Bevel Gear Grinding Machine
Machinelist: Bevel Gear Grinding Machine
Bevel Gear Grinding Machine
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-17944 · Bevel Gear Grinding Machine
GLEASON - Phoenix 275 G - - 2008 - SIN 840 D SIEMENS
Technical details
Hoffmann coolant filter system ERK 140-V(L-C) (built 2008) VT oil mist filter system
Datasheet
Request / Contact
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-17513 · Bevel Gear Grinding Machine
GLEASON - Phoenix 275 G - - 2007 - 160 i - MB FANUC
Technical details
WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available
Datasheet
Request / Contact
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-17512 · Bevel Gear Grinding Machine
GLEASON - Phoenix 275 G - - 2005 - SIN 840 D SIEMENS
Technical details
WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-328540 · Bevel Gear Grinding Machine
GLEASON - PHOENIX 200 HG - - 1997 -
Technical details
Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-304112 · Bevel Gear Grinding Machine
GLEASON - 120 / 888 W - - 1980 -
Technical details
Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
Gear Testing Machine
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23114 · Gear Testing Machine
PFAUTER - Zahnräder / Wechselräder P 251 - - unbekannt -
Technical details
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-16810 · Gear Testing Machine
HOEFLER - EMZ 632 - - overhauled - Wenzel Win Geco CNC
Technical details
Gear Test Center will be completely overhauled after Order and equipped with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty
Datasheet
Request / Contact
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E23069 · Gear Testing Machine
Frenco - ZW 401 - - 2014 - Frenco
Technical details
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03104 · Gear Testing Machine
OERLIKON-KLINGELNBERG - R30 - - 2007 -
Technical details
Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23251 · Gear Testing Machine
KLINGELNBERG-OERLIKON - CS 200 - - 2004 -
Technical details
In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
Datasheet
Request / Contact
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23250 · Gear Testing Machine
KLINGELNBERG-OERLIKON - CS 200 - - 2002 -
Technical details
In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
Datasheet
Request / Contact
- ADEM MASCHINEN GMBH
- Karl-Benz-Straße 1
- 40764 Langenfeld (Rheinland)
- Deutschland
-
+49 (0) 2173- 287 77 07
+49 (0) 2173- 287 77 05 -
adem-maschinen@t-online.de
www.adem-maschinen.com
#2000-324 · Gear Testing Machine
HÖFLER - H1301/1400 - - 1992 -
Technical details
14.500 €
Datasheet
Request / Contact
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-02212 · Gear Testing Machine
HÖFLER - EMZ 2002 / 2602 - - 1991 -
Technical details
Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E2182 · Gear Testing Machine
HOEFLER - EMZ 632 - - 1990 - Zeiss
Technical details
Check the profile, the tooth trace and the pitch on external and internal toothed straight and helical gears. Software hob program! Software Unknown interlocking!
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-255595 · Gear Testing Machine
HOEFLER - EMZ 400 - - 1988 -
Technical details
H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1 Total electrical load, approx. 1.5 kW - 380 V - 50 Hz Weight 2,000 kg Machine is suitable for measuring: Profile and flank lines on a chosen number of teeth on the gear circumference, as well as tooth pitch and runout tests of gears with straight and helical teeth. Accessories / Special Features ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces. ? X = tangential adjustment of measuring head (cross). ? Y = Radial adjustment of complete measuring slide (250 mm) ? Z = Vertical travel of measuring slide. ? C = Table rotation. ? Automatic feed-in of 3-D measuring probe into the base circle and into tooth gap. ? Automatic evaluation of measuring results according to DIN or AGMA. Printing of results, via plotter or a printer. ? Separate HP Workstation, Model 382, the operator carries on a dialog with the computer during the Measuring process via keyboard. The CNC control of the machine is only needed for installation and Maintenance. ? Flexible hand-held control unit allows manual control of the axes for quick feed or creep feed. Inside the system we have a measuring software available which is developed for the MERCEDES BENZ Company, however all standard gears can be measured with this software. The Machine was recently checked through by a HÖFLER Specialist Condition : Very good – machine can inspected under power by appointment Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-09135 · Gear Testing Machine
KLINGELNBERG - PFSU 1600 HP - - 1985/95 -
Technical details
Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle; Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities. Accesories / Special Features: + Optical setting of base circle and optical angle settings without the use of base circle plates + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using hand wheels. + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports 400 and 470 mm long + Counter bracket Model AV 17 with maximum mounting length of 1150 mm + Separate electric cabinet for controlling manual movements, in conjunction with... + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted on the back of the machine (but without the indexing device) Levelling feet in very good working condition - Machine can be inspected under power - Serial-Number B 2281
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-375218 · Gear Testing Machine
KLINGELNBERG - PFSU 2500 - - 1980 -
Technical details
Extra große ZR-Prüfmaschine, Gegenhalter
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-559494 · Gear Testing Machine
MAHR - 894 C - - 1980 -
Technical details
Manual Two Flank Gear Tester
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-422129 · Gear Testing Machine
KLINGELNBERG - PFSU 1600 - - 1975 -
Technical details
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-547677 · Gear Testing Machine
MAHR - 895 - - 1965 -
Technical details
Two Flank Gear Tester
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-568700 · Gear Testing Machine
MAAG - DAS 1 - - 1945 -
Technical details
Manually operated 2-Flank Gear Tester
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-02626 · Gear Testing Machine
MAAG - PZH 60 - - -
Technical details
- SK Maschinen-Service GmbH
- Tackweg 4
- 47918 Tönisvorst
- Deutschland
-
02151 79350
02151 793535 -
info@sk-maschinen.de
www.sk-maschinen.de
#1038-80287 · Gear Testing Machine
HOEFLER - EVTM - - -
Technical details
pitch and run-out tester unit for gear measuring machines.
- ADEM MASCHINEN GMBH
- Karl-Benz-Straße 1
- 40764 Langenfeld (Rheinland)
- Deutschland
-
+49 (0) 2173- 287 77 07
+49 (0) 2173- 287 77 05 -
adem-maschinen@t-online.de
www.adem-maschinen.com
#2000-378 · Gear Testing Machine
KLINGELNBERG - PNC 30 - - - ---
Technical details
Datasheet
Request / Contact
- 1
- 2
TOP Manufacturer:
GLEASON -