,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Decoilers for Coils

          Machinelist: Decoilers for Coils


          Decoilers for Coils

          used Sheet metal working / shaeres / bending Decoilers for Coils UNGERER HSSH y 16/490


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7696 · Decoilers for Coils

          UNGERER - HSSH y 16/490 - - überh./rev. 2006 -

          Technical details
          sheet width - max. 1600/1780 mm︱coil weight 5,00 t︱coil internal dia. 508 mm︱height of the drum over the floor ca. 1150 mm︱total power requirement kW︱weight of the machine ca. 5,50 t︱dimensions of the machine ca. m︱
          Equipment: - Substructure frame - hydraulic - Hydraulic spread - Pressure arm hydraulic - Pressing roller driven - Brake / disc brake - hydraulic Hydraulics not available Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm Substructure frame: approx. 1,760 x 960 x 600 mm
            sheet width - max. 1600/1780 mm
            coil weight 5,00 t
            coil internal dia. 508 mm
            height of the drum over the floo. 1150 mm
            weight of the machine ca. 5,50 t
            Description :
            Equipment:
            - Substructure frame - hydraulic
            - Hydraulic spread
            - Pressure arm hydraulic
            - Pressing roller driven
            - Brake / disc brake - hydraulic

            Hydraulics not available

            Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm
            Substructure frame: approx. 1,760 x 960 x 600 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils HS-AUTOMATION MS 21 OL


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7812 · Decoilers for Coils

          HS-AUTOMATION - MS 21 OL - - 2011 -

          Technical details
          sheet width - max. 0350 mm︱coil weight 1,00 t︱coil internal dia. 5570 - 750 mm︱coil outside - diam. ca. 1200 mm︱Pay-off Speed 30 m/min︱expansion hydraulisch ︱Drive regelbar ︱total power requirement kW︱weight of the machine ca. 0,650 t︱dimensions of the machine ca. m︱
            sheet width - max. 0350 mm
            coil weight 1,00 t
            coil internal dia. 5570 - 750 mm
            coil outside - diam. ca. 1200 mm
            Pay-off Speed 30 m/min
            expansion hydraulisch
            Drive regelbar
            weight of the machine ca. 0,650 t
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils MILLUTENSIL SLM 1500.1


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7811 · Decoilers for Coils

          MILLUTENSIL - SLM 1500.1 - - 2009 -

          Technical details
          sheet width - max. 0400 mm︱coil weight 1,50 t︱coil internal dia. 470 - 630 mm︱coil outside - diam. ca. 1600 mm︱0 12 U/min︱total power requirement kW︱weight of the machine ca. 0,850 t︱dimensions of the machine ca. 1,70 x 1,40 x 1,70 m︱
          frequency converter
            sheet width - max. 0400 mm
            coil weight 1,50 t
            coil internal dia. 470 - 630 mm
            coil outside - diam. ca. 1600 mm
            0 12 U/min
            weight of the machine ca. 0,850 t
            dimensions of the machine ca. 1,70 x 1,40 x 1,70 m
            Description :
            frequency converter
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils HS-AUTOMATION RCA 181


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7805 · Decoilers for Coils

          HS-AUTOMATION - RCA 181 - - 2006 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 2,00 t︱coil internal dia. 350 - 550 mm︱coil outside - diam. ca. 1400 mm︱expansion hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Hydraulic spreading - 6 pieces of clip-on arms for lateral band limitation - Frequency-controlled drive - Loop control via ultrasonic transmitter - Free-standing control cabinet - Pneumatic pressure roller from above, can be moved laterally - Engine brake - Swivel hand control panel - Reel can be moved hydraulically - Loading chair can be swiveled 90°
            sheet width - max. 0500 mm
            coil weight 2,00 t
            coil internal dia. 350 - 550 mm
            coil outside - diam. ca. 1400 mm
            expansion hydraulisch
            Description :
            - Hydraulic spreading
            - 6 pieces of clip-on arms for lateral band limitation
            - Frequency-controlled drive
            - Loop control via ultrasonic transmitter
            - Free-standing control cabinet
            - Pneumatic pressure roller from above, can be moved laterally
            - Engine brake
            - Swivel hand control panel
            - Reel can be moved hydraulically
            - Loading chair can be swiveled 90°
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils CAMU SC 515/M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7815 · Decoilers for Coils

          CAMU - SC 515/M - - 2005 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 1,50 t︱coil internal dia. 370 - 630 mm︱coil external diameter 1450 mm︱total power requirement 1,1 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width - max. 0500 mm
            coil weight 1,50 t
            coil internal dia. 370 - 630 mm
            coil external diameter 1450 mm
            total power requirement 1,1 kW
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils KEMMERICH V150S


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7787 · Decoilers for Coils

          KEMMERICH - V150S - - 1999 -

          Technical details
          sheet width - max. 0100 mm︱coil weight 0,150 t︱coil internal dia. 320 - 520 mm︱coil outside - diam. ca. 1200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame
            sheet width - max. 0100 mm
            coil weight 0,150 t
            coil internal dia. 320 - 520 mm
            coil outside - diam. ca. 1200 mm
            Description :
            - manually adjustable brake
            - Rear handguard
            - Restriction ring in front
            - Movable on frame
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils ARKU AH 3000-400-MSG-4Q


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7781 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          sheet width - max. 0600 mm︱coil weight 3,00 t︱coil internal dia. 465 - 530 mm︱total power requirement kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2,72 x 1,70 x 2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            sheet width - max. 0600 mm
            coil weight 3,00 t
            coil internal dia. 465 - 530 mm
            weight of the machine ca. 2,45 t
            dimensions of the machine ca. 2,72 x 1,70 x 2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left
            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable
            hydraulic unit not available
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils DIMECO 2330 / M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7814 · Decoilers for Coils

          DIMECO - 2330 / M - - 1991 -

          Technical details
          sheet width - max. 0250 mm︱coil weight 0,500 t︱coil internal dia. 250 - 550 mm︱coil outside - diam. ca. 1150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width - max. 0250 mm
            coil weight 0,500 t
            coil internal dia. 250 - 550 mm
            coil outside - diam. ca. 1150 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils SCHLEICHER HE-100-500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7780 · Decoilers for Coils

          SCHLEICHER - HE-100-500 - - 1988 -

          Technical details
          sheet width - max. 0500 mm︱coil weight 3,00 t︱coil internal dia. 370 - 510 mm︱total power requirement kW︱weight of the machine ca. 0,54 t︱dimensions of the machine ca. 1,25 x 1,08 x 1,67 m︱
          material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9
            sheet width - max. 0500 mm
            coil weight 3,00 t
            coil internal dia. 370 - 510 mm
            weight of the machine ca. 0,54 t
            dimensions of the machine ca. 1,25 x 1,08 x 1,67 m
            Description :
            material width (previously) 300 mm
            mandrel length 500 (510) mm
            mandrel – Ø (expandig range) 370 – 410 mm
            dto. with segments 470 – 510 mm
            height floor - middle of mandrel 1.050 mm
            height upper edge decoiler construction - middle of mandrel 860 mm
            accessories:
            construction 3-segment-construction
            expanding process mechanically
            no. – limiting arms 5
            dimension – limiting arms (l x h) 400 x 60 mm
            brake unit mechanically (via star grip)
            no. – segments 9
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils SOPREM SOP 200/20M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7786 · Decoilers for Coils

          SOPREM - SOP 200/20M - - 1987 -

          Technical details
          sheet width - max. 0250 mm︱coil weight 0,200 t︱coil internal dia. 240 - 560 mm︱coil outside dia. 1300 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame
            sheet width - max. 0250 mm
            coil weight 0,200 t
            coil internal dia. 240 - 560 mm
            coil outside dia. 1300 mm
            Description :
            - Drive with electric motor
            - Rear handguard
            - Restriction ring in front
            - Control for automatic/manual, right/left and switch-on delay
            - Loop control via ground contact
            - Note the reel on the mobile frame
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils HEILBRONN HAEMH 5000/1600


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7764 · Decoilers for Coils

          HEILBRONN - HAEMH 5000/1600 - - 1986 -

          Technical details
          sheet width - max. 1600 mm︱coil weight 5,00 t︱coil internal dia. 508-610 mm︱coil outside - diam. ca. 1400 mm︱working direction left - right ja/yes ︱range of expansion ca. 460 - 530 mm︱total power requirement kW︱weight of the machine ca. 8,10 t︱dimensions of the machine ca. 8,00 x 2,50 x 2,20 m︱
          Equipment: - Driven paper winder (floor mounting) Core width max. 1,600 mm Inside of Case - Through. 76mm - Substructure frame with integrated toothed rack (reel shift) - Coil loading chair – integrated in the coiler substructure above the floor - decoiler Drive (auxiliary drive) power 1.1 kW Spread hydraulically Pressure arm hydraulic Driven pressure roller (motorized via chain) Drive power 0.75 kW Motorized reel shift (via rack) Disc brake - pneumatic Valve stand attached to reel construction Coil stop disc 1,400 mm diam. - Hydraulics - Electrics not available
            sheet width - max. 1600 mm
            coil weight 5,00 t
            coil internal dia. 508-610 mm
            coil outside - diam. ca. 1400 mm
            working direction left - right ja/yes
            range of expansion ca. 460 - 530 mm
            weight of the machine ca. 8,10 t
            dimensions of the machine ca. 8,00 x 2,50 x 2,20 m
            Description :
            Equipment:
            - Driven paper winder (floor mounting)
            Core width max. 1,600 mm
            Inside of Case - Through. 76mm
            - Substructure frame with integrated toothed rack (reel shift)
            - Coil loading chair – integrated in the coiler substructure above the floor
            - decoiler
            Drive (auxiliary drive) power 1.1 kW
            Spread hydraulically
            Pressure arm hydraulic
            Driven pressure roller (motorized via chain)
            Drive power 0.75 kW
            Motorized reel shift (via rack)
            Disc brake - pneumatic
            Valve stand attached to reel construction
            Coil stop disc 1,400 mm diam.
            - Hydraulics
            - Electrics not available
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils SOPREM SOP 200/20M/K


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7785 · Decoilers for Coils

          SOPREM - SOP 200/20M/K - - 1985 -

          Technical details
          sheet width - max. 0250 mm︱coil weight 0,200 t︱coil internal dia. 240 - 560 mm︱coil outside - diam. ca. 1000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame
            sheet width - max. 0250 mm
            coil weight 0,200 t
            coil internal dia. 240 - 560 mm
            coil outside - diam. ca. 1000 mm
            Description :
            - Drive with electric motor
            - Rear handguard
            - Restriction ring in front
            - Control for automatic/manual, right/left and switch-on delay
            - Loop control via ground contact
            - Note the reel on the mobile frame
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils TILGERT


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7796 · Decoilers for Coils

          TILGERT - - - 1976 -

          Technical details
          sheet width - max. 1770/1850 mm︱coil weight 20,00 t︱coil internal dia. 508 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 5,00 x 1,55 x 1,55 m︱
          dimension – machine corpus (without mandrel) l x w 2.500 x 1.450 mm working direction – previously right - left working speed – previously 100 / 200 m/min. accessories: expanding process hydraulically gear box manufacturer KESTERMANN, power 80 kW / speed N1 = 370 2 x counter plate (movement – base plate) 1 x cylinder tube – new (expanding) circular lubrication kind of brake system disc brake brake disc available brake caliper 1 x available / 1 x not available motor not available (power previously 65 kW) base plate not available press arm not available hydraulic unit not available
            sheet width - max. 1770/1850 mm
            coil weight 20,00 t
            coil internal dia. 508 mm
            dimensions of the machine ca. 5,00 x 1,55 x 1,55 m
            Description :
            dimension – machine corpus (without mandrel) l x w 2.500 x 1.450 mm
            working direction – previously right - left
            working speed – previously 100 / 200 m/min.
            accessories:
            expanding process hydraulically
            gear box manufacturer KESTERMANN, power 80 kW / speed N1 = 370
            2 x counter plate (movement – base plate)
            1 x cylinder tube – new (expanding)
            circular lubrication
            kind of brake system disc brake
            brake disc available
            brake caliper 1 x available / 1 x not available
            motor not available (power previously 65 kW)
            base plate not available
            press arm not available
            hydraulic unit not available
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils DIMECO 2380/FFPSHO


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7809 · Decoilers for Coils

          DIMECO - 2380/FFPSHO - - 04/00 -

          Technical details
          sheet width - max. 750-900 mm︱coil weight 3,50 - 4,00 t︱coil internal dia. 400 - 500 mm︱coil outside - diam. ca. 1500 mm︱total power requirement kW︱weight of the machine ca. 1,90 t︱dimensions of the machine ca. 1,50 x 1,90 x 2,30 m︱
            sheet width - max. 750-900 mm
            coil weight 3,50 - 4,00 t
            coil internal dia. 400 - 500 mm
            coil outside - diam. ca. 1500 mm
            weight of the machine ca. 1,90 t
            dimensions of the machine ca. 1,50 x 1,90 x 2,30 m
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils HILLE


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7794 · Decoilers for Coils

          HILLE - - - -

          Technical details
          sheet width - max. 0500 mm︱coil weight 2,00 t︱coil internal dia. 355 - 420 mm︱total power requirement kW︱weight of the machine ca. 0,93 t︱dimensions of the machine ca. 2,00 x 0,95 x 1,75 m︱
          Construction 4-jaw design Spread hydraulically Spreading process tested (functioning properly) Manual disc brake (via star grip) Hydraulics attached to the reel construction Manual valve attached (via pipe) to machine construction U-profile attached under machine construction (for mobile use of the reel) Floor height - center reel head 900 mm
            sheet width - max. 0500 mm
            coil weight 2,00 t
            coil internal dia. 355 - 420 mm
            weight of the machine ca. 0,93 t
            dimensions of the machine ca. 2,00 x 0,95 x 1,75 m
            Description :
            Construction 4-jaw design
            Spread hydraulically
            Spreading process tested (functioning properly)
            Manual disc brake (via star grip)
            Hydraulics attached to the reel construction
            Manual valve attached (via pipe) to machine construction
            U-profile attached under machine construction
            (for mobile use of the reel)
            Floor height - center reel head 900 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils EIGL


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7813 · Decoilers for Coils

          EIGL - - - -

          Technical details
          sheet width - max. 0350 mm︱coil weight 2,00 t︱coil internal dia. 460 - 560 mm︱coil outside - diam. ca. 1500 mm︱total power requirement kW︱weight of the machine ca. 0,640 t︱dimensions of the machine ca. m︱
          without drive Disc brake
            sheet width - max. 0350 mm
            coil weight 2,00 t
            coil internal dia. 460 - 560 mm
            coil outside - diam. ca. 1500 mm
            weight of the machine ca. 0,640 t
            Description :
            without drive
            Disc brake
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Frech GmbH

          Contacter le commerçant



            Frech GmbH
           Werderstr. 82
            74889 - Berlin
            Allemagne
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profil de commerçant

          Fondée à 1945 par Karl Frech et dirigée par Mme Nicole Frech en tant que responsable de la génération 3rd, la société peut se prévaloir d'une longue tradition 60 dans la ville de Sinsheim, près de Heidelberg, dans la région de Baden en Allemagne. 

          Sinsheim est situé sur l’autoroute A6, à une heure de route des autoroutes Francfort / Main et Stuttgart. La société FRECH GmbH est spécialisée dans le traitement des équipements usagés (dépoussiéreurs, recoilers, niveleuses à rouleaux, lignes de bobines, lignes de profilage, lignes de refendage, lignes de coupe, laminoirs à froid et rectifieuses à cylindres). 

          En outre, l'équipe FRECH intervient comme agent dans les domaines suivants de machines d'occasion: wagons à bobines, plieuses, rectifieuses, presses plieuses, presses, ferrailleurs et cisailles. Contactez-nous s'il vous plaît !!! - Nous vous aiderons également dans d'autres domaines. Sur une superficie d'environ 1000 mètres carrés de halls et de surfaces de vente, nous présentons une gamme de machines d'occasion en constante évolution, en état de fonctionnement correct et, pour la plupart, propres à la démonstration. 

          Pourquoi des machines d'occasion? 

          Les machines d’occasion sont la plupart du temps immédiatement disponibles et sont prêtes à fonctionner. Frech est votre première adresse lorsque vous souhaitez réduire vos coûts en capital et augmenter l'efficacité économique de vos machines. 

          L'achat et la vente de machines d'occasion est une question de confiance - Frech est votre meilleur contact

          NOS CONTACTS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·