,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Plate Bending Machine - 3 Rolls

          Machinelist: Plate Bending Machine - 3 Rolls


          Rolls bending machine - 3 Rolls

          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM 130-15/4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040091 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM 130-15/4,0 - - Neu -

          Technical details
          sheet width 1550 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱roll length 1550 mm︱min. dia. 190 mm︱roll diam. toproll 130 mm︱weight 1265 kg︱dimensions 2670x1110x1050 mm︱
          Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller
            sheet width 1550 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            roll length 1550 mm
            min. dia. 190 mm
            roll diam. toproll 130 mm
            weight 1265 kg
            dimensions 2670x1110x1050 mm
            Description :
            Domestic equipments:
            - Central rollers via electric motor, planetary reduction gear and
            Gear drive driven
            - Swivel top roller
            - Main engine with brake device
            - Conical bending device
            - Mobile controller and foot pedal
            - CE mark / Declaration of Conformity

            Additional equipment:
            - induction hardened rolls
            - motorized rear roller adjustment
            - Digital display for back roller


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls ROLLMAK SM 90-12/3.0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040359 · Rolls bending machine - 3 Rolls

          ROLLMAK - SM 90-12/3.0 - - NEU -

          Technical details
          sheet width 1256 mm︱plate thickness 3 mm︱pre-bending 2,5 ︱frequency 50 Hz︱volt 400 V︱0 90 mm︱min. dia. 130 mm︱total power requirement 1.1 kW︱weight of the machine ca. 545 kg︱dimensions of the machine ca. 1.1 m︱
            sheet width 1256 mm
            plate thickness 3 mm
            pre-bending 2,5
            frequency 50 Hz
            volt 400 V
            0 90 mm
            min. dia. 130 mm
            total power requirement 1.1 kW
            weight of the machine ca. 545 kg
            dimensions of the machine ca. 1.1 m


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls HBM HBM 1x610 mm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040336 · Rolls bending machine - 3 Rolls

          HBM - HBM 1x610 mm - - NEU -

          Technical details
          plate width 610 mm︱plate thickness 1 mm︱roll diameter 38 mm︱
            plate width 610 mm
            plate thickness 1 mm
            roll diameter 38 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND ASM 140-20/4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040078 · Rolls bending machine - 3 Rolls

          AK-BEND - ASM 140-20/4,0 - - Neu -

          Technical details
          sheet width 2050 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱min. dia. 210 mm︱roll diameter 140 mm︱weight of the machine ca. 1530 kg︱dimensions of the machine ca. 3220x1200x900 mm︱
          Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls
            sheet width 2050 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            min. dia. 210 mm
            roll diameter 140 mm
            weight of the machine ca. 1530 kg
            dimensions of the machine ca. 3220x1200x900 mm
            Description :
            Standard features:
            - Central rollers via electric motor, planetary reduction gear and
            Gear drive driven
            - Swivel top roller
            - Main engine with brake device
            - Conical bending device
            - Mobile controller and foot pedal
            - CE mark / Declaration of Conformity

            Additional equipment:
            - motorized rear roller adjustment
            - Digital display for back roller
            - induction hardened rolls


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls ROLLMAK SM 90-10/3.3


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040358 · Rolls bending machine - 3 Rolls

          ROLLMAK - SM 90-10/3.3 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 3,3 mm︱pre-bending 3 ︱volt 400 V︱frequency 50 Hz︱0 90 mm︱min. dia. 130 mm︱total power requirement 1,1 kW︱weight of the machine ca. 490 kg︱dimensions of the machine ca. 1650x1200x700 m︱
            sheet width 1050 mm
            plate thickness 3,3 mm
            pre-bending 3
            volt 400 V
            frequency 50 Hz
            0 90 mm
            min. dia. 130 mm
            total power requirement 1,1 kW
            weight of the machine ca. 490 kg
            dimensions of the machine ca. 1650x1200x700 m


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls AK-BEND A 56-10/1,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040209 · Rolls bending machine - 3 Rolls

          AK-BEND - A 56-10/1,0 - - NEU -

          Technical details
          sheet width 1050 mm︱plate thickness 1 mm︱roll diameter 56 mm︱dimensions of the machine ca. 1600 x 700 x 1050 mm︱
          Domestic equipments: - Upper roller can be swung out manually
            sheet width 1050 mm
            plate thickness 1 mm
            roll diameter 56 mm
            dimensions of the machine ca. 1600 x 700 x 1050 mm
            Description :
            Domestic equipments:
            - Upper roller can be swung out manually


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls HUVEMA HU 1550x90 RS


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-W251 · Rolls bending machine - 3 Rolls

          HUVEMA - HU 1550x90 RS - - 2021 -

          Technical details
          Roll length 1550 mm︱Max. plate thickness 2 mm︱Diam. top roller 90 mm ø︱Diam. lower roll 90 mm ø︱Diam. extra roller - mm ø︱
          Year of make 2021 manual Roll length 1550 mm Max. sheet thickness 2 mm Number of rolls 3 Diam. top roll 90 mm ø diam. bottom roll 90 mm ø Machine size (lxwxh) 2580 x 700 x 1250 mm mm Machine weight 560 kg
            Roll length 1550 mm
            Max. plate thickness 2 mm
            Diam. top roller 90 mm ø
            Diam. lower roll 90 mm ø
            Diam. extra roller - mm ø
            Description :
            Year of make 2021
            manual
            Roll length 1550 mm
            Max. sheet thickness 2 mm
            Number of rolls 3
            Diam. top roll 90 mm ø
            diam. bottom roll 90 mm ø
            Machine size (lxwxh) 2580 x 700 x 1250 mm mm
            Machine weight 560 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls SAY-MAK SIRM 2050/130


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55688 · Rolls bending machine - 3 Rolls

          SAY-MAK - SIRM 2050/130 - - 2018 -

          Technical details
          sheet width 2050 mm︱plate thickness 3,00 mm max.︱roll length 2050 mm︱roll diam. toproll 130 mm︱bending speed 3,0 m/min︱total power requirement 2,2 kW︱weight 1530 kg︱range L-W-H 3220 x 1200 x 900 mm︱
          ** very good condition (!!) ** current new price ~ 17.000 euros Furnishing: - Electrically driven top and bottom rollers - swing-out top roller, with folding bearing - asymmetrical roller arrangement - manual delivery of the bottom roller, by hand wheel - self-braking main motor - Profile inlets in the rollers - Safety line - free-moving footswitch Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for rear roller
            sheet width 2050 mm
            plate thickness 3,00 mm max.
            roll length 2050 mm
            roll diam. toproll 130 mm
            bending speed 3,0 m/min
            total power requirement 2,2 kW
            weight 1530 kg
            range L-W-H 3220 x 1200 x 900 mm
            Description :
            ** very good condition (!!)
            ** current new price ~ 17.000 euros

            Furnishing:
            - Electrically driven top and bottom rollers
            - swing-out top roller, with folding bearing
            - asymmetrical roller arrangement
            - manual delivery of the bottom roller, by hand wheel
            - self-braking main motor
            - Profile inlets in the rollers
            - Safety line
            - free-moving footswitch

            Special equipment included in the price:
            - hardened rollers
            - Motorized rear roller adjustment
            - digital position display for rear roller


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls SAHINLER 2050 x 95


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-W258 · Rolls bending machine - 3 Rolls

          SAHINLER - 2050 x 95 - - 2018 -

          Technical details
          Roll length 2.050 mm︱Plate thickness - mm︱Diam. top roller 95 mm ø︱sheet thickness - max. 2 mm︱
          Brand Sahinler Type 2050 x 95 Year of make 2018 Machine weight 665 kg Mechanical Roll length 2.050 mm Max. sheet thickness 2 mm Number of rolls 3 Diam. top roll 95 mm ø Electrically powered
            Roll length 2.050 mm
            Plate thickness - mm
            Diam. top roller 95 mm ø
            sheet thickness - max. 2 mm
            Description :
            Brand Sahinler
            Type 2050 x 95
            Year of make 2018
            Machine weight 665 kg
            Mechanical
            Roll length 2.050 mm
            Max. sheet thickness 2 mm
            Number of rolls 3
            Diam. top roll 95 mm ø
            Electrically powered


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls Sahinler MRM-S 3050/190


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-W233 · Rolls bending machine - 3 Rolls

          Sahinler - MRM-S 3050/190 - - 2016 -

          Technical details
          CNC brand - ︱CNC model - ︱Control - ︱Roll length 3050 mm︱Capacity T︱Max. plate thickness 4 mm︱Plate thickness mm︱Diam. top roller 190 mm ø︱Diam. lower roll mm ø︱Side-roll diameter mm ø︱Diam. extra roller mm ø︱Pre-bend capacity mm︱Max. beding length mm︱Roll speed m/min︱Diameter mm ø︱Main engine power 4 kW︱Machine dimensions (lxwxh) 5200 x 950 x 1300 mm︱Machine weight 3750 kg︱
          Mechanical Minimum bending diameter: 285 mm ø Rear roller motor: 1.5 kW Electrically powered Includes: profile roll device, plastic upper roll and new iron roll in box
            CNC brand -
            CNC model -
            Control -
            Roll length 3050 mm
            Max. plate thickness 4 mm
            Diam. top roller 190 mm ø
            Main engine power 4 kW
            Machine dimensions (lxwxh) 5200 x 950 x 1300 mm
            Machine weight 3750 kg
            Description :
            Mechanical
            Minimum bending diameter: 285 mm ø
            Rear roller motor: 1.5 kW
            Electrically powered
            Includes: profile roll device, plastic upper roll and new iron roll in box



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls DAVI MAV 2050


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55698 · Rolls bending machine - 3 Rolls

          DAVI - MAV 2050 - - 2014 -

          Technical details
          sheet width 2000 mm︱plate thickness 72,00 mm︱pre-bending ︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. m︱
          Bend (cold) 66 mm Drive power 56 kW The rollers are adjusted hydraulically Top roller diameter 500 mm Side roller diameter 420 mm Working speed 5 m/min
            sheet width 2000 mm
            plate thickness 72,00 mm
            weight of the machine ca. 27 t
            Description :
            Bend (cold) 66 mm
            Drive power 56 kW
            The rollers are adjusted hydraulically
            Top roller diameter 500 mm
            Side roller diameter 420 mm
            Working speed 5 m/min


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls BERNARDO MRB 2050x 4


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040361 · Rolls bending machine - 3 Rolls

          BERNARDO - MRB 2050x 4 - - 2010 -

          Technical details
          sheet width 2050 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱roll diameter 140 mm︱engine output 2,2 kW︱machine weight ab. 1.530 kg︱dimensions 2820 x 900 x 1200 mm︱
            sheet width 2050 mm
            plate thickness 4,5 mm
            pre-bending 4,0 mm
            roll diameter 140 mm
            engine output 2,2 kW
            machine weight ab. 1.530 kg
            dimensions 2820 x 900 x 1200 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55670 · Rolls bending machine - 3 Rolls

          MG - AK 206 P - - 2008 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 3,5 x 1,5 x 1,3 m︱
          ** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 3,5 x 1,5 x 1,3 m
            Description :
            ** New price ~ 45.000 euros
            ** from a maintenance workshop
            ** rarely used (!!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls HESSE MSM 2030 x 1,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55690 · Rolls bending machine - 3 Rolls

          HESSE - MSM 2030 x 1,0 - - 2007 -

          Technical details
          sheet width 2030 mm︱plate thickness 1,00 mm︱roll length 2050 mm︱roll diameter Ø 95,0 mm︱work height max. 950 mm︱engine output 1,0 kW︱weight 275 kg︱range L-W-H 2700 x 700 x 1160 mm︱
          Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device
            sheet width 2030 mm
            plate thickness 1,00 mm
            roll length 2050 mm
            roll diameter Ø 95,0 mm
            work height max. 950 mm
            engine output 1,0 kW
            weight 275 kg
            range L-W-H 2700 x 700 x 1160 mm
            Description :
            Furnishing:
            - motor-driven asymmetrical 3-roller bending machine
            - hardened rollers
            - Manual folding storage for quick removal of the workpiece
            - Profile inlets at the end of the roller
            - Double foot switch for R/L run and emergency stop button
            - rear roller manually adjustable
            - manual infeed of the bottom roller
            - electrical safety device




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls KNUTH KRM 20/1,5


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040365 · Rolls bending machine - 3 Rolls

          KNUTH - KRM 20/1,5 - - 1999 -

          Technical details
          sheet width 2050 mm︱plate thickness 1,5 mm︱roll diameter 95 mm︱weight of the machine ca. 700 kg︱
            sheet width 2050 mm
            plate thickness 1,5 mm
            roll diameter 95 mm
            weight of the machine ca. 700 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls IMCAR SIHR 6/3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55686 · Rolls bending machine - 3 Rolls

          IMCAR - SIHR 6/3 - - 1996 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending capacity 4,00 mm︱upper roll diameter 200 mm︱lower roll diameter 180 mm︱bending speed 5,2 m/min︱diameter ca. 280 mm︱work height max. 980 mm︱total power requirement 5,5 kW︱weight of the machine ca. 3500 kg.︱range L-W-H 2900 x 1200 x 1280 mm︱
          Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending capacity 4,00 mm
            upper roll diameter 200 mm
            lower roll diameter 180 mm
            bending speed 5,2 m/min
            diameter ca. 280 mm
            work height max. 980 mm
            total power requirement 5,5 kW
            weight of the machine ca. 3500 kg.
            range L-W-H 2900 x 1200 x 1280 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic 3-roller bending machine
            - planetary movement of the bending rollers with reduced center distance
            - Hydraulic motors combined with planetary gears
            * for driving the 3 rollers
            - mobile operating unit, with connection cable + plug
            - extended roll ends for profile bending rolls
            - with conical bending device
            * Inclination of the side rollers by handwheels
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - free-moving operation
            * electric delivery rollers
            * electric turning/rolling movement
            * digital position display of the reels
            - hardened rollers SAE 1050 CK 45
            - Hydraulic folding store for removing closed pipes
            - safety device (cable)
            - Original instruction manual + CE declaration




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls Sahinler 2030x140


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-W263 · Rolls bending machine - 3 Rolls

          Sahinler - 2030x140 - - 1996 -

          Technical details
          Roll length 2.030 mm︱Plate thickness 4 mm︱Diam. top roller 140 mm ø︱Dimensions (L/W/H) 2.900 x 1.000 x 1.300 mm︱Number of rollers 3 St.︱
          Brand Sahinler Machine no W263 Type 2030x140 Year of make 1996 Machine dimensions (L×W×H) 2.900 x 1.000 x 1.300 mm Mechanical Roll length 2.030 mm Max. sheet thickness 4 mm Number of rolls 3 Diam. top roll 140 mm ø Electrically powered Wire bending grooves: 9 / 12 / 15mm
            Roll length 2.030 mm
            Plate thickness 4 mm
            Diam. top roller 140 mm ø
            Dimensions (L/W/H) 2.900 x 1.000 x 1.300 mm
            Number of rollers 3 St.
            Description :
            Brand Sahinler
            Machine no W263
            Type 2030x140
            Year of make 1996
            Machine dimensions (L×W×H) 2.900 x 1.000 x 1.300 mm
            Mechanical
            Roll length 2.030 mm
            Max. sheet thickness 4 mm
            Number of rolls 3
            Diam. top roll 140 mm ø
            Electrically powered

            Wire bending grooves: 9 / 12 / 15mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls DAVI MCO 2020


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3400011 · Rolls bending machine - 3 Rolls

          DAVI - MCO 2020 - - 1994 -

          Technical details
          sheet width 2000 mm︱plate thickness 10,0 mm︱pre-bending 8,0 mm︱diameter of upper rolls 205 mm︱diameter of lower rolls 190 mm︱total power requirement 5,5 kW︱weight of the machine ca. 3500 kg︱range L-W-H 4700 x 1250 x 1300 mm︱
          - Each roller hydraulically adjustable - Conical bending device - 3 powered rollers - hardened rollers - Digital actual value display for roller position and inclination - Roller ends for attaching profile rollers - Safety device (safety line)
            sheet width 2000 mm
            plate thickness 10,0 mm
            pre-bending 8,0 mm
            diameter of upper rolls 205 mm
            diameter of lower rolls 190 mm
            total power requirement 5,5 kW
            weight of the machine ca. 3500 kg
            range L-W-H 4700 x 1250 x 1300 mm
            Description :
            - Each roller hydraulically adjustable
            - Conical bending device
            - 3 powered rollers
            - hardened rollers
            - Digital actual value display for roller position and inclination
            - Roller ends for attaching profile rollers
            - Safety device (safety line)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls SCHÄFER SRMASY


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-14295 · Rolls bending machine - 3 Rolls

          SCHÄFER - SRMASY - - 1982 -

          Technical details
          sheet width 2000 mm︱plate thickness 4,0 mm︱distance between columns 2050 mm︱roll diameter 160 mm︱total power requirement KW︱weight of the machine ca. 2,75 t︱dimensions of the machine ca. 3,6 x 1,2 x 1,3 mm︱
          Sheet metal bending machine 3 rollers incl. foot switch
            sheet width 2000 mm
            plate thickness 4,0 mm
            distance between columns 2050 mm
            roll diameter 160 mm
            weight of the machine ca. 2,75 t
            dimensions of the machine ca. 3,6 x 1,2 x 1,3 mm
            Description :
            Sheet metal bending machine 3 rollers
            incl. foot switch


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls SCHAEFER SRMASY V-28


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55671 · Rolls bending machine - 3 Rolls

          SCHAEFER - SRMASY V-28 - - 1973 -

          Technical details
          sheet width 2000 mm︱plate thickness 8,00 mm max.︱plate thickness 8,00 mm anbiegen︱roll diam. toproll 240 mm︱roll diam. bottom roll 240 mm︱side roll diameter 240 mm︱work height max. ca. 1100 mm︱work speed 6,5 m/min︱voltage 400 V︱total power requirement 11,0 kW︱weight 4910 kg︱range L-W-H 4000 x 1300 x 1600 mm︱
          Furnishing: - robust 3-roller bending machine * with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller * An inclined position is possible by pushing out a coupling * Inclination for bending tapered tubes * Adjustment takes place via a geared motor - driven upper and lower roller * Side roller runs as a drag roller - original instruction manual + machine card
            sheet width 2000 mm
            plate thickness 8,00 mm max.
            plate thickness 8,00 mm anbiegen
            roll diam. toproll 240 mm
            roll diam. bottom roll 240 mm
            side roll diameter 240 mm
            work height max. ca. 1100 mm
            work speed 6,5 m/min
            voltage 400 V
            total power requirement 11,0 kW
            weight 4910 kg
            range L-W-H 4000 x 1300 x 1600 mm
            Description :
            Furnishing:
            - robust 3-roller bending machine
            * with asymmetrical roller arrangement
            - free-moving operation
            - analogue position display for rollers (scale)
            - Fixed top roller
            - manual infeed of the bottom roller, using handwheels with scales
            - electrically adjustable side roller
            * An inclined position is possible by pushing out a coupling
            * Inclination for bending tapered tubes
            * Adjustment takes place via a geared motor
            - driven upper and lower roller
            * Side roller runs as a drag roller
            - original instruction manual + machine card


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls Haeusler RMA 2500 x 30


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-W217 · Rolls bending machine - 3 Rolls

          Haeusler - RMA 2500 x 30 - - 1962 -

          Technical details
          Roll length 2500 mm︱Plate thickness 30 mm︱Diam. top roller 450 mm ø︱
          Mechanical
            Roll length 2500 mm
            Plate thickness 30 mm
            Diam. top roller 450 mm ø
            Description :
            Mechanical


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls HAUSLER RMA 2500/30


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-2210015 · Rolls bending machine - 3 Rolls

          HAUSLER - RMA 2500/30 - - 1962 -

          Technical details
          sheet width 2500 mm︱plate thickness 30 mm︱pre-bending ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 2210015 Type of machine Hydr. 3-roll bending machine Make HAUSLER Type RMA 2500/30 Build in 1962 Type of control conventional Additional information max. widht 2500 mm Max. plate thickness 30 mm 3 rolls diameter upper oll 450 mm
            sheet width 2500 mm
            plate thickness 30 mm
            Description :
            Stocknumber 2210015
            Type of machine Hydr. 3-roll bending machine
            Make HAUSLER
            Type RMA 2500/30
            Build in 1962
            Type of control conventional


            Additional information
            max. widht 2500 mm
            Max. plate thickness 30 mm
            3 rolls
            diameter upper oll 450 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls OSTAS SM 1070 x 76


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75002 · Rolls bending machine - 3 Rolls

          OSTAS - SM 1070 x 76 - - -neu- -

          Technical details
          sheet width 1070 mm︱plate thickness 2,0 mm︱distance between columns 1100 mm︱diameter of upper rolls 76 mm︱total power requirement 1,1 KW︱weight of the machine ca. 0,37 t︱dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm︱
          Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate
            sheet width 1070 mm
            plate thickness 2,0 mm
            distance between columns 1100 mm
            diameter of upper rolls 76 mm
            total power requirement 1,1 KW
            weight of the machine ca. 0,37 t
            dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm
            Description :
            Sheet bending machine with:
            - Capacity 1050 x 2 mm
            - High strength wrought iron rollers with SAE 1050 certificate.
            - Upper and lower roller driven, feed roller without drive
            - Footswitch
            - conical bending
            - Swiveling top roller
            - Safety device emergency leash
            - Documentation
            - 400 volts
            - CE certificate


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls OSTAS SBM 1070 x 95


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75003 · Rolls bending machine - 3 Rolls

          OSTAS - SBM 1070 x 95 - - -neu- -

          Technical details
          sheet width 1070 mm︱plate thickness 3,0 mm︱distance between columns 1100 mm︱diameter of upper rolls 95 mm︱tube diameter 140 mm︱total power requirement 1,1 KW︱weight of the machine ca. 0,37 t︱dimensions of the machine ca. 1,35 x 0,76 x 1,25 mm︱
            sheet width 1070 mm
            plate thickness 3,0 mm
            distance between columns 1100 mm
            diameter of upper rolls 95 mm
            tube diameter 140 mm
            total power requirement 1,1 KW
            weight of the machine ca. 0,37 t
            dimensions of the machine ca. 1,35 x 0,76 x 1,25 mm
            Description :



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •