,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bevel Gear Lapping Machine

          Machinelist: Bevel Gear Lapping Machine


          Bevel Gear Lapping Machine

          used Gear cutting machines Bevel Gear Lapping Machine GLEASON 600 HTL


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18008 · Bevel Gear Lapping Machine

          GLEASON - 600 HTL - - 2007 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 600 mm︱pinion diameter - max. 254 mm︱crown gear turning speeds max. 3.100 U/min︱pinion turning speeds max. 3.100 U/min︱control GE FANUC Series 160i-M ︱pinion cone range 165-345 mm︱crown gear cone range 89 - 267 mm︱lapping torque 2 - 24 Nm︱total power requirement 36 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,80 x 2,40 x 1,90 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 600 mm
            pinion diameter - max. 254 mm
            crown gear turning speeds max. 3.100 U/min
            pinion turning speeds max. 3.100 U/min
            control GE FANUC Series 160i-M
            pinion cone range 165-345 mm
            crown gear cone range 89 - 267 mm
            lapping torque 2 - 24 Nm
            total power requirement 36 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1,80 x 2,40 x 1,90 m
            Description :
            Own lapping system!
            Was also operated at a lapping center



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine OERLIKON L 60


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18007 · Bevel Gear Lapping Machine

          OERLIKON - L 60 - - 2002 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 500 mm︱distance crown gear spindle - front pinion spindle 150 - 350 mm︱distance pinion spindle - front crown gear spindle 120 - 340 mm︱control GE FANUC Series 160i-M70 mm︱pinion turning speeds max. 0 - 3.000 mm︱crown gear turning speeds max. 0 - 2.600 U/min︱inner taper pinion spindle Ø 99,2 mm︱inner tape crown gear spindle Ø 99,2 mm︱rated current 30 A︱weight of the machine ca. 6,40 t︱dimensions of the machine ca. 2,40 x 2,20 x 2,10 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 500 mm
            distance crown gear spindle - fr. 150 - 350 mm
            distance pinion spindle - front . 120 - 340 mm
            control GE FANUC Series 160i-M
            70 mm
            pinion turning speeds max. 0 - 3.000 mm
            crown gear turning speeds max. 0 - 2.600 U/min
            inner taper pinion spindle Ø 99,2 mm
            inner tape crown gear spindle Ø 99,2 mm
            rated current 30 A
            weight of the machine ca. 6,40 t
            dimensions of the machine ca. 2,40 x 2,20 x 2,10 m
            Description :
            Own lapping system!
            Was also operated at a lapping center


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine KLINGELNBERG LKR 400 A 100


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-490759 · Bevel Gear Lapping Machine

          KLINGELNBERG - LKR 400 A 100 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱
          K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 1
            min. module 10
            total power requirement 12 kW
            weight of the machine ca. 4,2 t
            Description :
            K L I N G E L N B E R G (Germany)
            Automatic Bevel Gear Lapping Machine
            Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
            Partially reconditioned and electrically modernized in 1998 by
            Welter Company
            _______________________________________________________
            Max. Ø of crown gear 400 mm
            Adjustment of pinion spindle 160 / 250 mm
            Adjustment of crown gear spindle 115 / 265 mm

            Additional movements:
            Axial / distance / vertical, approx. + / - 2 mm
            Automatic tooth clearance 0 - 0.6 mm
            Module 1 - 10
            Axial offset, up / down, each 50 mm
            (= axial offset travel from middle position)

            Bore hole of driving spindle 100 taper
            Bore hole of driven spindle 60 taper
            6 spindle speeds 900 - 1,800 rpm

            Total electrical load 12 kW - 380 V - 50 Hz
            Weight 4,200 kg

            Accessories / Special Features
            * Hydraulic workpiece clamping for both spindles.
            * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
            * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
            * Separate switch cabinet. * Separate hydraulic unit, etc.

