Cut-to-length-lines
Machinelist: Cut-to-length-lines
Cut-to-length-lines
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-056810 · Cut-to-length-lines
VIGANO/RIVA - - - 2000/2001 -
Technical details
sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-19439 · Cut-to-length-lines
HITACHI - - - 1993 -
Technical details
Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
Datasheet
Request / Contact
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-056410 · Cut-to-length-lines
WILHELMSBURGER - - - 1975 -
Technical details
length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-M825 · Cut-to-length-lines
Hydro Meca - 90L4C108H - - -
Technical details
Pipe cutting machine
Notching Machine
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-06464 · Notching Machine
UNBEKANNT - A 5 - - Unbekannt -
Technical details
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-2390001 · Notching Machine
METALLKRAFT - AKM 200-6 VP - - NEU -
Technical details
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-45 · Notching Machine
SIMASV - AF 226 - - 2021 -
Technical details
DEMO MACHINE hydraulic drive automatic adjustment of the blade gap 1 set of blades for mild steel 2 gauges angle adjustable protection cover, acrylic glas foot pedal waste chute load hook machine feet according to CErules
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-8390110 · Notching Machine
BERNARDO - MRA-Pro - - 2020 -
Technical details
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-S353 · Notching Machine
HUVEMA - BL-3 - - 2020 -
Technical details
Brand Huvema Type BL-3 Year of make 2020 Machine weight 29 kg Capacity 3 T Blade length 125 x 125 mm Plate thickness 1,5 mm
- Valk Machines BV
- Kadijk 6
- 8531XD Lemmer
- Niederlande
-
+31 514562904
-
sales@valkmachines.com
www.valkmachines.com
#2079-35 · Notching Machine
MEULEMAN - KC10 - - 2018 -
Technical details
Capacity: Ø41,9 x 2,7 R21 x 8 mm Featured with: - Footpedal - User manual (NL) Airpresse machine
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-S384 · Notching Machine
Baykal - HKA 200x6 - - 2018 -
Technical details
Brand Baykal Machine no S384 Type HKA 200x6 Year of make 2018 Machine dimensions (L×W×H) 920 x 1.150 x 1.300 mm Blade length 200 mm Plate thickness 6 mm Hydraulic Variable angle Machine weight 1.200 kg
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-003086 · Notching Machine
HUVEMA - AKM 1.6P - - 2013 -
Technical details
• manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-186 · Notching Machine
TOOLPOWER - TOOLPOWER MFN 1030 - - 2012 -
Technical details
Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-413 · Notching Machine
TOOLPOWER - TOOLPOWER RA 1 - - 2012 -
Technical details
operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-2241 · Notching Machine
TOOLPOWER - TOOLPOWER MFN 1516 - - 2011 -
Technical details
manual Notching machine
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397093 · Notching Machine
BOSCHERT - K30-120 MINI S - - 2003 -
Technical details
** Machine like NEW (!!) Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397093
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-S343 · Notching Machine
Durma - VHKM 2006 - - 2002 -
Technical details
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397086 · Notching Machine
COMACA - VAR 250/6 - - 2001 -
Technical details
Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397090 · Notching Machine
BOSCHERT - K30-120 MINI S - - 2001 -
Technical details
Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - 2x staking stops * with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397090
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397087 · Notching Machine
INDUMASCH - VA 200/8 - - 2001 -
Technical details
** from a maintenance workshop ** New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397087
Datasheet
Request / Contact
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-92287 · Notching Machine
EUROMAC - 220/4 - - 1999 -
Technical details
Foot switch angle adjustment 30°-140° automatic cutting gap adjustment
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397094 · Notching Machine
EUROMAC - MULTI 220/6 R - - 1998 -
Technical details
** current new price approx. 25.000 euros ** Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations * 1x notching, 1x bending station * including bending tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: * 6.0 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-S370 · Notching Machine
APOLLO - TV204 - - 1998 -
Technical details
Brand Apollo Type TV204 Year of make 1998 Blade length 200 mm Plate thickness 4 mm Hydraulic Variable angle Machine size (lxwxh) 1.100 x 950 x 1.270 mm
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9397083 · Notching Machine
BOSCHERT - K30-120 MINI S - - 1996 -
Technical details
Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.
Datasheet
Request / Contact
TOP Manufacturer:
VIGANO/RIVA - HYDRO MECA - WILHELMSBURGER - HITACHI -