,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column HELMERDING ERVL 50 B


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-943 · Eccentric Press - Single Column

          HELMERDING - ERVL 50 B - - überholt 2023/24 -

          Technical details
          pressure 50 t︱throat 245 mm︱stroke 14 / 90 mm︱ram adjustment 75 mm︱table height adjustment 150 mm︱strokes per minute 42/85 ︱table surface area 700 x 490 mm︱ram surface 400 x 230 mm︱tool hole in ram 40 mm︱total power requirement 4 kW︱weight of the machine ca. 3,41 t︱dimensions of the machine ca. 0,8 x 1,75 x 2,1 m︱
          Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work
            pressure 50 t
            throat 245 mm
            stroke 14 / 90 mm
            ram adjustment 75 mm
            table height adjustment 150 mm
            strokes per minute 42/85
            table surface area 700 x 490 mm
            ram surface 400 x 230 mm
            tool hole in ram 40 mm
            total power requirement 4 kW
            weight of the machine ca. 3,41 t
            dimensions of the machine ca. 0,8 x 1,75 x 2,1 m
            Description :
            Machine is partially overhauled in our house as follows:
            - Cleaning and inspection
            - new control cabinet with safety control and touchscreen display
            - new 2-hand control panel
            - Current UVV test with braking time measurement
            - Machine safe for hand inlay work


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 80


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-872 · Eccentric Press - Single Column

          WEINGARTEN - ARP 80 - - überholt 2023/24 -

          Technical details
          pressure 80 t︱throat 320 mm︱stroke 8 - 112 mm︱table surface area 830 x 600 mm︱no. of strokes 30 - 85 Hub/min︱ram surface 650 x 400 mm︱ram adjustment 71 mm︱clamping plate 990 x 550 mm︱table height over floor 810 mm︱table height over floor 800 mm︱column daylight (vorn) 680 mm︱column daylight (hinten) 520 mm︱total power requirement 7,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 1,5 x 2,2 x 3,15 m︱
          Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm The machine should be partially overhauled - Complete disassembly and review - new coloring - new control cabinet with PLC and touchscreen including cabling.
            pressure 80 t
            throat 320 mm
            stroke 8 - 112 mm
            table surface area 830 x 600 mm
            no. of strokes 30 - 85 Hub/min
            ram surface 650 x 400 mm
            ram adjustment 71 mm
            clamping plate 990 x 550 mm
            table height over floor 810 mm
            table height over floor 800 mm
            column daylight (vorn) 680 mm
            column daylight (hinten) 520 mm
            total power requirement 7,5 kW
            weight of the machine ca. 7,7 t
            dimensions of the machine ca. 1,5 x 2,2 x 3,15 m
            Description :
            Equipment:
            - with wheel presentation
            - fixed table
            - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm

            The machine should be partially overhauled
            - Complete disassembly and review
            - new coloring
            - new control cabinet with PLC and touchscreen including cabling.



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column ERFURT PEE I 400


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-970 · Eccentric Press - Single Column

          ERFURT - PEE I 400 - - unbekannt -

          Technical details
          pressure 400 t︱throat 400 mm︱stroke 40 - 140 mm︱number of strokes - idle run 32 min-1︱ram adjustment 125 mm︱table surface area 1250 x 750 mm︱dayligth min/max 450/590 mm︱total power requirement 31,5 kW︱weight of the machine ca. 23 t︱Overall size 3,7 x 1,7 x 3,9 mm︱
            pressure 400 t
            throat 400 mm
            stroke 40 - 140 mm
            number of strokes - idle run 32 min-1
            ram adjustment 125 mm
            table surface area 1250 x 750 mm
            dayligth min/max 450/590 mm
            total power requirement 31,5 kW
            weight of the machine ca. 23 t
            Overall size 3,7 x 1,7 x 3,9 mm


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column ZEULENRODA PED 63/2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-981 · Eccentric Press - Single Column

          ZEULENRODA - PED 63/2 - - unbekannt -

          Technical details
          pressure 63 t︱throat 315 mm︱stroke 16 - 125 mm︱max. distance table - ram 417 mm︱ram adjustment 70 mm︱no. of strokes 80 Hub/min︱table surface area 800 x 630 mm︱ram surface 500 x 400 mm︱total power requirement 6 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,5 x 2,2 x 2,75 m︱
            pressure 63 t
            throat 315 mm
            stroke 16 - 125 mm
            max. distance table - ram 417 mm
            ram adjustment 70 mm
            no. of strokes 80 Hub/min
            table surface area 800 x 630 mm
            ram surface 500 x 400 mm
            total power requirement 6 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1,5 x 2,2 x 2,75 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU 25


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4929 · Eccentric Press - Single Column

          EBU - 25 - - unbekannt -

          Technical details
          pressure 25 t︱throat - mm︱stroke - mm︱total power requirement - kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2 x 2 x 2,4 m︱
            pressure 25 t
            throat - mm
            stroke - mm
            total power requirement - kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2 x 2 x 2,4 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HEL - WITA ERN 125


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-1000 · Eccentric Press - Single Column

          HEL - WITA - ERN 125 - - NEU -

          Technical details
          pressure 125 t︱throat 360 mm︱stroke 20 - 130 mm︱table surface area 920 x 690 mm︱ram surface 580 x 400 mm︱no. of strokes 60 Hub/min︱ram adjustment 80 mm︱hole in the table 200 mm︱tool hole in ram 50 mm︱daylight (stroke down, ram adjustment above) 500 mm︱total power requirement 11 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. B 1,32 x T 1,8 x H 2,82 m︱
            pressure 125 t
            throat 360 mm
            stroke 20 - 130 mm
            table surface area 920 x 690 mm
            ram surface 580 x 400 mm
            no. of strokes 60 Hub/min
            ram adjustment 80 mm
            hole in the table 200 mm
            tool hole in ram 50 mm
            daylight (stroke down, ram adjus. 500 mm
            total power requirement 11 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. B 1,32 x T 1,8 x H 2,82 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.4


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-287 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.4 - - Neu -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 290 x 210 mm︱ram hole 40 H7 mm︱hole in the table 220 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 290 x 210 mm
            ram hole 40 H7 mm
            hole in the table 220 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.3


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-286 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.3 - - Neu -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 290 x 210 mm︱ram hole 40 H7 mm︱hole in the table 220 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 290 x 210 mm
            ram hole 40 H7 mm
            hole in the table 220 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 40.2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-255 · Eccentric Press - Single Column

          AMBOLD - PEEV 40.2 - - GÜ 2024 -

          Technical details
          pressure 40 t︱throat 225 mm︱stroke 8 - 84 mm︱table surface area 580 x 450 mm︱ram adjustment 55 mm︱no. of strokes 130 Hub/min︱ram surface 185 x 180 mm︱ram hole 40 mm︱hole in the table 210 x 170 mm︱clamping plate 570 x 450 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 1,4 x 1,1 x 2,1 m︱
          Single Column press with - pneumatic clutch - cam control Balluff - electrical cabinet with touchscreen control - arabic language on display and electrical cabinet - foot control - central lubrication - bolster plate
            pressure 40 t
            throat 225 mm
            stroke 8 - 84 mm
            table surface area 580 x 450 mm
            ram adjustment 55 mm
            no. of strokes 130 Hub/min
            ram surface 185 x 180 mm
            ram hole 40 mm
            hole in the table 210 x 170 mm
            clamping plate 570 x 450 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 1,4 x 1,1 x 2,1 m
            Description :
            Single Column press with
            - pneumatic clutch
            - cam control Balluff
            - electrical cabinet with touchscreen control
            - arabic language on display and electrical cabinet
            - foot control
            - central lubrication
            - bolster plate


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 25.2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-251 · Eccentric Press - Single Column

          AMBOLD - PEEV 25.2 - - GÜ 2024 -

          Technical details
          pressure 25 t︱throat 200 mm︱stroke 4 - 80 mm︱table surface area 520 x 400 mm︱force Dauerlauf 1765 J ︱no. of strokes 160 Hub/min︱dayligth 302 max mm︱dayligth 100 min mm︱adjustment of stroke 8-84 mm︱ram adjustment 55 mm︱ram surface 185 x 180 mm︱ram hole 40 H7 mm︱force 3530 J ︱hole in the table 210 x 170 mm︱width of T-slots 22 mm︱connected load 3,5 kW︱rated current 9 ︱frequency 50 Hz︱voltage 380 V︱weight of the machine ca. 2700 kg︱
            pressure 25 t
            throat 200 mm
            stroke 4 - 80 mm
            table surface area 520 x 400 mm
            force Dauerlauf 1765 J
            no. of strokes 160 Hub/min
            dayligth 302 max mm
            dayligth 100 min mm
            adjustment of stroke 8-84 mm
            ram adjustment 55 mm
            ram surface 185 x 180 mm
            ram hole 40 H7 mm
            force 3530 J
            hole in the table 210 x 170 mm
            width of T-slots 22 mm
            connected load 3,5 kW
            rated current 9
            frequency 50 Hz
            voltage 380 V
            weight of the machine ca. 2700 kg


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD EERH 100


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-984 · Eccentric Press - Single Column

          AMBOLD - EERH 100 - - GÜ 2024 -

          Technical details
          pressure 100 t︱throat 350 mm︱stroke 20 - 120 mm︱table size 1100 x 700 mm︱ram head dimension 750 x 450 mm︱ram adjustment max. 90 mm︱no. of strokes 70 Hub/min︱strokes - infinitely variable 20 - 120 Hub/min︱daylight, max. stroke above - ram adjustment above 500 mm︱hole in the table 400 x 300 mm︱hole in bolster plate 220 x 180 mm︱Breakthrough in column back 450 x 300 mm︱total power requirement 11 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 2,1 x 1,3 x 2,8 m︱
            pressure 100 t
            throat 350 mm
            stroke 20 - 120 mm
            table size 1100 x 700 mm
            ram head dimension 750 x 450 mm
            ram adjustment max. 90 mm
            no. of strokes 70 Hub/min
            strokes - infinitely variable 20 - 120 Hub/min
            daylight, max. stroke above - ra. 500 mm
            hole in the table 400 x 300 mm
            hole in bolster plate 220 x 180 mm
            Breakthrough in column back 450 x 300 mm
            total power requirement 11 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 2,1 x 1,3 x 2,8 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER PDR 200/450


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233008 · Eccentric Press - Single Column

          SCHULER - PDR 200/450 - - 2009 - Siemens S 7

          Technical details
          pressure 200 t︱stroke 30 - 140 mm︱no. of strokes 40 /min︱throat 450 mm︱passage to the back 425 mm︱dayligth 630 mm︱table surface area 1020 x 880 mm︱hole in the table 540 / 500 mm︱table height over floor 800 mm︱ram surface 800 x 500 mm︱ram adjustment 125 mm︱power requirement 15,0 kW︱Weight 13,8 t︱dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m︱
          year of manufacture 1970 2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation
            pressure 200 t
            stroke 30 - 140 mm
            no. of strokes 40 /min
            throat 450 mm
            passage to the back 425 mm
            dayligth 630 mm
            table surface area 1020 x 880 mm
            hole in the table 540 / 500 mm
            table height over floor 800 mm
            ram surface 800 x 500 mm
            ram adjustment 125 mm
            power requirement 15,0 kW
            Weight 13,8 t
            dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m
            Description :
            year of manufacture 1970
            2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU H 80 RiV


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-963 · Eccentric Press - Single Column

          EBU - H 80 RiV - - 2008 -

          Technical details
          pressure 80 t︱throat 305 mm︱stroke 8 - 140 mm︱ram adjustment 100 mm︱no. of strokes 60 Hub/min︱table surface area 900 x 625 mm︱ram surface 600 x 280 mm︱daylight, max. stroke above - ram adjustment above 345 mm︱table height adjustment 240 mm︱ram hole Dm. 40 mm︱total power requirement 14 A︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. BxTxH 1,38 x 2,1 x 2,56 m︱
          - hydraulic clutch - belt transmission - mechanical overload protection (breaking plate) - connecting rod clamping manually - ram height adjustment manually - stroke adjustment manually - OT correction manually - table height adjustment manually - automatic central lubrication, made by Beka - clamping plate Machine is technically checked in our company. - Current UVV test with braking time measurement
            pressure 80 t
            throat 305 mm
            stroke 8 - 140 mm
            ram adjustment 100 mm
            no. of strokes 60 Hub/min
            table surface area 900 x 625 mm
            ram surface 600 x 280 mm
            daylight, max. stroke above - ra. 345 mm
            table height adjustment 240 mm
            ram hole Dm. 40 mm
            total power requirement 14 A
            weight of the machine ca. 7,6 t
            dimensions of the machine ca. BxTxH 1,38 x 2,1 x 2,56 m
            Description :
            - hydraulic clutch
            - belt transmission
            - mechanical overload protection (breaking plate)
            - connecting rod clamping manually
            - ram height adjustment manually
            - stroke adjustment manually
            - OT correction manually
            - table height adjustment manually
            - automatic central lubrication, made by Beka
            - clamping plate

            Machine is technically checked in our company.

            - Current UVV test with braking time measurement


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.3


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-910 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.3 - - 2004 -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 195 x 210 mm︱ram hole 40 H7 mm︱hole in the table 250 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 195 x 210 mm
            ram hole 40 H7 mm
            hole in the table 250 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU H 40


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0456 · Eccentric Press - Single Column

          EBU - H 40 - - 2004 -

          Technical details
          Capacity 40 t︱Throat depth 225 mm︱Slide adjustment 85 mm︱Shut height (stroke down, adjustment up) 375 mm︱Table surface area 640 x 450 mm︱Number of strokes 130 min-1︱Dimensions L x W x H 1200 x 1680 x 2160 mm︱Weight of machine approx. 3,1 t︱
            Capacity 40 t
            Throat depth 225 mm
            Slide adjustment 85 mm
            Shut height (stroke down, adjust. 375 mm
            Table surface area 640 x 450 mm
            Number of strokes 130 min-1
            Dimensions L x W x H 1200 x 1680 x 2160 mm
            Weight of machine approx. 3,1 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •