,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Double Decoilers for Coils

          Machinelist: Double Decoilers for Coils


          Decoiler - Double

          used Sheet metal working / shaeres / bending Decoiler - Double AMT AHDR 500/1600


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7807 · Decoiler - Double

          AMT - AHDR 500/1600 - - 2018 -

          Technical details
          sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil inside-diam. ca. 1600 mm︱0 1 - 10 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one !
            sheet width 0150 mm
            coil weight 2 x 0,50 t
            coil internal dia. 250 - 650 mm
            coil inside-diam. ca. 1600 mm
            0 1 - 10 U/min
            Description :
            - Spreading manually via hand crank
            - Separate control panel
            - Drive infinitely variable via SEW motors and converters
            - Rear contact washer, front limiting ring
            - Loop control via ultrasonic transmitter loops
            Side guide including loop tensioning switch
            - Reel can be moved transversely +/- 50mm via ratchet
            - 4 protective bars for securing the coil

            Machine was never in production - it is like a new one !


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoiler - Double AMT AHDR 500/1600


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7806 · Decoiler - Double

          AMT - AHDR 500/1600 - - 2018 -

          Technical details
          sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil outside - diam. ca. 1600 mm︱0 1-10 U/min︱engine output 2 x 0,75 kW, insgesamt 2 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time!!
            sheet width 0150 mm
            coil weight 2 x 0,50 t
            coil internal dia. 250 - 650 mm
            coil outside - diam. ca. 1600 mm
            0 1-10 U/min
            engine output 2 x 0,75 kW, insgesamt 2 kW
            Description :
            - Spreading manually via hand crank
            - Separate control panel
            - Drive infinitely variable via SEW motors and converters
            - Rear contact washer, front limiting ring
            - Loop control via ultrasonic transmitter loops
            Side guide including loop tensioning switch
            - Reel can be moved transversely +/- 50mm via ratchet
            - 4 protective bars for securing the coil
            Machine was only in operation for a short time!!


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoiler - Double CAMU SCD 615 M


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7808 · Decoiler - Double

          CAMU - SCD 615 M - - 2008 -

          Technical details
          sheet width 0600 mm︱coil weight 2 x 1,50 t︱coil internal dia. 370 - 630 mm︱coil outside - diam. ca. 1560 mm︱0 12 U/min︱power capacity 1,1 kW︱total power requirement kW︱weight of the machine ca. 1,55 t︱dimensions of the machine ca. 2,60 x 1,20 x 1,90 m︱
          double decoiler with motor, manual expansion, coil loop control
            sheet width 0600 mm
            coil weight 2 x 1,50 t
            coil internal dia. 370 - 630 mm
            coil outside - diam. ca. 1560 mm
            0 12 U/min
            power capacity 1,1 kW
            weight of the machine ca. 1,55 t
            dimensions of the machine ca. 2,60 x 1,20 x 1,90 m
            Description :
            double decoiler
            with motor, manual expansion, coil loop control



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoiler - Double CORNO ITALY AFDC 150


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7816 · Decoiler - Double

          CORNO ITALY - AFDC 150 - - 1993 -

          Technical details
          sheet width 0350 mm︱coil weight 2 x 1,50 t︱coil internal dia. 360 - 530 mm︱coil outside - diam. ca. 1600 mm︱pinch roll pneumatisch ︱total power requirement kW︱weight of the machine ca. 1,00 t︱dimensions of the machine ca. 2,00 x 2,00 x 2,20 m︱
          - without drive - mech. Spreading with hydraulic. Hand pump
            sheet width 0350 mm
            coil weight 2 x 1,50 t
            coil internal dia. 360 - 530 mm
            coil outside - diam. ca. 1600 mm
            pinch roll pneumatisch
            weight of the machine ca. 1,00 t
            dimensions of the machine ca. 2,00 x 2,00 x 2,20 m
            Description :
            - without drive
            - mech. Spreading with hydraulic. Hand pump


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Double Decoilers for Coils

          used Sheet metal working / shaeres / bending Double Decoilers for Coils ASSERVIMENTI SMD 15 S


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0326 · Double Decoilers for Coils

          ASSERVIMENTI - SMD 15 S - - 2001 -

          Technical details
          Double mandrela coil weight each side 1 t︱Material width 45 mm︱Coil exterior diameter 2.050 mm︱Expansion range 350 - 640 mm︱Weight of machine approx. 2,2 t︱
            Double mandrela coil weight each. 1 t
            Material width 45 mm
            Coil exterior diameter 2.050 mm
            Expansion range 350 - 640 mm
            Weight of machine approx. 2,2 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 5950 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 5950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2606


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011154 · Plate Shear - Hydraulic

          BAYKAL - HGL 2606 - - NEU -

          Technical details
          sheet width 2560 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 15 Stück︱engine output 11 kW︱machine weight ab. 4670 kg︱dimensions 3350 x 2800 x 1550 mm︱
            sheet width 2560 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 15 Stück
            engine output 11 kW
            machine weight ab. 4670 kg
            dimensions 3350 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2106 - - NEU -

          Technical details
          sheet width 2060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 13 Stück︱engine output 11 kW︱machine weight ab. 3850 kg︱dimensions 2850 x 2800 x 1550 mm︱
            sheet width 2060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 13 Stück
            engine output 11 kW
            machine weight ab. 3850 kg
            dimensions 2850 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 4106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011156 · Plate Shear - Hydraulic

          BAYKAL - HGL 4106 - - NEU -

          Technical details
          sheet width 4060 mm︱plate thickness 6 mm︱System pressure 200 kg/cm2︱down holder 23 Stück︱engine output 11 kW︱machine weight ab. 9400 kg︱dimensions 4940 x 2750 x 1560 mm︱
            sheet width 4060 mm
            plate thickness 6 mm
            System pressure 200 kg/cm2
            down holder 23 Stück
            engine output 11 kW
            machine weight ab. 9400 kg
            dimensions 4940 x 2750 x 1560 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 4110


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011184 · Plate Shear - Hydraulic

          BAYKAL - MGH 4110 - - NEU -

          Technical details
          sheet width 4100 mm︱plate thickness 10 mm︱cutting angle 2 °︱ 10 ︱rear stop 5 - 1000 mm︱hydr. holding down 23 ︱oil volume 170 l︱total power requirement 22 kW︱machine weight ab. 13.000 kg︱dimensions 4900 x 2800 x 1900 mm︱
            sheet width 4100 mm
            plate thickness 10 mm
            cutting angle 2 °
            10
            rear stop 5 - 1000 mm
            hydr. holding down 23
            oil volume 170 l
            total power requirement 22 kW
            machine weight ab. 13.000 kg
            dimensions 4900 x 2800 x 1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS 85.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94147 · Plate Shear - Hydraulic

          RAS - 85.30 - - ca. 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement 7,50 kW︱weight of the machine ca. 4,20 t︱dimensions of the machine ca. m︱
          - CNC controlled back gauge 10 – 1000mm - central cutting gap adjustment - Pneumatic sheet metal support - Angle stop 2500 mm - 3 support arms
            sheet width 3100 mm
            plate thickness 4,00 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,20 t
            Description :
            - CNC controlled back gauge 10 – 1000mm
            - central cutting gap adjustment
            - Pneumatic sheet metal support
            - Angle stop 2500 mm
            - 3 support arms


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30-16 RA


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01256 · Plate Shear - Hydraulic

          STEINER - HTS 30-16 RA - - ca. 1978 -

          Technical details
          sheet width 3050 mm︱plate thickness 16 mm︱distance between columns - mm︱back stop - adjustable 1000 mm︱total power requirement kW︱weight of the machine ca. 15 t︱
          Acc.: electr. back gauge with DRO, table extensions
            sheet width 3050 mm
            plate thickness 16 mm
            distance between columns - mm
            back stop - adjustable 1000 mm
            weight of the machine ca. 15 t
            Description :
            Acc.: electr. back gauge with DRO, table extensions


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          ASSERVIMENTI -