,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Pneumatic Press

          Machinelist: Pneumatic Press


          Pneumatic Press

          used Presses Pneumatic Press BERG & SCHMID PND 45/S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69530 · Pneumatic Press

          BERG & SCHMID - PND 45/S - - - neu - -

          Technical details
          pressure 4,5 kN︱stroke 40 mm︱throat 95 mm︱Working height from to 95 - 240 mm︱table surface area 160 x 110 mm︱spindle diameter 25 mm︱weight of the machine ca. 24 Kg︱dimensions 160 x 230 mm︱
          Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings
            pressure 4,5 kN
            stroke 40 mm
            throat 95 mm
            Working height from t. 95 - 240 mm
            table surface area 160 x 110 mm
            spindle diameter 25 mm
            weight of the machine ca. 24 Kg
            dimensions 160 x 230 mm
            Description :
            Direct-acting pneumatic presses
            bring the full pressure performance over the entire stroke length. You will
            above all
            used when long-stroke parts are machined with constant force
            Need to become.
            Convincing technology
            • Long and precise spindle guide for maximum dimensional accuracy
            • Hardened and ground piston rod for practically unlimited service life
            • Double-acting cylinders with end position cushioning on both sides
            • Double guide rings in the piston, constant and quiet running
            • Oil resistant sealing elements
            Special features of the PND series
            • Spindle secured against twisting
            • Spindle return on the PND 85/S only via a cylinder chamber
            additional air savings
            • Easy, quick and precise working height adjustment in 2 steps:
            – Basic setting by simply loosening the clamping screws on the stand
            – Precision fine adjustment via the stroke limiting ring on the piston rod
            Additional benefit:
            Faster cycle time and air savings
          used Presses Pneumatic Press BERG & SCHMID PND 85 S


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6133 · Pneumatic Press

          BERG & SCHMID - PND 85 S - - 2005 -

          Technical details

          used Presses Pneumatic Press BERG & SCHMID PND 85/S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69531 · Pneumatic Press

          BERG & SCHMID - PND 85/S - - - neu - -

          Technical details
          pressure 8,5 kN︱stroke 40 mm︱throat 95 mm︱Working height from to 95 - 240 mm︱table surface area 160 x 110 mm︱spindle diameter 25 mm︱weight of the machine ca. 27 Kg︱dimensions 160 x 230 mm︱
            pressure 8,5 kN
            stroke 40 mm
            throat 95 mm
            Working height from t. 95 - 240 mm
            table surface area 160 x 110 mm
            spindle diameter 25 mm
            weight of the machine ca. 27 Kg
            dimensions 160 x 230 mm
            Description :

          used Presses Pneumatic Press BERG & SCHMID PNK 3400


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6134 · Pneumatic Press

          BERG & SCHMID - PNK 3400 - - 2005 -

          Technical details

          used Presses Pneumatic Press BURGER DO 3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063138 · Pneumatic Press

          BURGER - DO 3 - - ? - konventionell

          Technical details
          pressure at min. stroke 3 t︱throat 150 mm︱stroke - 39 mm︱distance table/ram, max. stroke up, adjustment up 200 mm︱table surface area 280 x 380 mm︱pressure at min. stroke 1,5 t︱no. of strokes with min. stroke - 80 /min︱no. of strokes with max. stroke - 50 /min︱hole in the table 45 mm︱table height over floor 790 mm︱ram surface 115 x 100 mm︱Required air-pressure 4 bar︱weight 0,2 t︱Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) press force at minimum stroke length approx. 1,5 t stroke rate at minimum stroke length up to approx. 80 /min stroke rate at minimum stroke length up to approx. 60 /min hole in table approx. 45 mm can be offered with or without putting into operation
            pressure at min. stroke 3 t
            throat 150 mm
            stroke - 39 mm
            distance table/ram, max. stroke . 200 mm
            table surface area 280 x 380 mm
            pressure at min. stroke 1,5 t
            no. of strokes with min. stroke - 80 /min
            no. of strokes with max. stroke - 50 /min
            hole in the table 45 mm
            table height over floor 790 mm
            ram surface 115 x 100 mm
            Required air-pressure 4 bar
            weight 0,2 t
            Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            press force at minimum stroke length approx. 1,5 t
            stroke rate at minimum stroke length up to approx. 80 /min
            stroke rate at minimum stroke length up to approx. 60 /min
            hole in table approx. 45 mm
            can be offered with or without putting into operation
          used Presses Pneumatic Press BURGER DO 5


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113132 · Pneumatic Press

          BURGER - DO 5 - - ? - konventionell

          Technical details
          pressure 5 t︱throat 150 mm︱stroke 40 mm︱no. of strokes 0 - 80 /min︱distance table/ram, max. stroke up, adjustment up 260 mm︱table surface area 340 x 270 mm︱hole in the table 45 mm︱table height over floor 780 mm︱table adjustable 120 mm︱ram surface 60 mm︱weight 0,3 t︱dimensions (WxDxH) 0,4 x 0,8 x 1,4 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with adjustable table, foot operation can be offered with or without putting into operation
            pressure 5 t
            throat 150 mm
            stroke 40 mm
            no. of strokes 0 - 80 /min
            distance table/ram, max. stroke . 260 mm
            table surface area 340 x 270 mm
            hole in the table 45 mm
            table height over floor 780 mm
            table adjustable 120 mm
            ram surface 60 mm
            weight 0,3 t
            dimensions (WxDxH) 0,4 x 0,8 x 1,4 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with adjustable table, foot operation
            can be offered with or without putting into operation
          used Presses Pneumatic Press BURGER DO 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24047 · Pneumatic Press

          BURGER - DO 5 - - -

          Technical details

          used Presses Pneumatic Press BURGER DO 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24046 · Pneumatic Press

          BURGER - DO 5 - - -

          Technical details

          used Presses Pneumatic Press DUNKES DF 4


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-23133 · Pneumatic Press

          DUNKES - DF 4 - - 1984 -

          Technical details

          Pneumatic hand operated C-frame press with micrometer screw as a depth stop and sensitive handle for operation. This press is suitable for mounting work and straightening work.
            Description :
            Pneumatic hand operated C-frame press with micrometer screw as a depth stop and
            sensitive handle for operation. This press is suitable for mounting work and
            straightening work.
          used Presses Pneumatic Press DUNKES DF 4


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-23134 · Pneumatic Press

          DUNKES - DF 4 - - 1984 -

          Technical details

          Pneumatic hand operated C-frame press with micrometer screw as a depth stop and sensitive handle for operation. This press is suitable for mounting work and straightening work.
            Description :
            Pneumatic hand operated C-frame press with micrometer screw as a depth stop and
            sensitive handle for operation. This press is suitable for mounting work and
            straightening work.
          •   
          •   
          • 1  

            Profil de commerçant: Kirchgeorg Werkzeugmaschinen
          Ltd

          Contacter le commerçant



            Machines-outils Kirchgeorg
          Ltd

           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Allemagne
            0049-(0)-6103-9909-0">0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de

          Profil de commerçant


          Kirchgeorg Werkzeugmaschinen GmbH, l'un des plus anciens concessionnaires de machines-outils familiales et neuves en Allemagne, a été fondée à 1919 à Erfurt, en Thuringe par l'ingénieur Paul Kirchgeorg.

          Kirchgeorg a débuté en tant que représentant et revendeur de machines pour le travail du métal et du bois, et a rapidement transformé la société en un réviseur complet d’équipements lourds, ainsi qu’en concessionnaire de machines-outils et d’équipements d'occasion.

          À 1953, à la suite de tentatives d'expropriation du gouvernement est-allemand, Kirchgeorg a transféré la société à Fulda, dans le Hesse, en Allemagne de l'Ouest. Sous 1953 et 1960, ses fils, Harro et Reiner, l'ont rejoint, et l'entreprise est entrée dans une nouvelle phase d'expansion.

          En 1960, les premiers bâtiments ont été construits sur notre site actuel de Dreieich et ont depuis pris de l’ampleur pour inclure un sol d’exposition en mètres carrés 3,000 +. 

          Avec Thomas Kirchgeorg, ingénieur industriel, qui rejoint l'entreprise au sein de 2003, nous sommes heureux de dire que notre entreprise familiale en est à sa troisième génération. 

          Aujourd'hui, nous proposons plus de machines-outils 600 neuves et d'occasion exposées à Dreieich. En plus de la distribution mondiale, nous proposons des conseils personnalisés et personnalisés ainsi qu'un service complet. Nous pouvons également vous aider à obtenir un financement, un transport, une installation et des instructions.

          Dans nos installations de production, toutes les machines utilisées sont entièrement reconditionnées, soigneusement testées et assorties d’une garantie. Nous fabriquons également des pièces de rechange, des engrenages, des crémaillères et d’autres modules d’actionnement.

          Notre filiale, NASSOVIA Maschinenservice GmbH, assure le service après-vente agréé pour les machines d'électro-érosion à cavités Schiess-Nassovia depuis 1992.

          Nous sommes membre de l'Association allemande des grossistes en machines et machines-outils (FDM).

          Notre entrepôt 3000 sqm

          Nous sommes plus qu'heureux de vous aider avec toutes vos questions. Nous avons hâte d'avoir de tes nouvelles. 
           

          Gestion

          Téléphone
          Thomas Kirchgeorg+49 (6103) 9909-23

          Ventes

          Téléphone
          Norbert Dick+49 (6103) 9909-14

          Direction des ventes de production

          Téléphone
          Matthias Goy+49 (6103) 9909-27

          Techn. De production la gestion

          Téléphone
          Gerd Brandt+49 (6103) 9909-17

          Services

          Téléphone
          Maria Kelbler+49 (6103) 9909-18

          Réception

          Téléphone
          André Milbradt+49 (6103) 9909-0

          Webmaster
          Thomas Kirchgeorg

          NASSOVIA Machine Service GmbH

          Téléphone
          Hans Becker+ 49 (6103) 322693
          KIRCHGEORG
          Machine Tools GmbH

          Frankfurterstrasse 141
          D-63303 Dreieich

          Téléphone + 49 (6103) 9909-0
          Fax + 49 (6103) 9909-50
          E-mail  info@kirchgeorg.de

          Heures de travail:
          Du lundi au jeudi 7.30-16.30 CET
          Vendredi 7.30-15.30 CET




          Kirchgeorg Werkzeugmaschinen GmbH  63303 - Dreieich-Sprendlingen Frankfurter Straße 141 Deutschland
          Kirchgeorg Werkzeugmaschinen GmbH

          Frankfurter Straße 141



          Contact Trader


            Kirchgeorg Werkzeugmaschinen GmbH
           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Deutschland
            0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de
            Contact person:
          Sehr geehrter Herr Thomas Kirchgeorg 0049-(0)-6103-9909-23
          Sehr geehrter Herr Norbert Dick 0049-(0)-6103-9909-14

           




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannwinkel · Ausdrehkopf · Ausklinkmaschine · Auswuchtmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohrautomat · Bohrerschleifmaschine · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge · Dornrohrbiegemaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Eckverbindungsmaschinen · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Futter · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Hebegeräte · Hydraulische - Tafelschere · Hydraulische Presse · Härteofen · Kaltkreissäge · Kolbenkompressor · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Leit- und Zugspindeldrehmaschine · Lötanlage · Magnetspannplatte · Mechanikerdrehbank · Nutenziehmaschine · Planscheibe · Plasmaschneidegerät · Profil- Ring- Biegemaschine · Profilprojektor · Radialbohrmaschine · Richtplatte · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundtisch · Räummaschine - Innen - Vertikal · Sandstrahlanlage · Schleifbock · Schraubenkompressor · Schraubstock · Schutzgasschweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Senkerodiermaschine · Stangenlader · Staubabsaugung · Stoßmaschine - Vertikal · Stähleschleifmaschine · Säulenbohrmaschine · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Topfschleifmaschine · Tuschierpresse · Werkbank · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Würfeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnstangenfräser · Zahnstangenfräsmaschine · Zentrifuge · Zentrumschleifmaschine · Zubehör/Sonstiges ·