,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bevel Gear Lapping Machine

          Machinelist: Bevel Gear Lapping Machine


          Bevel Gear Lapping Machine

          used Gear cutting machines Bevel Gear Lapping Machine GLEASON 600 HTL


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18008 · Bevel Gear Lapping Machine

          GLEASON - 600 HTL - - 2007 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 600 mm︱pinion diameter - max. 254 mm︱crown gear turning speeds max. 3.100 U/min︱pinion turning speeds max. 3.100 U/min︱control GE FANUC Series 160i-M ︱pinion cone range 165-345 mm︱crown gear cone range 89 - 267 mm︱lapping torque 2 - 24 Nm︱total power requirement 36 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,80 x 2,40 x 1,90 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 600 mm
            pinion diameter - max. 254 mm
            crown gear turning speeds max. 3.100 U/min
            pinion turning speeds max. 3.100 U/min
            control GE FANUC Series 160i-M
            pinion cone range 165-345 mm
            crown gear cone range 89 - 267 mm
            lapping torque 2 - 24 Nm
            total power requirement 36 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1,80 x 2,40 x 1,90 m
            Description :
            Own lapping system!
            Was also operated at a lapping center



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine OERLIKON L 60


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18007 · Bevel Gear Lapping Machine

          OERLIKON - L 60 - - 2002 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 500 mm︱distance crown gear spindle - front pinion spindle 150 - 350 mm︱distance pinion spindle - front crown gear spindle 120 - 340 mm︱control GE FANUC Series 160i-M70 mm︱pinion turning speeds max. 0 - 3.000 mm︱crown gear turning speeds max. 0 - 2.600 U/min︱inner taper pinion spindle Ø 99,2 mm︱inner tape crown gear spindle Ø 99,2 mm︱rated current 30 A︱weight of the machine ca. 6,40 t︱dimensions of the machine ca. 2,40 x 2,20 x 2,10 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 500 mm
            distance crown gear spindle - fr. 150 - 350 mm
            distance pinion spindle - front . 120 - 340 mm
            control GE FANUC Series 160i-M
            70 mm
            pinion turning speeds max. 0 - 3.000 mm
            crown gear turning speeds max. 0 - 2.600 U/min
            inner taper pinion spindle Ø 99,2 mm
            inner tape crown gear spindle Ø 99,2 mm
            rated current 30 A
            weight of the machine ca. 6,40 t
            dimensions of the machine ca. 2,40 x 2,20 x 2,10 m
            Description :
            Own lapping system!
            Was also operated at a lapping center


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine KLINGELNBERG LKR 400 A 100


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-490759 · Bevel Gear Lapping Machine

          KLINGELNBERG - LKR 400 A 100 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱
          K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 1
            min. module 10
            total power requirement 12 kW
            weight of the machine ca. 4,2 t
            Description :
            K L I N G E L N B E R G (Germany)
            Automatic Bevel Gear Lapping Machine
            Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
            Partially reconditioned and electrically modernized in 1998 by
            Welter Company
            _______________________________________________________
            Max. Ø of crown gear 400 mm
            Adjustment of pinion spindle 160 / 250 mm
            Adjustment of crown gear spindle 115 / 265 mm

            Additional movements:
            Axial / distance / vertical, approx. + / - 2 mm
            Automatic tooth clearance 0 - 0.6 mm
            Module 1 - 10
            Axial offset, up / down, each 50 mm
            (= axial offset travel from middle position)

            Bore hole of driving spindle 100 taper
            Bore hole of driven spindle 60 taper
            6 spindle speeds 900 - 1,800 rpm

            Total electrical load 12 kW - 380 V - 50 Hz
            Weight 4,200 kg

            Accessories / Special Features
            * Hydraulic workpiece clamping for both spindles.
            * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
            * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
            * Separate switch cabinet. * Separate hydraulic unit, etc.

            Price, ex stock EUR 29,500.--

            The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Spiral Bevel Gear Cutting Machine

          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18018 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - 840 C Siemens

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1 ︱Control 840 C Siemens︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1
            Control 840 C Siemens
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03108 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0/60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 1/min︱total power requirement 100 kW︱weight of the machine ca. 16700 kg︱dimensions of the machine ca. 5200x2300x2400 mm︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0/60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 1/min
            total power requirement 100 kW
            weight of the machine ca. 16700 kg
            dimensions of the machine ca. 5200x2300x2400 mm
            Description :



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17298 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - SINUMERIK 840 C

          Technical details
          max. wheel diameter 275 mm︱max. module 6 ︱min. module 1,5 ︱Control SINUMERIK 840 C ︱tooth width 5,5 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱ratio of transmission 1:10 ︱min. ratio of transmission 1:1 ︱work piece spindle speed max. 110 U/min︱blade head turning speeds 20 - 110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,20 x 2,30 x 2,40 m︱
          Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device
            max. wheel diameter 275 mm
            max. module 6
            min. module 1,5
            Control SINUMERIK 840 C
            tooth width 5,5 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 120
            min. number of teeth 5
            ratio of transmission 1:10
            min. ratio of transmission 1:1
            work piece spindle speed max. 110 U/min
            blade head turning speeds 20 - 110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
            Description :
            Internal deburring device U axis / Q spindle
            chip conveyor
            coolant device
            Electrostatic air purifier ELBARON

            no tools
            No workpiece clamping device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine OERLIKON SKM 1


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-90037 · Spiral Bevel Gear Cutting Machine

          OERLIKON - SKM 1 - - -

          Technical details
          max. wheel diameter 320 mm︱gear width 50 mm︱max. module 7,5 ︱min. module 2,1 ︱total power requirement 13 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 1,7 x 1,9 x 2,7 m︱
          Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through hole for spindle pieces 78 mm. Plunge max 20 mm. Feed rates for cutting, infinitely variable 0.04 - 25 mm/min. Distance taper tip/workpiece spindle... 100 - 345 mm. Distance taper centre/knife head axis 25 - 150 mm. Distance taper centre/milling head spindle... 80 - 220 mm. Max. disc wheel Ø with medium spiral angle... 320 mm. Max. Gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer bevel distance approx. 170 mm. Rapid traverse 1.5 m/min. Roller feeds in minutes from angle pe... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, outside 85 mm. Spindle speeds in standardised steps 40-250 rpm. Rotation around the machine centre axis 90º Ø max. gearbox 320 mm. Ø of spindle nose 130 mm Electrical properties Motor cooling capacity 1.2 Cv. Main motor power 10 Cv. Motor power chip conveyor 0.3 HP. Forward motor power 2 HP. Hydraulic motor power 2 HP. Total power 13 Kw. Voltage 220/380V.
            max. wheel diameter 320 mm
            gear width 50 mm
            max. module 7,5
            min. module 2,1
            total power requirement 13 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 1,7 x 1,9 x 2,7 m
            Description :
            Tooth width max. 50 mm
            Adjustment range for hypoid wheels (offset) +/- 60 mm.
            Through hole for spindle pieces 78 mm.
            Plunge max 20 mm.
            Feed rates for cutting, infinitely variable 0.04 - 25 mm/min.
            Distance taper tip/workpiece spindle... 100 - 345 mm.
            Distance taper centre/knife head axis 25 - 150 mm.
            Distance taper centre/milling head spindle... 80 - 220 mm.
            Max. disc wheel Ø with medium spiral angle... 320 mm.
            Max. Gear ratio 1 : 9.5
            Module 2.1 - 7.5
            Outer bevel distance approx. 170 mm.
            Rapid traverse 1.5 m/min.
            Roller feeds in minutes from angle pe... 0,3 - 20
            Spindle nose with short taper, inside 140 mm.
            Spindle nose with short taper, outside 85 mm.
            Spindle speeds in standardised steps 40-250 rpm.
            Rotation around the machine centre axis 90º
            Ø max. gearbox 320 mm.
            Ø of spindle nose 130 mm
            Electrical properties
            Motor cooling capacity 1.2 Cv.
            Main motor power 10 Cv.
            Motor power chip conveyor 0.3 HP.
            Forward motor power 2 HP.
            Hydraulic motor power 2 HP.
            Total power 13 Kw.
            Voltage 220/380V.


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          KLINGELNBERG - OERLIKON - GLEASON -