,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Tool Grinder - Universal

          Machinelist: Tool Grinder - Universal


          Tool Grinder - Universal

          used Machine tools grinding machines Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04654 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2016 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!


            2016 S25 003004

            400 V, 50/60 Hz, with CEE plug and cable

            Color: light gray

            motorized height adjustment, axial grinding spindle adjustment

            Equipment:

            * Opto-electronic measuring device with measuring electronics
            Image processing, PC (Original ISOG)
            * CCD camera and monitor
            * Dividing head Sk 40 with dividing disk 24 R
            * 1 dividing disk each 14, 16, 18
            * Tightening screw M 16
            * Counter bearing complete with 4 center punch points
            * Center point Sk 40 with driver
            * Twist-u. Relief grinding device with rack housing
            * Dust extraction completely without vacuum cleaner
            * LED machine light
            * Tooth support complete with support and sliding blades
            * Setting gauge
            * Universal setting gauge
            * Handwheel facility
            * Dressing device with 3 diamonds
            * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising
            * Pliers sleeve and extraction nut and key
            * 10 pieces of direct collets Sk 40 6 - 25 mm
            * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * Clamping nut
            * 12 grinding wheel chucks
            * Tool cabinet with shelves
            * 2 protective hoods
            * various diamond / borazon discs

            * Operating instructions and key, spare parts list, circuit diagram
            * Set of technical grinding instructions

            ##### Machine is partially overhauled and has an electrical acceptance
            report!#####
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04715 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2011 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for Decken S 11 machines in stock!!! DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking 400 V, 50 Hz, with CEE plug and cable #2385 Color white Motorized height adjustment, axial grinding spindle adjustment * Machine stand milled + ground, new carrier plate Basic equipment: - including Waldmann LED light - including dust extraction completely without a vacuum cleaner - including protective cover for grinding wheels up to Ø 125 mm - incl. set of technical information - including grinding wheel holder 51 mm - Includes set of suspension devices for transport - including 5 adjusting screws Accesories: * Universal dividing head SK 40 with dividing disk 24 R and mounting points for optics * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * Machine and accessories partially overhauled and with electrical acceptance report We would be happy to trade in your used Deckel S 11 - talk to us! !!! Accessories can be varied as desired!!!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for Decken S 11 machines in stock!!!

            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking

            400 V, 50 Hz, with CEE plug and cable

            #2385

            Color white

            Motorized height adjustment, axial grinding spindle adjustment


            * Machine stand milled + ground, new carrier plate


            Basic equipment:

            - including Waldmann LED light
            - including dust extraction completely without a vacuum cleaner
            - including protective cover for grinding wheels up to Ø 125 mm
            - incl. set of technical information
            - including grinding wheel holder 51 mm
            - Includes set of suspension devices for transport
            - including 5 adjusting screws


            Accesories:

            * Universal dividing head SK 40 with dividing disk 24 R and
            mounting points for optics


            * Operating key, operating instructions, spare parts list, circuit diagram
            * technical grinding instructions
            * Machine and accessories partially overhauled and
            with electrical acceptance report


            We would be happy to trade in your used Deckel S 11 - talk to us!

            !!! Accessories can be varied as desired!!!
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04679 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!

            2189

            400 V, 50 Hz, with CEE plug and cable

            Colour: body pastel turquoise RAL 6034
            Stand blue-grey RAL 7031

            Motorized height adjustment, axial grinding spindle adjustment

            Machine like new !!

            * Accesories:

            * Sk ??40 dividing head with 24 R dividing disc
            * Graduated disc 20 R
            * Tightening screw M 16 69871
            * Spiral and relief grinding device with rack housing
            * Counter bearing with 4 tailstock centres
            * Center point with driver
            * Dressing device
            * Dressing diamond
            * Radius grinding device SK 40 complete with setting gauge
            * Steel holder for ditto
            * Support fingers with sliding blades
            * Support finger holder
            * Complete dust extraction without suction
            * Halogen light
            * Tooth support complete
            * Setting gauge
            * Plier sleeve and jacking nut and wrench
            * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm
            * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm
            * 6 jaw grinding chuck
            * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * clamping nut
            * 20 grinding wheel chucks
            * 2 protective hoods
            * various diamond/borazon discs

            * Instruction Manual & Keys, Parts List, Wiring Diagram
            * Complete set of grinding instructions

            Machine is partially overhauled and with electrical acceptance report!


            !! Various measuring optics (new or used) with measuring cross
            sled available !!
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04706 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!


            2189

            400 V, 50 Hz, with CEE plug and cable

            Colour: body pastel turquoise RAL 6034
            Stand blue-grey RAL 7031

            Motorized height adjustment, axial grinding spindle adjustment

            Machine like new !!

            * Accesories:

            * Sk ??40 dividing head with 24 R dividing disc
            * Graduated disc 20 R
            * Tightening screw M 16 69871
            * Spiral and relief grinding device with rack housing
            * Counter bearing with 4 tailstock centres
            * Center point with driver
            * Dressing device
            * Dressing diamond
            * Radius grinding device SK 40 complete with setting gauge
            * Steel holder for ditto
            * Support fingers with sliding blades
            * Support finger holder
            * Complete dust extraction without suction
            * Halogen light
            * Tooth support complete
            * Setting gauge
            * Plier sleeve and jacking nut and wrench
            * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm
            * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm
            * 6 jaw grinding chuck
            * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * clamping nut
            * 20 grinding wheel chucks
            * 2 protective hoods
            * various diamond/borazon discs

            * Instruction Manual & Keys, Parts List, Wiring Diagram
            * Complete set of grinding instructions

            ##### Machine is partially overhauled and with electrical acceptance report!
            #####

            !! Various measuring optics (new or used) with measuring cross
            sled available !!
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal Deckel S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04719 · Tool Grinder - Universal

          Deckel - S11 - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱operating key and instruction ︱The machine can be viewed under current.
          DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 2178 / 02 380 V, 50 Hz, with CEE plug and cable !! Original paint !!! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics* * Dust extraction device without suction cup * Halogen lamp * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            Description :
            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL

            2178 / 02

            380 V, 50 Hz, with CEE plug and cable

            !! Original paint !!!

            ! Machine is in delivery condition, depending on customer request the machine
            can be overhauled !

            motorised height adjustment, axial grinding spindle adjustment

            Accessories:

            * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics*
            * Dust extraction device without suction cup
            * Halogen lamp
            * Protective cover
            * 3 pcs. transport lugs

            * 1 set of technical sanding instructions
            * Operating key, operating instructions, spare parts list, wiring diagram
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04404 · Tool Grinder - Universal

          DECKEL - S11 - - 1989 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!

            Notice:
            We would be happy to provide you with a free offer. However, please understand
            that we only accept inquiries with a complete address
            edit.


            1218
            400 V, 50 Hz, with CEE plug and cable

            Colour: light grey RAL 7035
            Stand traffic grey RAL 7042 (new paint)

            axial grinding spindle adjustment

            Accessories:

            * Machine stand and carrier plate ground

            * Complete electrical conversion included:

            > new three-phase drive
            > new brake motor
            > new frequency controller
            > new built-in electrics touch-proof
            > Fi circuit breaker
            > EMC cables and screwed connections
            > new protective cables
            > new control panel
            > Emergency stop switch

            * Opto electronic measuring device with microscope, support arm, parking space,
            new 2-axis Fagor digital readout and scales completely mounted and adjusted

            * dividing head Sk 40 with prisms and 24 R dividing disc
            * 1 graduated disc 14 + 22 R each
            * Twist and back-grinding device with rack and pinion housing
            * Setting gauge
            * Complete tooth support
            * pivoting support finger
            * LED lamp waldmann
            * Dust extraction device without vacuum cleaner
            * Univ. adjustment gauge
            * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm
            * Collet sleeve with forcing nut
            * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each
            * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4
            * 3 grinding wheel chuck L 48, 35 mm
            * Protective cover
            * Exchange grinding spindle
            * Tool cabinet with 4 drawers
            * Shelves for dto.
            * Operating key, operating instructions, spare parts list, circuit diagram

            * Machine and accessories completely overhauled and with electrical test
            certificate!*
            6 months warranty !
          Datasheet
          Request / Contact
          used Machine tools grinding machines Tool Grinder - Universal Deckel S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04718 · Tool Grinder - Universal

          Deckel - S11 - - 1984 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱operating key and instruction ︱The machine can be viewed under current.
          DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 380 V, 50 Hz Colour: green !!! Original paint !!! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics * Dust extraction device without suction cup * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            Description :
            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL

            465 / 84

            380 V, 50 Hz

            Colour: green !!! Original paint !!!

            ! Machine is in conditon from seller !

            motorised height adjustment, axial grinding spindle adjustment

            Accessories:

            * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics
            * Dust extraction device without suction cup
            * Protective cover
            * 3 pcs. transport lugs

            * 1 set of technical sanding instructions
            * Operating key, operating instructions, spare parts list, wiring diagram
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Schmeisser Werkzeugmaschinen

          Contacter le commerçant



            Schmeisser machines-outils
           Lochfelbenstrasse 2
            89312 - Guntzbourg
            Allemagne
            08221-3689630 "> 08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net

          Profil de commerçant

          Les machines-outils Schmeisser vous souhaitent la bienvenue.

          Laissez-nous vous inviter dans notre entreprise familiale, dans laquelle expérience, tradition et innovation créent une image d’entreprise cohérente.

           

          Nous sommes votre partenaire compétent et fiable dans le domaine des machines-outils de forage, de fraisage, de tournage et de meulage de haute qualité, qu’elles soient utilisées ou neuves, conventionnelles ou à commande numérique.

           

          Nos machines fonctionnent exactement comme nous: efficacement et avec précision. Une action responsable et consciencieuse envers nos partenaires commerciaux, nos collègues et notre environnement est notre priorité. L'équipe Schmeisser est synonyme de compétence, d'honnêteté et d'équité. Tout cela fait de nous un partenaire opérationnel mondial fort qui tient parole.

           

          Notre siège social de 2.300 m² situé à Guenzburg avec ses ateliers, entrepôts et espaces commerciaux avancés offre des conditions optimales pour répondre à toutes les exigences de la plus grande satisfaction de la clientèle. La pièce maîtresse est notre atelier principal avec plus de 500 m² et un système d’entrepôt grande hauteur 2.

           

          .Machines-outils d'occasion et neuves

          .Achat et vente

          .Compétent et complet et consultant n y compris les types de machines plus anciennes

          .Révision partielle et générale

          .Réparation, inspection et nettoyage

          .Pièces de rechange et maintenance

          .Equipement sur mesure de machines pour répondre à vos exigences

          .Service après vente et service

          .Traitement rapide et précis des affaires

          .Achat de parc complet de machines (par exemple en cas de liquidation d'entreprise)

          .Financements

          .Solutions de transport et réglages de la machine

          .Démonstration de la machine dans nos espaces commerciaux

          .Rapports d'essais électriques

          .Rechercher et trouver un service: nous trouverons votre machine-outil souhaitée

           

          Nous sommes impatients de vous rencontrer!

          Schmeisser machines-outils

          Propriétaire: Ralf Schmeisser

           

          Lochfelbenstrasse 2

          D - 89312 Guenzburg

          Fon + 49 (0) 8221 368 96 30

          Fax + 49 (0) 8221 368 96 32

          E-mail   





          A universal tool grinder serves a multitude of functions
          Optimize your performance with a used universal tool grinder

          Finding versatile equipment for your business can be tough but investing in a universal tool grinder is a smart move for any business owner. This machine offers a variety of grinding functions for various materials. From surface to cylindrical grinding a universal tool grinder does it all. Universal tool grinders are available in a wide variety of sizes and shapes making it easy to find one to suit your business needs. Look for an affordable used machine at LagerMaschinen and save yourself time and money.

          Experience versatility with a universal tool grinder

          Operating a universal tool grinder requires a high level of skill and precision. Whether you choose a manually operated model or a Computer Numerically Controlled (CNC) version you can find the best universal tool grinder to suit the needs of your business at LagerMaschinen. The sharpening of tool bits and milling cutters is just one of the many functions this machine can serve for you. Investing in a universal tool grinder will increase the productivity of your business.

          Buying used machinery is a smart move for your business

          Buying used machines doesn't necessarily require you to sacrifice quality. LagerMaschinen is your gateway to the best selection of lightly used machines for your business ensuring you can find the perfect universal tool grinder to suit all your needs. Whether you're looking for a universal tool grinder or any other piece of equipment you can find just what you need by using LagerMaschinen's user-friendly interface to search by model location or price. Show your business acumen by using LagerMaschinen for your next used machine purchase.

          Schmeisser Werkzeugmaschinen   89312 - Günzburg Lochfelbenstrasse 2 Deutschland
          Schmeisser Werkzeugmaschinen

          Lochfelbenstrasse 2



          Contact Trader


            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 - Günzburg
            Deutschland
            08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net
            Contact person:

           




          Machine category


          Bandsäge - horizontal · Bandsäge - Vertikal · Bohrerschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Leit- und Zugspindeldrehmaschine · Messsystem · Schleifbock · Staubabsaugung · Säulenbohrmaschine · Tischbohrmaschine · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Zubehör ·