,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Gear cutting machines

          Machinelist: Gear cutting machines


          Bevel Gear Grinding Machine

          used Gear cutting machines Bevel Gear Grinding Machine GLEASON PHOENIX  200 HG


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328540 · Bevel Gear Grinding Machine

          GLEASON - PHOENIX 200 HG - - 1997 -

          Technical details
          max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱
          Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 215 mm
            gear width 40,65 mm
            total power requirement 20 kW
            weight of the machine ca. 10 t
            Description :
            Max. external Ø of workpiece 215 mm
            Tooth profile, height x width 16 x 40.65 mm
            No. of teeth 5 - 200
            Max. tooth ratio 1 : 10

            Grinding wheel Ø 51 - 190 mm
            Grinding wheel speeds 1,000 - 6,000 rpm

            X Axis (horizontal) 152 mm
            Y Axis (vertical) 178 mm
            Z Axis (slide base plate) 304 mm
            Distance from middle of machine to middle of workspindle 115 mm
            Axial speed 125 mm/sec
            Workpiece speeds 0 - 30 rpm

            Workspindle bore, conical 3 29/32 inch

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features

            * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
            * Extensive coolant equipment with filter system, band filter, etc.
            * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
            * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.


            Condition : Very good - machine can be inspected here under power
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 120 / 888 W


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-304112 · Bevel Gear Grinding Machine

          GLEASON - 120 / 888 W - - 1980 -

          Technical details
          max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
          Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
            max. wheel diameter 1010 mm
            total power requirement 15 kW
            weight of the machine ca. 9,5 t
            Description :
            Max. depth of tooth 10 mm
            Max. workpiece Ø (for clearance) 1,010 mm
            Max. external Ø of coupling 610 mm

            Sliding base withdraw 216 mm
            Max. distance from grinding wheel to workpiece nose 90 - 430 mm
            Max. weight of workpiece, including clamp 500 kg

            No. of teeth 32 to 150

            Grinding wheel Ø, approx 152 - 320 mm
            Grinding wheel speeds, infinitely variable 0 - 3,600 rpm

            Work spindle bore 60 mm

            Total electrical load, approx. 15 kW - 380 V - 50 Hz
            Weight, approx. 9,500 kg

            Accessories / Special Features
            * Automatic roughing and finishing process via pre-settable counter and
            built-in feed cam.
            * Counter for number of teeth.
            * Counter for number of dressing cycles.
            * 2 built-on dressing units with three dressing diamonds for radius dressing,
            side dressing and wheel end dressing.
            * Built-on index plate for 48 teeth.
            * Separate coolant device with band filter.
            * Separate hydraulic unit.
            * Separate TRION oil mist exhaust.
            * Various small parts.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Lapping Machine

          used Gear cutting machines Bevel Gear Lapping Machine KLINGELNBERG LKR 400 A 100


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-490759 · Bevel Gear Lapping Machine

          KLINGELNBERG - LKR 400 A 100 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱
          K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 1
            min. module 10
            total power requirement 12 kW
            weight of the machine ca. 4,2 t
            Description :
            K L I N G E L N B E R G (Germany)
            Automatic Bevel Gear Lapping Machine
            Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
            Partially reconditioned and electrically modernized in 1998 by
            Welter Company
            _______________________________________________________
            Max. Ø of crown gear 400 mm
            Adjustment of pinion spindle 160 / 250 mm
            Adjustment of crown gear spindle 115 / 265 mm

            Additional movements:
            Axial / distance / vertical, approx. + / - 2 mm
            Automatic tooth clearance 0 - 0.6 mm
            Module 1 - 10
            Axial offset, up / down, each 50 mm
            (= axial offset travel from middle position)

            Bore hole of driving spindle 100 taper
            Bore hole of driven spindle 60 taper
            6 spindle speeds 900 - 1,800 rpm

            Total electrical load 12 kW - 380 V - 50 Hz
            Weight 4,200 kg

            Accessories / Special Features
            * Hydraulic workpiece clamping for both spindles.
            * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
            * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
            * Separate switch cabinet. * Separate hydraulic unit, etc.