            Price, ex stock EUR 29,500.--

            The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Grinding Machine

          used Gear cutting machines Gear Grinding Machine STANEXIM SMG 405 GF3


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16587 · Gear Grinding Machine

          STANEXIM - SMG 405 GF3 - - neu/new -

          Technical details
          max. wheel diameter 400 mm︱gear width 200 mm︱max. module 10 ︱min. module 1 ︱profile depth 25 mm︱x-axis 630 mm︱y-axis 400 mm︱z-axis 190 mm︱U-axis 80 mm︱a- axis 360 °︱b-axis +/- 30 °︱max.helical angle 30 °︱grinding wheel diameter 250 - 350 mm︱spindle speeds (infinitely variable) 1500 - 2800 U/min︱grinding slide feeds 6000 mm/min︱center distance betw. workpiece-tool min/max. ︱pitch max. 9000 mm︱pitch min. 10 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 38 kW︱
          horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Paper Band Filter and magnetic Seperator - Swivel Reducer - Dressing Device - Tailstock with pneumatic clamping - Accurcy according to GOST 1643-81: 5 / DIN 5-6 SIEMENS control can be offered as an option
            max. wheel diameter 400 mm
            gear width 200 mm
            max. module 10
            min. module 1
            profile depth 25 mm
            x-axis 630 mm
            y-axis 400 mm
            z-axis 190 mm
            U-axis 80 mm
            a- axis 360 °
            b-axis +/- 30 °
            max.helical angle 30 °
            grinding wheel diameter 250 - 350 mm
            spindle speeds (infinitely varia. 1500 - 2800 U/min
            grinding slide feeds 6000 mm/min
            pitch max. 9000 mm
            pitch min. 10 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 38 kW
            Description :
            horizontal Profil Gear Grinding Machine for Spur and Helical External Gears.
            Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor
            Wheels. Equipped with:
            - CNC Control FANUC 0i-MF
            -- for 6 Controlled Axis (4 simultaneously)
            - Gear Measuring System
            - Chip and Sludge Removal System
            - Paper Band Filter and magnetic Seperator
            - Swivel Reducer
            - Dressing Device
            - Tailstock with pneumatic clamping
            - Accurcy according to GOST 1643-81: 5 / DIN 5-6

            SIEMENS control can be offered as an option


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine KAPP KX300P


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18020 · Gear Grinding Machine

          KAPP - KX300P - - 2012 -

          Technical details
          max. wheel diameter 300 mm︱gear width 320 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 45 °︱frequency 50 Hz︱voltage 400 V︱main fuse 125 A︱x-axis 270 mm︱y-axis 250 mm︱z-axis 320 mm︱A - axis +/- 45 °︱B - axis 360 °︱C-axis 360 °︱total power requirement 89 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Promot Automation "Cellmaster" (3 cells) year 2019
            max. wheel diameter 300 mm
            gear width 320 mm
            max. module 10
            min. module 0,5
            max.helical angle 45 °
            frequency 50 Hz
            voltage 400 V
            main fuse 125 A
            x-axis 270 mm
            y-axis 250 mm
            z-axis 320 mm
            A - axis +/- 45 °
            B - axis 360 °
            C-axis 360 °
            total power requirement 89 kW
            Description :
            automated
            Oil slinger station
            EWAB workpiece storage
            Hoffmann coolant filter system HSF 100 SE/K
            Minimax fire extinguishing system
            W+W air filter system
            Promot Automation "Cellmaster" (3 cells) year 2019



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZ 400


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23255 · Gear Grinding Machine

          REISHAUER - RZ 400 - - 2006 - Siemens 840 D

          Technical details
          max. wheel diameter 400 mm︱gear width 250 mm︱max. module 8 ︱min. module 0,5 ︱root circle diameter 10 mm︱number of teeth 5 - 999 ︱max.helical angle +/- 45 °︱weight 12.5 t︱control Siemens 840 D︱
          Machine is in very good condition, test reports available. CNC Siemens 840 D
            max. wheel diameter 400 mm
            gear width 250 mm
            max. module 8
            min. module 0,5
            root circle diameter 10 mm
            number of teeth 5 - 999
            max.helical angle +/- 45 °
            weight 12.5 t
            control Siemens 840 D
            Description :
            Machine is in very good condition, test reports available.
            CNC Siemens 840 D



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine GLEASON- PFAUTER P 1200 G


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24152 · Gear Grinding Machine

          GLEASON- PFAUTER - P 1200 G - - 2004 - Siemens 840D

          Technical details
          max. wheel diameter 1200 mm︱profile depth 80 mm︱radial slide travel 770 mm︱tangential adjustment 300 mm︱maximum axial offset 1000 mm︱pivoting angle +/- 45 Grad︱table diameter 800 mm︱table hole 182 mm︱spindle turning speed - stepless 1200 - 8000 U/min︱table turning speeds 0 - 10 U/min︱control Siemens 840D ︱total power requirement 80 kVA︱weight of the machine ca. 18 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Top condition, DIN 3 quality! Onboeard measuring system, filtering system.
            max. wheel diameter 1200 mm
            profile depth 80 mm
            radial slide travel 770 mm
            tangential adjustment 300 mm
            maximum axial offset 1000 mm
            pivoting angle +/- 45 Grad
            table diameter 800 mm
            table hole 182 mm
            spindle turning speed - stepless 1200 - 8000 U/min
            table turning speeds 0 - 10 U/min
            control Siemens 840D
            total power requirement 80 kVA
            weight of the machine ca. 18 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Top condition, DIN 3 quality!
            Onboeard measuring system, filtering system.



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZ 150


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23065 · Gear Grinding Machine

          REISHAUER - RZ 150 - - 2004 - Siemens 840 D

          Technical details
          max. wheel diameter 150 mm︱gear width 100 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 D ︱spindle turning speed - stepless 0 - 5200 U/min︱x-axis 190 mm︱y-axis 160 mm︱z-axis 100 mm︱work piece spindle speed 0 - 1000 U/min︱max.helical angle +/- 40 °︱total power requirement 36 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. 3,5 x 2,5 x 2,8 m︱
            max. wheel diameter 150 mm
            gear width 100 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 D
            spindle turning speed - stepless 0 - 5200 U/min
            x-axis 190 mm
            y-axis 160 mm
            z-axis 100 mm
            work piece spindle speed 0 - 1000 U/min
            max.helical angle +/- 40 °
            total power requirement 36 kW
            weight of the machine ca. 8,5 t
            dimensions of the machine ca. 3,5 x 2,5 x 2,8 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine LIEBHERR LCS 282


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-575487 · Gear Grinding Machine

          LIEBHERR - LCS 282 - - 1999 - LIEBHERR CNC

          Technical details
          max. wheel diameter 280 mm︱gear width 330 mm︱max. module 5 ︱min. module 1 ︱Control LIEBHERR CNC ︱total power requirement 28 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱
            max. wheel diameter 280 mm
            gear width 330 mm
            max. module 5
            min. module 1
            Control LIEBHERR CNC
            total power requirement 28 kW
            weight of the machine ca. 12 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine PFAUTER G 320 CNC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06153 · Gear Grinding Machine

          PFAUTER - G 320 CNC - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 330 mm︱gear width - mm︱max. module 7 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 72 kVA︱weight of the machine ca. 11,7 t︱dimensions of the machine ca. m︱
          We offer a Pfauter model G 320 gear grinding machine for sale numerical control on 8 axes for the machining of gears with straight and helical toothing, with rolled profile for enveloping cuts, the one Worm profile disc used. Technical specifications: CNC control Siemens 840 C Controlled axes: X Radial axis Y Tangential Shift Z Vertical axis A Workhead rotation B Worm rotation during processing C Table rotation U Radial axis dresser V Tangential axis dresser Module 0.5 – 7.0 Minimum workpiece diameter 10 mm Maximum workpiece diameter 330 mm Number of teeth 10 - 600 Vertical carriage thrust Z 200 mm Horizontal grinding wheel - carriage stroke X 230 mm Tangential slide stroke Y 135 mm Angle of rotation of clamping head A ± 45? Maximum equipment weight 600 N Tailstock center stroke 65 mm Grinding wheel speed 2700 rpm. Grinding wheel mass: Max / min diameter: 400 / 270 mm Width: 104mm Bore: 160mm Machine weight 11700 kg Built-in power (machine only) 72 KVA Voltage and frequency 400 volts x 50 Hz
            max. wheel diameter 330 mm
            gear width - mm
            max. module 7
            min. module 0,5
            Control Siemens 840 C
            total power requirement 72 kVA
            weight of the machine ca. 11,7 t
            Description :
            We offer a Pfauter model G 320 gear grinding machine for sale
            numerical control on 8 axes for the machining of gears with straight
            and helical toothing, with rolled profile for enveloping cuts, the one
            Worm profile disc used.

            Technical specifications:
            CNC control Siemens 840 C
            Controlled axes:
            X Radial axis
            Y Tangential Shift
            Z Vertical axis
            A Workhead rotation
            B Worm rotation during processing
            C Table rotation
            U Radial axis dresser
            V Tangential axis dresser

            Module 0.5 – 7.0
            Minimum workpiece diameter 10 mm
            Maximum workpiece diameter 330 mm
            Number of teeth 10 - 600
            Vertical carriage thrust Z 200 mm
            Horizontal grinding wheel - carriage stroke X 230 mm
            Tangential slide stroke Y 135 mm
            Angle of rotation of clamping head A ± 45?
            Maximum equipment weight 600 N
            Tailstock center stroke 65 mm
            Grinding wheel speed 2700 rpm.
            Grinding wheel mass:
            Max / min diameter: 400 / 270 mm
            Width: 104mm
            Bore: 160mm

            Machine weight 11700 kg
            Built-in power (machine only) 72 KVA
            Voltage and frequency 400 volts x 50 Hz


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZ 301 AS


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-507702 · Gear Grinding Machine

          REISHAUER - RZ 301 AS - - 1993 -

          Technical details
          max. wheel diameter 330 mm︱gear width 180 mm︱max. module 7 ︱min. module 0,5 ︱total power requirement 12 kW︱weight of the machine ca. 7500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 330 mm
            gear width 180 mm
            max. module 7
            min. module 0,5
            total power requirement 12 kW
            weight of the machine ca. 7500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZ301 S


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-373 · Gear Grinding Machine

          REISHAUER - RZ301 S - - 1991 - ---

          Technical details
          max. wheel diameter --- mm︱gear width --- mm︱max. module --- ︱min. module --- ︱Control --- ︱total power requirement --- kW︱weight of the machine ca. 5,0 t︱dimensions of the machine ca. --- m︱
            max. wheel diameter --- mm
            gear width --- mm
            max. module ---
            min. module ---
            Control ---
            total power requirement --- kW
            weight of the machine ca. 5,0 t
            dimensions of the machine ca. --- m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZP 200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-053024 · Gear Grinding Machine

          REISHAUER - RZP 200 - - 1986 -

          Technical details
          max. wheel diameter 0 mm︱gear width 120 mm︱max. module 3 ︱min. module 1 ︱total power requirement 20 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. m︱
          5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features * REISHAUER Electronic Control = Easy programming of workpiece parameters and grinding process. * Automatic workpiece handling system for shaft-formed parts, approx. 350 mm long, including hydraulic loading and unloading device. Fully automatic production is possible. * Profile correction is possible for height and width crowning. * Separate hydraulic unit. * Separate switch cabinet. * Fully automatic profiling with a swivable diamond gear mounted on a shaft corresponding to the workpiece. Dressing intervals can be preset, with compensation. Price, ex stock, each DM 245,000.-- These machines are very suitable for grinding tooth flanks on large series of helical gears, with or without profile modification at a minimum cost. Separate electronically controlled drive of grinding worm and workpiece results in high precision and good surface quality of gears. Constant speed is controlled by an angular decoder. Grinding infeed is possible for the full profile depth as well as by a preset additional forwards and backwards movement of workpiece. Both flanks are continuously meshed and ground. Profile corrections during dressing process are made by the same method (by a diamond gear corresponding to the workpiece). All functions are controlled by a microprocessor. Code numbers for various errors are displayed.
            gear width 120 mm
            max. module 3
            min. module 1
            total power requirement 20 kW
            weight of the machine ca. 7,5 t
            Description :
            5 machines in stock,
            YOM: between 1986 and 1990

            Gear Æ, min./max. 55 / 120 mm
            Gear Æ for shaft-formed parts 80 mm
            Module (pitch 25.4 - 8.5) 1 - 3
            No. of teeth, min./max. 13 / 80
            Pressure angle 14 - 30 °
            Helix angle, max. 40 °
            Workpiece clamping length 145 - 420 mm

            Grinding worm Æ 300 - 400 mm
            Grinding worm width 25 - 40 mm
            Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm
            Feed range 0.4 - 4 mm/rev

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight 7,500 kg

            Accessories / Special Features
            * REISHAUER Electronic Control = Easy programming of workpiece
            parameters and grinding process.
            * Automatic workpiece handling system for shaft-formed parts,
            approx. 350 mm long, including hydraulic loading and unloading
            device. Fully automatic production is possible.
            * Profile correction is possible for height and width crowning.
            * Separate hydraulic unit. * Separate switch cabinet.
            * Fully automatic profiling with a swivable diamond gear mounted
            on a shaft corresponding to the workpiece. Dressing intervals
            can be preset, with compensation.

            Price, ex stock, each DM 245,000.--

            These machines are very suitable for grinding tooth flanks on large
            series of helical gears, with or without profile modification at a
            minimum cost. Separate electronically controlled drive of grinding
            worm and workpiece results in high precision and good surface quality
            of gears. Constant speed is controlled by an angular decoder.
            Grinding infeed is possible for the full profile depth as well as by
            a preset additional forwards and backwards movement of workpiece.
            Both flanks are continuously meshed and ground. Profile corrections
            during dressing process are made by the same method (by a diamond
            gear corresponding to the workpiece). All functions are controlled by a
            microprocessor. Code numbers for various errors are displayed.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine KAPP VAS 482 CNC


          • KARAT Werkzeugmaschinen GmbH
          • Lily-Braun-Straße 45
          • 40699 Erkrath
          • Deutschland

          • 02104 / 138 59 30
            02104 / 138 59 31
          • info@karat-maschinen.de
            www.karat-maschinen.de
          #1097-10036 · Gear Grinding Machine

          KAPP - VAS 482 CNC - - 1986 -

          Technical details
          max. wheel diameter 300 mm︱gear width 700 mm︱max. module 12 ︱min. module ︱no. of teeth 1 - 999 ︱workpiece length - max. 700 mm︱x-axis 597 mm︱y-axis 183 mm︱a- axis 360 °︱b-axis 182 °︱max.helical angle +/-60 °︱taper diameter 40 mm︱grinding wheel diameter 200 mm︱workpiece diameter 300 mm︱spindle speeds (infinitely variable) 2000 - 10000 U/min︱grinding slide work strokes 550 mm︱grinding slide feeds 15000 mm/min︱center distance betw. workpiece-tool min/max. 200 ︱max.helical angle +/- 60 °︱pitch max. 9000 mm︱
          external gear ginding machine with OPTRONIC CNC model D 140 for X,Y,B,A
            max. wheel diameter 300 mm
            gear width 700 mm
            max. module 12
            no. of teeth 1 - 999
            workpiece length - max. 700 mm
            x-axis 597 mm
            y-axis 183 mm
            a- axis 360 °
            b-axis 182 °
            max.helical angle +/-60 °
            taper diameter 40 mm
            grinding wheel diameter 200 mm
            workpiece diameter 300 mm
            spindle speeds (infinitely varia. 2000 - 10000 U/min
            grinding slide work strokes 550 mm
            grinding slide feeds 15000 mm/min
            center distance betw. workpiece-. 200
            max.helical angle +/- 60 °
            pitch max. 9000 mm
            Description :
            external gear ginding machine with OPTRONIC CNC model D 140 for X,Y,B,A


        • KARAT Werkzeugmaschinen GmbH
        • Lily-Braun-Straße 45
        • 40699 Erkrath
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine KAPP VAS 482 CNC


          • KARAT Werkzeugmaschinen GmbH
          • Lily-Braun-Straße 45
          • 40699 Erkrath
          • Deutschland

          • 02104 / 138 59 30
            02104 / 138 59 31
          • info@karat-maschinen.de
            www.karat-maschinen.de
          #1097-10038 · Gear Grinding Machine

          KAPP - VAS 482 CNC - - 1986 -

          Technical details
          max. wheel diameter 300 mm︱gear width 700 mm︱max. module 12 ︱min. module ︱no. of teeth 1 - 999 ︱workpiece length - max. 700 mm︱x-axis 597 mm︱y-axis 183 mm︱a- axis 360 °︱b-axis 182 °︱max.helical angle +/-60 °︱taper diameter 40 mm︱grinding wheel diameter 200 mm︱workpiece diameter 300 mm︱spindle speeds (infinitely variable) 1250 - 6300 U/min︱grinding slide work strokes 550 mm︱grinding slide feeds 15000 mm/min︱center distance betw. workpiece-tool min/max. 200 ︱max.helical angle +/- 60 °︱pitch max. 9000 mm︱
          external gear ginding machine with OPTRONIC CNC model D 140 for X,Y,B,A
            max. wheel diameter 300 mm
            gear width 700 mm
            max. module 12
            no. of teeth 1 - 999
            workpiece length - max. 700 mm
            x-axis 597 mm
            y-axis 183 mm
            a- axis 360 °
            b-axis 182 °
            max.helical angle +/-60 °
            taper diameter 40 mm
            grinding wheel diameter 200 mm
            workpiece diameter 300 mm
            spindle speeds (infinitely varia. 1250 - 6300 U/min
            grinding slide work strokes 550 mm
            grinding slide feeds 15000 mm/min
            center distance betw. workpiece-. 200
            max.helical angle +/- 60 °
            pitch max. 9000 mm
            Description :
            external gear ginding machine with OPTRONIC CNC model D 140 for X,Y,B,A


        • KARAT Werkzeugmaschinen GmbH
        • Lily-Braun-Straße 45
        • 40699 Erkrath
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine HÖFLER H 1500


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01286 · Gear Grinding Machine

          HÖFLER - H 1500 - - 1983 -

          Technical details
          max. wheel diameter 1500 mm︱gear width 550 mm︱max. module 25 ︱min. module 2 ︱workpiece weight max. 6000 kg︱max. number of teeth 432 ︱min. number of teeth 12 ︱table diameter 990 mm︱grinding wheel size 400 mm︱total power requirement 75 kW︱weight of the machine ca. 20,5 t︱dimensions of the machine ca. m︱
          With tailstock max. wheel dia. 1250mm, without tailstock 1500mm
            max. wheel diameter 1500 mm
            gear width 550 mm
            max. module 25
            min. module 2
            workpiece weight max. 6000 kg
            max. number of teeth 432
            min. number of teeth 12
            table diameter 990 mm
            grinding wheel size 400 mm
            total power requirement 75 kW
            weight of the machine ca. 20,5 t
            Description :
            With tailstock max. wheel dia. 1250mm, without tailstock 1500mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine HOEFLER H 2500 / 1200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328981 · Gear Grinding Machine

          HOEFLER - H 2500 / 1200 - - 1980 -

          Technical details
          max. wheel diameter 2500 mm︱gear width 1200 mm︱max. module 32 ︱min. module 3 ︱total power requirement 25 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. m︱
          Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 2500 mm
            gear width 1200 mm
            max. module 32
            min. module 3
            total power requirement 25 kW
            weight of the machine ca. 60 t
            Description :
            Gear , min. / max. 180 / 2,500 mm
            Module 3 - 32
            Helix angle, max. 10 - 35 °

            Gear width for straight gears 1,200 mm
            Stroke length, approx. 100 - 1,200 mm
            No. of strokes 80 - 350 /min
            Stroke position adjustable 300 mm
            Stroke speed 4 - 40 mm

            Max. weight of workpiece, approx. 18,000 kg
            Min. / max. no. of teeth 16 / 576
            Table size x bore 1,400 x 500 mm

            Grinding wheel Ø, approx. 500 mm
            Grinding wheel peripheral speed 34 m/s

            Total electrical load, approx. 45 kW - 380 V - 50 Hz
            Weight of machine, approx. 60,000 kg

            Accessories / Special Features:
            * Hydrostatic guides in grinding slide, table and in all other guideways.
            * Completely covered working area with sliding doors.
            * Automatic grinding process for various cycles, with settings for roughing, finishing,
            fine finishing and automatic dressing cycle after preset number of teeth.
            * Profile correction is possible via appropriate dressing, as well as additional
            movement of grinding slide (depth and width crowning).
            * Approx. 50 change gears. * Grinding slideTilt display device.
            * Large coolant device with band filter and oil mist exhaust.
            * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit.


            Condition : Very good. Machine can soon be inspected in our showrooms.
            It is not under power at present.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6.
            Grinding diagrams are available. This type and quality of machine is rarely available.

            Thank you for your interest. We always have a good selection of gear machines available.
            Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine Kownatzki-Reishauer RKZ 400


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2897 · Gear Grinding Machine

          Kownatzki-Reishauer - RKZ 400 - - 1979 - CNC Dialog

          Technical details
          max. wheel diameter 400 mm︱gear width 200 mm︱max. module 10 ︱min. module 2 ︱control CNC Dialog ︱total power requirement 12 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4,2x3x2,2 m︱
          We have 2 machines of this type in stock 1 machine with CNC dresser and flanges and discs https://youtu.be/sfYoDruvwYY
            max. wheel diameter 400 mm
            gear width 200 mm
            max. module 10
            min. module 2
            control CNC Dialog
            total power requirement 12 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 4,2x3x2,2 m
            Description :
            We have 2 machines of this type in stock
            1 machine with CNC dresser and flanges and discs
            https://youtu.be/sfYoDruvwYY


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine Kownatzki-Reishauer RKZ 400


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2948 · Gear Grinding Machine

          Kownatzki-Reishauer - RKZ 400 - - 1979 - CNC Dialog

          Technical details
          max. wheel diameter 400 mm︱gear width 200 mm︱max. module 10 ︱min. module 2 ︱control CNC Dialog ︱total power requirement 12 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4,2x3x2,2 m︱
          We have 2 machines of this type in stock Machine with CNC dresser and flanges and discs https://youtu.be/sfYoDruvwYY
            max. wheel diameter 400 mm
            gear width 200 mm
            max. module 10
            min. module 2
            control CNC Dialog
            total power requirement 12 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 4,2x3x2,2 m
            Description :
            We have 2 machines of this type in stock
            Machine with CNC dresser and flanges and discs
            https://youtu.be/sfYoDruvwYY


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine KAPP VAs 433


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0197 · Gear Grinding Machine

          KAPP - VAs 433 - - -

          Technical details
          max. wheel diameter . mm︱gear width . mm︱max. module . ︱min. module ︱Control ︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          specifications Max. Grinding length (mm) 500 Max. Grinding diameter (mm) Ø 300 Speed 5,000 - 25,000 kW 15 Voltage 380V Hertz 50 Including: Max. auto feed 15.000 mm/min Max. feed carriage 21.700 mm /min Angle grinding head 0 - 55 degrees Helical pitch 10 - 90.000 mm Max. positioning movement of grinding head 10 mm
            max. wheel diameter . mm
            gear width . mm
            max. module .
            total power requirement 15 kW
            Description :

            specifications
            Max. Grinding length (mm) 500
            Max. Grinding diameter (mm) Ø 300
            Speed 5,000 - 25,000
            kW 15
            Voltage 380V
            Hertz 50



            Including:

            Max. auto feed 15.000 mm/min
            Max. feed carriage 21.700 mm /min
            Angle grinding head 0 - 55 degrees
            Helical pitch 10 - 90.000 mm
            Max. positioning movement of grinding head 10 mm



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine KAPP VAS 433


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11770IM · Gear Grinding Machine

          KAPP - VAS 433 - - -

          Technical details
          max. wheel diameter 300 mm︱Control ︱workpiece length - max. 700 mm︱travel 550 mm︱feed 15000 m/min︱grinding head - incline 0 - 55 °︱helical lead min./max. 10 - 90000 mm︱grinding wheel speeds 5000 - 25000 U/min︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            max. wheel diameter 300 mm
            workpiece length - max. 700 mm
            travel 550 mm
            feed 15000 m/min
            grinding head - incline 0 - 55 °
            helical lead min./max. 10 - 90000 mm
            grinding wheel speeds 5000 - 25000 U/min
            total power requirement 15 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          OERLIKON - GLEASON - KLINGELNBERG -