,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls MG AK 206 P


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9401219 · Plate Bending Machine - 3 Rolls

          MG - AK 206 P - - 2008 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,0 mm
            pre-bending 4,0 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 45.000 euros
            ** from a maintenance workshop
            ** rarely used (!!)

            Furnishing:
            - hydraulic 3-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls MG AK 206 P


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9401218 · Plate Bending Machine - 3 Rolls

          MG - AK 206 P - - 2007 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,0 mm
            pre-bending 4,0 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3.000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 48.000 euros
            ** from a repair workshop - good condition (!)

            Furnishing:
            - hydraulic 3-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55667 · Plate Bending Machine - 4 Rolls

          MG - AK 206 P - - 2007 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱
          ** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3.000 kg
            dimensions of the machine ca. 3500 x 1500 x 1300 mm
            Description :
            ** New price ~ 48.000 euros
            ** from a repair workshop - good condition (!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls MG EH 123 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55703 · Plate Bending Machine - 4 Rolls

          MG - EH 123 P - - 2001 - MG CNC

          Technical details
          sheet width 1230 mm︱plate thickness 3,00 mm︱pre-bending 1,50 mm︱upper roll diameter 80,0 mm︱lower roll diameter 120 mm︱side roll diameter 110 mm︱Control MG CNC ︱total power requirement 2,2 kW︱weight of the machine ca. 1160 kg.︱
          ** very good condition ** used very little (!!) Furnishing: - hydraulic four-roller round bending machine - mobile operation (CNC) - digital position displays of the rollers - Conical bending device - robust welded steel construction - hydraulic direct drive of the central rollers - hydraulic folding storage for removing pipes - Pressure gauge for hydraulic pressure display - Safety device - Machine documentation
            sheet width 1230 mm
            plate thickness 3,00 mm
            pre-bending 1,50 mm
            upper roll diameter 80,0 mm
            lower roll diameter 120 mm
            side roll diameter 110 mm
            Control MG CNC
            total power requirement 2,2 kW
            weight of the machine ca. 1160 kg.
            Description :
            ** very good condition
            ** used very little (!!)

            Furnishing:
            - hydraulic four-roller round bending machine
            - mobile operation (CNC)
            - digital position displays of the rollers
            - Conical bending device
            - robust welded steel construction
            - hydraulic direct drive of the central rollers
            - hydraulic folding storage for removing pipes
            - Pressure gauge for hydraulic pressure display
            - Safety device
            - Machine documentation



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Rolls bending machine - 3 Rolls

          used Sheet metal working / shaeres / bending Rolls bending machine - 3 Rolls MG AK 206 P


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55670 · Rolls bending machine - 3 Rolls

          MG - AK 206 P - - 2008 -

          Technical details
          sheet width 2050 mm︱plate thickness 6,00 mm︱pre-bending 4,00 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 3,5 x 1,5 x 1,3 m︱
          ** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions
            sheet width 2050 mm
            plate thickness 6,00 mm
            pre-bending 4,00 mm
            diameter of upper rolls 160 mm
            diameter of lower rolls 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 3,5 x 1,5 x 1,3 m
            Description :
            ** New price ~ 45.000 euros
            ** from a maintenance workshop
            ** rarely used (!!)

            Furnishing:
            - hydraulic 4-roller bending machine
            - with conical bending device
            * Inclination of the bottom roller and the side rollers
            * Alignment in parallelism in each side roller position
            * Hardened stop roller
            * Workpiece limitation for a cone with a 45° pitch:
            * Working length max: 60%
            * Bending capacity max: 50%
            - pivoting operation
            - Digital displays (2 pieces) for the side roller position
            - Adjustable contact pressure of the bottom roller with manometer
            - hardened rollers SAE 1050 CK 45
            - Conical bending device
            - Hydraulic folding store for removing closed pipes
            - Direct drive of the upper and lower roller (planetary gear)
            - Parallelism of the side rollers via torsion shafts
            - Permanent lubrication of all bearings
            - Security device
            - Bed. Instructions


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.