,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA GBP PLUS 30220


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020952 · Hydr. pressbrake

          FARINA - GBP PLUS 30220 - - Neu - CYBELEC VisiTouch 19 2D

          Technical details
          pressure 220 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱Control CYBELEC VisiTouch 19 2D ︱dayligth 525 mm︱stroke 275 mm︱feed down 150 mm/sec︱feed bending 0-10 mm/sec︱feed up 120 mm/sec︱total power requirement 18,5 kW︱weight of the machine ca. 15.600 kg︱dimensions of the machine ca. 4250x2000x3150 mm︱
            pressure 220 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            Control CYBELEC VisiTouch 19 2D
            dayligth 525 mm
            stroke 275 mm
            feed down 150 mm/sec
            feed bending 0-10 mm/sec
            feed up 120 mm/sec
            total power requirement 18,5 kW
            weight of the machine ca. 15.600 kg
            dimensions of the machine ca. 4250x2000x3150 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 30200


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021135 · Hydr. pressbrake

          FARINA - BSA PLUS 30200 - - NEU -

          Technical details
          pressure 200 t︱chamfer lenght 3000 mm︱distance between columns mm︱throat mm︱distance between table / ram mm︱stroke mm︱feed down mm/sec︱feed bending mm/sec︱feed up mm/sec︱engine output kW︱weight of the machine ca. kg︱
            pressure 200 t
            chamfer lenght 3000 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021056 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU -

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA BSA PLUS 40320


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021137 · Hydr. pressbrake

          FARINA - BSA PLUS 40320 - - NEU -

          Technical details
          pressure 320 t︱chamfer lenght 4000 mm︱stroke 350 mm︱arm length 400 mm︱
            pressure 320 t
            chamfer lenght 4000 mm
            stroke 350 mm
            arm length 400 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FARINA PFO 130/30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021102 · Hydr. pressbrake

          FARINA - PFO 130/30 - - NEU - CYBELEC VisiTouch

          Technical details
          pressure 130 t︱chamfer lenght 3150 mm︱distance between columns 2600 mm︱engine output 15 kW︱control CYBELEC VisiTouch ︱weight of the machine ca. 10900 kg︱dimensions of the machine ca. 3990x1750x2900 mm︱
          Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed ??changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model "AS" with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl. Tools: sectioned, hardened and ground: Upper tool: Type: Wila BIU-021 Lower tool: Type: 4-V - Hydraulic compensation - "Platinum Package" consisting of: Active dynamic crowning Compensation of the stator suspension Sheet thickness measuring system diagnostic module - Active dynamic crowning device: Constant angle over the entire length Complete management of the crowning fully automatic Constant angle on the sides and in the middle No speed reduction The system works automatically and is almost invisible, no additional equipment required - Compensation of the stator suspension Bending sheet metal plates of different lengths without that The program parameters need to be changed. Bending of notched or perforated sheets without The program parameters need to be changed. Possibility of parts to work with reduced dimensions then test the workpiece with the actual dimensions without having to change the program parameters. No speed reduction during processing. The system works automatically and is almost invisible, no accessories required. - Sheet thickness measuring system Increased accuracy Fully automatic system Less waste Control of the material No speed reduction The system works automatically and is almost invisible, no accessories required - Soft start system "Start / Stop" to save energy - Control cabinet cooling - Hydraulic parts from Hoerbiger and Denison - Electrical parts from Rockwell Automation, Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting through a LED strip - Machine lighting behind the machine with 2 LED strips - Footswitch - Laser safety system "DSP AP MSC" with height-adjustable Special arms. The system allows a speed change of only 2 mm from sheet metal and optimizes cycle times and maximum safety. - 2 front support arms (500mm): laterally movable and manually height adjustable by handwheel. - side and rear safety devices - Service key - Operating instructions and maintenance manual - Machine without oil - Machine according to standard 2006/42 / CE and CE certificate
            pressure 130 t
            chamfer lenght 3150 mm
            distance between columns 2600 mm
            engine output 15 kW
            control CYBELEC VisiTouch
            weight of the machine ca. 10900 kg
            dimensions of the machine ca. 3990x1750x2900 mm
            Description :
            Domestic equipments:
            - DELEM DA66T - 2D CNC control with LCD color display for control
            of 7 axes:
            Y1 = 1 ° cylinder
            Y2 = 2 ° cylinder
            X1 = horizontal movement of the backgauge
            X3 = horizontal movement of the stop finger / inclination
            R = vertical movement of the backgauge
            Z1-Z2 = lateral movement of the stop fingers

            - Top Dead Center
            - Speed ??changeover point
            - bending end
            - Deactivation point of the safety light barrier
            - Retreat stop
            - CNC controlled proportional pressure control
            - conical bending
            - USB port
            - DFC stator suspension compensation
            - Motorized back gauge model "AS" with 5 controlled axes
            - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke
            - R-axis: 250 mm stroke
            - Hydraulic upper tool clamping make Wila, type: "Premium" NSCL-II-HC
            - Manual Unterwerkzeugklemmung, make Wila
            - Incl. Tools: sectioned, hardened and ground:
            Upper tool: Type: Wila BIU-021
            Lower tool: Type: 4-V
            - Hydraulic compensation

            - "Platinum Package" consisting of:
            Active dynamic crowning
            Compensation of the stator suspension
            Sheet thickness measuring system
            diagnostic module

            - Active dynamic crowning device:
            Constant angle over the entire length
            Complete management of the crowning
            fully automatic
            Constant angle on the sides and in the middle
            No speed reduction
            The system works automatically and is almost invisible,
            no additional equipment required

            - Compensation of the stator suspension
            Bending sheet metal plates of different lengths without that
            The program parameters need to be changed.
            Bending of notched or perforated sheets without
            The program parameters need to be changed.
            Possibility of parts to work with reduced dimensions
            then test the workpiece with the actual dimensions
            without having to change the program parameters.
            No speed reduction during processing.
            The system works automatically and is almost invisible, no accessories
            required.


            - Sheet thickness measuring system
            Increased accuracy
            Fully automatic system
            Less waste
            Control of the material
            No speed reduction
            The system works automatically and is almost invisible, no accessories
            required

            - Soft start system "Start / Stop" to save energy
            - Control cabinet cooling
            - Hydraulic parts from Hoerbiger and Denison
            - Electrical parts from Rockwell Automation, Allen Bradley, Schneider,
            Siemens, Delem
            - Cabinet lighting through a LED strip
            - Machine lighting behind the machine with 2 LED strips
            - Footswitch
            - Laser safety system "DSP AP MSC" with height-adjustable
            Special arms. The system allows a speed change of only 2 mm
            from sheet metal and optimizes cycle times and maximum safety.
            - 2 front support arms (500mm): laterally movable and manually
            height adjustable by handwheel.
            - side and rear safety devices
            - Service key
            - Operating instructions and maintenance manual
            - Machine without oil
            - Machine according to standard 2006/42 / CE and CE certificate


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.