            Price, ex stock EUR 29,500.--

            The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Testing Machine

          used Gear cutting machines Bevel Gear Testing Machine GLEASON 513


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-385316 · Bevel Gear Testing Machine

          GLEASON - 513 - - 1975 -

          Technical details
          max. wheel diameter 400 mm︱gear width 0 mm︱module ︱pinion diameter - max. 254 mm︱axial cross angle 90 °︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            max. wheel diameter 400 mm
            pinion diameter - max. 254 mm
            axial cross angle 90 °
            total power requirement 15 kW
            Description :
            G L E A S O N (USA)
            Hypoid Spiral Bevel Gear Running Testing Machine
            Model 513 TESTER, Year 1975, Serial No. 721607

            This machine is very suitable for precision production testing of spiral and
            hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and
            the pinion spindle is horizontal.
            The pinion cone distance can be adjusted while the machine is working in
            order to find the optimal mounting position whereby the gear is "loaded"
            with a preset torque.
            The axial pinion position can be adjusted until the quietest meshing position
            of the traction flank is found. Likewise, the thrust flank can be tested
            during the return run.
            Marking compound is sprayed on both sides of the teeth so the flank contact
            pattern can be seen. Working cycles, as well as the positioning in the
            tooth gap, are automatic. The gear quality can be assessed by recording the
            harmonic frequencies, which are displayed on a separate monitor and which
            can be analyzed with a RHF Control. Machine can be used for soft testing of
            production parts, as well as for mating sets of hardened gears and pinions
            prior to lapping, and for final testing after lapping to select the optimum
            pinion mounting distance. Also ideal for lab work, processing, and quality
            control.

            Max. gear outside diameter, approx. 508 mm
            Max. pinion outside diameter, approx. 254 mm
            Axial cross angle 90 °
            Offset of pinion spindle above/below gear spindle, max. 102 mm
            Diameter of taper hole, pinion spindle 99/95 mm
            Diameter of taper hole, gear spindle 56/55 mm
            Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
            Speeds of gear spindle, infinitely variable 0 - 1,250 rpm

            Spindle drive, approx. 5 / 7.5 kW
            Total electrical load, approx. 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            * Large display for 1 / 2 / 3 harmonies, display for pinion distance,
            pinion speed, as well of gear torque in kg/torque, etc.
            * Hydraulic workpiece clamping. * Hydraulic slide clamping.
            * Tank for marking compound with mixer and pump, separate.
            * Separate switch cabinet. * Separate hydraulic unit.
            * Lots of spare parts, spare motors, etc.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Chamfering and Deburring Machine

          used Gear cutting machines Chamfering and Deburring Machine HURTH ZK 200/1-TE CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-341998b · Chamfering and Deburring Machine

          HURTH - ZK 200/1-TE CNC - - 1991 -

          Technical details
          max. wheel diameter 0 mm︱max. number of teeth 0 ︱max. module ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC controlled milling machine for synchronous rings
            Description :
            CNC controlled milling machine for synchronous rings


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Chamfering and Deburring Machine PRÄWEMA W 2 - 1 SYNCHROFORM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-347971 · Chamfering and Deburring Machine

          PRÄWEMA - W 2 - 1 SYNCHROFORM - - 1991 -

          Technical details
          max. wheel diameter 400 mm︱max. number of teeth 150 ︱max. module 5 ︱total power requirement 16 kW︱weight of the machine ca. 10 t︱
          Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.
            max. wheel diameter 400 mm
            max. number of teeth 150
            max. module 5
            total power requirement 16 kW
            weight of the machine ca. 10 t
            Description :
            Workpiece Ø, min./max. 30 - 400 mm
            Number of teeth 6 - 150
            Module range, max. 5

            Tool holder shaft Ø SK 30 / 20
            Tool speeds 4,000 rpm
            Spindle drive max. infinitely variable 1.8 kW
            Feeds, longitudinal and cross 0.001 - 12 m/min
            Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm
            Workspindle slide 400 mm
            Tool speed, max. 3,000 rpm
            Tool holder SK 30

            Total electrical load, approx. 16 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
            * 2 workspindle units, left and right, which can be set at any angle.
            * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide.
            * L and O Axes for milling spindle. C Axis for workspindle rotation.
            * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control.
            * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air.
            * Coolant equipment with chip conveyor.
            * Noise protection cabin. * Central lubrication.
            * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc.


            The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available on stock.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Chamfering and Deburring Machine HURTH ZK 7


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-555393 · Chamfering and Deburring Machine

          HURTH - ZK 7 - - 1975 -

          Technical details
          max. wheel diameter 280 mm︱max. number of teeth 100 ︱max. module 6 ︱min. module 1 ︱total power requirement 6 kW︱weight of the machine ca. 2500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 280 mm
            max. number of teeth 100
            max. module 6
            min. module 1
            total power requirement 6 kW
            weight of the machine ca. 2500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Cold Rolling Machine

          used Gear cutting machines Cold Rolling Machine EX-CELL-O XK 225


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-346254 · Cold Rolling Machine

          EX-CELL-O - XK 225 - - 1987 -

          Technical details
          rolling capacity max. NA t︱workpiece diameter 38 mm︱workpiece length 500 mm︱total power requirement 24 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
          Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            rolling capacity max. NA t
            workpiece diameter 38 mm
            workpiece length 500 mm
            total power requirement 24 kW
            weight of the machine ca. 10 t
            Description :
            Max.Ø tool slide stroke 760 mm
            Max.Ø rack length 610 mm

            Length of workpiece between centres, approx. 500 mm
            Max. tooth width / profile width 92 mm
            Max. workpiece Ø 38 mm
            Tailstock stroke on outboard support, hydraulic, approx. 500 mm

            Module range 0.3 - 1.3

            Total electrical load, approx. 24 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
            * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
            * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
            * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.

            Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.




            Condition : Very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Grinding Machine

          used Gear cutting machines Gear Grinding Machine LIEBHERR LCS 282


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-575487 · Gear Grinding Machine

          LIEBHERR - LCS 282 - - 1999 - LIEBHERR CNC

          Technical details
          max. wheel diameter 280 mm︱gear width 330 mm︱max. module 5 ︱min. module 1 ︱Control LIEBHERR CNC ︱total power requirement 28 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱
            max. wheel diameter 280 mm
            gear width 330 mm
            max. module 5
            min. module 1
            Control LIEBHERR CNC
            total power requirement 28 kW
            weight of the machine ca. 12 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZ 301 AS


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-507702 · Gear Grinding Machine

          REISHAUER - RZ 301 AS - - 1993 -

          Technical details
          max. wheel diameter 330 mm︱gear width 180 mm︱max. module 7 ︱min. module 0,5 ︱total power requirement 12 kW︱weight of the machine ca. 7500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 330 mm
            gear width 180 mm
            max. module 7
            min. module 0,5
            total power requirement 12 kW
            weight of the machine ca. 7500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine REISHAUER RZP 200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-053024 · Gear Grinding Machine

          REISHAUER - RZP 200 - - 1986 -

          Technical details
          max. wheel diameter 0 mm︱gear width 120 mm︱max. module 3 ︱min. module 1 ︱total power requirement 20 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. m︱
          5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features * REISHAUER Electronic Control = Easy programming of workpiece parameters and grinding process. * Automatic workpiece handling system for shaft-formed parts, approx. 350 mm long, including hydraulic loading and unloading device. Fully automatic production is possible. * Profile correction is possible for height and width crowning. * Separate hydraulic unit. * Separate switch cabinet. * Fully automatic profiling with a swivable diamond gear mounted on a shaft corresponding to the workpiece. Dressing intervals can be preset, with compensation. Price, ex stock, each DM 245,000.-- These machines are very suitable for grinding tooth flanks on large series of helical gears, with or without profile modification at a minimum cost. Separate electronically controlled drive of grinding worm and workpiece results in high precision and good surface quality of gears. Constant speed is controlled by an angular decoder. Grinding infeed is possible for the full profile depth as well as by a preset additional forwards and backwards movement of workpiece. Both flanks are continuously meshed and ground. Profile corrections during dressing process are made by the same method (by a diamond gear corresponding to the workpiece). All functions are controlled by a microprocessor. Code numbers for various errors are displayed.
            gear width 120 mm
            max. module 3
            min. module 1
            total power requirement 20 kW
            weight of the machine ca. 7,5 t
            Description :
            5 machines in stock,
            YOM: between 1986 and 1990

            Gear Æ, min./max. 55 / 120 mm
            Gear Æ for shaft-formed parts 80 mm
            Module (pitch 25.4 - 8.5) 1 - 3
            No. of teeth, min./max. 13 / 80
            Pressure angle 14 - 30 °
            Helix angle, max. 40 °
            Workpiece clamping length 145 - 420 mm

            Grinding worm Æ 300 - 400 mm
            Grinding worm width 25 - 40 mm
            Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm
            Feed range 0.4 - 4 mm/rev

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight 7,500 kg

            Accessories / Special Features
            * REISHAUER Electronic Control = Easy programming of workpiece
            parameters and grinding process.
            * Automatic workpiece handling system for shaft-formed parts,
            approx. 350 mm long, including hydraulic loading and unloading
            device. Fully automatic production is possible.
            * Profile correction is possible for height and width crowning.
            * Separate hydraulic unit. * Separate switch cabinet.
            * Fully automatic profiling with a swivable diamond gear mounted
            on a shaft corresponding to the workpiece. Dressing intervals
            can be preset, with compensation.

            Price, ex stock, each DM 245,000.--

            These machines are very suitable for grinding tooth flanks on large
            series of helical gears, with or without profile modification at a
            minimum cost. Separate electronically controlled drive of grinding
            worm and workpiece results in high precision and good surface quality
            of gears. Constant speed is controlled by an angular decoder.
            Grinding infeed is possible for the full profile depth as well as by
            a preset additional forwards and backwards movement of workpiece.
            Both flanks are continuously meshed and ground. Profile corrections
            during dressing process are made by the same method (by a diamond
            gear corresponding to the workpiece). All functions are controlled by a
            microprocessor. Code numbers for various errors are displayed.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine HOEFLER H 2500 / 1200


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328981 · Gear Grinding Machine

          HOEFLER - H 2500 / 1200 - - 1980 -

          Technical details
          max. wheel diameter 2500 mm︱gear width 1200 mm︱max. module 32 ︱min. module 3 ︱total power requirement 25 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. m︱
          Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 2500 mm
            gear width 1200 mm
            max. module 32
            min. module 3
            total power requirement 25 kW
            weight of the machine ca. 60 t
            Description :
            Gear , min. / max. 180 / 2,500 mm
            Module 3 - 32
            Helix angle, max. 10 - 35 °

            Gear width for straight gears 1,200 mm
            Stroke length, approx. 100 - 1,200 mm
            No. of strokes 80 - 350 /min
            Stroke position adjustable 300 mm
            Stroke speed 4 - 40 mm

            Max. weight of workpiece, approx. 18,000 kg
            Min. / max. no. of teeth 16 / 576
            Table size x bore 1,400 x 500 mm

            Grinding wheel Ø, approx. 500 mm
            Grinding wheel peripheral speed 34 m/s

            Total electrical load, approx. 45 kW - 380 V - 50 Hz
            Weight of machine, approx. 60,000 kg

            Accessories / Special Features:
            * Hydrostatic guides in grinding slide, table and in all other guideways.
            * Completely covered working area with sliding doors.
            * Automatic grinding process for various cycles, with settings for roughing, finishing,
            fine finishing and automatic dressing cycle after preset number of teeth.
            * Profile correction is possible via appropriate dressing, as well as additional
            movement of grinding slide (depth and width crowning).
            * Approx. 50 change gears. * Grinding slideTilt display device.
            * Large coolant device with band filter and oil mist exhaust.
            * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit.


            Condition : Very good. Machine can soon be inspected in our showrooms.
            It is not under power at present.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6.
            Grinding diagrams are available. This type and quality of machine is rarely available.

            Thank you for your interest. We always have a good selection of gear machines available.
            Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing and Shaping Mach. -combined

          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined PFAUTER PA 300 SHOBBER


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-425442 · Gear Hobbing and Shaping Mach. -combined

          PFAUTER - PA 300 SHOBBER - - 1979 -

          Technical details
          max. wheel diameter 350 mm︱gear width 350 mm︱max. module 8 ︱min. module ︱total power requirement 7,5 - 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Gear hobber with gear shaping device, 2-cut cycle
            max. wheel diameter 350 mm
            gear width 350 mm
            max. module 8
            total power requirement 7,5 - 22 kW
            Description :
            Gear hobber with gear shaping device, 2-cut cycle


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 35/36 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-473370a · Gear Hobbing Machine - Horizontal

          MIKRON - A 35/36 CNC - - 1992 -

          Technical details
          max. wheel diameter 150 mm︱gear width 300 mm︱max. module 4,5 ︱min. module ︱total power requirement 20 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            max. wheel diameter 150 mm
            gear width 300 mm
            max. module 4,5
            total power requirement 20 kW
            weight of the machine ca. 6 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-448351 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/1 - - 1985 -

          Technical details
          max. wheel diameter 80 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱
          M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.
            max. wheel diameter 80 mm
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg
            Description :
            M I K R O N (Switzerland)
            Fully Automatic Gear Hobber for Worm Gears
            Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
            ____________________________________________________________

            max. gear- without feed magazine approx. 80 mm
            max. gear- with feed magazine approx. 50 mm
            Module max. 2, / 2,5

            Axial milling length approx. 150 mm
            max. workpiece-mounting length approx. 200 mm

            Milling slide can be swivelled up to 90 degrees
            Milling cutter - 24 - 50/63 mm
            Max. radial distance of milling slide 0-14/18 mm
            Milling cutter adjustment max. 25 mm
            Milling cutter speed 212 - 2.000 rpm

            Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
            radial infinitely adjustable 0,2 - 200 mm/min.

            Milling spindle drive 3 kW
            Total electrical load approx. 10 kW - 50 Hz - 380 Volt
            Weight approx. 2.400 kg

            Accessories/Special Features:
            " Fully automatic operation cycle and minimum idle times due to programmable
            SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
            for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
            including 30 different numeric error displays
            Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
            loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
            the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
            The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
            The whole process is electrically monitored and checked.
            The complete loading facility is encased by plexiglass.
            " Hydraulic work piece clamping device including collets and hydraulic ejector
            " separate cooling system with magnetic separator * separate hydraulic system * various change gears

            This machine is set up for worm gears/armature shafts that can be used for adjustable
            car seats, window lifters, etc.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/0


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-482607 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/0 - - 1982 -

          Technical details
          max. wheel diameter 0 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱dimensions of the machine ca. m︱
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear cutting machines Gear Hobbing Machine - Vertical LIEBHERR LC 82


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-685908 · Gear Hobbing Machine - Vertical

          LIEBHERR - LC 82 - - 1995 - SIEMENS 840 C

          Technical details
          max. wheel diameter 80 mm︱gear width 120 mm︱max. module 3 ︱min. module 1 ︱control SIEMENS 840 C ︱total power requirement 30 kW︱weight of the machine ca. 7500 t︱dimensions of the machine ca. m︱
          L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            max. wheel diameter 80 mm
            gear width 120 mm
            max. module 3
            min. module 1
            control SIEMENS 840 C
            total power requirement 30 kW
            weight of the machine ca. 7500 t
            Description :
            L I E B H E R R
            CNC – Controlled Gear Hobbing Machine
            Type LC 82
            Baujahr 1995 Ser.-Nr. 0836
            ______________________________________________________

            Gear-Diam. max. 80 mm
            Module Range 1 - 3
            Helix Angle +/- 45 °

            Distance Table Center to Tool Center 15 – 160 mm
            Hobbing Head Slide stroke vertical 250 mm
            Tangential Travel / Shift Travel of Tool slide 180 mm
            Minimum Number of Teeth 3 (!)
            Hob Size max. Ø x length approx. 90 - 200 mm
            Taper of Hob spindle HSK 50 A

            Workpiece Clamping length (table/Tailstock) 250 mm
            Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev.
            Hob speed steplessly adjustable 0 – 800 rpm

            Hob Spindle Drive 8 kW -
            Total Load approx. 30 kW - 400 V – 50 Hz
            Total weight of Machine approx. 7.500 kg

            Special attachments / accessories:

            • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/
            swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a
            surface especially designed for the gear manufacturing with error display
            function.
            • Automatic and contactless tooth meshing device to adjust the hob into
            workpiece.
            • Automatic Shifting of hob slide.
            • Automatic Workpiece handling system Model SSL for high speed loading and
            unloading of Workpieces, consisting of a steel chain3,, for workpiece
            carriers and 3-fold WP-Gripper for blanks,
            for the machining position and for unloading of finished parts onto the
            steel band.
            Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix
            gear sprocket.
            Clamping of workpiece between centers by a mechanical, cam controlled quill
            in tailstock.
            • complete workarea protection with one sliding door, chip conveyor, small
            coolant device, oil dust
            Absorber, WP Carrier, etc.
            The Machine can be also used for dry cutting.

            Condition : Satisfactory to Good . Machine can be inspected under power here
            in stock.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical LORENZ F 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-693110 · Gear Hobbing Machine - Vertical

          LORENZ - F 400 - - 1977 -

          Technical details
          max. wheel diameter 400 mm︱gear width 280 mm︱max. module 1 ︱min. module 4 ︱total power requirement 15 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 280 mm
            max. module 1
            min. module 4
            total power requirement 15 kW
            weight of the machine ca. 6000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 900


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-688537 · Gear Hobbing Machine - Vertical

          PFAUTER - P 900 - - 1970 -

          Technical details
          max. wheel diameter 900 mm︱gear width 500 mm︱max. module 1 ︱min. module 10 ︱total power requirement 16 kW︱weight of the machine ca. 8.500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 900 mm
            gear width 500 mm
            max. module 1
            min. module 10
            total power requirement 16 kW
            weight of the machine ca. 8.500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 1800


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-597315 · Gear Hobbing Machine - Vertical

          PFAUTER - P 1800 - - 1966 -

          Technical details
          max. wheel diameter 1800 mm︱gear width 735 mm︱max. module 12 ︱min. module 1 ︱total power requirement 30 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. m︱
            max. wheel diameter 1800 mm
            gear width 735 mm
            max. module 12
            min. module 1
            total power requirement 30 kW
            weight of the machine ca. 23 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Honing Machine

          used Gear cutting machines Gear Honing Machine REISHAUER RZR


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-309529 · Gear Honing Machine

          REISHAUER - RZR - - 1996 -

          Technical details
          workpiece diameter 240 mm︱centre distance 0 mm︱honing length max. 500 mm︱max. module 5 ︱total power requirement 12 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
            workpiece diameter 240 mm
            honing length max. 500 mm
            max. module 5
            total power requirement 12 kW
            weight of the machine ca. 5000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Honing Machine FÄSSLER D - 250 / H5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-0337091 · Gear Honing Machine

          FÄSSLER - D - 250 / H5 - - 1983 -

          Technical details
          workpiece diameter 250 mm︱centre distance 0 mm︱honing length max. mm︱max. module 5
          Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.
            workpiece diameter 250 mm
            max. module 5
            Description :
            Gear Ø, min./max. 10 / 250 mm
            Module range 1 - 5
            Length of teeth / max. table stroke 500 mm
            Height of centres of tailstocks 220 mm

            Max. weight of workpiece 50 / 100 kg
            Honing head swivelling +/- 35 °

            Speeds of honing tool 20 - 500 rpm
            Size of honing tool, Ø x width 300 x 40 mm

            Workpiece speeds 500 - 3,000 rpm
            Total adjustment of cross slide 270 mm
            Rapid traverse of cross slide 50 mm
            Infeed travel of cross slide, mechanical 1 - 8 mm/Ø
            Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec

            Table speeds, hydraulic 0 - 6 m/min

            Total electrical load 5.5 kW - 380 V - 50 Hz
            Weight 3,200 kg

            Accessories / Special Features
            * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter.
            * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc.
            * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped).
            * Separate honing oil unit with magnetic separator and fine filter.
            * Mechanical tailstocks for manual loading. * Oil mist separator.
            * Sliding doors with foot switch. * Separate hydraulic unit.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            We have a large selection of gear machines available. Please let us know your requirements.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine LORENZ LS 150


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-354158 · Gear Shaping Machine

