,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Single Column Press - Hydraulic

          Machinelist: Single Column Press - Hydraulic


          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic  40T - PHC - 750x700


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18421 · Single Column Press - Hydraulic

          - 40T - PHC - 750x700 - - 2018 -

          Technical details

          - SPS control Siemens Siematic Touch - oil cooling electrical - Oil tank - Table with T-slots (DIN 650-22) - Hydraulics Bosch-Rexroth - Light barriers from Schmersal - Two-hand operation - Pressure, speed, travel adjustable via monitor control - CE mark - Warranty 24 months (in single shift operation)
            Description :
            - SPS control Siemens Siematic Touch
            - oil cooling electrical
            - Oil tank
            - Table with T-slots (DIN 650-22)
            - Hydraulics Bosch-Rexroth
            - Light barriers from Schmersal
            - Two-hand operation
            - Pressure, speed, travel adjustable via monitor control
            - CE mark
            - Warranty 24 months (in single shift operation)
          used Presses Single Column Press - Hydraulic ALPHATEC CP 60


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6547 · Single Column Press - Hydraulic

          ALPHATEC - CP 60 - - 2001 -

          Technical details

          used Presses Single Column Press - Hydraulic BECKER & VAN HUELLEN OK 10/224


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11156 · Single Column Press - Hydraulic

          BECKER & VAN HUELLEN - OK 10/224 - - 1964 -

          Technical details
          pressure 10 t︱throat 235 mm︱stroke ca. 400 mm︱stroke speed - idle stroke downwards 4,5 m/min︱stroke speed - idle stroke upwards 10 m/min︱dayligth ca. 500/600 mm︱table-size ca. 450 x 400 mm︱ram hole 32 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 0,95 x 0,45 x 2,1 m︱Electric 380 Volt ︱With elect. two-hand control through ︱separate console ︱Condition: ready for operation ︱Condition: geometric overhauled ︱Video available on our website.
          Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².
            pressure 10 t
            throat 235 mm
            stroke ca. 400 mm
            stroke speed - idle stroke downw. 4,5 m/min
            stroke speed - idle stroke upwar. 10 m/min
            dayligth ca. 500/600 mm
            table-size ca. 450 x 400 mm
            ram hole 32 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 0,95 x 0,45 x 2,1 m
            Description :
            Hydraulic single-column press - from a training workshop, no guarantee on UVV,
            with two-hand control via separate control panel.
            Work only with safe tools or solid shields! Machine only works in full stroke,
            the stroke limiter of the ram cannot be regulated because the adjustment chain
            needs to be repaired, so it is sold at a special price.
            Machine dealer with own stock of 1600 m².
          used Presses Single Column Press - Hydraulic BRUNNHUBER HEP 80 S


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-23130 · Single Column Press - Hydraulic

          BRUNNHUBER - HEP 80 S - - 1970 -

          Technical details

          used Presses Single Column Press - Hydraulic Carl Müller GmbH & Co., Soling EPR/RH 45


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0159 · Single Column Press - Hydraulic

          Carl Müller GmbH & Co., Soling - EPR/RH 45 - - 1999 -

          Technical details

          used Presses Single Column Press - Hydraulic Carl Müller GmbH & Co., Soling EPR/RH 45


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0160 · Single Column Press - Hydraulic

          Carl Müller GmbH & Co., Soling - EPR/RH 45 - - 1989 -

          Technical details

          used Presses Single Column Press - Hydraulic DUNKES ESPZ 63/28


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-846 · Single Column Press - Hydraulic

          DUNKES - ESPZ 63/28 - - 1977 -

          Technical details
          pressure 63 t︱stroke 650 mm︱throat 380 mm︱table surface area 650 x 1000 mm︱ram surface 650 x 1000 mm︱dayligth 850 mm︱die cushion stroke 220 mm︱die cushion area 500 x 520 mm︱die cushion capacity 25 t︱ram stroke speed - under load Vorlauf 400 mm/sec︱ram stroke speed Rücklauf 330 mm/sec︱drawing speed Auf 220 mm/sec︱drawing speed Ab 300 mm/sec︱working height (floor - top of table) 1050 mm︱total power requirement 18,5 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 1,2 x 2,2 x 3,6 m︱
          - die cushion
            pressure 63 t
            stroke 650 mm
            throat 380 mm
            table surface area 650 x 1000 mm
            ram surface 650 x 1000 mm
            dayligth 850 mm
            die cushion stroke 220 mm
            die cushion area 500 x 520 mm
            die cushion capacity 25 t
            ram stroke speed - under load Vorlauf 400 mm/sec
            ram stroke speed Rücklauf 330 mm/sec
            drawing speed Auf 220 mm/sec
            drawing speed Ab 300 mm/sec
            working height (floor - top of t. 1050 mm
            total power requirement 18,5 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 1,2 x 2,2 x 3,6 m
            Description :
            - die cushion
          used Presses Single Column Press - Hydraulic DUNKES HD 10


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-62047 · Single Column Press - Hydraulic

          DUNKES - HD 10 - - 1993 -

          Technical details
          pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱
          D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)
            pressure 10 t
            stroke 400 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6500 t
            Description :
            D U N K E S (Germany)
            CNC Controlled Hydraulic Double Column Press
            Model HD 10
            Year 1993
            ________________________________________________________

            Pressure 10 tons
            Ram stroke 400 mm
            Mounting height 600 mm

            Table size 400 x 300 mm
            Table height above floor 820 mm
            Ram area 400 x 300 mm
            Ram bore 40 mm

            Quickspeed, downwards, max. 70 mm/s
            Working speed, downwards, using max. pressure 40 mm/s
            Working speed, min. 5 mm/s
            Working speed adjustable from 5 - 70 mm/s
            Return stroke speed, min./max. 20 / 175 mm/s

            Drive 7.5 kW
            Total electrical load, approx. 12 kW - 380 V - 50 Hz
            Weight, approx. 6,500 kg

            Accessories / Special Features
            * DUNKES CNC Control, Model 200, can be programmed with
            presettable parameters, e.g. Stroke, speed, forward and
            return motion, pressing time, etc.
            * Separate switch cabinet with floppy disk input.
            * Pendant control with monitor.
            * Two-handed release, in conjunction with pneumatic safety door.
            * A turning device for calibrating and smoothing of bores is
            mounted on the ram. (Calibrating mandrel moves into the bore
            and rotates, powered by it own motor-driven timer. Repetitions
            are controlled by stroke counter.)
          used Presses Single Column Press - Hydraulic DUNKES HEZ 100


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-977 · Single Column Press - Hydraulic

          DUNKES - HEZ 100 - - 1985 -

          Technical details

          used Presses Single Column Press - Hydraulic DUNKES HZ 10 (UVV)


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-97659 · Single Column Press - Hydraulic

          DUNKES - HZ 10 (UVV) - - 1993 -

          Technical details

          •   
          •   
          • 1  

            Profil de commerçant: Feyen Maschinen GmbH

          Contacter le commerçant



            Feyen GmbH
           Gelleperstr. 10
            Agence-street-marketing krefeld.47809
            Allemagne
            0049 (0)2151/5267-0">0049 (0)2151/5267-0
            0049 (0)2151/5267-39
            info@feyen.de
            www.feyen.de

          Profil de commerçant

          À PROPOS DE NOUS L'ENTREPRISE

          La société FEYEN Maschinen GmbH est spécialisée dans les machines-outils neuves et d’occasion, les machines textiles et les produits industriels. Nous sommes spécialisés dans les machines-outils pour la coupe du métal et le traitement des métaux non coupants, ainsi que dans les machines textiles pour la finition des tissus tissés et tricotés.

          Nous concevons également des machines spéciales et individuelles à ces fins selon les spécifications du client dans notre usine de construction de machines. La remise à neuf et la modernisation de machines et d'installations d'occasion ainsi que le démontage et le réassemblage font également partie de notre gamme de services.

          Grâce à l’accès à une vaste base de données de grandes entreprises allemandes et européennes de négoce de machines, nous sommes en mesure de proposer environ 10,000 des machines d'occasion

          Nous avons des entrepôts modernes 3 avec un espace de stockage totalement 3 700 m² avec une capacité de grue de tonnes 10 et 2 x 16. Environ. Les machines modernes 400 sont disponibles directement en stock ou sur site.

          Nous apprécierions vraiment votre visite. Notre entrepôt est ouvert tous les jours du lundi au vendredi de 13h à 18h et les samedis sur rendez-vous.


          Nous sommes revendeur agréé de… 

          NOTRE PROGRAMME DE LIVRAISON

          Notre domaine principal sont les machines utilisées telles que: 

          Scie circulaire en aluminium Fraiseuse automatique Band Saw - Automatique - Horizontal Scie à ruban - horizontaleBroyeur à courroie Machine de meulage de ceinture Perceuse à banc Centre de tour Cisaille circulaire Scie circulaire à froid Fraiseuse à copier Fraiseuse à copie verticale Rectifieuse Vilebrequin Couper à Lenth-cisaillement Rectifieuse cylindrique - UniverselDouble broche montée dans des journaux Broyeur de forage Forage et fraisage M / C Tour de face Perceuse à bridesPlieuse Cisaille à levier manuel Presse à la mouche à main Tour robuste Hydr. Pressbrake Machine de meulage interne et de visage Machine d'alésage de gabarit Machine d'ébavurage - Double colonne Machine de meulage de gabarit Fraiseuse à clé à clé - VerticalMachine à clé Fraiseuse à genouillères - univ. Tour à cycle contrôlé Centre d'usinage - Horizontal Centre d'usinage - Universel Tour de mécanique Fraiseuse - Vertical Machine à enrouler Perceuse à pilules Machine à cintrer les plateaux - Rouleaux 3 Machine à cintrer les plateaux - Rouleaux 3 Cisaille à plaques - Hydraulique Unité de revêtement de poudre Machine à cintrer le profilMachine de soudage à gaz de protection Perceuse radiale Machine de forage radial rapide Reboring Machine Reboring MachineRouleau à anneaux machine de rivetage Table de soudure rotative - Surface arrondie Section Steel Shear Machine à façonner Presse à colonne simple - Hydraulique Spot Machine de soudure Machine d'estampage et de poinçonnage Rectifieuse plane - Horizontal Type de table Fraiseuse et fraiseuse Machine de coupe de filetage Preset d'outil Fraiseuse d outilleur - universelle Presse d'essai - hydraulique Machine à meuler l'outil de tournage Fraiseuse universelle Souffleur de bobine à vide Tour de tourelle verticale - Colonne unique Unité de tournage de navires Transformateur de soudage


          applicator Enrouleur de lots (Sochor) Station d'habitation Dye Padder Gamme de teinture Embossage-Calandre Mangle de finition Giguelaboratoire padder Application de boissons alcoolisées essoreuse à rouleaux Laveuse à largeur ouverte Romer Steamer Roller Vat - vert. Rolling Calandre Pièces de rechangeSqueezing Mangle calendrier thermocollage aspiration sous vide La lessive Lave-Range


          Vous recherchez une machine d'occasion? Nous serions heureux de vous aider à fournir les éléments suivants:

          Centres d'usinage, tours à commande numérique, tour moteur / tour centre, fraiseuses d'outillage, rectifieuses cylindriques…

          Nos machines d'occasion sont fabriquées à partir de fabricants renommés, tels que:

          DECKEL-MAHO, GILDEMEISTER, BRIGHTER, STARRAG, HERMLE, MIKRON, HEYLIGENSTAEDT, WFL, MAKINO, MAZAK, WEILER, HULLER-HILLE, SORALUCE, SCHAUDT, FORTUNA, EMAG, VAG, VEN, BOEINGINGER, BEHRINGER, TOS, etc.

          Hallen

          Bureau et entrepôt 
          Feyen GmbH
          Rue Gelleper 10
          47809 Krefeld

          Contact
          M. Dieter Feyen
          M. Thomas Feyen

           +49 (0) 2151/5267-0 
           +49 (0) 2151/5267-39

           info@feyen.de




          Feyen Maschinen GmbH   47809 - Krefeld Gelleperstr. 10 Deutschland
          Feyen Maschinen GmbH

          Gelleperstr. 10



          Contact Trader


            Feyen Maschinen GmbH
           Gelleperstr. 10
            47809 - Krefeld
            Deutschland
            0049 (0)2151/5267-0
            0049 (0)2151/5267-39
            info@feyen.de
            www.feyen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Alu-Kreissäge · Anreißplatte · Antragswerk · Appreturfoulard · Aufspannwinkel · Ausbohrbank · Ausbohrmaschine · Ausklinkmaschine · Bandschleifmaschine · Bandschleifmaschinen · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bohrkopf · Bohrwerkstisch · Bohrwürfeltisch · Breitwaschmaschine · Brückenstanze hydraulisch · Crush-Maschine · Doppelschleifbock · Einstellgerät · Elektrofahrzeug · Ersatzteile · Fixatoren · Flachschleifmaschine - Horizontal · Flottenauftragsgerät · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Färbeanlage · Färbefoulard · Gabelhubwagen - Elektro · Gewindeschneidmaschine · Handspindelpresse · Hochleistungsquetschwerk · Jigger · Kaltkreissäge · Konsolfräsmaschine - universal · Koordinatenbohrmaschine · Koordinatenschleifmaschine · Kopierfräsmaschine · Kopierfräsmaschine - vertikal · Kreiselpumpe · Kreisteiltisch · Laborfoulard · Labortrockner · Leit- und Zugspindeldrehmaschine · Lochstanze · LuZ · Mechanikerdrehbank · Messplatte · Motor · Neigungswaage · Nietmaschine · Nutenziehmaschine · Pneumatische Presse · Profil- Ring- Biegemaschine · Profilstahlschere · Punktschweißmaschine · Querteilschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Roll-Kalander · Rollenbahn - Längenanschlag · Rollendämpfer · Rollenkufe-vertikal · Rundtisch · Rundwalzmaschine · Rührwerk · Sandstrahlanlage · Schnellradialbohrmaschine · Schraubstock · Schweißdrehtisch - rund · Schweißplatte · Schwenkbiegemaschine · Schwerdrehmaschine · Signiermaschine · Stangenzuführung · Starrbettfräsmaschine · Staubabsaugung · Stromaggregat · Stähleschleifmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Thermobonding-Kalander · Tischbohrmaschine · Tischbohrwerk · Traktor · Vacuum-Absauganlage · Vertikal - Honmaschine - Innen · Verweilstation · Waage · Warenspeicher · Waschanlage · Waschkufe · Wasserrückkühlanlage · Werkstattpresse - hydraulisch · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Zwischenquetschwerk ·