,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Belt Grinding Machine

          Machinelist: Belt Grinding Machine


          Belt Grinding Machine

          used Grinding machines Belt Grinding Machine FALKEN FALKEN R 1


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7188 · Belt Grinding Machine

          FALKEN - FALKEN R 1 - - NEU -

          Technical details
          width of the strips 150 mm︱band length 2280 mm︱band speed 22 m/sec︱table-size 700 x 350 mm︱roll diameter 140 / 80 mm︱motor speeds: 2880 1/min︱range L-W-H 1300 x 800 x 1500 mm︱total power requirement 3,0 kW︱weight of the machine ca. 250 kg︱
          Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley
            width of the strips 150 mm
            band length 2280 mm
            band speed 22 m/sec
            table-size 700 x 350 mm
            roll diameter 140 / 80 mm
            motor speeds: 2880 1/min
            range L-W-H 1300 x 800 x 1500 mm
            total power requirement 3,0 kW
            weight of the machine ca. 250 kg
            Description :
            Horizontal belt grinder

            - Small, flexible all-rounder
            - Solid gray cast iron unit - long-lasting, good grinding results
            - Motorized tape oscillation approx. 10mm
            - Pneumatic belt tension
            - Small table on the pulley for grinding radii and shapes
            - The entire sanding belt can be used thanks to the height-adjustable work table
            - Including angle and miter fence

            Special equipment:
            - swiveling grinding unit 90 - 135 degrees
            - Support table on the pulley


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Belt Grinding Machine FALKEN R1 150x2280


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-823822 · Belt Grinding Machine

          FALKEN - R1 150x2280 - - -

          Technical details
          width of the strips 150 mm︱band length 2280 mm︱revolutions per minute 2880 U/min︱roll diameter 140 / 80 mm︱table-size 700 x 350 mm︱engine output 3,0 kW︱weight 250 kg︱range L-W-H 1300 x 800 x 1500 mm︱
          Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley
            width of the strips 150 mm
            band length 2280 mm
            revolutions per minute 2880 U/min
            roll diameter 140 / 80 mm
            table-size 700 x 350 mm
            engine output 3,0 kW
            weight 250 kg
            range L-W-H 1300 x 800 x 1500 mm
            Description :
            Furnishing :
            - Horizontal belt grinder
            - Small, flexible all-rounder
            - Solid gray cast iron unit - long-lasting, good grinding results
            - Motorized belt oscillation approx. 10 mm
            - Pneumatic belt tension
            - Small table on the pulley for grinding radii and shapes
            - The entire sanding belt can be used thanks to the height-adjustable work table
            - Including angle and miter fence

            Special equipment included:
            - swiveling grinding unit 90 - 135 degrees
            - Support table on the pulley


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Belt Grinding Machine FALKEN BT 114 S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-823833 · Belt Grinding Machine

          FALKEN - BT 114 S - - -

          Technical details
          width of the strips 50 mm︱band length 940 mm︱band speed 3 - 22 m/min︱turning speeds 1450 U/min︱tube diameter 16 - 114 mm︱radius 180 °︱total power requirement 4,75 kW︱weight of the machine ca. 265 kg.︱range L-W-H 1.000x750x1.300 mm︱
          Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity
            width of the strips 50 mm
            band length 940 mm
            band speed 3 - 22 m/min
            turning speeds 1450 U/min
            tube diameter 16 - 114 mm
            radius 180 °
            total power requirement 4,75 kW
            weight of the machine ca. 265 kg.
            range L-W-H 1.000x750x1.300 mm
            Description :
            Furnishing:
            - stationary pipe belt grinders
            - Automatic material feed with separate drive motor
            - Replacement sanding belts
            - Stepless speed adjustment
            - Manual adjustment of tube tension
            - Polish bent pipes up to 180" (angle).
            - Manual work possible without feed
            - CE mark / declaration of conformity


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •