,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bevel Gear Generator - Spiral

          Machinelist: Bevel Gear Generator - Spiral


          Bevel Gear Generator - Spiral

          used Gear cutting machines Bevel Gear Generator - Spiral HURTH-MODUL KF 250 B


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24006 · Bevel Gear Generator - Spiral

          HURTH-MODUL - KF 250 B - - 1998 - Siemens Sinumerik 840 C

          Technical details
          workpiece diameter with ratio 1:10 300 mm︱workpiece diameter with ratio 1:1 212 mm︱max. number of teeth 200 ︱min. number of teeth 6 ︱x-travel 300 mm︱X - Axis speed 0,1-5.000 mm/sec.︱y-travel 400 mm︱Y - Axis speed 0,1-5.000 mm/sec.︱A - axis -170 / +170 °︱control Siemens Sinumerik 840 C ︱total power requirement 38 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 4,20 x 2,20 x 2,10 m︱
          incl. suction
            workpiece diameter with ratio 1:. 300 mm
            workpiece diameter with ratio 1:. 212 mm
            max. number of teeth 200
            min. number of teeth 6
            x-travel 300 mm
            X - Axis speed 0,1-5.000 mm/sec.
            y-travel 400 mm
            Y - Axis speed 0,1-5.000 mm/sec.
            A - axis -170 / +170 °
            control Siemens Sinumerik 840 C
            total power requirement 38 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 4,20 x 2,20 x 2,10 m
            Description :
            incl. suction



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-16040 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1,5 ︱total power requirement 62 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7x4,4x2,45 m︱
          max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1,5
            total power requirement 62 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7x4,4x2,45 m
            Description :
            max. wheel diameter mm
            gear width mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m



            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 [...]

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 [...]
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min




        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • 36.000 €
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral WMW-MODUL MK 12


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00446 · Bevel Gear Generator - Spiral

          WMW-MODUL - MK 12 - - - konventionell

          Technical details
          weight 29,4 kg︱
          WMW MODULE Arcoid cutter head MK 12" 2§m - 304.8 for bevel gears with tapered tooth height analog Gleason for bevel gear milling machine MODUL ZFTKK 500 28 knife inserts 05M VESTA WORKS 552 A-311 AJ/ck 30499005 used weight 29.4kg We have 4 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 29,4 kg
            Description :
            WMW MODULE
            Arcoid cutter head
            MK 12"
            2§m - 304.8
            for bevel gears with tapered tooth height
            analog Gleason
            for bevel gear milling machine MODUL ZFTKK 500
            28 knife inserts 05M
            VESTA WORKS 552 A-311
            AJ/ck
            30499005
            used
            weight 29.4kg

            We have 4 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact

          Cold Rolling Machine

          used Gear cutting machines Cold Rolling Machine KOVOSIT MAS Roller 2800 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20120 · Cold Rolling Machine

          KOVOSIT MAS - Roller 2800 CNC - - 2018 - Siemens 840 D

          Technical details
          swing diameter 300 (280) mm︱workpiece diameter . mm︱workpiece length 2876 mm︱drive motor 11 kW︱spindle speeds 0 - 400 U/min︱Control Siemens 840 D ︱Distance between centres 2876 mm︱workpiece weight max. 1000 kg︱spindle bore 106 mm︱spindle taper 112 mm︱b-axis +/- 35 °︱z-axis 2876 mm︱tail stock ︱tailstock quill diameter 115 mm︱tailstock quill adjustment 160 mm︱tailstock taper MT 6 ︱total power requirement kW︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. m︱
          Cold Rolling Machine The function of the machine lies in the technology of cold forming - rolling of cylindrical, conical and transition radius surfaces of shaft components, e.g. vehicle axles. Among other things, this function predetermines the area of ??application of the machine for specialized production of parts using surface strengthening technology, always perpendicular to the surface of the rolling tool to the material surface by means of the B-axis tilting mechanism controlled by the CNC system. he locking of the rolling heads in a given position is ensured by a drive with self-locking worm gearboxes. The rolling equipment is located on a longitudinal support. The slide moves along the machine bed in the longitudinal direction by means of a CNC- controlled Z axis. The movement in the X-axis is realized hydraulically by two quill of rolling heads placed against each other, into which the rolling tools themselves are clamped. Continuous pressure changes on the rolling tools can be changed in the program during the work cycle. The system enables indirect independent measurement of rolling force, recording and archiving of rolling process data. equipted with : - CNC control Siemens Sinumerik model 840D - Tailstock - Hydraulic Unit - Lubrication Range of multi-roller power: 1-50kN - Max. power of multi-roller with using of tilting B-axes (B = ± 35°: 20kN - Max. power of multi-roller without using of tilting B-axes (B = 0°): 50kN Axis B: - Ratio of worm-gear unit: 1:40 - Ratio of spur gearing of tilting mechanism: 1:12
            swing diameter 300 (280) mm
            workpiece diameter . mm
            workpiece length 2876 mm
            drive motor 11 kW
            spindle speeds 0 - 400 U/min
            Control Siemens 840 D
            Distance between centres 2876 mm
            workpiece weight max. 1000 kg
            spindle bore 106 mm
            spindle taper 112 mm
            b-axis +/- 35 °
            z-axis 2876 mm
            tailstock quill diameter 115 mm
            tailstock quill adjustment 160 mm
            tailstock taper MT 6
            weight of the machine ca. 6,2 t
            Description :
            Cold Rolling Machine
            The function of the machine lies in the technology of cold forming - rolling of
            cylindrical, conical and transition radius surfaces of shaft components, e.g.
            vehicle axles. Among other things, this function predetermines the area of
            ??application of the machine for specialized production of parts using surface
            strengthening technology, always perpendicular to the surface of the rolling
            tool to the material surface by means of the B-axis tilting mechanism
            controlled by the CNC system. he locking of the rolling heads in a given
            position is ensured by a drive with self-locking worm gearboxes.
            The rolling equipment is located on a longitudinal support. The slide moves
            along the machine bed in the longitudinal direction by means of a CNC-
            controlled Z axis. The movement in the X-axis is realized hydraulically by two
            quill of rolling heads placed against each other, into which the rolling tools
            themselves are clamped. Continuous pressure changes on the rolling tools can be
            changed in the program during the work cycle. The system enables indirect
            independent measurement of rolling force, recording and archiving of rolling
            process data.

            equipted with :
            - CNC control Siemens Sinumerik model 840D
            - Tailstock
            - Hydraulic Unit
            - Lubrication
            Range of multi-roller power: 1-50kN
            - Max. power of multi-roller with using of tilting B-axes (B = ± 35°: 20kN
            - Max. power of multi-roller without using of tilting B-axes (B = 0°): 50kN
            Axis B:
            - Ratio of worm-gear unit: 1:40
            - Ratio of spur gearing of tilting mechanism: 1:12


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine EXCELLO / Boehringer XK 837


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03273 · Cold Rolling Machine

          EXCELLO / Boehringer - XK 837 - - 2009 - Siemens 840 D

          Technical details
          rolling capacity max. / t︱workpiece diameter / mm︱workpiece length 1000 mm︱Control Siemens 840 D ︱X1, X2-axis travel 1260 mm︱Z1, Z2-axis travel 90 mm︱Y1-axis travel 320 mm︱Y2-axis travel 800 mm︱Q-axis travel 215 mm︱X1, X2-axis speed max. 28 m/min︱Z1, Z2-axis speed max. 3 m/min︱Y1-axis speed max. 30 m/min︱Y2-axis speed max. 60 m/min︱Q-axis speed max. 30 m/min︱module 0 / 3-2,5 ︱profile width bis/upto 180 mm︱pressure angle 25-45 °︱total power requirement 63 kVA︱weight of the machine ca. 17,85 t︱dimensions of the machine ca. 6,5 x 5,68 x 2,553 m︱
            rolling capacity max. / t
            workpiece diameter / mm
            workpiece length 1000 mm
            Control Siemens 840 D
            X1, X2-axis travel 1260 mm
            Z1, Z2-axis travel 90 mm
            Y1-axis travel 320 mm
            Y2-axis travel 800 mm
            Q-axis travel 215 mm
            X1, X2-axis speed max. 28 m/min
            Z1, Z2-axis speed max. 3 m/min
            Y1-axis speed max. 30 m/min
            Y2-axis speed max. 60 m/min
            Q-axis speed max. 30 m/min
            module 0 / 3-2,5
            profile width bis/upto 180 mm
            pressure angle 25-45 °
            total power requirement 63 kVA
            weight of the machine ca. 17,85 t
            dimensions of the machine ca. 6,5 x 5,68 x 2,553 m
            Description :



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine EX-CELL-O XK 225


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-346254 · Cold Rolling Machine

          EX-CELL-O - XK 225 - - 1987 -

          Technical details
          rolling capacity max. NA t︱workpiece diameter 38 mm︱workpiece length 500 mm︱total power requirement 24 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
          Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            rolling capacity max. NA t
            workpiece diameter 38 mm
            workpiece length 500 mm
            total power requirement 24 kW
            weight of the machine ca. 10 t
            Description :
            Max.Ø tool slide stroke 760 mm
            Max.Ø rack length 610 mm

            Length of workpiece between centres, approx. 500 mm
            Max. tooth width / profile width 92 mm
            Max. workpiece Ø 38 mm
            Tailstock stroke on outboard support, hydraulic, approx. 500 mm

            Module range 0.3 - 1.3

            Total electrical load, approx. 24 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
            * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
            * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
            * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.

            Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.




            Condition : Very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Cold Rolling Machine GROB 95 M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17374 · Cold Rolling Machine

          GROB - 95 M - - 1973 -

          Technical details
          workpiece diameter 115 mm︱workpiece length 2150 mm︱gear hobbing diameter 120 mm︱max. number of teeth 96 ︱min. number of teeth 12 ︱roll head turning speed range 1.800 U/min︱feeds 30 - 180 mm/min︱rapid traverse 1.800 mm/min︱total power requirement 20 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 5,7 x 3,0 x 2,3 m︱
            workpiece diameter 115 mm
            workpiece length 2150 mm
            gear hobbing diameter 120 mm
            max. number of teeth 96
            min. number of teeth 12
            roll head turning speed range 1.800 U/min
            feeds 30 - 180 mm/min
            rapid traverse 1.800 mm/min
            total power requirement 20 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 5,7 x 3,0 x 2,3 m


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          KLINGELNBERG - HURTH-MODUL - WMW-MODUL -