 - 530 (630) mm︱coil external diameter 1300 mm︱material cross-cut 1300 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 60 mm︱number of draw-in rolls ︱roll diameter mm︱speed 1 - 30 m/min︱power requirement 30,0 kW︱weight of straightening machine t︱dimensions straightener (WxDxH) mm︱weight of decoiler t︱dimensions decoiler (WxDxH) mm︱weight feeder t︱dimensions feeder (WxDxH) m︱
          Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard
            material width 650 mm
            coil weight 7,5 t
            material thickness 0,6 - 4,0 mm
            coil internal diameter 460 - 530 (630) mm
            coil external diameter 1300 mm
            material cross-cut 1300 mm²
            no. of straightening rolls 9
            straightening roll diameter 60 mm
            speed 1 - 30 m/min
            power requirement 30,0 kW
            Description :
            Straightening machine KOHLER 50.650/9
            with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette
            Decoiler KOHLER 7500.1
            with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table
            Servo roll feed WEINGARTEN WEP 65
            coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line NORMATIC DY 500 X3000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163021A · coil line

          NORMATIC - DY 500 X3000 - - 1994 - konventionell

          Technical details
          material width 500 mm︱coil weight 3,0 t︱material thickness 0,2 - 2,5 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1400 mm︱no. of straightening rolls 9 ︱straightening roll diameter 40 mm︱number of inlet and outlet rolls 4 ︱material cross-cut 1200 mm²︱speed 1,5 - 30 m/min︱Power capacity kW︱dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m︱weight decoiler 1,1 t︱dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m︱weight straightener 3,0 t︱
          Straightening machine RYD 40 x 500 hydraulic inlet guide Decoiler DY 500 x 3000 with hydraulic expansion, hydraulic coil lifting device elektronic roll feed AESL 500-2,8 can be offered without or with putting into operation in given condition
            material width 500 mm
            coil weight 3,0 t
            material thickness 0,2 - 2,5 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1400 mm
            no. of straightening rolls 9
            straightening roll diameter 40 mm
            number of inlet and outlet rolls 4
            material cross-cut 1200 mm²
            speed 1,5 - 30 m/min
            dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m
            weight decoiler 1,1 t
            dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m
            weight straightener 3,0 t
            Description :
            Straightening machine RYD 40 x 500
            hydraulic inlet guide
            Decoiler DY 500 x 3000
            with hydraulic expansion, hydraulic coil lifting device
            elektronic roll feed AESL 500-2,8
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 E/RDS  /  2380 FM-FPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183063A · coil line

          DREHER - 1676 E/RDS / 2380 FM-FPS - - 1994 - konventionell

          Technical details
          material width 650 mm︱coil weight 3,5 t︱material thickness 0,8 - 3,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 80 mm︱number of inlet rolls 4 ︱coil internal diameter 460 - 530 mm︱coil external diameter 1400 mm︱weight straightener 1,0 t︱weight decoiler 0,9 t︱dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m︱dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m︱
          Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic
            material width 650 mm
            coil weight 3,5 t
            material thickness 0,8 - 3,0 mm
            no. of straightening rolls 7
            straightening roll diameter 80 mm
            number of inlet rolls 4
            coil internal diameter 460 - 530 mm
            coil external diameter 1400 mm
            weight straightener 1,0 t
            weight decoiler 0,9 t
            dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m
            dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m
            Description :
            Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4
            with infinitely variable drive
            Decoiler DREHER 2380 FM-FPS Modell 891/5
            motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll
            coil loop control Ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line TEAP AMDC150+RM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15596 · coil line

          TEAP - AMDC150+RM - - 1993 -

          Technical details
          material width 350 mm︱coil weight 2x 1 t︱material thickness 3 mm︱coil internal dia. 480-530 mm︱coil outside dia. 1400 mm︱
            material width 350 mm
            coil weight 2x 1 t
            material thickness 3 mm
            coil internal dia. 480-530 mm
            coil outside dia. 1400 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DIMECO 1676 EV / 2382 FFPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133013 · coil line

          DIMECO - 1676 EV / 2382 FFPS - - 1990 - konventionell

          Technical details
          material width coil line 600 mm︱coil weight 2 x 3,5 t︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material thickness coil line 0,5 - 3,0 mm︱no. of straightening rolls 7 ︱no. of rolls at in- and outlet 4 ︱roll diameter 80 mm︱feed length 0 - 500 mm︱power requirement 10,0 kW︱weight 10,0 t︱dimensions of the coil line 8,8 x 4,0 x 2,55 m︱
          Straightening machine Dimeco, 1676 EV with inlet table andpre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden can only be offered without putting into operation - video at seller's site before dismantling available
            material width coil line 600 mm
            coil weight 2 x 3,5 t
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material thickness coil line 0,5 - 3,0 mm
            no. of straightening rolls 7
            no. of rolls at in- and outlet 4
            roll diameter 80 mm
            feed length 0 - 500 mm
            power requirement 10,0 kW
            weight 10,0 t
            dimensions of the coil line 8,8 x 4,0 x 2,55 m
            Description :
            Straightening machine Dimeco, 1676 EV
            with inlet table andpre-shaping roll, hydraulic loading bridge
            Double decoiler Dimeco 2382 FFPS
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device
            elektronic roll feed Microfeed
            kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden
            can only be offered without putting into operation - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHLEICHER


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03639 · coil line

          SCHLEICHER - - - -

          Technical details
          material width 1200 mm︱coil weight 10 t︱material thickness 8 mm︱internal diameter 500 mm︱coil outside dia. 1300 mm︱coil Schleicher ︱straightening device Schleicher ︱feed motor Schleicher ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            material width 1200 mm
            coil weight 10 t
            material thickness 8 mm
            internal diameter 500 mm
            coil outside dia. 1300 mm
            coil Schleicher
            straightening device Schleicher
            feed motor Schleicher


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine FASTI 212-30-4


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1150 · Folding Machine

          FASTI - 212-30-4 - - unbekannt -

          Technical details
          sheet width 3040 mm︱plate thickness 4 mm︱distance between columns / mm︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            sheet width 3040 mm
            plate thickness 4 mm
            distance between columns / mm
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM Machinery HBM 3100-65S


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08500 · Folding Machine

          HM Machinery - HBM 3100-65S - - neu -

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱thickness at "Niro-steel" 4,5 mm︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱total power requirement 7,4 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. 4,5 x 1,72 x 2 m︱Electric 380 Volt ︱manuel back gauge adjustable from the front 70 - 600 mm︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Video available on our website.
          Machine dealer with own stock of 1600 m².
            sheet width 3100 mm
            plate thickness 6 mm
            thickness at "Niro-steel" 4,5 mm
            daylight upper clamping 100 mm
            Bending angle 0 - 135 °
            total power requirement 7,4 kW
            weight of the machine ca. 7,6 t
            dimensions of the machine ca. 4,5 x 1,72 x 2 m
            manuel back gauge adjustable fro. 70 - 600 mm
            Oil filling exklusive
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine METALLKRAFT FSBM 1020 - 25 E


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-FSBM · Folding Machine

          METALLKRAFT - FSBM 1020 - 25 E - - NEU -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱bending angle max. 135 °︱stroke of upper beam 25 mm︱weight of the machine ca. 285 kg︱dimensions of the machine ca. 1,35 x 0,85 x 1,20 m︱
          *** PRICE: 2.045,-- EUR *** - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application
            sheet width 1020 mm
            plate thickness 2,5 mm
            bending angle max. 135 °
            stroke of upper beam 25 mm
            weight of the machine ca. 285 kg
            dimensions of the machine ca. 1,35 x 0,85 x 1,20 m
            Description :

            *** PRICE: 2.045,-- EUR ***

            - with an oblique segmented upper cheek
            - distribution segment:
            25-30-35-40-45-50-75-100-150-200-270
            - done with the foot brake application


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FALKEN ERBEND UFA 1015


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6948 · Folding Machine

          FALKEN - ERBEND UFA 1015 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 1,5 mm︱distance between columns mm︱daylight opening 100 mm︱weight of the machine ca. 330 kg︱dimensions of the machine ca. 1,6 x 0,9 x 1,45 m︱
          - Split upper, lower and rear tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual backgauge 500 mm - mobile
            sheet width 1050 mm
            plate thickness 1,5 mm
            daylight opening 100 mm
            weight of the machine ca. 330 kg
            dimensions of the machine ca. 1,6 x 0,9 x 1,45 m
            Description :
            - Split upper, lower and rear tool
            - Upper tool with quick change system
            - Quick foot clamp
            - Angle stop - lockable
            - manual backgauge 500 mm
            - mobile


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine METALLKRAFT FSBM 1020-20HSG


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-945437 · Folding Machine

          METALLKRAFT - FSBM 1020-20HSG - - NEU -

          Technical details
          Biegewinkel 150° ︱sheet width 1020 mm︱plate thickness 2,0 mm︱distance between columns -- mm︱weight of the machine ca. 0,36 t︱dimensions of the machine ca. 1,28 x 0,62 x 1,2 m︱
          Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm
            Biegewinkel 150°
            sheet width 1020 mm
            plate thickness 2,0 mm
            distance between columns -- mm
            weight of the machine ca. 0,36 t
            dimensions of the machine ca. 1,28 x 0,62 x 1,2 m
            Description :
            Manual folding machine FSBM 1020-20 HSG / 3770103

            - The workpiece is clamped using a foot pedal, so both hands remain
            free for material feed
            - Different tool variants available E, S2, HS2 and HSG
            - The strong auxiliary cylinder makes bending easier
            - Wide clearance between the upper and lower beam of up to 25 mm
            - Self-lubricating slide bearings
            - Clamping pressure of the upper beam can be easily adjusted using handy
            knurled screws
            - Adjustment of the material thickness by means of a knurled screw
            - Adjustable stop for bending angle

            Equipment details:
            FSBM 1020-20 HSG
            - With segmented goat foot tools, segmented bending bar and
            segmented bed pad
            - Segments have a hardness of HRC24-26

            VA steel 1.2 mm
            Aluminum 2.4 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BURNET SBM 2020x1,5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4030273 · Folding Machine

          BURNET - SBM 2020x1,5 - - Neu -

          Technical details
          sheet width 2020 mm︱plate thickness 1,5 mm︱daylight opening 100 mm︱Bending Angle 135 °︱weight of the machine ca. 1.300 kg︱
          Accessories / equipment: - Machine frame made of welded steel construction - segmented upper tool - motor workpiece clamping - Angle adjustment via handwheel with scale Additional equipment: - Backgauge with manual handwheel
            sheet width 2020 mm
            plate thickness 1,5 mm
            daylight opening 100 mm
            Bending Angle 135 °
            weight of the machine ca. 1.300 kg
            Description :
            Accessories / equipment:
            - Machine frame made of welded steel construction
            - segmented upper tool
            - motor workpiece clamping
            - Angle adjustment via handwheel with scale

            Additional equipment:
            - Backgauge with manual handwheel


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine METALLKRAFT MSBM 2020-15 C S motorisch


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7078 · Folding Machine

          METALLKRAFT - MSBM 2020-15 C S motorisch - - NEU -

          Technical details
          sheet width 2020 mm︱plate thickness 1,5 mm︱distance between columns -- mm︱bending angle max. +/- 135 °︱hollow max. 100 mm︱total power requirement 0,55 / 1,0 kW︱weight of the machine ca. 1,0 t︱dimensions of the machine ca. 2,68 x 0,64 x 1,1 m︱
          Heavy version with motorized drive for the upper and bending beam and segmented upper beam / 3772940 - Foot control enables the sheet metal to be positioned with both hands - The workpiece is clamped and bent using a motorized chain drive - Setting the bending angle manually, reading the angle on a scale ring - Many bending options with segmented upper beam - Exact movement of the bending beam via large flat guides - Heavy, robust welded construction Segment division: 25-30-35-40-45-50-75-100-150-200-200-270-400-400 mm VA steel: 0.8 mm Aluminum: 2.0 mm
            sheet width 2020 mm
            plate thickness 1,5 mm
            distance between columns -- mm
            bending angle max. +/- 135 °
            hollow max. 100 mm
            total power requirement 0,55 / 1,0 kW
            weight of the machine ca. 1,0 t
            dimensions of the machine ca. 2,68 x 0,64 x 1,1 m
            Description :
            Heavy version with motorized drive for the upper and bending beam and
            segmented upper beam / 3772940

            - Foot control enables the sheet metal to be positioned with both hands
            - The workpiece is clamped and bent using a motorized chain drive
            - Setting the bending angle manually, reading the angle on a scale ring
            - Many bending options with segmented upper beam
            - Exact movement of the bending beam via large flat guides
            - Heavy, robust welded construction

            Segment division: 25-30-35-40-45-50-75-100-150-200-200-270-400-400 mm
            VA steel: 0.8 mm
            Aluminum: 2.0 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine RAS 68.35


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23100 · Folding Machine

          RAS - 68.35 - - M.Nr. 155/3 -

          Technical details
          working width 2040 mm︱plate thickness 3,5 mm︱distance between columns 2100 mm︱sheet width 2040 mm︱output 3,7 kw︱weight of the machine ca. 2,3 t︱
            working width 2040 mm
            plate thickness 3,5 mm
            distance between columns 2100 mm
            sheet width 2040 mm
            output 3,7 kw
            weight of the machine ca. 2,3 t


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine KAPEMA KFS 20/20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08028 · Folding Machine

          KAPEMA - KFS 20/20 - - Fabrikneu / new -

          Technical details
          sheet width 2020 mm︱plate thickness 2 mm︱daylight upper clamping 122 mm︱bending angle max. 135 °︱range L-W-H 2,56 x 0,6 x 1,26 m︱weight of the machine ca. 1020 kg︱
          Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Warranty = 12 months for single-layer operation. Warranty = 12 months for single-shift operation, this only covers spare parts the defective parts must be returned. The working time costs for The replacement is not covered, nor are the downtimes Machine. Machine dealer with own stock of 1600 m².
            sheet width 2020 mm
            plate thickness 2 mm
            daylight upper clamping 122 mm
            bending angle max. 135 °
            range L-W-H 2,56 x 0,6 x 1,26 m
            weight of the machine ca. 1020 kg
            Description :
            Segmented top rail for bending box profiles, upper beam clamping hand-operated,
            manual bending beam actuation with weight compensation, degreescale, adjustable
            bend stop. Warranty = 12 months for single-shift operation.
            The bending performance refers to 380 N/mm² strength.
            Warranty = 12 months for single-layer operation.
            Warranty = 12 months for single-shift operation, this only covers spare parts
            the defective parts must be returned. The working time costs for
            The replacement is not covered, nor are the downtimes
            Machine. Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine KAPEMA KFS 10/25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08413 · Folding Machine

          KAPEMA - KFS 10/25 - - fabrikneu -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱distance between columns 1045 mm︱daylight opening max. 47 mm︱bending angle max. 135 °︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1,35 x 0,86 x 1,17 m︱
          Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 2,5 mm
            distance between columns 1045 mm
            daylight opening max. 47 mm
            bending angle max. 135 °
            weight of the machine ca. 290 kg
            dimensions of the machine ca. 1,35 x 0,86 x 1,17 m
            Description :
            Sengmentable upper rail, upper clamping foot-operated, manual bending clamping
            operate. The bending performance refers to 380 N/mm² strength.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM Machinery MBM 2000 - 20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08502 · Folding Machine

          HM Machinery - MBM 2000 - 20 - - fabrikneu - Beijer

          Technical details
          sheet width 2020 mm︱plate thickness 2 mm︱control Beijer ︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱upper clamping drive 0,375 kW︱bend clamping drive 1,125 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 3 x 1,1 x 1,75 m︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Light barrier control
          Machine dealer with own stock of 1600 m².
            sheet width 2020 mm
            plate thickness 2 mm
            control Beijer
            daylight upper clamping 100 mm
            Bending angle 0 - 135 °
            upper clamping drive 0,375 kW
            bend clamping drive 1,125 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 3 x 1,1 x 1,75 m
            Oil filling exklusive
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •