,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Gear Shaping Machine

          Machinelist: Gear Shaping Machine


          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine CUGIR MD 630


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-014 · Gear Shaping Machine

          CUGIR - MD 630 - - 1982 -

          Technical details



        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine CUGIR-LORENZ MD 631 (LS 630)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-10722 · Gear Shaping Machine

          CUGIR-LORENZ - MD 631 (LS 630) - - 1991/12 -

          Technical details
          max. wheel diameter 650 mm︱gear width 200 mm︱max. module 10 ︱min. module 1 ︱work accuracy DIN 6 ︱clamping table diameter 710 mm︱table bore diameter 150 mm︱number of strokes - stepless 35,5 - 560 c/min︱max. ram stroke 230 mm︱feeds 3,55 - 40 mm/min︱radial feed 0,8 - 9 mm/min︱work-spindle diameter 110 mm︱total power requirement 28,2 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,8 x 2,3 x 2,5 m︱
          Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul
            max. wheel diameter 650 mm
            gear width 200 mm
            max. module 10
            min. module 1
            work accuracy DIN 6
            clamping table diameter 710 mm
            table bore diameter 150 mm
            number of strokes - stepless 35,5 - 560 c/min
            max. ram stroke 230 mm
            feeds 3,55 - 40 mm/min
            radial feed 0,8 - 9 mm/min
            work-spindle diameter 110 mm
            total power requirement 28,2 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,8 x 2,3 x 2,5 m
            Description :
            Gear shaping machine for the production of spur gears, for
            Internal and external gears - Built under licence from LORENZ and identical in
            construction to LORENZ LS 630

            complete Modernisation + overhaul in 2012 with:
            - new painting
            - new electrical system from Telemecanique
            - Counter Holder
            - Chip conveyor
            - Coolant unit
            - change gears

            Not used in production again after overhaul


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine FELLOWS 20-8


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17934 · Gear Shaping Machine

          FELLOWS - 20-8 - - reb 1996 - Fanuc 15M

          Technical details

          for internal and external spur and helical Gears, splines, pinions equipped with: - CNC Control FANUC 15M (6 Axis) The Hyperloop system has been replaced with a Fanuc 15M 6-Axis "CNC" Controller motors and Drives. The Fanuc CNC will control the following axis: - Work table rotation (no change gears required) - Cutter spindle rotation - Work table infeed - Cutter spindle stroking speed - Stroke position - Stroke length adjustment (from CNC controller, not the top of machine) Manual pulse generator-(MPG) controls all six "CNC" axis including stroke length adjustment - Special Mounted work table with self centering chuck fixture - Chip conveyor - Coolant tank - Electrical panel w/ A/C units - Hydraulic unit with Heat exchanger - Both work and cutter spindle have rapid rotation for indicating purposes - Four cut capability selectable for 1-cut, 2-cut, 3-cut, & 4 cut operations with stroking speed, depth feed rate, depth of cut and rotary feed infinitely variable and preset for each cut High output, quick return, infinitely variable stroking drive with adj,return ratios as follows: 12 to 300 SPM at 2:1 ratio / 12 to 250 SPM at 3:1 ratio Rotary feed: The custom software on the Fanuc controller allows direct input of rotary feeds for each cut. Digressive Infeed (infeed per stroke diminishing from a preset high valueat beginning of cut to a preset low value at depth) - Adjustable cutter positioning at top of stroke - Crowning and taper capability via back off cam - Complete "Hydrostroke" hydraulic power unit - Constant pressurized lubrication to all working elements - Mechanical straight spur guide for cutter spindle - Cutter spindle adaptor - Guards, covers, misc. - Magnetic chip conveyor - Fully air-condition electrical cabinet Maximum distance centerline of cutter spindle to centerline of work spindle: 409mm Minimum distance centerline of cutter spindle to centerline of work spindle: 20,5mm Maximum distance from work spindle face to bottom of cutter spindle in maximum upper position: 750mm
            Description :
            for internal and external spur and helical Gears, splines, pinions
            equipped with:
            - CNC Control FANUC 15M (6 Axis)
            The Hyperloop system has been replaced with a Fanuc 15M 6-Axis "CNC" Controller
            motors and Drives. The Fanuc CNC will control the following axis:
            - Work table rotation (no change gears required)
            - Cutter spindle rotation
            - Work table infeed
            - Cutter spindle stroking speed
            - Stroke position
            - Stroke length adjustment (from CNC controller, not the top of machine)
            Manual pulse generator-(MPG) controls all six "CNC" axis including stroke length
            adjustment
            - Special Mounted work table with self centering chuck fixture
            - Chip conveyor
            - Coolant tank
            - Electrical panel w/ A/C units
            - Hydraulic unit with Heat exchanger



            - Both work and cutter spindle have rapid rotation for indicating purposes
            - Four cut capability selectable for 1-cut, 2-cut, 3-cut, & 4 cut operations
            with stroking speed, depth feed rate, depth of cut and rotary feed infinitely
            variable and preset for each cut
            High output, quick return, infinitely variable stroking drive with adj,return
            ratios as follows: 12 to 300 SPM at 2:1 ratio / 12 to 250 SPM at 3:1 ratio

            Rotary feed: The custom software on the Fanuc controller allows direct input of
            rotary feeds for each cut. Digressive Infeed (infeed per stroke diminishing
            from a preset high valueat beginning of cut to a preset low value at depth)
            - Adjustable cutter positioning at top of stroke
            - Crowning and taper capability via back off cam
            - Complete "Hydrostroke" hydraulic power unit
            - Constant pressurized lubrication to all working elements
            - Mechanical straight spur guide for cutter spindle
            - Cutter spindle adaptor
            - Guards, covers, misc.
            - Magnetic chip conveyor
            - Fully air-condition electrical cabinet


            Maximum distance centerline of cutter spindle to centerline of work spindle:
            409mm
            Minimum distance centerline of cutter spindle to centerline of work spindle:
            20,5mm
            Maximum distance from work spindle face to bottom of cutter spindle in maximum
            upper position: 750mm


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine FELLOWS 4 AGS


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-52074 · Gear Shaping Machine

          FELLOWS - 4 AGS - - 1968 -

          Technical details

          Max. geardiameter for internal/external gears 152 mm Max. gear width 50 mm Module range 0.5 - 5 Length of stroke 0 - 55 mm Adjustment of stroke position 75 mm Internal taper of spindle (probably) MK 4 Table size, approx. 150 mm Table bore 63.5 mm Mounting height between table and shaper head 148/236 mm 9 strokes 98 - 635 /min No. of teeth 11 - 120 Feed range, per workpiece revolution 0.02 - 0.7 mm Total electrical load, approx. 4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features * Machine is at present equipped with helical guide, 38°41', for internal teeth on hollow gears. * Pneumatic workpiece clamping device in table: External collet chuck for workpieces with external of approx. 150 mm. * Machine is raised 100 mm with raiser block. * Central lubrication. * Various change gears. * Shaper cutter holder.
            Description :
            Max. geardiameter for internal/external gears 152 mm

            Max. gear width 50 mm
            Module range 0.5 - 5

            Length of stroke 0 - 55 mm
            Adjustment of stroke position 75 mm
            Internal taper of spindle (probably) MK 4

            Table size, approx. 150 mm
            Table bore 63.5 mm
            Mounting height between table and shaper head 148/236 mm

            9 strokes 98 - 635 /min
            No. of teeth 11 - 120
            Feed range, per workpiece revolution 0.02 - 0.7 mm

            Total electrical load, approx. 4 kW - 380 V - 50 Hz
            Weight, approx. 3,000 kg

            Accessories / Special Features
            * Machine is at present equipped with helical guide, 38°41',
            for internal teeth on hollow gears.
            * Pneumatic workpiece clamping device in table: External
            collet chuck for workpieces with external of approx. 150 mm.
            * Machine is raised 100 mm with raiser block.
            * Central lubrication. * Various change gears.
            * Shaper cutter holder.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19020 · Gear Shaping Machine

          GLEASON - GP 130 S - - 2002 - 840 D Siemens

          Technical details

          ounterhold with hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations
            Description :
            ounterhold with
            hydraulically operated counter arm and
            Linear guides.
            For automatic ring loader, with 4 stations



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19022 · Gear Shaping Machine

          GLEASON - GP 130 S - - 2002 - Siemens 840 D

          Technical details

          Counterhold with hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations Swivel head!
            Description :
            Counterhold with
            hydraulically operated counter arm and
            Linear guides.
            For automatic ring loader, with 4 stations
            Swivel head!


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON PFAUTER GP 130 S


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17342 · Gear Shaping Machine

          GLEASON PFAUTER - GP 130 S - - 2004 - Siemens 840 D

          Technical details

          Workpiece belt EWAB available Machine was operated with emulsion
            Description :
            Workpiece belt EWAB available
            Machine was operated with emulsion


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON PFAUTER GP 300 ES


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-20055 · Gear Shaping Machine

          GLEASON PFAUTER - GP 300 ES - - 2002 - Siemens 840 D

          Technical details

          with electronic helicel guide colum inclination range -0,5 -11,5 degree with traveling steady
            Description :
            with electronic helicel guide
            colum inclination range -0,5 -11,5 degree
            with traveling steady



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18108 · Gear Shaping Machine

          GLEASON- PFAUTER - GP 130 S - - 2001 - Siemens 840 C

          Technical details

          serial Nr. 28785
            Description :
            serial Nr. 28785


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18043 · Gear Shaping Machine

          GLEASON- PFAUTER - GP 130 S - - 2004 - Siemens 840 D

          Technical details

            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

          •   
          •   
          • 1  


          Find the best used gear shaping machine for your needs!
          A gear shaping machine for all your metalworking needs

          A gear shaping machine is used for the cutting of teeth in gears of a variety of shapes and sizes. If your business demands large scale gear production then a gear shaping machine is an invaluable piece of equipment. Whether you need to manufacture internal or external gears a gear shaping machine can improve the efficiency of your business. Buying new equipment can be pricey so used machines are a great solution for those interested in a budget-friendly option.

          Maximize your efficiency with a gear shaping machine

          A high quality gear shaping machine offers business owners reliability precision and efficiency. Most modern machines have high automation levels freeing you to devote your time to other projects while your gear shaping machine performs without issue. Money can be a problem when outfitting a workplace but buying used metalworking equipment is an ideal solution. LagerMaschinen offers your great quality products in a convenient online location. Browse LagerMaschinen's extensive list of used machinery to find the best fit for your needs.

          Save time and money while shopping at LagerMaschinen

          Shopping for industrial machinery can be a tedious and overwhelming process. Comparing prices and features is time-consuming and daunting. Save yourself time and money by looking for your next piece of equipment at LagerMaschinen. The user-friendly forum of used industrial equipment allows you to shop for machinery by price features and location. Whether you're in the market for a gear shaping machine or any other industrial machines LagerMaschinen offers you a great selection of high-quality used machinery in an easy-to-use forum.