          LORENZ - LS 150 - - 1980 -

          Technical details
          max. wheel diameter 150 mm︱gear width 42 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement 10 kW︱weight of the machine ca. 6 t︱
          External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features * Built-in hydrostatic straight guide. * Built-in raiser plate for raising the shaper head 130 mm. * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock. * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps. * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished. * Separate switch and control cabinet. * Separate hydraulic unit. * Coolant equipment with chip conveyor and chip collection. * Vibration elements. * Various change gears. * Holders for shaper tools. * Completely covered working area, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 150 mm
            gear width 42 mm
            max. module 3
            min. module 0,5
            total power requirement 10 kW
            weight of the machine ca. 6 t
            Description :
            External gears, max. Ø 150 mm (or more)
            Internal gears, max workpiece Ø, approx. 280 mm
            Gear width, max. 42 mm
            Module, max. 0.5 - 3

            Length of stroke 0 - 50 mm
            Adjustment of stroke 0 - 70 mm
            Distance between shaper spindle and body of machine 250 mm
            Spindle internal table, approx. 45 mm
            Strokes, roughing / finishing 450 - 1,250 / 2,500 / min

            Table Ø 250 mm
            Table bore 100 mm
            Distance between table and shaper head, approx. 320 mm
            Axial travel of workpiece slide, approx. 285 mm

            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Rotary feed 0.125 - 3,150 mm/stroke

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight 6,000 kg

            Accessories / Special Features
            * Built-in hydrostatic straight guide.
            * Built-in raiser plate for raising the shaper head 130 mm.
            * Hydraulic counter bracket (height-adjustable tailstock, approx. 150 mm) and hydraulic universal workpiece clamping device in the table for workpieces with length of up to approx. 400 mm, probably more by reversing the tailstock.
            * Automatic change of number of strokes and automatic feed change for roughing and finishing work, in up to 7 steps.
            * Automatic and motor-driven shaper stroke fixing in the upper position after work is finished.
            * Separate switch and control cabinet. * Separate hydraulic unit.
            * Coolant equipment with chip conveyor and chip collection. * Vibration elements.
            * Various change gears. * Holders for shaper tools. * Completely covered working area, etc.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-537237 · Gear Shaping Machine

          LORENZ - LS 400 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width 75 mm︱max. module 0,5 ︱min. module 60 ︱total power requirement 25 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. m︱
          L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _________________________________________________________________________________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.
            max. wheel diameter 400 mm
            gear width 75 mm
            max. module 0,5
            min. module 60
            total power requirement 25 kW
            weight of the machine ca. 7 t
            Description :
            L O R E N Z (Germany)
            High Performance Automatic Gear Shaper
            Model LS 400 Year 1975 Serial No. 12 592
            _________________________________________________________________________________

            External gear, max. Ø 400 mm (possibly larger)
            Internal gear dia. 350 mm
            Gear width, max. 75 mm
            Module range 0.5 - 6

            Length of stroke 82 mm
            Adjustment of stroke position 0 - 100 mm
            Distance between shaper spindle and machine body 250 mm
            Spindle taper MK 5
            No. of strokes, roughing/finishing process 118 - 1,000 per min

            Table size 400 mm
            Table bore 125 mm
            Mounting height between table and shaper head 190 / 290 mm
            Axial travel of tool slide, approx. 295 mm

            No. of teeth, approx. 12-150
            Feed range, tooth depth 0.01 - 0.063 mm/stroke
            Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke

            Spindle drive, approx. 19 kW
            Total electrical load, approx. 25 kW - 380 V - 50 Hz
            Weight 7,000 kg

            Accessories / Special Features
            * Hydrostatic straight guides with separate hydraulic aggregate.
            * Built-in raiser plate approx. 100 mm to increase height of shaper head.
            * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp
            ring shaped workpieces on the inner diameter with various inserts to accommodate
            different workpiece diameters.
            * Stepless Regulation of number of strokes for improving roughing and finishing process
            * Automatic changeover of number of strokes, and automatic feed changeover for roughing
            and finishing work in up to 3 cuts.
            * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished.
            * Separate switch and control cabinet. Two-hand start.
            * Coolant equipment with magnetic chip conveyor and chip collection container.
            * Various change gears, shaping tool holders, etc.

            Condition : Satisfactory to Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines on stock.
            Please let us know what you need.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •