,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Bar Stock Shearing Machines

          used Sheet metal working / shaeres / bending Bar Stock Shearing Machines HEZEL Scherscheiben


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3790 · Bar Stock Shearing Machines

          HEZEL - Scherscheiben - - unbekannt -

          Technical details
          diameter 160 mm︱thickness #1: 47,88 mm︱thickness #2: 48,77 mm︱
            diameter 160 mm
            thickness #1: 47,88 mm
            thickness #2: 48,77 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake LOTZE 391


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3749 · Hydr. pressbrake

          LOTZE - 391 - - 1992 - DNC 90

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱column daylight 2540 mm︱stroke 300 mm︱table height over floor 750 mm︱control DNC 90 ︱total power requirement 8,6 kW︱weight of the machine ca. 8500 t︱dimensions of the machine ca. m︱Overall size ca. 3540x1240x2555 mm︱
          Machines type 391 Machine no.: 67 39130049 -4 controlled axes -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools -Tool cabinet extra large stroke 300mm -various tools Machine does not have a valid UVV
            pressure 100 t
            chamfer lenght 3100 mm
            column daylight 2540 mm
            stroke 300 mm
            table height over floor 750 mm
            control DNC 90
            total power requirement 8,6 kW
            weight of the machine ca. 8500 t
            Overall size ca. 3540x1240x2555 mm
            Description :
            Machines type 391
            Machine no.: 67 39130049

            -4 controlled axes
            -crowning
            -Extended back gauge
            -pneumatic matrix displacement
            -hydraulic upper tool clamping
            -various tools
            -Tool cabinet

            extra large stroke 300mm

            -various tools

            Machine does not have a valid UVV


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake EHT EHP S 15-35


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3096 · Hydr. pressbrake

          EHT - EHP S 15-35 - - 1990 - Cybelec 34 PS-CN

          Technical details
          pressure 1500 kN︱chamfer lenght 3550 mm︱distance between columns 3044 mm︱Control Cybelec 34 PS-CN ︱column arm 350 mm︱max. ram stroke 220 mm︱dimensions of the machine ca. 3200 x 4200 x 2100 m︱sheet support hinten / back ︱number of support arms 2, verschiebbar / adjust. ︱die shift ︱hydraulical tool clamping ︱upper tool quick change system ︱crown
          3 sets of tools included
            pressure 1500 kN
            chamfer lenght 3550 mm
            distance between columns 3044 mm
            Control Cybelec 34 PS-CN
            column arm 350 mm
            max. ram stroke 220 mm
            dimensions of the machine ca. 3200 x 4200 x 2100 m
            sheet support hinten / back
            number of support arms 2, verschiebbar / adjust.
            Description :
            3 sets of tools included


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FISCHER DAP 5 /1500


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3762 · Hydr. pressbrake

          FISCHER - DAP 5 /1500 - - 1986 2003 - Cybelec DNC 1200

          Technical details
          pressure 50 t︱chamfer lenght 1500 mm︱distance between columns 1220 mm︱Control Cybelec DNC 1200 ︱closing speed 95 mm/min︱working feed 1-10 mm/sec︱work stroke 156 mm︱overrun time 59 ms︱tracking travel 6 mm︱throat 200 mm︱distance table - lower edge of ram 301 mm︱table width 160 mm︱table height 850 mm︱x-axis 550 mm︱travel R-axis +/- 50 ︱weight ca. 3600 kg︱dimensions mm︱
          a lot of lower and upper tools incl. work light
            pressure 50 t
            chamfer lenght 1500 mm
            distance between columns 1220 mm
            Control Cybelec DNC 1200
            closing speed 95 mm/min
            working feed 1-10 mm/sec
            work stroke 156 mm
            overrun time 59 ms
            tracking travel 6 mm
            throat 200 mm
            distance table - lower edge of r. 301 mm
            table width 160 mm
            table height 850 mm
            x-axis 550 mm
            travel R-axis +/- 50
            weight ca. 3600 kg
            Description :
            a lot of lower and upper tools
            incl. work light




        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake MENGELE D80-2


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3418 · Hydr. pressbrake

          MENGELE - D80-2 - - 1981 - keine

          Technical details
          pressure 80 t︱chamfer lenght 2550 mm︱distance between columns 2050 mm︱Control keine ︱stroke 250 mm︱light barrier SICK
          The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block)
            pressure 80 t
            chamfer lenght 2550 mm
            distance between columns 2050 mm
            Control keine
            stroke 250 mm
            light barrier SICK
            Description :
            The machine was previously equipped with a CNC control,

            now converted to electrically manual operation.
            Digital display for backgauge.
            electrical stroke adjustment
            Machine is functional and has been used sporadically for the past 15 years,
            as previous owner preferred to use a folding machine.
            tools included:
            1 set of upper tool
            1 lower tool (die block)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine MEWAG RB 60A


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3764 · Pipe-Bending Machine

          MEWAG - RB 60A - - unbekannt -

          Technical details
          tube diameter max 60 mm︱wall strength 3 mm︱bending capacity pipes 60 x 3 mm︱weight of the machine ca. 2000 kg︱dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm︱
          including a lot of accessories 6 mandrels, mandrel extension length 6000 mm and various bending tools (see photos)
            tube diameter max 60 mm
            wall strength 3 mm
            bending capacity pipes 60 x 3 mm
            weight of the machine ca. 2000 kg
            dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm
            Description :
            including a lot of accessories
            6 mandrels, mandrel extension length 6000 mm
            and various bending tools (see photos)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic TUMAC QC 6 x 3200


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3766 · Plate Shear - Hydraulic

          TUMAC - QC 6 x 3200 - - 2008 - eView

          Technical details
          sheet width 3200 mm︱plate thickness 6 mm︱distance between columns 3200 mm︱throat mm︱back stop - adjustable 20 - 600 mm︱down holder ︱dimensions ca. 4010 x 1610 x 1620 mm︱engine output 7,5 kW︱Control eView ︱weight of the machine ca. 7,2 t︱
          CNC swing cut panel shears 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available
            sheet width 3200 mm
            plate thickness 6 mm
            distance between columns 3200 mm
            back stop - adjustable 20 - 600 mm
            dimensions ca. 4010 x 1610 x 1620 mm
            engine output 7,5 kW
            Control eView
            weight of the machine ca. 7,2 t
            Description :
            CNC swing cut panel shears

            3 support arms and 1 angle stop
            Ball rollers in the table
            Operating instructions available


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-50


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3474 · Plate Shear - Hydraulic

          EHT - TSS 6-50 - - 1970 -

          Technical details
          sheet width 5000 mm︱plate thickness 6 mm︱distance between columns 5030 mm︱throat 340 mm︱weight of the machine ca. 14 t︱dimensions of the machine ca. 5500 x 2250 x 2200 mm︱
            sheet width 5000 mm
            plate thickness 6 mm
            distance between columns 5030 mm
            throat 340 mm
            weight of the machine ca. 14 t
            dimensions of the machine ca. 5500 x 2250 x 2200 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SCHARRINGHAUSEN MTU / 4 / 2600


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3775 · Plate Shear - Hydraulic

          SCHARRINGHAUSEN - MTU / 4 / 2600 - - 1964 -

          Technical details
          sheet width 2600 mm︱plate thickness 4 mm︱weight of the machine ca. 3 t︱
            sheet width 2600 mm
            plate thickness 4 mm
            weight of the machine ca. 3 t


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Press Brake - Hydraulic

          used Sheet metal working / shaeres / bending Press Brake - Hydraulic BEYELER PR6  150 x 4100


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3778 · Press Brake - Hydraulic

          BEYELER - PR6 150 x 4100 - - 1999 - Cybelec ModEva15T

          Technical details
          pressure 150 t︱chamfer lenght 4100 mm︱stroke max. 315 mm︱Control Cybelec ModEva15T ︱pressing speed 1 --> 10 mm/sec︱closing speed max. 200 mm/sec︱Stop Time max. 110 mS︱compressed air max 8 bar︱rules for accident prevention 05.2024 ︱DGUV 2025 ︱total power requirement kW︱weight of the machine ca. 13,2 t︱
          - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type “RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax angle measuring device - Hold up at the back gauge - 2 "parking spaces" for the support arms and bending aid (500 mm left, 500 mm right)
            pressure 150 t
            chamfer lenght 4100 mm
            stroke max. 315 mm
            Control Cybelec ModEva15T
            pressing speed 1 --> 10 mm/sec
            closing speed max. 200 mm/sec
            Stop Time max. 110 mS
            compressed air max 8 bar
            rules for accident prevention 05.2024
            DGUV 2025
            weight of the machine ca. 13,2 t
            Description :
            - Automatic bounce compensation
            - Hydraulic crowning of the lower beam
            - Table with hydraulic die clamping
            - 2 pieces of aluminum support arms with 3 grooves including stainless scale and
            Angle stop
            - hydraulic ram clamping type “RF-A”
            - Hydraulic unit for punch and die clamping
            - Lifting and installation height increase by 100 mm
            - Roller conveyor guide on the front of the lower beam for front support arms
            - 2 pieces of H-axes manually with handwheel (height adjustment of the front
            Support arms over 200 mm, the weight is balanced by gas springs)
            - 2 pieces of hydraulic bending aids
            - 1st and 2nd measuring point for the Mini-Rotax angle measuring device
            - Hold up at the back gauge
            - 2 "parking spaces" for the support arms and bending aid (500 mm left, 500 mm
            right)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Section Shear - Combined

          used Sheet metal working / shaeres / bending Section Shear - Combined MUHR & BENDER HIW 550-305


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3221 · Section Shear - Combined

          MUHR & BENDER - HIW 550-305 - - 1991 -

          Technical details
          round bar steel 45 mm︱square edge steel 42 mm︱L-beam 140 x 13 mm︱flat steel 350 x 20 mm︱pressure 550 kN︱throat 305 mm︱notching: rectangle tool mm︱total power requirement 5,5 kW︱weight of the machine ca. 1260 kg︱dimensions of the machine ca. 1360 x 750 x 1565 mm︱
          2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.
            round bar steel 45 mm
            square edge steel 42 mm
            L-beam 140 x 13 mm
            flat steel 350 x 20 mm
            pressure 550 kN
            throat 305 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1260 kg
            dimensions of the machine ca. 1360 x 750 x 1565 mm
            Description :
            2 working cylinder with 2 separated electric foot switch for 2-people-handling

            New notching table, new knife for the rectangle notcher and new punching table included

            For further information please see brochure.


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.