,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Folding Machine

          Machinelist: Folding Machine


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine HBM 1020 x 2,5


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75221 · Folding Machine

          HBM - 1020 x 2,5 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱distance between columns 1050 mm︱daylight opening mm︱ 135 °︱total power requirement Handbetrieben kW︱weight of the machine ca. 0,32 t︱dimensions of the machine ca. 1,4 x 0,6 x 1,3 m︱
          Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.
            sheet width 1020 mm
            plate thickness 2,5 mm
            distance between columns 1050 mm
            135 °
            total power requirement Handbetrieben kW
            weight of the machine ca. 0,32 t
            dimensions of the machine ca. 1,4 x 0,6 x 1,3 m
            Description :
            Segment-bending machine
            Segment widths:
            25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BERNARDO TB 2020


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8355014 · Folding Machine

          BERNARDO - TB 2020 - - -

          Technical details
          sheet width 2020 mm︱plate thickness 2,0 mm︱daylight opening 122 mit Segmente mm︱bending angle max. 0 - 135 °︱work height max. 930 mm︱total power requirement von Hand kW︱weight of the machine ca. 1020 kg︱dimensions of the machine ca. 2,75 x 0,56 x 1,26 m︱
          characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm
            sheet width 2020 mm
            plate thickness 2,0 mm
            daylight opening 122 mit Segmente mm
            bending angle max. 0 - 135 °
            work height max. 930 mm
            total power requirement von Hand kW
            weight of the machine ca. 1020 kg
            dimensions of the machine ca. 2,75 x 0,56 x 1,26 m
            Description :
            characteristics
            - Segmented upper beam for a large number of bending options
            - Universally applicable bending machine for plumbing and repair shops
            - High upper beam for producing high-edged profiles
            - Quick and easy bending process using a bow handle
            - Easy adjustment of the upper beam for efficient work
            - The bending angle is set using a scale
            - Individually removable segments for bending boxes
            - Large opening width for processing large workpieces
            - Robust construction in a modern design

            scope of delivery
            - Segmented upper cheek
            - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine A+B ERBEND UFA 1212


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8355057 · Folding Machine

          A+B ERBEND - UFA 1212 - - -

          Technical details
          sheet width 1250 mm︱plate width at 30 kg/mm 2,0 mm ALU︱plate thickness 1,25 mm ST︱thickness at "Niro-steel" 0,8 mm VA︱daylight opening 100 mm︱bending angle max. 135 °︱height OW 100 mm︱total power requirement manuell ︱weight of the machine ca. 350 kg.︱dimensions of the machine ca. 1715 x 750 x 1400 mm︱
          Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm * Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile
            sheet width 1250 mm
            plate width at 30 kg/mm 2,0 mm ALU
            plate thickness 1,25 mm ST
            thickness at "Niro-steel" 0,8 mm VA
            daylight opening 100 mm
            bending angle max. 135 °
            height OW 100 mm
            total power requirement manuell
            weight of the machine ca. 350 kg.
            dimensions of the machine ca. 1715 x 750 x 1400 mm
            Description :
            Furnishing:
            - Split upper, lower and rear tool
            - Height of the upper tool = 100 mm
            * Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100
            * left + right with horn tool
            - Upper tool with quick change system
            - Quick foot clamp
            - Angle stop - lockable
            - manual back gauge 500 mm
            - mobile


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BERNARDO BM 2020


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8355011 · Folding Machine

          BERNARDO - BM 2020 - - -

          Technical details
          sheet width 2020 mm︱plate thickness 2,0 mm︱daylight opening 124 mm︱bending angle max. 0 - 135 °︱work height max. 930 mm︱total power requirement von Hand kW︱weight of the machine ca. 1.010 kg︱dimensions of the machine ca. 2,75 x 0,56 x 1,26 m︱
          characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever
            sheet width 2020 mm
            plate thickness 2,0 mm
            daylight opening 124 mm
            bending angle max. 0 - 135 °
            work height max. 930 mm
            total power requirement von Hand kW
            weight of the machine ca. 1.010 kg
            dimensions of the machine ca. 2,75 x 0,56 x 1,26 m
            Description :
            characteristics
            - Easy to use swivel bending machine
            - Flat guide for exact movement of the upper beam
            - Manually adjustable bending angle using a scale
            - Robust welded steel construction, designed for heavy use
            - Large opening width for processing tall workpieces
            - Optionally with back gauge for series work
            - Quick and easy bending process using a bow handle
            - Workpiece clamping by means of a large lever


