milling machining centers - universal

Machinelist: milling machining centers - universal

milling machining centers - universal

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024055 · milling machining centers - universal

DMG MORI - CMX 70 U - - 2019 - Siemens 840D SL

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83 / 57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80 / 130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0 / 10,01 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14H7) Stk.︱T-slot spacing 63 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 83 / 57 Nm

table surface area 800 x 620 mm

tool taper SK40

number of tool places 30 Pos.

max. tool diameter 80 / 130 mm

max. tool length 300 mm

max. tool weight 8 kg

change-time chip to chip 7,0 / 10,01 sec

change-time tool to tool ca. 2,7 sec

Number of T-slots 9 (14H7) Stk.

T-slot spacing 63 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.

Technical features:
- IKZ 12 bar, tank capacity 300 l
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024056 · milling machining centers - universal

DMG MORI - CMX 70 U - - 2018 - Siemens 840D SL

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83/57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0/10,1 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14 H7) Stk.︱T-slot spacing 63 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. The spindle makes noise (see video). The machine has been checked by DMG and maintains accuracy. According to the DMG, no action is required. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 83/57 Nm

table surface area 800 x 620 mm

tool taper SK40

number of tool places 30 Pos.

max. tool diameter 80/130 mm

max. tool length 300 mm

max. tool weight 8 kg

change-time chip to chip 7,0/10,1 sec

change-time tool to tool ca. 2,7 sec

Number of T-slots 9 (14 H7) Stk.

T-slot spacing 63 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.
The spindle makes noise (see video). The machine has been checked by DMG and
maintains accuracy. According to the DMG, no action is required.

Technical features:
- IKZ 12 bar, tank capacity 300 l
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal DMG MORI ecomill 50

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024057 · milling machining centers - universal

DMG MORI - ecomill 50 - - 2016 - Siemens 840D SL

Technical details

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 82/57 Nm︱rotary table: ︱table surface area 630 x 500 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 16 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 6 kg︱change-time chip to chip 12/15 sec︱change-time tool to tool 9/12 sec︱T-slots (number x width x distance) 7 Stk. / B14 mm / 63 mm mm︱center hole d30 H6 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 360 l - ShopMill - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet - 3+2 axles Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm

y-travel 450 mm

z-travel 400 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 82/57 Nm

table surface area 630 x 500 mm

tool taper SK40

number of tool places 16 Pos.

max. tool diameter 80/130 mm

max. tool length 300 mm

max. tool weight 6 kg

change-time chip to chip 12/15 sec

change-time tool to tool 9/12 sec

T-slots (number x width x distan. 7 Stk. / B14 mm / 63 mm mm

center hole d30 H6 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.

Technical features:
- IKZ 12 bar, tank capacity 360 l
- ShopMill
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet
- 3+2 axles

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal SW-SCHWäBISCHE WERKZEUGMASCH. BA 400

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-202255 · milling machining centers - universal

SW-SCHWäBISCHE WERKZEUGMASCH. - BA 400 - - 2010 - Siemens 840D

Technical details

x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Siemens 840D ︱Number of boring spindles 2 St.︱spindle distance 400 mm︱spindle turning speed range 50 - 10000 U/min︱spindle drive 18 kW︱Number of working hours ca. 63015 h︱spindle hours ca. 32870 h︱︱no. of tables 1 ︱no. of clamping positions 4 ︱max. workpiece weight 450 kg︱tool magazin: ︱number of tool places 60 (120) Pos.︱tool taper HSK A63 ︱max. tool diameter 70 mm︱max. tool length 300 mm︱max. tool weight 10 kg︱

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. - There are 2 identical machines available ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***

x-travel 400 mm

y-travel 400 mm

z-travel 400 mm

Control Siemens 840D

Number of boring spindles 2 St.

spindle distance 400 mm

spindle turning speed range 50 - 10000 U/min

spindle drive 18 kW

Number of working hours ca. 63015 h

spindle hours ca. 32870 h

no. of tables 1

no. of clamping positions 4

max. workpiece weight 450 kg

number of tool places 60 (120) Pos.

tool taper HSK A63

max. tool diameter 70 mm

max. tool length 300 mm

max. tool weight 10 kg

Description :

In our opinion, the machine is in very good used condition
and can be inspected under power by appointment.

- There are 2 identical machines available

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

Datasheet

used Milling machines milling machining centers - universal MITSUI SEIKI HU50A-5X

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024060 · milling machining centers - universal

MITSUI SEIKI - HU50A-5X - - 2008 - Fanuc Series 31i-Model A5

Technical details

x-travel 720 mm︱y-travel 850 mm︱z-travel 850 mm︱Control Fanuc Series 31i-Model A5 ︱main spindle: ︱number of spindles 1 Stück︱turning speed range - main spindle 50 - 12.000 min/-1︱drive capacity - main spindle 30/25 kW︱︱no. of tables 2 ︱table-size 500 x 500 mm︱max. workpiece dimensions Ø750 x 700 mm︱max. workpiece weight 650 kg︱rotating range 360 °︱swivelling range +5 / -95 °︱tool magazin: ︱number of tool places 240 Pos.︱tool taper BT40 ︱max. tool diameter 125/216 mm︱max. tool length 400 mm︱

In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Technical features: - 5-axis machining center - Pallet change time: 40 sec - 240 tool slots ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 720 mm

y-travel 850 mm

z-travel 850 mm

Control Fanuc Series 31i-Model A5

number of spindles 1 Stück

turning speed range - main spind. 50 - 12.000 min/-1

drive capacity - main spindle 30/25 kW

no. of tables 2

table-size 500 x 500 mm

max. workpiece dimensions Ø750 x 700 mm

max. workpiece weight 650 kg

rotating range 360 °

swivelling range +5 / -95 °

number of tool places 240 Pos.

tool taper BT40

max. tool diameter 125/216 mm

max. tool length 400 mm

Description :

In our opinion, the machine is in very good used condition and can be viewed
under power by appointment.

Technical features:
- 5-axis machining center
- Pallet change time: 40 sec
- 240 tool slots

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal DECKEL-MAHO MH 1600 W

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023110 · milling machining centers - universal

DECKEL-MAHO - MH 1600 W - - 1994 - MAHO CNC 425

Technical details

x-travel 1600 mm︱y-travel 800 mm︱z-travel 800 mm︱control MAHO CNC 425 ︱main spindle: ︱turning speed range - main spindle 20 - 4000 min/-1︱drive capacity - main spindle 22 kW︱rotary table: ︱table surface area 1250 x 980 mm︱T-slots 18H7 ︱center bore 42mm H7 ︱max. table load 2000 kg︱tool changer: ︱tool taper ISO 50 ︱number of tool places 30 Pos.︱max. tool diameter 100 mm︱max. tool length 400 mm︱max. tool weight 20 kg︱feeds: ︱feed speeds 1-8000 mm/min︱

In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - Spindle re-stored in April 2018 - Automatic swivel head horizontal/vertical ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 1600 mm

y-travel 800 mm

z-travel 800 mm

control MAHO CNC 425

turning speed range - main spind. 20 - 4000 min/-1

drive capacity - main spindle 22 kW

table surface area 1250 x 980 mm

T-slots 18H7

center bore 42mm H7

max. table load 2000 kg

tool taper ISO 50

number of tool places 30 Pos.

max. tool diameter 100 mm

max. tool length 400 mm

max. tool weight 20 kg

feed speeds 1-8000 mm/min

Description :

In our opinion, the machine is in good condition and can be inspected under
power by appointment.

Technical features:
- Spindle re-stored in April 2018
- Automatic swivel head horizontal/vertical

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

Universal Milling Machine

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024062 · Universal Milling Machine

DMG - FP4 M Special Edition - - 2020 -

Technical details

x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱digital readout Heidenhain ND7013 ︱table surface area 800 x 480 mm︱turning speed range - main spindle 25 - 3.000 min/-1︱main drive 6 kW︱vertical head swivelling +90 / -90 Grad︱feed 6 - 500 mm/min︱rapid traverse 1,5 m/min︱Overall size 2.235 x 1.875 mm︱machine weight ab. 1.600 kg︱

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - Operating hours: 4,600 h - Spindle hours: 380 h ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm

y-travel 400 mm

z-travel 400 mm

digital readout Heidenhain ND7013

table surface area 800 x 480 mm

turning speed range - main spind. 25 - 3.000 min/-1

main drive 6 kW

vertical head swivelling +90 / -90 Grad

feed 6 - 500 mm/min

rapid traverse 1,5 m/min

Overall size 2.235 x 1.875 mm

machine weight ab. 1.600 kg

Description :

In our opinion, the machine is in very good condition and can be viewed under
power by appointment.

Technical features:
- Operating hours: 4,600 h
- Spindle hours: 380 h

***Accessories, tools and clamping devices shown are only included in the scope
of delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines Universal Milling Machine TVB HSC E-JET 550

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023146 · Universal Milling Machine

TVB - HSC E-JET 550 - - 2008 - Andronic 2060s

Technical details

x-travel 500 mm︱y-travel 500 mm︱z-travel 320 mm︱control Andronic 2060s ︱main spindle: ︱max. turning speeds 36.000 min/-1︱tool taper HSK 40 E ︱work table: ︱table surface area 550 x 550 mm︱max. table load 450 kg︱tool changer: ︱number of tool places 2,8 x 2 Pos.︱dimensions of the machine ca. m︱

In our opinion, the machine is in good used condition and can be inspected under power by appointment. technical features: - incl. tool length measuring system ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***

x-travel 500 mm

y-travel 500 mm

z-travel 320 mm

control Andronic 2060s

max. turning speeds 36.000 min/-1

tool taper HSK 40 E

table surface area 550 x 550 mm

max. table load 450 kg

number of tool places 2,8 x 2 Pos.

Description :

In our opinion, the machine is in good used condition and can be inspected
under power by appointment.

technical features:
- incl. tool length measuring system

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

Datasheet

used Milling machines Universal Milling Machine DECKEL-MAHO FP 3

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024063 · Universal Milling Machine

DECKEL-MAHO - FP 3 - - -

Technical details

x-travel 500 mm︱y-travel 300 mm︱z-travel 400 mm︱

In our opinion, the machine is in very good condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm

y-travel 300 mm

z-travel 400 mm

Description :

In our opinion, the machine is in very good condition and can be viewed under
power by appointment.

***Accessories, tools and clamping devices shown are only included in the scope
of delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

Purchase one of several universal milling machines

Used Universal Milling Machines from LagerMaschinen

When choosing a machine for your newly opened or expanding business it can sometimes be overwhelming to find that new machines are far out of your price range. However production growth sometimes depends on purchasing new equipment tools and machines. In this case a used machine may be the perfect solution for you. LagerMaschinen provides a platform for buyers and sellers to have their business and budgetary needs met in an efficient manner. By purchasing universal milling machines through LagerMaschinen you'll not only be saving yourself time and money you'll also be forming connections in your field. Additionally LagerMaschinen's delivery and installation services mean your universal milling machines can be up and running in no time.

Universal Milling Machines for every production branch.

Universal milling machines are used in a variety of different branches of production industry. Milling machines are useful for planing drilling and keyway and slot cutting. Whether your particular industry requires a horizontal mill or vertical mill LagerMaschinen will find something within your specifications. Search in your area for the most immediate solutions and communicate with sellers to find the universal milling machines that best fit your needs. Are you looking for a CNC mill? LagerMaschinen's delivery and installation services mean you won't need to install and route computer hardware to your new universal milling machine. Search for computers and software corresponding to the CNC universal milling machines rather than purchasing these items new and spending a fortune. Find your next machine at an affordable price with LagerMaschinen.

TOP Manufacturer:

DECKEL-MAHO - DMG - TOS - DMG MORI - DECKEL MAHO - HERMLE - MIKRON - GROB - MAHO - SCHARMANN -