,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Optical Profile Grinding Machine

          Machinelist: Optical Profile Grinding Machine


          Jig Grinding Machine

          used Grinding machines Jig Grinding Machine HAUSER 3 SM


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-0444 · Jig Grinding Machine

          HAUSER - 3 SM - - unbekannt -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 400 mm︱total power requirement - kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2 x 3 x 2 m︱
          jig grinding machine Workspace: 400 x 250 x 400 Drive: 0 Control: 2-axis d.r.o.
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 400 mm
            total power requirement - kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2 x 3 x 2 m
            Description :
            jig grinding machine



            Workspace: 400 x 250 x 400
            Drive: 0
            Control: 2-axis d.r.o.


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 3 SMO


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-001788 · Jig Grinding Machine

          HAUSER - 3 SMO - - Serien-No. 907/82 -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 500 mm︱grinding diameter max. 220 mm︱table surface area 600 x 320 mm︱throat 310 mm︱range of angles 12 grad︱grinding spindle slide - vertical movement 110 mm︱stroke speeds 0 - 6 m/min.︱grinding spindle speed bis 50.000 U/min.︱peripheral speed max. 35 m/sec︱capacity ca. 7 kVA︱power capacity 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 3 x 3 m︱
          Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 500 mm
            grinding diameter max. 220 mm
            table surface area 600 x 320 mm
            throat 310 mm
            range of angles 12 grad
            grinding spindle slide - vertica. 110 mm
            stroke speeds 0 - 6 m/min.
            grinding spindle speed bis 50.000 U/min.
            peripheral speed max. 35 m/sec
            capacity ca. 7 kVA
            power capacity 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 3 x 3 m
            Description :
            Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz,
            feed motion in the table


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-764539 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1990 - CNC 314 ELESTA

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height mm︱Control CNC 314 ELESTA ︱total power requirement 15 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            Control CNC 314 ELESTA
            total power requirement 15 kW
            weight of the machine ca. 5500 kg
            Description :
            H A U S E R (Switzerland)
            CNC - Controlled High Precision Jig Grinding Machine
            Model S 3 – CNC 314
            Year approx.. 1990 S/N 32086
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 12.000 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm
            Total electrical load, approx. 15 kW - 400 V - 50 Hz
            Weight/Total weight approx. 4.000/5.500 kg

            Accessories / Special Features:
            • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation
            with a free and easy programming for Linear and circle interpolation.
            Direct Input of data on keyboard, also loading data on RS 232 connection.
            There is also a handwheel control device for setting – up purposes.
            Manual feed correction during the working cycle possible.
            • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good
            for blind holes.
            • W Axis for vertical positioning of grinding head slide,
            • U Axis for the infeed cycles during bore grinding, grinds different
            bore-Ø automatically.
            • C Axis Feed for the of the Planetary Head, grinds radii and contours
            • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some
            collets and arbors
            • Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            • Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            • Separate switch cabinet and control unit, Separate hydraulic unit with
            oilchiller,
            • Central lubrication, service tools, collets and grinding arbors/tools.

            Condition : Very good - Machine can be inspected under power
            commissioned by a Specialist.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-744584 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1987 - ELESTA CNC 314

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 485 mm︱Control ELESTA CNC 314 ︱total power requirement 10 kW︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. m︱
          H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 485 mm
            Control ELESTA CNC 314
            total power requirement 10 kW
            weight of the machine ca. 4000 kg
            Description :
            H A U S E R
            CNC - Controlled Vertical Precision Coordinate Grinding Machine
            Model S 3 – CNC 314
            Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 7.500 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight, approx. 4.000 kg

            Accessories / Special Features:
            * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with
            a free programming,the U-Axis is not interpolating it is just an infeed
            axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis
            W Axis for vertical positioning of grinding head,
            Z Axis as high speed stroke axis, also for blind-hole grinding and
            surface grinding.
            U Axis for the infeed cycles during bore grinding.
            C Axis Feed for the of the Planetary Head.
            * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets
            * Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            * Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            Separate switch and control cabinet. Covered working area.
            Separate hydraulic unit
            * Central lubrication, service tools.

            Condition : Very good - Machine can be inspected under power.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S50 / Adcos


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0447 · Jig Grinding Machine

          HAUSER - S50 / Adcos - - 1986/2018 - Adcos CNC 800

          Technical details
          x-travel 900 mm︱y-travel 600 mm︱workpiece height 500 mm︱Control Adcos CNC 800 ︱total power requirement 8,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos, Year of construction: 1986, Modernization: 2018 Modernization included: - New drives and electronics - Fire extinguishing unit, Brand: Kraft & Bauer - Extraction unit with stand and special bonnet, Brand: Büchel - Control Adcos CNC 800 - New command unit - Electronic hand wheel - Hydraulic Z-axis lifting unit - ASS with crash sensor The machine can be inspected by appointment under power. Operating hours (26/02/2024): * Total switch-on hours: 32.065 * Spindle hours: 13.414 TECHNICAL SPECIFICATIONS: * Control: Adcos CNC 800 Working range of the slides: Adjustment range: * X-axis (table slide): 900 mm * Y-axis (grinding head): 600 mm * W-axis (movable crossbeam): 600 mm * Z-axis: 170 mm SHZ (Z-axis free programmable in 10 grinding levels) * Workpiece height: approx. 500 mm Accuracy: approx. 5 µ/min Table surface: 640 x 950 mm Load: 1 tonne Working range of the grinding head: Speed with electric motors: 4.000 – 80.000 rpm Speed with air turbines: bis 40.000 und 160.000 rpm EQUIPMENT: * Grinding contact indicator * Extraction system * Fire extinguishing system * Documentation There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 900 mm
            y-travel 600 mm
            workpiece height 500 mm
            Control Adcos CNC 800
            total power requirement 8,5 kW
            Description :
            Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos,
            Year of construction: 1986, Modernization: 2018

            Modernization included:
            - New drives and electronics
            - Fire extinguishing unit, Brand: Kraft & Bauer
            - Extraction unit with stand and special bonnet, Brand: Büchel
            - Control Adcos CNC 800
            - New command unit
            - Electronic hand wheel
            - Hydraulic Z-axis lifting unit
            - ASS with crash sensor

            The machine can be inspected by appointment under power.

            Operating hours (26/02/2024):
            * Total switch-on hours: 32.065
            * Spindle hours: 13.414

            TECHNICAL SPECIFICATIONS:
            * Control: Adcos CNC 800

            Working range of the slides:
            Adjustment range:
            * X-axis (table slide): 900 mm
            * Y-axis (grinding head): 600 mm
            * W-axis (movable crossbeam): 600 mm
            * Z-axis: 170 mm
            SHZ (Z-axis free programmable in 10 grinding levels)
            * Workpiece height: approx. 500 mm

            Accuracy: approx. 5 µ/min
            Table surface: 640 x 950 mm
            Load: 1 tonne

            Working range of the grinding head:
            Speed with electric motors: 4.000 – 80.000 rpm
            Speed with air turbines: bis 40.000 und 160.000 rpm


            EQUIPMENT:
            * Grinding contact indicator
            * Extraction system
            * Fire extinguishing system
            * Documentation

            There is no guarantee for correctness and completeness of the technical details
            and accessories.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 40 - CNC ADCOS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-753396 · Jig Grinding Machine

          HAUSER - S 40 - CNC ADCOS 400 - - 1981 - ADCOS CNC 400

          Technical details
          x-travel 650 mm︱y-travel 450 mm︱workpiece height 585 mm︱Control ADCOS CNC 400 ︱total power requirement 15 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract
            x-travel 650 mm
            y-travel 450 mm
            workpiece height 585 mm
            Control ADCOS CNC 400
            total power requirement 15 kW
            weight of the machine ca. 5000 kg
            Description :
            H A U S E R (Switzerland)
            CNC Controlled Hi Precision Double Column Jig Grinder
            Model S 40 – CNC 311 / ADCOS 400 CNC
            Year 1981 / CNC modernized in 2008 # 0126
            _____________________________________________________________________

            Table size approx. 630 x 770 mm
            Table load capacity approx. 500 kg

            Table travel longitudinal max. (X) 650 mm
            Grinding head slide cross max. (Y) 450 mm

            Vertical adjustment of cross rail max. (W) 500 mm
            Grinding spindle stroke max. (Z) 140 mm
            Stroke number of grinding head (4cycles) 0,5-12 m/min.

            Vertical distance between
            Table/grinding spindle 0-585 mm
            Distance between columns 750 mm
            Conical grinding max. 16 °
            Grinding-Ø bore approx. 230/360 mm

            18 spindle speeds depending on spindle motor
            infinitely variable 4.500-80.000 rpm

            Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min.
            Planetary speed (C) 5-250 rpm
            U-axis, radial feed 6 mm

            Total electrical load approx. 15 kW - 400 V – 50 cycles
            Weight approx. 4.500 kg

            Accessories/ Special Features:
            • CNC Pathcontrol replaced and modernized into a ADCOS Control
            Model CNC 400, (German Manufacturer) including large monitor and
            relevant software, electronic handwheel, for following axis:
            X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke,
            C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail.
            • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding,
            Pre-selection of reversing stops (start movement + teach-in) and of
            stroke speed (infinitely variable),
            • U-axis as manual and controlled feed-axis radial, mounted on grinding
            head, with electr.display of feeding size
            1 Grinding motor mounted on spindle, maybe up to a spindle speed of
            30.000 rpm,
            • Mounted accustic grinding contact-display device KSV 5
            • Separate standing coolant facility, switching- and control cabinet,
            separate hydraulic system, central lubrication system, dust suction, etc

            Condition : very good / can be inspected under power
            Delivery : ex stock – as inspected
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER  3SM  DR


          • INDUBA GmbH
          • Tuttlinger Straße 51
          • 78628 Rottweil
          • Deutschland

          • 0741 21787
            0741 13562
          • info@induba.de
            www.induba.de
          #2002-10022 · Jig Grinding Machine

          HAUSER - 3SM DR - - 1977 -

          Technical details
          x-travel mm︱y-travel mm︱


        • INDUBA GmbH
        • Tuttlinger Straße 51
        • 78628 Rottweil
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine Moore No. 2c


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12165 · Jig Grinding Machine

          Moore - No. 2c - - 1975 -

          Technical details
          x-travel 420 mm︱y-travel 270 mm︱workpiece height - mm︱table-size 254 x 482 mm︱throat 254 / 318 mm︱grinding spindle speeds 12. - 60.000 U/min.︱spindle stroke 92 mm︱spindle turning speed range 90, 136, 184, 280 U/min︱number of strokes adjustable 2 - 120 Hübe bei 51 mm︱0 1,25 µm bei 30 mm︱Required air-pressure 7 bar︱weight of the machine ca. 1430 kg︱dimensions of the machine ca. 1,45 x 1,2 x 2,4 m︱Electric 380 Volt ︱Tool cupboard 2 ︱Rotary table Moore 254 mm︱Grinding head with air turbine 4 x
          The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Special price! Machine dealer with own stock of 1600 m².
            x-travel 420 mm
            y-travel 270 mm
            workpiece height - mm
            table-size 254 x 482 mm
            throat 254 / 318 mm
            grinding spindle speeds 12. - 60.000 U/min.
            spindle stroke 92 mm
            spindle turning speed range 90, 136, 184, 280 U/min
            number of strokes adjustable 2 - 120 Hübe bei 51 mm
            0 1,25 µm bei 30 mm
            Required air-pressure 7 bar
            weight of the machine ca. 1430 kg
            dimensions of the machine ca. 1,45 x 1,2 x 2,4 m
            Tool cupboard 2
            Rotary table Moore 254 mm
            Grinding head with air turbine 4 x
            Description :
            The Moore gauge grinding machine is equipped with grinding heads that are
            driven by an air turbine. There are 4 grinding heads available.
            Pneumohydraulically controlled up and down stroke movement, infinitely
            adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the
            measuring spindles with vernier 0.001 mm, contour grinding, cone grinding,
            groove grinding, eccentric adjustment of the grinding spindle. Machine body
            made of Meehanit cast, strong internal ribbing, cross slide fully supported -
            no overhang of the table, heating in the main spindle housing.
            Special price!
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 5 SM


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2945 · Jig Grinding Machine

          HAUSER - 5 SM - - 1971 - Digitalanzeige

          Technical details
          x-travel 700 mm︱y-travel 500 mm︱workpiece height 675 mm︱table surface area 900 x 770 mm︱column daylight 840 mm︱turning speed range - grinding spindle 9 - 45.000 U/min︱total power requirement 6,5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,6 x 5 m︱control Digitalanzeige
            x-travel 700 mm
            y-travel 500 mm
            workpiece height 675 mm
            table surface area 900 x 770 mm
            column daylight 840 mm
            turning speed range - grinding s. 9 - 45.000 U/min
            total power requirement 6,5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,6 x 5 m
            control Digitalanzeige


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine MOORE Nr. 3


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6633 · Jig Grinding Machine

          MOORE - Nr. 3 - - 1969 -

          Technical details
          x-travel 280 mm︱y-travel 460 mm︱table-size 280x610 mm︱table movement 280x460 mm︱spindle turning speed range 40-2500 U/min︱grinding range 5,0-125 mm︱spindle diameter mm︱grinding depth 0,4-5 mm︱stroke length max. 92 mm︱total power requirement kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2x1,5x2,8 m︱
          Single Column Jig Grinder, conventional, DRO, accessories
            x-travel 280 mm
            y-travel 460 mm
            table-size 280x610 mm
            table movement 280x460 mm
            spindle turning speed range 40-2500 U/min
            grinding range 5,0-125 mm
            grinding depth 0,4-5 mm
            stroke length max. 92 mm
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2x1,5x2,8 m
            Description :
            Single Column Jig Grinder, conventional, DRO, accessories


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Optical Profile Grinding Machine

          used Grinding machines Optical Profile Grinding Machine BLOHM Profimat MC 610 S


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17777 · Optical Profile Grinding Machine

          BLOHM - Profimat MC 610 S - - 2012 - SINUMERIK 840 D

          Technical details
          grinding length 1025 mm︱grinding width 520 mm︱workpiece height - mm︱Control SINUMERIK 840 D ︱tool taper HSK-A 63 ︱A - axis + 110 / - 5 °︱workpiece weight 30 kg︱distance grinding spindle - table min./max. 473,5 - 1023,5 mm︱x-axis 520 mm︱y-axis 550 mm︱z-axis 1000 mm︱V-axis 166 mm︱feed x-axis 4 - 6.000 mm/min︱feed y- axis 4 - 4.000 mm/min︱Feed z- axis 30 - 25.000 mm / min.︱table dimensions 1.400 x 874 mm︱spindle speeds (infinitely variable) 0 - 12.000 U/min︱power capacity - grinding motor 35,00 kW︱grinding wheel diam. min/max. 60 / 100 ︱grinding wheel width 20 mm︱
          5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.
            grinding length 1025 mm
            grinding width 520 mm
            workpiece height - mm
            Control SINUMERIK 840 D
            tool taper HSK-A 63
            A - axis + 110 / - 5 °
            workpiece weight 30 kg
            distance grinding spindle - tabl. 473,5 - 1023,5 mm
            x-axis 520 mm
            y-axis 550 mm
            z-axis 1000 mm
            V-axis 166 mm
            feed x-axis 4 - 6.000 mm/min
            feed y- axis 4 - 4.000 mm/min
            Feed z- axis 30 - 25.000 mm / min.
            table dimensions 1.400 x 874 mm
            spindle speeds (infinitely varia. 0 - 12.000 U/min
            power capacity - grinding motor 35,00 kW
            grinding wheel diam. min/max. 60 / 100
            grinding wheel width 20 mm
            Description :
            5 Axis Profile grinding machine, with SIEMENS SIN840D,
            double dividing head (B-C axis), V-axis (coolant nozzles),
            EROWA tool changing device (machine can also be operated without
            a tool changer), fire extinguishing device,
            Renishaw probe prepared
            without coolant device - was connected to the central supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Optical Profile Grinding Machine BLOHM Profimat MC 610 S


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17698 · Optical Profile Grinding Machine

          BLOHM - Profimat MC 610 S - - 2010 - SINUMERIK 840 D

          Technical details
          grinding length 1025 mm︱grinding width 520 mm︱workpiece height - mm︱Control SINUMERIK 840 D ︱tool taper HSK-A 63 ︱A - axis + 110 / - 5 °︱workpiece weight 30 kg︱distance grinding spindle - table min./max. 473,5 - 1023,5 mm︱x-axis 520 mm︱y-axis 550 mm︱z-axis 1000 mm︱V-axis 166 mm︱feed x-axis 4 - 6.000 mm/min︱feed y- axis 4 - 4.000 mm/min︱Feed z- axis 30 - 25.000 mm / min.︱table dimensions 1.400 x 874 mm︱spindle speeds (infinitely variable) 0 - 12.000 U/min︱power capacity - grinding motor 35,00 kW︱grinding wheel diam. min/max. 60 / 100 ︱grinding wheel width 20 mm︱
          5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared without coolant device - was connected to the central supply.
            grinding length 1025 mm
            grinding width 520 mm
            workpiece height - mm
            Control SINUMERIK 840 D
            tool taper HSK-A 63
            A - axis + 110 / - 5 °
            workpiece weight 30 kg
            distance grinding spindle - tabl. 473,5 - 1023,5 mm
            x-axis 520 mm
            y-axis 550 mm
            z-axis 1000 mm
            V-axis 166 mm
            feed x-axis 4 - 6.000 mm/min
            feed y- axis 4 - 4.000 mm/min
            Feed z- axis 30 - 25.000 mm / min.
            table dimensions 1.400 x 874 mm
            spindle speeds (infinitely varia. 0 - 12.000 U/min
            power capacity - grinding motor 35,00 kW
            grinding wheel diam. min/max. 60 / 100
            grinding wheel width 20 mm
            Description :
            5 Axis Profile grinding machine, with SIEMENS SIN840D,
            double dividing head (B-C axis), V-axis (coolant nozzles),
            EROWA tool changing device (machine can also be operated without
            a tool changer), fire extinguishing device,
            Renishaw probe prepared
            without coolant device - was connected to the central supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Optical Profile Grinding Machine ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-15990 · Optical Profile Grinding Machine

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          BLOHM - ABA -