,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1250


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325319 · Plate Shear - Hydraulic

          RABBA - HS 16/1250 - - 1993 - konv.

          Technical details
          sheet width 1250 mm︱plate thickness 16.0 mm︱thickness at "Niro-steel" 10,0 mm︱blade length 1300 mm︱cutting angle 2-3 Grad︱no. of strokes 13 Hub/min︱back stop - adjustable 500 mm︱Control konv. ︱table height 810 mm︱blade length 1300 mm︱oil volume 350 l︱engine output 18.5 kW︱weight 3900 kg︱range L-W-H 2150 x 1200 x 1900 mm︱
          ** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319
            sheet width 1250 mm
            plate thickness 16.0 mm
            thickness at "Niro-steel" 10,0 mm
            blade length 1300 mm
            cutting angle 2-3 Grad
            no. of strokes 13 Hub/min
            back stop - adjustable 500 mm
            Control konv.
            table height 810 mm
            blade length 1300 mm
            oil volume 350 l
            engine output 18.5 kW
            weight 3900 kg
            range L-W-H 2150 x 1200 x 1900 mm
            Description :
            ** Machine from a maintenance workshop (!)

            Furnishing:
            - heavy / robust electro-hydraulic sheet metal plate shears
            - Machine body in a closed design as an all-steel welded construction
            - Knife upper cheek slides in a long downward direction over the knife edge
            .. protruding plastic guides
            - Cutting is done hydraulically via two hydraulic cylinders
            - The upper beam returns to its starting position in two ways
            .. Spring batteries on the side stands
            - manual back gauge, adjustable from the rear
            * Adjustment by handwheel, with mm scale
            - hydraulic cutting angle adjustment
            - manual cutting gap adjustment
            - 2x side stop, with mm scale and T-slot
            - Foot switch for lifting version
            - rear sheet metal slide
            - 2x side/rear protective grilles
            - original instruction manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1250


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94154 · Plate Shear - Hydraulic

          RABBA - HS 16/1250 - - 1993 - konv.

          Technical details
          sheet width 1250 mm︱plate thickness 16,00 mm︱thickness at "Niro-steel" 10,00 mm︱blade length 1300 mm︱cutting angle 2-3 Grad︱no. of strokes 13 Hub/min︱back stop - adjustable 500 mm︱Control konv. ︱table height 810 mm︱blade length 1300 mm︱oil volume 350 l︱engine output 18.5 kW︱weight 3900 kg︱range L-W-H 2150 x 1200 x 1900 mm︱
          ** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual
            sheet width 1250 mm
            plate thickness 16,00 mm
            thickness at "Niro-steel" 10,00 mm
            blade length 1300 mm
            cutting angle 2-3 Grad
            no. of strokes 13 Hub/min
            back stop - adjustable 500 mm
            Control konv.
            table height 810 mm
            blade length 1300 mm
            oil volume 350 l
            engine output 18.5 kW
            weight 3900 kg
            range L-W-H 2150 x 1200 x 1900 mm
            Description :
            ** Machine from a maintenance workshop (!)

            Furnishing:
            - heavy / robust electro-hydraulic sheet metal plate shears
            - Machine body in a closed design as an all-steel welded construction
            - Knife upper cheek slides in a long downward direction over the knife edge
            .. protruding plastic guides
            - Cutting is done hydraulically via two hydraulic cylinders
            - The upper beam returns to its starting position in two ways
            .. Spring batteries on the side stands
            - manual back gauge, adjustable from the rear
            * Adjustment by handwheel, with mm scale
            - hydraulic cutting angle adjustment
            - manual cutting gap adjustment
            - 2x side stop, with mm scale and T-slot
            - Foot switch for lifting version
            - rear sheet metal slide
            - 2x side/rear protective grilles
            - original instruction manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 6/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-495 · Plate Shear - Hydraulic

          RABBA - HS 6/1000 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1030 mm︱ 6 mm︱ 4 mm︱ 14 1/min︱ 3 °︱ 7500 mm︱ 5.5 kW︱ 100 l︱ 900 mm︱ 1550 mm︱ 1150 mm︱ 1600 mm︱ 1700 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1030 mm
            6 mm
            4 mm
            14 1/min
            3 °
            7
            500 mm
            5.5 kW
            100 l
            900 mm
            1550 mm
            1150 mm
            1600 mm
            1700 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 20/1500


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-509 · Plate Shear - Hydraulic

          RABBA - HS 20/1500 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1530 mm︱ 20 mm︱ 15 mm︱ 8 1/min︱ 3 °︱ 7500 mm︱ 30 kW︱ 250 l︱ 950 mm︱ 2100 mm︱ 1400 mm︱ 2000 mm︱ 6000 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1530 mm
            20 mm
            15 mm
            8 1/min
            3 °
            7
            500 mm
            30 kW
            250 l
            950 mm
            2100 mm
            1400 mm
            2000 mm
            6000 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 8/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-497 · Plate Shear - Hydraulic

          RABBA - HS 8/1000 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1030 mm︱ 8 mm︱ 5 mm︱ 14 1/min︱ 3 °︱ 7500 mm︱ 7.5 kW︱ 100 l︱ 900 mm︱ 1550 mm︱ 1150 mm︱ 1600 mm︱ 1800 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1030 mm
            8 mm
            5 mm
            14 1/min
            3 °
            7
            500 mm
            7.5 kW
            100 l
            900 mm
            1550 mm
            1150 mm
            1600 mm
            1800 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 12/1500


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-503 · Plate Shear - Hydraulic

          RABBA - HS 12/1500 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1530 mm︱ 12 mm︱ 9 mm︱ 8 1/min︱ 3 °︱ 8500 mm︱ 15 kW︱ 180 l︱ 950 mm︱ 2200 mm︱ 1200 mm︱ 1800 mm︱ 3400 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1530 mm
            12 mm
            9 mm
            8 1/min
            3 °
            8
            500 mm
            15 kW
            180 l
            950 mm
            2200 mm
            1200 mm
            1800 mm
            3400 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-505 · Plate Shear - Hydraulic

          RABBA - HS 16/1250 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1280 mm︱ 16 mm︱ 12 mm︱ 8 1/min︱ 3 °︱ 7500 mm︱ 22.5 kW︱ 250 l︱ 950 mm︱ 2100 mm︱ 1400 mm︱ 2000 mm︱ 5000 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1280 mm
            16 mm
            12 mm
            8 1/min
            3 °
            7
            500 mm
            22.5 kW
            250 l
            950 mm
            2100 mm
            1400 mm
            2000 mm
            5000 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1500


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-507 · Plate Shear - Hydraulic

          RABBA - HS 16/1500 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1530 mm︱ 16 mm︱ 12 mm︱ 7 1/min︱ 3 °︱ 8500 mm︱ 22.5 kW︱ 250 l︱ 950 mm︱ 2350 mm︱ 1400 mm︱ 2000 mm︱ 5200 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1530 mm
            16 mm
            12 mm
            7 1/min
            3 °
            8
            500 mm
            22.5 kW
            250 l
            950 mm
            2350 mm
            1400 mm
            2000 mm
            5200 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 10/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-499 · Plate Shear - Hydraulic

          RABBA - HS 10/1000 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1030 mm︱ 10 mm︱ 6 mm︱ 10 1/min︱ 3 °︱ 75000 mm︱ 11 kW︱ 100 l︱ 900 mm︱ 1550 mm︱ 1150 mm︱ 1600 mm︱ 1900 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1030 mm
            10 mm
            6 mm
            10 1/min
            3 °
            7
            5000 mm
            11 kW
            100 l
            900 mm
            1550 mm
            1150 mm
            1600 mm
            1900 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 12/1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-501 · Plate Shear - Hydraulic

          RABBA - HS 12/1250 - - -

          Technical details
          neuca. 12 Wochen ab Auftrags1280 mm︱ 12 mm︱ 9 mm︱ 9 1/min︱ 3 °︱ 7500 mm︱ 15 kW︱ 180 l︱ 950 mm︱ 1950 mm︱ 1200 mm︱ 1800 mm︱ 3200 kg︱
          hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting
            neu
            ca. 12 Wochen ab Auftrags
            1280 mm
            12 mm
            9 mm
            9 1/min
            3 °
            7
            500 mm
            15 kW
            180 l
            950 mm
            1950 mm
            1200 mm
            1800 mm
            3200 kg
            Description :
            hydr. drive unit, completely integrated in the machine body
            overload safety, hydraulic and electrical
            adjusting of the cutting angle
            adjusting of the cutting gap
            blank holder pressure, adjustable
            support arm with angle stop and scale up to 600 mm
            4 rotating knives for VA steel
            movable pedal switch with solenoid valves
            manual adjustable and foldable back gauge
            exchangeable machine table support
            section area lighting


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.