,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308372 · Hydr. pressbrake

          TRUMPF - TrumaBend V50 - - 1998 - DELEM

          Technical details
          pressure 50.0 t︱chamfer lenght 1275 mm︱distance between columns 1040 mm︱column arm 410 mm︱table width 100 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱stroke 215 mm︱tiltable up to +/- 10 mm︱table height 1050 mm︱dayligth 385 mm︱oil volume 80.0 L︱travel -x axis 500 X-Weg mm︱traversing speed 300 R-Weg mm︱compressed air 6.0 bar︱Number of working hours 24.000 h︱control DELEM ︱total power requirement 8.0 KVA︱weight of the machine ca. 4750 kg.︱
          ** Machine with only approx. 24.000 operating hours (!!) ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front, movable material support arms - 1x rear safety device (pivoting door) - 1x safety device on the side - left (pivoting door) - 1x safety device on the side - right (loose door) - TRUMPF original operating instructions * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372
            pressure 50.0 t
            chamfer lenght 1275 mm
            distance between columns 1040 mm
            column arm 410 mm
            table width 100 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            stroke 215 mm
            tiltable up to +/- 10 mm
            table height 1050 mm
            dayligth 385 mm
            oil volume 80.0 L
            travel -x axis 500 X-Weg mm
            traversing speed 300 R-Weg mm
            compressed air 6.0 bar
            Number of working hours 24.000 h
            control DELEM
            total power requirement 8.0 KVA
            weight of the machine ca. 4750 kg.
            Description :
            ** Machine with only approx. 24.000 operating hours (!!)
            ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis

            Furnishing:
            - DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - TRUMPF hydraulic upper tool clamping
            - TRUMPF hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - 2x front, movable material support arms
            - 1x rear safety device (pivoting door)
            - 1x safety device on the side - left (pivoting door)
            - 1x safety device on the side - right (loose door)
            - TRUMPF original operating instructions

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Amada HFBO-2204


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0223349 · Hydr. pressbrake

          Amada - HFBO-2204 - - 1998 -

          Technical details
          pressure 220 t︱chamfer lenght 4050 mm︱distance between columns 3700 mm︱Stroke beam 200 mm︱ 470 mm︱ 350 mm︱Quick speed,inspeed 100 mm/sec︱bendingspeed 0-10 mm/sec︱opening speed 100 mm/sec︱ 600 mm︱R1 and R2 axis controlled by cnc 150 mm︱Z1+Z2 axes controlled by cnc 0-3700 mm︱Number of working hours 28500 h︱Dimensions of machine: ︱length 5500 mm︱width 2300 mm︱height 3000 mm︱weight 16000 kg︱Control ︱total power requirement 15 kW︱
            pressure 220 t
            chamfer lenght 4050 mm
            distance between columns 3700 mm
            Stroke beam 200 mm
            470 mm
            350 mm
            Quick speed,inspeed 100 mm/sec
            bendingspeed 0-10 mm/sec
            opening speed 100 mm/sec
            600 mm
            R1 and R2 axis controlled by cnc 150 mm
            Z1+Z2 axes controlled by cnc 0-3700 mm
            Number of working hours 28500 h
            length 5500 mm
            width 2300 mm
            height 3000 mm
            weight 16000 kg
            total power requirement 15 kW


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT VarioPress 125-50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021147 · Hydr. pressbrake

          EHT - VarioPress 125-50 - - 1998 - Cybelec ModEva

          Technical details
          pressure 125 t︱chamfer lenght 5050 mm︱control Cybelec ModEva ︱Y-rapid travel 100 mm/s︱ 10 mm/s︱ 100 mm/s︱oil volume 250 l︱
            pressure 125 t
            chamfer lenght 5050 mm
            control Cybelec ModEva
            Y-rapid travel 100 mm/s
            10 mm/s
            100 mm/s
            oil volume 250 l


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE BM 200-3100


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6939 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 2000 kN︱chamfer lenght 3100 mm︱distance between columns 3240 mm︱Control Infinitron ︱ram stroke 400 mm︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 160 mm/s︱working feed 1-10 mm/sec︱return speed 160 mm/sec︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide Current Video of the machine: https://youtu.be/kY_r29IbaQs
            pressure 2000 kN
            chamfer lenght 3100 mm
            distance between columns 3240 mm
            Control Infinitron
            ram stroke 400 mm
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 160 mm/s
            working feed 1-10 mm/sec
            return speed 160 mm/sec
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            CNC control Infinitron
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets through separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            Current Video of the machine: https://youtu.be/kY_r29IbaQs


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake KNUTH / DURMA HAP 35200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308265 · Hydr. pressbrake

          KNUTH / DURMA - HAP 35200 - - 1997 - ELGO

          Technical details
          pressure 200 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 200 mm︱ajustment speed 100 mm/sec︱working feed 8,0 mm/sec︱return speed 120 mm/sec︱stroke 190 mm︱table height 900 mm︱dayligth 350 mm︱engine output 15,0 kW︱oil volume 150 ltr.︱Control ELGO ︱weight of the machine ca. 13500 kg.︱range L-W-H 4800 x 1750 x 2800 mm︱
          Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display * digital position display for backgauge (X axis) * digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes * Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/foot control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265
            pressure 200 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 200 mm
            ajustment speed 100 mm/sec
            working feed 8,0 mm/sec
            return speed 120 mm/sec
            stroke 190 mm
            table height 900 mm
            dayligth 350 mm
            engine output 15,0 kW
            oil volume 150 ltr.
            Control ELGO
            weight of the machine ca. 13500 kg.
            range L-W-H 4800 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / electro-hydraulic NC press brake
            - with digital ELGO display
            * digital position display for backgauge (X axis)
            * digital position display for depth adjustment (Y1+Y2 axis)
            - swiveling operation, front left
            - electro-motorized back gauge - X axis
            - electro-motorized adjustment of the immersion depth - Y axes
            * Machine with torsion shaft
            - front support arms
            - continuous adjustment of the pressure force (upper beam)
            - 1x universal matrix block, reversible
            - 1x set of split deer foot upper tool
            - 1x freely movable 2 hand/foot control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake KNUTH / DURMA HAP 35200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96778 · Hydr. pressbrake

          KNUTH / DURMA - HAP 35200 - - 1997 - ELGO

          Technical details
          pressure 200 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 200 mm︱ajustment speed 100 mm/sec︱working feed 8,0 mm/sec︱return speed 120 mm/sec︱stroke 190 mm︱table height 900 mm︱dayligth 350 mm︱engine output 15,0 kW︱oil volume 150 ltr.︱Control ELGO ︱weight of the machine ca. 13500 kg.︱range L-W-H 4800 x 1750 x 2800 mm︱
          Furnishing: - simple / hydraulic NC press brake - with digital ELGO display * Backgauge position indicator * Depth setting position indicator - Swivel control, front left - electric backgauge - X axis - electrical adjustment of the immersion depth - Y axes * Machine with torsion shaft - 1x manually adjustable stop bar - divided upper tools - 1x universal die block, reversible - free-moving 2 hand/foot switch
            pressure 200 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 200 mm
            ajustment speed 100 mm/sec
            working feed 8,0 mm/sec
            return speed 120 mm/sec
            stroke 190 mm
            table height 900 mm
            dayligth 350 mm
            engine output 15,0 kW
            oil volume 150 ltr.
            Control ELGO
            weight of the machine ca. 13500 kg.
            range L-W-H 4800 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / hydraulic NC press brake
            - with digital ELGO display
            * Backgauge position indicator
            * Depth setting position indicator
            - Swivel control, front left
            - electric backgauge - X axis
            - electrical adjustment of the immersion depth - Y axes
            * Machine with torsion shaft
            - 1x manually adjustable stop bar
            - divided upper tools
            - 1x universal die block, reversible
            - free-moving 2 hand/foot switch


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR6 1500 KN x 3100 MM


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308368 · Hydr. pressbrake

          BEYELER - PR6 1500 KN x 3100 MM - - 1997 -

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 405 mm︱table width 150 mm︱ajustment speed 200 mm/sec︱working feed 10.0 mm/sec︱return speed 120 mm/sec︱stroke 215 mm︱dayligth 465 mm︱table height 960 mm︱operating pressure 320 bar︱oil volume 200 l︱voltage 3x 400 V︱total power requirement 15.0 KW︱weight of the machine ca. 9500 kg︱range L-W-H 3958 x 2350 x 2750 mm︱
          ** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 405 mm
            table width 150 mm
            ajustment speed 200 mm/sec
            working feed 10.0 mm/sec
            return speed 120 mm/sec
            stroke 215 mm
            dayligth 465 mm
            table height 960 mm
            operating pressure 320 bar
            oil volume 200 l
            voltage 3x 400 V
            total power requirement 15.0 KW
            weight of the machine ca. 9500 kg
            range L-W-H 3958 x 2350 x 2750 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - BEYELER electro-hydraulic CNC press brake
            - CNC control CYBELEC model DNC 800 HP
            * numerical CNC control unit
            * 2D graphical programming & product display
            * Color screen
            * Tool & program library
            * clear and logically structured screen pages
            * Collision display
            * Swivel operation, front right
            - CNC controlled axes (Y1+Y2-X-R-Z1+Z2)
            - CNC-controlled back gauge adjustment (X-axis)
            - CNC-controlled vertical adjustment of the stop beam (R-axis)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - CNC-controlled underbeam cambering (BEYELER system)
            - manual upper tool clamping
            - manual lower tool clamping
            - BEYELER hydraulic clamping/folding device (lower tool)
            - rear protective device (protective grille)
            - side protection device (protective doors)
            - various folding/bending tools
            - 1x freely movable 2 hand/foot control
            - Operating instructions (PDF) + circuit diagram

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR6 1500 KN x 3100 MM


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96916 · Hydr. pressbrake

          BEYELER - PR6 1500 KN x 3100 MM - - 1997 -

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 405 mm︱table width 150 mm︱ajustment speed 200 mm/sec︱working feed 10.0 mm/sec︱return speed 120 mm/sec︱stroke 215 mm︱dayligth 465 mm︱table height 960 mm︱operating pressure 320 bar︱oil volume 200 l︱voltage 3x 400 V︱total power requirement 15.0 KW︱weight of the machine ca. 9500 kg︱range L-W-H 3958 x 2350 x 2750 mm︱
          ** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 405 mm
            table width 150 mm
            ajustment speed 200 mm/sec
            working feed 10.0 mm/sec
            return speed 120 mm/sec
            stroke 215 mm
            dayligth 465 mm
            table height 960 mm
            operating pressure 320 bar
            oil volume 200 l
            voltage 3x 400 V
            total power requirement 15.0 KW
            weight of the machine ca. 9500 kg
            range L-W-H 3958 x 2350 x 2750 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - BEYELER electro-hydraulic CNC press brake
            - CNC control CYBELEC model DNC 800 HP
            * numerical CNC control unit
            * 2D graphical programming & product display
            * Color screen
            * Tool & program library
            * clear and logically structured screen pages
            * Collision display
            * Swivel operation, front right
            - CNC controlled axes (Y1+Y2-X-R-Z1+Z2)
            - CNC-controlled back gauge adjustment (X-axis)
            - CNC-controlled vertical adjustment of the stop beam (R-axis)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - CNC-controlled underbeam cambering (BEYELER system)
            - manual upper tool clamping
            - manual lower tool clamping
            - BEYELER hydraulic clamping/folding device (lower tool)
            - rear protective device (protective grille)
            - side protection device (protective doors)
            - various folding/bending tools
            - 1x freely movable 2 hand/foot control
            - Operating instructions (PDF) + circuit diagram




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA APX 80.25


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-165 · Hydr. pressbrake

          AMADA - APX 80.25 - - 1997 - operateur

          Technical details
          pressure 80 t︱chamfer lenght 2500 mm︱distance between columns 2050 mm︱Control operateur ︱Number of axles 7 St.︱total power requirement 7.5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3x2.1x2.2 m︱
            pressure 80 t
            chamfer lenght 2500 mm
            distance between columns 2050 mm
            Control operateur
            Number of axles 7 St.
            total power requirement 7.5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3x2.1x2.2 m


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HÄMMERLE BM 200-3100


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7839 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 200 t︱Control Infinitron ︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 2,67 mm/min︱work speed 0,001- 0,01 m/min︱return speed 2,67 mm/min︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets by separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide technical description Slim stand principle with 500 mm free passage. The stands are provided with swivel bearings on which the table is placed. On the one hand, the cylinders are screwed between the side stands and clearly positioned by means of wedges. On the other hand, the cylinders are bolted to the support at the front and rear, resulting in a stabilizing frame construction. The hydraulic tank is screwed between the side stands and contains all the block hydraulics for controlling the individual machine elements such as the tappet drive, tool clamping, die slide device, etc. The movement of the plunger is controlled by electronically controlled proportional valves, a gray scale being provided on each side of the plunger for precise measurement of the position. Both the parallel position and the exact lower action point position are controlled by the CNC control via the valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at the bottom dead centre. The frame suspension (frame on suspension) is compensated on both sides by mounting the gray scales on separate supports that are attached directly to the table. The ram is rapidly advanced by ancestors under the influence of its own weight, whereby the press cylinders are supplied with oil by means of large suction valves. After the switchover point from the forward speed to the working speed has been reached, the plungers are supplied with oil from the main pump via the proportional valves. The steel press cylinders are double-acting, with the piston rods being connected to the ram by cambered supports and elastic intermediate links. A safety control independent of the electronics registers the parallel position of the ram and switches the machine off immediately if, due to a fault in the electronics of the ram, it does not remain in the parallel position. Otherwise, the dangerous functions of the hydraulics are automatically checked and secured in accordance with the latest accident prevention regulations. The electrical cabinet on the right side of the machine essentially contains the power section, the computer section and the safety section. The connections from the electrical box to the mechanical part are made using plug connections. The machine and accessories comply with the currently applicable provisions of Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 / EEC. The machine price includes the required side and rear protective grilles and two-hand operation with a safety stop.
            pressure 200 t
            Control Infinitron
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 2,67 mm/min
            work speed 0,001- 0,01 m/min
            return speed 2,67 mm/min
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets by separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            technical description

            Slim stand principle with 500 mm free passage. The stands are provided with
            swivel bearings on which the table is placed. On the one hand, the cylinders
            are screwed between the side stands and clearly positioned by means of wedges.
            On the other hand, the cylinders are bolted to the support at the front and
            rear, resulting in a stabilizing frame construction.

            The hydraulic tank is screwed between the side stands and contains all the
            block hydraulics for controlling the individual machine elements such as the
            tappet drive, tool clamping, die slide device, etc.

            The movement of the plunger is controlled by electronically controlled
            proportional valves, a gray scale being provided on each side of the plunger
            for precise measurement of the position. Both the parallel position and the
            exact lower action point position are controlled by the CNC control via the
            valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at
            the bottom dead centre. The frame suspension (frame on suspension) is
            compensated on both sides by mounting the gray scales on separate supports that
            are attached directly to the table.

            The ram is rapidly advanced by ancestors under the influence of its own weight,
            whereby the press cylinders are supplied with oil by means of large suction
            valves. After the switchover point from the forward speed to the working speed
            has been reached, the plungers are supplied with oil from the main pump via the
            proportional valves.

            The steel press cylinders are double-acting, with the piston rods being
            connected to the ram by cambered supports and elastic intermediate links. A
            safety control independent of the electronics registers the parallel position
            of the ram and switches the machine off immediately if, due to a fault in the
            electronics of the ram, it does not remain in the parallel position. Otherwise,
            the dangerous functions of the hydraulics are automatically checked and secured
            in accordance with the latest accident prevention regulations.

            The electrical cabinet on the right side of the machine essentially contains
            the power section, the computer section and the safety section. The connections
            from the electrical box to the mechanical part are made using plug connections.

            The machine and accessories comply with the currently applicable provisions of
            Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 /
            EEC.

            The machine price includes the required side and rear protective grilles and
            two-hand operation with a safety stop.



        • MWB GmbH & CO. KG
        • Parkstraße 12
        • 09456 Annaberg-Buchholz
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Unbekannt/Unknown BAYKAL APH 3106x120


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1732 · Hydr. pressbrake

          Unbekannt/Unknown - BAYKAL APH 3106x120 - - 1997 -

          Technical details
          gebraucht19978250Türkei22500 €︱ 1120 to︱ 3100 mm︱ 180 mm︱ 2550 mm︱ 240 mm︱ 320 mm︱ 170 mm︱ 11 kW︱ 3500 mm︱ 1450 mm︱ 2270 mm︱ 7200 kg︱ 600 mm︱ 53 mm/s︱
          With 2-hand and foot control panel Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front Motorised press depth adjustment via +/- button with digital display 2 backgauge fingers 2 table support arms Foot & two-hand control Side & rear safety fairing New Multi V Die 3100 x 90 x 90 mm 7V Openings 9/13/16/20/30/35/56mm cranked upper tool 3100x110x25mm 86°, new grinded User Manual German + EG Declaration of conformity COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1997
            8250
            Türkei
            22500 €
            1
            120 to
            3100 mm
            180 mm
            2550 mm
            240 mm
            320 mm
            170 mm
            11 kW
            3500 mm
            1450 mm
            2270 mm
            7200 kg
            600 mm
            53 mm/s
            Description :
            With 2-hand and foot control panel
            Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front
            Motorised press depth adjustment via +/- button with digital display
            2 backgauge fingers
            2 table support arms
            Foot & two-hand control
            Side & rear safety fairing
            New Multi V Die 3100 x 90 x 90 mm
            7V Openings 9/13/16/20/30/35/56mm
            cranked upper tool 3100x110x25mm 86°, new grinded
            User Manual German + EG Declaration of conformity

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 36.200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96907 · Hydr. pressbrake

          HACO - PPM 36.200 - - 1996 - konv.

          Technical details
          pressure 200 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱stroke of upper beam 200 mm︱throat 300 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱ 265 bar︱Control konv. ︱work height max. 965 mm︱total power requirement 15,0 kW︱weight 12700 kg︱range L-W-H 3860 x 1750 x 2800 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual
            pressure 200 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            stroke of upper beam 200 mm
            throat 300 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            265 bar
            Control konv.
            work height max. 965 mm
            total power requirement 15,0 kW
            weight 12700 kg
            range L-W-H 3860 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * Torsion shaft for parallelism
            - electric back stop (X axis)
            * with handwheel for fine adjustment
            * on ball screws
            * 2x manually adjustable stop fingers
            - manual (jog mode) and automatic cycle selector switch
            - split deer foot upper tools
            - 2x universal V-die block, reversible
            - freely movable 2-hand/foot control
            - Operation manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake DARLEY EHP 50-20/15


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96714 · Hydr. pressbrake

          DARLEY - EHP 50-20/15 - - 1996 -

          Technical details
          pressure 050 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 320 mm︱stroke 120 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 75,0 mm/sec︱column arm 250 mm︱work height max. 900 mm︱table width 100 mm︱connected load 7,2 kW︱oil volume 90 ltr.︱weight 2600 kg︱range L-W-H 2250 x 1100 x 2050 mm︱
          Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch
            pressure 050 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 320 mm
            stroke 120 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 75,0 mm/sec
            column arm 250 mm
            work height max. 900 mm
            table width 100 mm
            connected load 7,2 kW
            oil volume 90 ltr.
            weight 2600 kg
            range L-W-H 2250 x 1100 x 2050 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA 24e
            - swiveling control panel
            - electrical backgauge (X axis)
            - 2x manually adjustable stop fingers
            * lateral + vertical adjustment (R + Z axis)
            - 2x front support arms
            - SICK light barrier in front
            - 2 hand / foot switch


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake OMAG PSB 5026


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12337 · Hydr. pressbrake

          OMAG - PSB 5026 - - 1996 - Sintesi

          Technical details
          pressure 50 t︱chamfer lenght 3075 mm︱distance between columns 2600 mm︱Control Sintesi ︱throat 250 mm︱upper clamping stroke 140 mm︱dayligth 295 mm︱pre-running speed 90 mm/sec︱press speed 1-7 mm/sec︱return speed 62 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 4,4 t︱dimensions of the machine ca. 3,7 x 2,2 x 2,2 m︱Electric 380 Volt ︱Foot switch ︱2-hand-control panel ︱Upper tool divided 3000 mm︱Upper tool spitz/gekröpft ︱Matrize 1 V / geteilt, 3000 mm︱Matrize 4 V 3000 mm︱
          Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. There are many split upper tools in the shape of a doe's foot and a pointed design, as well as a heavily cranked upper tool in 1000 mm. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
            pressure 50 t
            chamfer lenght 3075 mm
            distance between columns 2600 mm
            Control Sintesi
            throat 250 mm
            upper clamping stroke 140 mm
            dayligth 295 mm
            pre-running speed 90 mm/sec
            press speed 1-7 mm/sec
            return speed 62 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 4,4 t
            dimensions of the machine ca. 3,7 x 2,2 x 2,2 m
            Upper tool divided 3000 mm
            Upper tool spitz/gekröpft
            Matrize 1 V / geteilt, 3000 mm
            Matrize 4 V 3000 mm
            Description :
            Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2
            immersion depth and x back gauge. The control calculates and controls the
            immersion depth by specifying the bending angle and the position of the back
            gauge. There are many split upper tools in the shape of a doe's foot and a
            pointed design, as well as a heavily cranked upper tool in 1000 mm.
            The machine was used in a well-kept small business to produce special stainless
            steel parts for kitchens, laboratories and clinics and was only operated by the
            owner.
            The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake DARLEY EHP 50-20/15


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308216 · Hydr. pressbrake

          DARLEY - EHP 50-20/15 - - 1996 -

          Technical details
          pressure 50,0 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 320 mm︱stroke 120 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 75,0 mm/sec︱column arm 250 mm︱work height max. 900 mm︱table width 100 mm︱connected load 7,2 kW︱oil volume 90 ltr.︱weight 2600 kg︱range L-W-H 2250 x 1100 x 2050 mm︱
          Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch
            pressure 50,0 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 320 mm
            stroke 120 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 75,0 mm/sec
            column arm 250 mm
            work height max. 900 mm
            table width 100 mm
            connected load 7,2 kW
            oil volume 90 ltr.
            weight 2600 kg
            range L-W-H 2250 x 1100 x 2050 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA 24e
            - swiveling control panel
            - electrical backgauge (X axis)
            - 2x manually adjustable stop fingers
            * lateral + vertical adjustment (R + Z axis)
            - 2x front support arms
            - SICK light barrier in front
            - 2 hand / foot switch


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 36.200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308361 · Hydr. pressbrake

          HACO - PPM 36.200 - - 1996 - konv.

          Technical details
          pressure 200 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱stroke of upper beam 200 mm︱throat 300 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱ 265 bar︱Control konv. ︱work height max. 965 mm︱total power requirement 15,0 kW︱weight 12700 kg︱range L-W-H 3860 x 1750 x 2800 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361
            pressure 200 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            stroke of upper beam 200 mm
            throat 300 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            265 bar
            Control konv.
            work height max. 965 mm
            total power requirement 15,0 kW
            weight 12700 kg
            range L-W-H 3860 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * Torsion shaft for parallelism
            - electric back stop (X axis)
            * with handwheel for fine adjustment
            * on ball screws
            * 2x manually adjustable stop fingers
            - manual (jog mode) and automatic cycle selector switch
            - split deer foot upper tools
            - 2x universal V-die block, reversible
            - freely movable 2-hand/foot control
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 85


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-695168 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 85 - - 1996 - TRUMPF Delem DA 65T

          Technical details
          pressure 85 t︱chamfer lenght 2000 mm︱distance between columns 1750 mm︱Control TRUMPF Delem DA 65T ︱total power requirement 10 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. m︱
          T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 __________________________________________________________________________________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm Stroke, bending speed 1 - 10 mm/sec Stroke, rapid traverse 200/135 mm/sec Adjustment range of back gauge, approx. 800 x 300 (vertical) mm Total electrical load, approx. 10 kW - 400 V - 50 Hz Weight, approx. 7,5 to Accessories / Special Features: * The stroke movement of the upper toolslide is driven by two hydraulic pistons and proportional valves and controlled by two electronic measurement scales. Therefore it can be achieved a tilting line of the upper tool of approx. 10 mm * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis like: Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on the pendant control and screen with grafics. * CNC-Controlled Cambering by separate control unit inside the table. * Hydraulic driven fast clamping of upper and lower tools * On backside of machine mounted a gauge stop slide controlled in 2 axis ( =R a.X-Axis) in vertical stroke and forward and backwards, three sheet metal stopfingers. * Two-handed release on mobile control stand, and/or foot switch. * Pressure Manometer for the Hydraulic System and oil filter * In front of machine there are 2 lengthwise adjustable sheet metal supports. * Various Bending tools smaller size, * Swivable Safety covers on side and backside doors with plexi-glass shields, etc. Condition : Good to very good – stable design. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            pressure 85 t
            chamfer lenght 2000 mm
            distance between columns 1750 mm
            Control TRUMPF Delem DA 65T
            total power requirement 10 kW
            weight of the machine ca. 7,5 t
            Description :
            T R U M P F (Germany)
            CNC - Controlled Hydraulic Press Brake
            Model TRUMABEND V 85, year 1996 Serial No. 88 31 52
            __________________________________________________________________________________

            Pressure, max. 85 to
            Working width, max. 2.050 mm
            Working width between columns 1,750 mm

            Side daylight of each column 410 mm
            Max. distance
            between upper and lower tool holder w/o tools 350 mm
            Adjustment of upper tool holder approx. 300 mm
            Table width approx 105 mm
            Height of Table from floor approx. 1.050 mm

            Max. stroke 215 mm
            Stroke, bending speed 1 - 10 mm/sec
            Stroke, rapid traverse 200/135 mm/sec
            Adjustment range of back gauge, approx. 800 x 300 (vertical) mm

            Total electrical load, approx. 10 kW - 400 V - 50 Hz
            Weight, approx. 7,5 to

            Accessories / Special Features:
            * The stroke movement of the upper toolslide is driven by two hydraulic
            pistons and proportional valves and controlled by two electronic
            measurement scales.
            Therefore it can be achieved a tilting line of the upper tool of
            approx. 10 mm
            * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis
            like:
            Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on
            the pendant control and screen with grafics.
            * CNC-Controlled Cambering by separate control unit inside the table.
            * Hydraulic driven fast clamping of upper and lower tools
            * On backside of machine mounted a gauge stop slide controlled in 2 axis
            ( =R a.X-Axis) in vertical stroke and forward and backwards, three
            sheet metal stopfingers.
            * Two-handed release on mobile control stand, and/or foot switch.
            * Pressure Manometer for the Hydraulic System and oil filter
            * In front of machine there are 2 lengthwise adjustable sheet metal
            supports.
            * Various Bending tools smaller size,
            * Swivable Safety covers on side and backside doors with plexi-glass
            shields, etc.

            Condition : Good to very good – stable design.
            Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF V 130


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100509 · Hydr. pressbrake

          TRUMPF - V 130 - - 1996 -

          Technical details
          Power max. 1300 kN︱Working width max. 3060 mm︱Width betw. Frames 2690 mm︱Plate thickness max. 8 mm︱Throat C-Frame 410 mm︱Max tool high 385 mm︱Stroke maximum 215 mm︱Working speed 11 mm/s︱Electric Power 18,5 kW︱Way back gauge X 600 mm︱Back strokes speed 135 mm/s︱working hours total 21695 Std.︱
          The machine is in good condition. CNC Backgauge 3 Axes (X+Z+R), 2 pcs fast adjusting tables, Hydraulic clamping device for upper tools (type modufix), Hydraulic clamping for Bottom tools, CNC crowning, mnauals.
            Power max. 1300 kN
            Working width max. 3060 mm
            Width betw. Frames 2690 mm
            Plate thickness max. 8 mm
            Throat C-Frame 410 mm
            Max tool high 385 mm
            Stroke maximum 215 mm
            Working speed 11 mm/s
            Electric Power 18,5 kW
            Way back gauge X 600 mm
            Back strokes speed 135 mm/s
            working hours total 21695 Std.
            Description :
            The machine is in good condition.


            CNC Backgauge 3 Axes (X+Z+R), 2 pcs fast adjusting tables, Hydraulic clamping device for upper tools (type modufix), Hydraulic clamping for Bottom tools, CNC crowning, mnauals.


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHPS 15-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020954 · Hydr. pressbrake

          EHT - EHPS 15-40 - - 1995/2018 - CYBELEC ModEva Pac

          Technical details
          pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱Control CYBELEC ModEva Pac ︱throat 350 mm︱distance between table / ram 430 mm︱table width 250 mm︱stroke 250 mm︱total power requirement 18,5 kW︱weight of the machine ca. 16500 kg︱dimensions of the machine ca. 4400x2100x3200 mm︱
            pressure 150 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            Control CYBELEC ModEva Pac
            throat 350 mm
            distance between table / ram 430 mm
            table width 250 mm
            stroke 250 mm
            total power requirement 18,5 kW
            weight of the machine ca. 16500 kg
            dimensions of the machine ca. 4400x2100x3200 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LVD PPI 55 /20 MNC 95


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002825 · Hydr. pressbrake

          LVD - PPI 55 /20 MNC 95 - - 1995 - MNC95c4

          Technical details
          pressure 55 t︱chamfer lenght 2000 mm︱distance between columns 1640 mm︱throat 250 mm︱control MNC95c4 ︱stroke 125 mm︱daylight opening 325 mm︱closing speed - rapid travel 100 mm/sec︱working feed 14,7 mm/sec︱return speed 92 mm/sec︱hydraulic motor 7,5 kW︱total power requirement 10,5 kW︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 2,5 x 2,0 x 2,5 m︱
          • 2 hand-operation with foot switch, • safety device, Model: SICK, type V 4000, • controlled R-axis, • man. quick clamping of the upper tool,
            pressure 55 t
            chamfer lenght 2000 mm
            distance between columns 1640 mm
            throat 250 mm
            control MNC95c4
            stroke 125 mm
            daylight opening 325 mm
            closing speed - rapid travel 100 mm/sec
            working feed 14,7 mm/sec
            return speed 92 mm/sec
            hydraulic motor 7,5 kW
            total power requirement 10,5 kW
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 2,5 x 2,0 x 2,5 m
            Description :
            • 2 hand-operation with foot switch,
            • safety device, Model: SICK, type V 4000,
            • controlled R-axis,
            • man. quick clamping of the upper tool,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 130 X


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96932 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 130 X - - 1995 -

          Technical details
          pressure 130 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱column arm 410 mm︱stroke 365 mm︱dayligth 535 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱table width 120 mm︱table height 1050 mm︱tiltable up to +/- 10 mm︱Number of working hours 26.937 h︱compressed air 5.0 - 7.0 bar︱oil volume 250 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 16.0 KVA︱weight of the machine ca. 12950 kg︱range L-W-H 3640 x 2210 x 2885 mm︱
          ** maintained condition (!!) - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - CNC WILA electro-motor table crowning - TRUMPF electro-hydraulic upper tool clamping - TRUMPF electro-hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front support arms - incl. "Sliding System" - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original instruction manual
            pressure 130 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            column arm 410 mm
            stroke 365 mm
            dayligth 535 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            table width 120 mm
            table height 1050 mm
            tiltable up to +/- 10 mm
            Number of working hours 26.937 h
            compressed air 5.0 - 7.0 bar
            oil volume 250 l
            operating pressure 340 bar
            voltage 400 V
            total power requirement 16.0 KVA
            weight of the machine ca. 12950 kg
            range L-W-H 3640 x 2210 x 2885 mm
            Description :
            ** maintained condition (!!)

            - - - - - - - - - - - - - -
            HIGH-SPEED electro-hydraulic press brake with:
            increased installation height
            increased cylinder stroke
            - - - - - - - - - - - - - -

            Furnishing:
            - CNC electro-hydraulic die bending press
            - including DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - CNC WILA electro-motor table crowning
            - TRUMPF electro-hydraulic upper tool clamping
            - TRUMPF electro-hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - 2x front support arms - incl. "Sliding System"
            - Rear safety device (sliding door)
            - Safety device on the side (pivoting door)
            - original instruction manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 130 X


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308380 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 130 X - - 1995 -

          Technical details
          pressure 130 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱column arm 410 mm︱stroke 365 mm︱dayligth 535 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱table width 120 mm︱table height 1050 mm︱tiltable up to +/- 10 mm︱Number of working hours 26.937 h︱compressed air 5.0 - 7.0 bar︱oil volume 250 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 16.0 KVA︱weight of the machine ca. 12950 kg︱range L-W-H 3640 x 2210 x 2885 mm︱
          ** maintained condition (!!) - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - CNC WILA electro-motor table crowning - TRUMPF electro-hydraulic upper tool clamping - TRUMPF electro-hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front support arms - incl. "Sliding System" - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380 * Machinevideo : https://www.youtube.com/watch?v=bgqj2HCDid4
            pressure 130 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            column arm 410 mm
            stroke 365 mm
            dayligth 535 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            table width 120 mm
            table height 1050 mm
            tiltable up to +/- 10 mm
            Number of working hours 26.937 h
            compressed air 5.0 - 7.0 bar
            oil volume 250 l
            operating pressure 340 bar
            voltage 400 V
            total power requirement 16.0 KVA
            weight of the machine ca. 12950 kg
            range L-W-H 3640 x 2210 x 2885 mm
            Description :
            ** maintained condition (!!)

            - - - - - - - - - - - - - -
            HIGH-SPEED electro-hydraulic press brake with:
            increased installation height
            increased cylinder stroke
            - - - - - - - - - - - - - -

            Furnishing:
            - CNC electro-hydraulic die bending press
            - including DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - CNC WILA electro-motor table crowning
            - TRUMPF electro-hydraulic upper tool clamping
            - TRUMPF electro-hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - 2x front support arms - incl. "Sliding System"
            - Rear safety device (sliding door)
            - Safety device on the side (pivoting door)
            - original instruction manual

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380

            * Machinevideo :
            https://www.youtube.com/watch?v=bgqj2HCDid4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HATASTAR PB 100-2050


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021072 · Hydr. pressbrake

          HATASTAR - PB 100-2050 - - 1995 - CYBELEC DNC 880S

          Technical details
          pressure 100 t︱chamfer lenght 2050 mm︱control CYBELEC DNC 880S ︱dimensions 2650x2600x2700 mm︱weight 8000 kg︱
            pressure 100 t
            chamfer lenght 2050 mm
            control CYBELEC DNC 880S
            dimensions 2650x2600x2700 mm
            weight 8000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EcoPress 125


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021134 · Hydr. pressbrake

          EHT - EcoPress 125 - - 1995 -

          Technical details
          pressure 125 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 300 mm︱stroke of ram 240 mm︱quantity of oil 200 l︱total power requirement 11 kW︱weight of the machine ca. 14000 kg︱
            pressure 125 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 300 mm
            stroke of ram 240 mm
            quantity of oil 200 l
            total power requirement 11 kW
            weight of the machine ca. 14000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact