,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Hand-Lever Shear

          used Sheet metal working / shaeres / bending Hand-Lever Shear PEDDINGHAUS 4 RP 8


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26642 · Hand-Lever Shear

          PEDDINGHAUS - 4 RP 8 - - 1984 -

          Technical details
          sheet width - max. 40 mm︱plate thickness 8 mm︱L-beam 40 x 6 mm︱weight of the machine ca. 0,08 t︱dimensions of the machine ca. 1 x 1 x 1,5 m︱
            sheet width - max. 40 mm
            plate thickness 8 mm
            L-beam 40 x 6 mm
            weight of the machine ca. 0,08 t
            dimensions of the machine ca. 1 x 1 x 1,5 m


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake WIEGER AWHC 160/45 HH 300


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-19129 · Hydr. pressbrake

          WIEGER - AWHC 160/45 HH 300 - - 1980 - konv.

          Technical details
          pressure 0160 t︱chamfer lenght 5120 mm︱distance between columns 4050 mm︱Control konv. ︱throat 300 mm︱table width 200 mm︱stroke max. 200 mm︱dayligth 400 mm︱feed down 50 mm/sec︱feed up 100 mm/sec︱feed under pressure 5 mm/sec︱total power requirement 11 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 5,4 x 1,75 x 3,3 m︱
          Machine will be supplied with many tools.
            pressure 0160 t
            chamfer lenght 5120 mm
            distance between columns 4050 mm
            Control konv.
            throat 300 mm
            table width 200 mm
            stroke max. 200 mm
            dayligth 400 mm
            feed down 50 mm/sec
            feed up 100 mm/sec
            feed under pressure 5 mm/sec
            total power requirement 11 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 5,4 x 1,75 x 3,3 m
            Description :
            Machine will be supplied with many tools.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake FISCHER HAKS 16/2500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-19141 · Hydr. pressbrake

          FISCHER - HAKS 16/2500 - - 1980 -

          Technical details
          pressure 0160 t︱chamfer lenght 2500 mm︱distance between columns 2000 mm︱column arm 315 mm︱stroke 190 mm︱table surface area 2500 x 400 mm︱return speed 100 mm/sec︱feed up 100 mm/sec︱feed down 50 mm/sec︱working feed 6 mm/sec︱table height over floor 850 mm︱ram surface 2500 x 400 mm︱flute distance 500 ︱T-slots 6 x 18mm ︱power capacity 18,5 kW︱oil volume 500 l︱total power requirement 22 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,20 x 2,40 x 2,60 m︱
          Machine was modernized conform to German safety regulations in 1993.
            pressure 0160 t
            chamfer lenght 2500 mm
            distance between columns 2000 mm
            column arm 315 mm
            stroke 190 mm
            table surface area 2500 x 400 mm
            return speed 100 mm/sec
            feed up 100 mm/sec
            feed down 50 mm/sec
            working feed 6 mm/sec
            table height over floor 850 mm
            ram surface 2500 x 400 mm
            flute distance 500
            T-slots 6 x 18mm
            power capacity 18,5 kW
            oil volume 500 l
            total power requirement 22 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,20 x 2,40 x 2,60 m
            Description :
            Machine was modernized conform to German safety regulations in 1993.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30/16


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18181 · Plate Shear - Hydraulic

          STEINER - HTS 30/16 - - 1994 -

          Technical details
          sheet width 3000 mm︱plate thickness 16 mm︱distance between columns 3200 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱Number of downholders 12 St.︱cutting angle 0,5 - 2,5 °︱cutting angle adjustment 1- 2,5 °︱back stop - adjustable 0- 1000 mm︱total power requirement 30 kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. 3,8 x 2,65 x 2,85 m︱
          Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.
            sheet width 3000 mm
            plate thickness 16 mm
            distance between columns 3200 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            Number of downholders 12 St.
            cutting angle 0,5 - 2,5 °
            cutting angle adjustment 1- 2,5 °
            back stop - adjustable 0- 1000 mm
            total power requirement 30 kW
            weight of the machine ca. 19 t
            dimensions of the machine ca. 3,8 x 2,65 x 2,85 m
            Description :
            Machine was overhauled in 2010 and was modernized with light barrier at table.
            Machine has an automatic back stop with DRO. Cutting angel is adjusted by
            motor. Cutting gap is manually adjusted by adjustment of table. Along with the
            machine we supply a loading/unloading table.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SCHARRINGHAUSEN TSZ 31/13


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18187 · Plate Shear - Hydraulic

          SCHARRINGHAUSEN - TSZ 31/13 - - 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱distance between columns 3150 mm︱back stop - adjustable ja mm︱connected load 33 kW︱weight of the machine ca. 16,0 t︱dimensions 4,0 x 2,3 x 2,25 m︱
          Hydraulic shearing machine with -back gauge with positioning control -adjustable cutting gap -adjustable cutting angle -illuminated cutting area -3 sets of spare knifes -modernized to Siemens S7
            sheet width 3100 mm
            plate thickness 13 mm
            distance between columns 3150 mm
            back stop - adjustable ja mm
            connected load 33 kW
            weight of the machine ca. 16,0 t
            dimensions 4,0 x 2,3 x 2,25 m
            Description :
            Hydraulic shearing machine with
            -back gauge with positioning control
            -adjustable cutting gap
            -adjustable cutting angle
            -illuminated cutting area
            -3 sets of spare knifes
            -modernized to Siemens S7


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 16 - 20


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18188 · Plate Shear - Hydraulic

          EHT - TSS 16 - 20 - - 1971 -

          Technical details
          sheet width 2000 mm︱plate thickness 16 bei St 42 mm︱passage width 2250 mm︱impact length 1000 mm︱blade length 2005 mm︱throat 600 mm︱cutting gap adjustment 0,05 - 0,95 mm︱cutting angle 1° 40' °︱down holder 10 Stück︱back stop - adjustable 10 - 1000 mm︱table: 2500 x 700 ︱table height over floor 800 mm︱quantity of oil 900 l︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3 x 2,3 x 2,3 m︱voltage 380 V︱
          Food switch, material support beams, spare knifes.
            sheet width 2000 mm
            plate thickness 16 bei St 42 mm
            passage width 2250 mm
            impact length 1000 mm
            blade length 2005 mm
            throat 600 mm
            cutting gap adjustment 0,05 - 0,95 mm
            cutting angle 1° 40' °
            down holder 10 Stück
            back stop - adjustable 10 - 1000 mm
            table: 2500 x 700
            table height over floor 800 mm
            quantity of oil 900 l
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3 x 2,3 x 2,3 m
            voltage 380 V
            Description :
            Food switch, material support beams, spare knifes.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI 527


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18192 · Plate Shear - Mechanical

          FASTI - 527 - - 2003 -

          Technical details
          sheet width 2500 mm︱plate thickness 5 mm︱distance between columns 2550 mm︱sheet width - max. 2540 mm︱number of strokes - loaded 50 Hübe/min.︱cutting angle 1,2° °︱total power requirement 7,5 kW︱weight of the machine ca. 3200 t︱dimensions of the machine ca. 2,8 x 2 x 1,6 m︱
          It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.
            sheet width 2500 mm
            plate thickness 5 mm
            distance between columns 2550 mm
            sheet width - max. 2540 mm
            number of strokes - loaded 50 Hübe/min.
            cutting angle 1,2° °
            total power requirement 7,5 kW
            weight of the machine ca. 3200 t
            dimensions of the machine ca. 2,8 x 2 x 1,6 m
            Description :
            It has an electronic back gauge with digital readout.
            It has 1 side guiding arm, 2 support arm, foot switch etc.
            It has a sheet holding device at the back side.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.