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095-25-2.5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76561 · Folding Machine

          FASTI - 2095-25-2.5 - - -

          Technical details
          sheet width 2540 mm︱plate thickness 2,50 mm︱distance between columns 2600 mm︱daylight opening OW 300 mm︱adjustment UW 115 mm︱pivoting angle 180 Grad︱work height max. 910 mm︱back stop - adjustable bis 690 mm︱voltage 400 V︱total power requirement 3.8 kW︱weight 2250 kg︱range L-W-H 3640 x 1750 x 1600 mm︱
          ** maintained condition (!!) Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back * Adjustment range up to max. ~ 690 mm - User manual (PDF)
            sheet width 2540 mm
            plate thickness 2,50 mm
            distance between columns 2600 mm
            daylight opening OW 300 mm
            adjustment UW 115 mm
            pivoting angle 180 Grad
            work height max. 910 mm
            back stop - adjustable bis 690 mm
            voltage 400 V
            total power requirement 3.8 kW
            weight 2250 kg
            range L-W-H 3640 x 1750 x 1600 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - robust electro-motive folding machine
            - Bending angle adjustment via electric potentiometer
            * infinitely adjustable
            * with digital value display
            - manual % automatic mode selectable
            - Electrical adjustment of the travel paths of the upper beam
            - manual lower beam adjustment up to 115 mm
            - 1x set of bending tools (installed / used condition)
            - freely movable double foot switch
            - manual material back gauge, adjustable at the back
            * Adjustment range up to max. ~ 690 mm
            - User manual (PDF)




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM III / 1000 x 8 mm


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76531 · Folding Machine

          HERA - UM III / 1000 x 8 mm - - - ELGO TYP 86

          Technical details
          sheet width 1050 mm︱plate thickness 8,00 mm︱distance between columns 1250 mm︱angle adjustable from - to 0 - 180 Grad︱upper clamping bar adjustment 350 mm︱traversing speed OW 4,4 mm/sek︱Control ELGO TYP 86 ︱back stop - adjustable max. 1000 mm︱engine output 5,5 kW︱weight of the machine ca. 3200 kg︱range L-W-H 1900 x 2600 x 1600 mm︱
          ** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments
            sheet width 1050 mm
            plate thickness 8,00 mm
            distance between columns 1250 mm
            angle adjustable from - to 0 - 180 Grad
            upper clamping bar adjustment 350 mm
            traversing speed OW 4,4 mm/sek
            Control ELGO TYP 86
            back stop - adjustable max. 1000 mm
            engine output 5,5 kW
            weight of the machine ca. 3200 kg
            range L-W-H 1900 x 2600 x 1600 mm
            Description :
            ** maintained condition
            ** with a lot of bending tools (!!)
            ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc.

            Furnishing:
            - heavy duty heavy duty folding machine, easy to operate
            - Angle adjustment via electric potentiometer
            - ELGO NC control unit TYPE 86 for electric backgauge
            - NC electric backgauge, with rear sheet metal support surface
            - electric/motorized bending beam
            - Electric/motorized upper beam .. max. 350 mm
            - manual lower beam adjustment .. max. 125 mm
            - manual bending beam adjustment .. max. 125 mm
            - Upper beam with 2x guide spindles
            - 1x free moving foot control
            - 1x mobile tool cabinet for bending tools

            Manufacturer description:
            - electronic lifting height and bending angle adjustment
            - Deactivation of the upper beam lifting height and the clamping pressure via
            timing relay and voltage meter
            - Pushbuttons for controlling the upper and bending beam with manual switching,
            included Upper beam can also be operated via foot switch
            - Adjustability of all cheeks
            - Silent twin motors oil bath worm gear
            - Two-way drive of upper and bending beam via 2 continuous shafts
            - Drive of the upper beam via threaded spindles
            - Drive of the bending beam via internal toothed segments




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095-16-3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76360 · Folding Machine

          FASTI - 2095-16-3 - - -

          Technical details
          sheet width 1620 mm︱plate thickness 3,00 mm︱distance between columns 1700 mm︱daylight opening 350 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱total power requirement 2,2 / 1,5 kW︱weight 1.740 kg︱range L-W-H 2.713 x 1.200 x 1.500 mm︱
          Furnishing: - electric / motorized swivel bending machine - Drive of the upper and bending beam - FASTI PLC control model FM 5 * 5.7 "LCD touch screen display * Numerical input via membrane keyboard * Memory size for 20 programs with 20 steps each - swiveling control panel - manual lower beam adjustment - Double foot switch - Operation manual - 2x front fenders * Replacement bending rails (upper tool)
            sheet width 1620 mm
            plate thickness 3,00 mm
            distance between columns 1700 mm
            daylight opening 350 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            total power requirement 2,2 / 1,5 kW
            weight 1.740 kg
            range L-W-H 2.713 x 1.200 x 1.500 mm
            Description :
            Furnishing:
            - electric / motorized swivel bending machine
            - Drive of the upper and bending beam
            - FASTI PLC control model FM 5
            * 5.7 "LCD touch screen display
            * Numerical input via membrane keyboard
            * Memory size for 20 programs with 20 steps each
            - swiveling control panel
            - manual lower beam adjustment
            - Double foot switch
            - Operation manual
            - 2x front fenders
            * Replacement bending rails (upper tool)


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 204-12-1.75


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355182 · Folding Machine

          FASTI - 204-12-1.75 - - -

          Technical details
          sheet width 1270 mm︱plate thickness 1,75 mm ST︱plate thickness 2,00 mm ALU︱plate thickness 2,50 mm KU︱thickness at "Niro-steel" 0,80 mm︱distance between columns 1300 mm︱daylight opening OW ~ 380 mm︱work height max. 900 mm︱adjustment UW 60,0 mm︱bending angle max. 180 °︱weight ca. 200 kg kg︱range L-W-H 2000 x 520 x 1500 mm︱
          ** good condition (!!) ** Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355182
            sheet width 1270 mm
            plate thickness 1,75 mm ST
            plate thickness 2,00 mm ALU
            plate thickness 2,50 mm KU
            thickness at "Niro-steel" 0,80 mm
            distance between columns 1300 mm
            daylight opening OW ~ 380 mm
            work height max. 900 mm
            adjustment UW 60,0 mm
            bending angle max. 180 °
            weight ca. 200 kg kg
            range L-W-H 2000 x 520 x 1500 mm
            Description :
            ** good condition (!!)
            ** Bending splint e.g. reground

            Furnishing:
            - robust, manual folding machine
            - manual lifting by hand lever (incl. gas pressure damper)
            - manual clamping of the upper beam by means of a handwheel on the side
            - manual lower beam adjustment
            - Bending angle fixed stop, with analogue angle display
            - Upper beam with large opening width
            - Instructions / description

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355182


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM HBM 2500-45S man.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8355046 · Folding Machine

          HM - HBM 2500-45S man. - - -

          Technical details
          sheet width 2540 mm︱plate thickness 4,5 mm ST︱thickness at "Niro-steel" 3,0 mm VA︱bending angle max. 0 - 135 °︱daylight opening 100 mm︱back stop - adjustable 70 - 600 mm︱total power requirement 5,5 kW︱weight of the machine ca. 6275 kg︱dimensions of the machine ca. 3900 x 1700 x 1900 mm︱
          Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek
            sheet width 2540 mm
            plate thickness 4,5 mm ST
            thickness at "Niro-steel" 3,0 mm VA
            bending angle max. 0 - 135 °
            daylight opening 100 mm
            back stop - adjustable 70 - 600 mm
            total power requirement 5,5 kW
            weight of the machine ca. 6275 kg
            dimensions of the machine ca. 3900 x 1700 x 1900 mm
            Description :
            Description .
            - Full hardened structure
            - BEIJER 7 ”touch screen control
            * Software with 40 programs and up to 50 steps
            * 7-inch touchscreen built into the side stand
            - with manual backgauge, adjustable from behind
            - Electronic components are quality components from SCHNEIDER
            - electrical cabinet is integrated in the side stand
            - Adjustment of the hydraulic pressure to the material thickness
            - Adjustment of the material thickness on the bending beam is easy
            with a mm scale
            - Handle for adjusting the material thickness on the upper beam
            is hidden in the side stand
            - Segmented upper cheek


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 212-30-4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76514 · Folding Machine

          FASTI - 212-30-4 - - -

          Technical details
          sheet width 3040 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 6,00 t︱dimensions of the machine ca. m︱
          Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable central lubrication Polished bending rail operation manual Other bending rails and back gauges on request
            sheet width 3040 mm
            plate thickness 4,00 mm
            weight of the machine ca. 6,00 t
            Description :
            Manual and automatic bending process possible
            Bending angle adjustable via potentiometer
            Lifting height of the upper beam variable
            central lubrication
            Polished bending rail
            operation manual

            Other bending rails and back gauges on request


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095-20-2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76532 · Folding Machine

          FASTI - 2095-20-2 - - -

          Technical details
          sheet width 2040 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 1,80 t︱dimensions of the machine ca. m︱
          Manual and automatic bending process possible Bending angle adjustable via potentiometer Stroke height of the upper beam and material thickness can be preselected via DIP switches Polished bending rail
            sheet width 2040 mm
            plate thickness 2,00 mm
            weight of the machine ca. 1,80 t
            Description :
            Manual and automatic bending process possible
            Bending angle adjustable via potentiometer
            Stroke height of the upper beam and material thickness can be preselected via
            DIP switches
            Polished bending rail


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BERNARDO TB 1020


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8355012 · Folding Machine

          BERNARDO - TB 1020 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱daylight opening 48 mm︱bending angle max. 0 - 135 °︱total power requirement von Hand kW︱weight of the machine ca. 285 kg︱dimensions of the machine ca. 1,35 x 0,82 x 1,14 m︱
          Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm
            sheet width 1020 mm
            plate thickness 2,5 mm
            daylight opening 48 mm
            bending angle max. 0 - 135 °
            total power requirement von Hand kW
            weight of the machine ca. 285 kg
            dimensions of the machine ca. 1,35 x 0,82 x 1,14 m
            Description :
            Furnishing:
            - Universally applicable bending machine for plumbing and repair shops
            - Robust construction in a modern design
            - Easy adjustment of the upper beam using a foot pedal
            - Hands are free for the workpiece
            - Manual bending machine for standard bending tasks
            - Segmented upper beam for a large number of bending options
            - Optimal price-performance ratio
            - Quick and easy bending process using a bow handle
            - Non-slip rubber coating on the foot pedal for safe working
            - Easy adjustment of the lower beam to the respective sheet thickness
            - High upper beam for producing high-edged profiles

            scope of delivery
            - Segmented upper cheek
            - manual backgauge
            - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM III / 1000 x 8 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355188 · Folding Machine

          HERA - UM III / 1000 x 8 mm - - - ELGO TYP 86

          Technical details
          sheet width 1050 mm︱plate thickness 8,0 mm︱distance between columns 1250 mm︱angle adjustable from - to 0 - 180 Grad︱upper clamping bar adjustment 350 mm︱traversing speed OW 4,4 mm/sek︱Control ELGO TYP 86 ︱back stop - adjustable max. 1000 mm︱engine output 5,5 kW︱weight of the machine ca. 3200 kg︱range L-W-H 1900 x 2600 x 1600 mm︱
          ** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355188
            sheet width 1050 mm
            plate thickness 8,0 mm
            distance between columns 1250 mm
            angle adjustable from - to 0 - 180 Grad
            upper clamping bar adjustment 350 mm
            traversing speed OW 4,4 mm/sek
            Control ELGO TYP 86
            back stop - adjustable max. 1000 mm
            engine output 5,5 kW
            weight of the machine ca. 3200 kg
            range L-W-H 1900 x 2600 x 1600 mm
            Description :
            ** maintained condition
            ** with a lot of bending tools (!!)
            ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc.

            Furnishing:
            - heavy duty heavy duty folding machine, easy to operate
            - Angle adjustment via electric potentiometer
            - ELGO NC control unit TYPE 86 for electric backgauge
            - NC electric backgauge, with rear sheet metal support surface
            - electric/motorized bending beam
            - Electric/motorized upper beam .. max. 350 mm
            - manual lower beam adjustment .. max. 125 mm
            - manual bending beam adjustment .. max. 125 mm
            - Upper beam with 2x guide spindles
            - 1x free moving foot control
            - 1x mobile tool cabinet for bending tools

            Manufacturer description:
            - electronic lifting height and bending angle adjustment
            - Deactivation of the upper beam lifting height and the clamping pressure via
            timing relay and voltage meter
            - Pushbuttons for controlling the upper and bending beam with manual switching,
            included Upper beam can also be operated via foot switch
            - Adjustability of all cheeks
            - Silent twin motors oil bath worm gear
            - Two-way drive of upper and bending beam via 2 continuous shafts
            - Drive of the upper beam via threaded spindles
            - Drive of the bending beam via internal toothed segments

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355188


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095-20/2


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355160 · Folding Machine

          FASTI - 2095-20/2 - - -

          Technical details
          sheet width 1750 mm︱plate thickness 2,0 mm︱distance between columns 2100 mm︱daylight opening 350 mm︱adjustment 80 mm︱pivoting angle 180 Grad︱total power requirement 3,8 kW︱weight ca. 2200 kg︱
          Furnishing: - robust electric motorized folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment - freely movable double foot switch - with new pointed rail - Operation manual * Machine video: https://www.youtube.com/watch?v=n48Mu4hQrDs https://www.youtube.com/watch?v=pVX99IFvx0g * Machine can only be used with a bending length of 1.750 mm
            sheet width 1750 mm
            plate thickness 2,0 mm
            distance between columns 2100 mm
            daylight opening 350 mm
            adjustment 80 mm
            pivoting angle 180 Grad
            total power requirement 3,8 kW
            weight ca. 2200 kg
            Description :
            Furnishing:
            - robust electric motorized folding machine
            - Bending angle adjustment via electric potentiometer
            * infinitely adjustable
            * with digital value display
            - manual % automatic mode selectable
            - Electrical adjustment of the travel paths of the upper beam
            - manual lower beam adjustment
            - freely movable double foot switch
            - with new pointed rail
            - Operation manual

            * Machine video:
            https://www.youtube.com/watch?v=n48Mu4hQrDs
            https://www.youtube.com/watch?v=pVX99IFvx0g

            * Machine can only be used with a bending length of 1.750 mm


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2055-10-2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76554 · Folding Machine

          FASTI - 2055-10-2 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. m︱
          Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Manual and automatic bending mode possible
            sheet width 1020 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,65 t
            Description :
            Upper beam can be swung out
            Bending angle adjustable via potentiometer
            Lifting height can be preselected via scale
            Manual and automatic bending mode possible


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 205-10-2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76553 · Folding Machine

          FASTI - 205-10-2 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,500 t︱dimensions of the machine ca. m︱
          Upper beam can be swung out Bending rail ground
            sheet width 1020 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,500 t
            Description :
            Upper beam can be swung out
            Bending rail ground


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine RAS 67.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76559 · Folding Machine

          RAS - 67.30 - - -

          Technical details
          sheet width 3200 mm︱plate thickness 2,50 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 3,80 t︱dimensions of the machine ca. m︱
          Segmented upper beam rail Manual and automatic bending mode possible Bending angle adjustment via potentiometer
            sheet width 3200 mm
            plate thickness 2,50 mm
            weight of the machine ca. 3,80 t
            Description :
            Segmented upper beam rail
            Manual and automatic bending mode possible
            Bending angle adjustment via potentiometer


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SILIT UBM II-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4030358 · Folding Machine

          SILIT - UBM II-V - - -

          Technical details
          sheet width 500 mm︱plate thickness 2 mm︱
            sheet width 500 mm
            plate thickness 2 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine RAS 74.30


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5612 · Folding Machine

          RAS - 74.30 - - -

          Technical details
          sheet width 3200 mm︱plate thickness 4 mm︱distance between columns mm︱pressure t︱chamfer lenght mm︱total power requirement kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. m︱
            sheet width 3200 mm
            plate thickness 4 mm
            weight of the machine ca. 6000 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BIEGEMASTER DURA 6.2,00


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-831 · Folding Machine

          BIEGEMASTER - DURA 6.2,00 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufDeutschland6200 mm︱ 2 mm︱ 3 mm︱ 10101130 mm︱ 180 mm︱ 915 mm︱ 6550 mm︱ 7200 mm︱ 1435 mm︱ 1460 mm︱
          hydraulic drive hydraulic sheet thickness adjustment manual adjustable clamping beam pre tensioning 2 hydraulic pressure levels standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions. 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST. OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotary shear with cutting head "S" St/Al 1,5/2,0 mm price on request powered rotary shear with cutting head S2 ST/AL 2,00/2,50 mm price on request powered rotary shear with cutting head S3 ST/AL 3,00/4,00 mm price on request CONTROLBM 10 7-inch display, presetting of up to 10 different angles price on request CONTROLBMS 100 10-inch display control price on request CONTROLBMS 150 10-inch display control with powered back gauge TAZ 1000 with 4 adjustable gauge fingers, area 29 - 1000 mm price on request CONTROLBMS MULTI-TOUCH graphic touch control with powered back gauge TAZ 1000 with 4 adjustable gauge fingers, area 29 - 1000 mm price on request additional fingers for back gaugeTAZ1000 price on request PC-software "BMS Touch" price on request KONICAL BACK GAUGETAZK 1000 seperategauge finger, driven independant from the back gauge controlled by controlBMS Touch, area 10/30 - 890 mm price on request manual back gauge, area 70 - 1000 mm price on request Prices ex works Germany. Transport and commissioningat customers place on request.
            neu
            ca. 12 - 14 Wochen ab Auf
            Deutschland
            6200 mm
            2 mm
            3 mm
            10
            10
            1130 mm
            180 mm
            915 mm
            6550 mm
            7200 mm
            1435 mm
            1460 mm
            Description :
            hydraulic drive
            hydraulic sheet thickness adjustment
            manual adjustable clamping beam pre tensioning
            2 hydraulic pressure levels
            standard control
            additional rail on the bending beam
            2x foot pedal
            removeable material support
            safety equipment accoring to the control rules BG Germany

            Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.

            3 year warranty on stands and tension arms.

            Quality Made in Germany.

            FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

            OPTIONAL EQUIPMENT:

            manual rotary shear
            price on request

            powered rotary shear St/Al 1,25/1,5 mm
            price on request

            powered rotary shear with cutting head "S" St/Al 1,5/2,0 mm
            price on request

            powered rotary shear with cutting head S2 ST/AL 2,00/2,50 mm
            price on request

            powered rotary shear with cutting head S3 ST/AL 3,00/4,00 mm
            price on request

            CONTROLBM 10

            7-inch display, presetting of up to 10 different angles
            price on request

            CONTROLBMS 100

            10-inch display control
            price on request

            CONTROLBMS 150

            10-inch display control with powered back gauge TAZ 1000 with 4 adjustable
            gauge fingers, area 29 - 1000 mm
            price on request

            CONTROLBMS MULTI-TOUCH

            graphic touch control with powered back gauge TAZ 1000 with 4 adjustable gauge
            fingers, area 29 - 1000 mm
            price on request

            additional fingers for back gaugeTAZ1000
            price on request

            PC-software "BMS Touch"
            price on request

            KONICAL BACK GAUGETAZK 1000

            seperategauge finger, driven independant from the back gauge
            controlled by controlBMS Touch, area 10/30 - 890 mm
            price on request

            manual back gauge, area 70 - 1000 mm
            price on request

            Prices ex works Germany.
            Transport and commissioningat customers place on request.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FINTEK V-AMH 3135


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-751 · Folding Machine

          FINTEK - V-AMH 3135 - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan55200 €︱ 1109.52 €︱ 3100 mm︱ 3.5 mm︱ Hydraulisch135 °︱ 4300 mm︱ 1770 mm︱ 1890 mm︱ 4220 kg︱
          NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.100,--
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            55200 €
            1109.52 €
            3100 mm
            3.5 mm
            Hydraulisch
            135 °
            4300 mm
            1770 mm
            1890 mm
            4220 kg
            Description :
            NC control for bending angle
            manual back gauge 600 mm
            hydraulic driven
            vertical movement of upper beam
            segmented blade
            segmented goose neck rail 30°, 110 mm with quick tool change system
            one piece flat bottom bar 30 mm
            according to CE rules

            (sample photo showing model V-AMH 2535 2 axes NC control Schneider)

            OPTION:
            2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.100,--


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FINTEK AMH 3135


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-735 · Folding Machine

          FINTEK - AMH 3135 - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan45900 €︱ 931.77 €︱ 3100 mm︱ 3.5 mm︱ Hydraulisch135 °︱ 4300 mm︱ 1770 mm︱ 1890 mm︱ 4520 kg︱
          hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.500,-- OPTION: 2 axes NC control Schneider7" touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos)
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            45900 €
            931.77 €
            3100 mm
            3.5 mm
            Hydraulisch
            135 °
            4300 mm
            1770 mm
            1890 mm
            4520 kg
            Description :
            hydraulic driven
            NC control for bending angle
            manual back gauge 600 mm
            sharp rail 45° (in one piece)
            front angle beam 75 mm
            mechanical stop adjustment of upper beam
            clamping force adjustment of upper beam
            according to CE rules

            ALTERNATIVELY:

            versionAMH-K,withSECTIONEDsharp rail 45° € 48.500,--

            OPTION:
            2 axes NC control Schneider7" touchscreen incl. motorized back gauge 800 mm € 15.300,--

            (sample photos)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BIEGEMASTER XBEND 8.2,00


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-849 · Folding Machine

          BIEGEMASTER - XBEND 8.2,00 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufDeutschland8200 mm︱ 2 mm︱ 2 mm︱ 1.5 - 2 mm︱ 881000 mm︱
          fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request Fully automatic gripper system with 4 gripper units price on request Prices ex works Germany. Transport and commissioningat customers place on request.
            neu
            ca. 12 - 14 Wochen ab Auf
            Deutschland
            8200 mm
            2 mm
            2 mm
            1.5 - 2 mm
            8
            8
            1000 mm
            Description :
            fully automatic bending in two ways without the need to rotate the sheet
            hydraulic drive
            BMS MULTI-Touch with automatic depth stop
            powered rotary shear
            additional rail on the bending beam
            material support
            2x foot pedal
            safety equipment accoring to the control rules BG Germany

            3 year warranty on stands and tension arms.

            Quality Made in Germany.

            FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.

            OPTIONS:

            Preserving material support made out of synthetics
            price on request

            Hydraulic radius adjustment (air gap adjustment)
            the bending capacitiy of aluminium rises up to 2,5mm
            price on request

            Extended depth 20 - 1.250 mm
            price on request

            Conical depth stop to bend conical profiles and
            narrow/wide bendings for easy intermateing
            price on request

            Fully automatic gripper system with 4 gripper units
            price on request

            Prices ex works Germany.
            Transport and commissioningat customers place on request.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine BIEGEMASTER DURO 5.1,50


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-853 · Folding Machine

          BIEGEMASTER - DURO 5.1,50 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufDeutschland1.5 mm︱ 2 mm︱ 1.5 - 2 mm︱ 661130 mm︱ 180 mm︱ 915 mm︱ 3 kW︱ 5550 mm︱ 6200 mm︱ 1435 mm︱ 1460 mm︱
          standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions. 3 year warranty on stands and tension arms. Quality Made in Germany. Further models on request. SeriesBM from3 up to12 meter lengthe and max. thicknessfrom1 up to1,5 mm steel. OPTIONAL EQUIPMENT: manual rotary shear price on request Powered rotary shear St/Al 1,25/1,5 mm price on request Powered rotary shear with cutting head "S" St/Al 1,5/2,0 mm price on request CONTROLBM 10 7-inch display, presetting of up to 10 different angles price on request CONTROLBMS 100 10-inch graphic control price on request CONTROLBMS 150 10-inch graphic control with powered back gauge TAZ 1000 with 4 adjustable gauge fingers, area 22 - 985 mm price on request CONTROLBMS MULTI-TOUCH Graphic touch control with powered back gauge TAZ 1000 with 4 adjustable gauge fingers, area 22 - 985 mm price on request &nbs Additional fingers for back gaugeTAZ1000 price on request PC-software "BMS Touch" price on request KONICAL BACK GAUGETAZK 1000 Seperategauge finger, driven independant from the back gauge controlled by controlBMS Touch, area 22 - 985 mm price on request &nbs Manual back gauge, area 70 - 1000 mm price on request CLAMPING BEAM ADJUSTMENT Manual clamping beam adjustment price on request Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request Prices ex works Germany. Transport and commissioningat customers place on request.
            neu
            ca. 12 - 14 Wochen ab Auf
            Deutschland
            1.5 mm
            2 mm
            1.5 - 2 mm
            6
            6
            1130 mm
            180 mm
            915 mm
            3 kW
            5550 mm
            6200 mm
            1435 mm
            1460 mm
            Description :
            standard control
            additional rail on the bending beam
            2x foot pedal
            removeable material support
            safety equipment accoring to the control rules BG Germany

            Stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.

            3 year warranty on stands and tension arms.

            Quality Made in Germany.

            Further models on request.
            SeriesBM from3 up to12 meter lengthe and max. thicknessfrom1 up to1,5 mm steel.

            OPTIONAL EQUIPMENT:

            manual rotary shear
            price on request

            Powered rotary shear St/Al 1,25/1,5 mm
            price on request

            Powered rotary shear with cutting head "S" St/Al 1,5/2,0 mm
            price on request

            CONTROLBM 10

            7-inch display, presetting of up to 10 different angles
            price on request

            CONTROLBMS 100

            10-inch graphic control
            price on request

            CONTROLBMS 150

            10-inch graphic control with powered back gauge TAZ 1000 with 4 adjustable
            gauge fingers, area 22 - 985 mm
            price on request

            CONTROLBMS MULTI-TOUCH

            Graphic touch control with powered back gauge TAZ 1000 with 4 adjustable gauge
            fingers, area 22 - 985 mm
            price on request

            &nbs

            Additional fingers for back gaugeTAZ1000
            price on request

            PC-software "BMS Touch"
            price on request

            KONICAL BACK GAUGETAZK 1000

            Seperategauge finger, driven independant from the back gauge
            controlled by controlBMS Touch, area 22 - 985 mm
            price on request

            &nbs

            Manual back gauge, area 70 - 1000 mm
            price on request

            CLAMPING BEAM ADJUSTMENT

            Manual clamping beam adjustment
            price on request

            Hydraulic clamping beam adjustment (incl. manual clamping beam adjustment)
            price on request

            Prices ex works Germany.
            Transport and commissioningat customers place on request.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •