Bed Type Milling Machine - Vertical

Machinelist: Bed Type Milling Machine - Vertical

Bed Type Milling Machine - Vertical

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-3140034 · Bed Type Milling Machine - Vertical

WAGNER - WBE1300R - - 2014 -

Technical details

x-travel 1300 mm︱y-travel 500 mm︱z-travel 570 mm︱spindle taper SK40 ︱spindle turning speed - stepless 60 - 6000 U/min︱rapid traverse x/y/z 7,5 m/min︱Number of tools 16 St.︱table surface area 1500 x 400 mm︱workpiece weight 700 kg︱total power requirement 12 kW︱weight of the machine ca. 4100 kg︱dimensions of the machine ca. 3800 x 3800 x 2800 mm︱

- SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual

x-travel 1300 mm

y-travel 500 mm

z-travel 570 mm

spindle taper SK40

spindle turning speed - stepless 60 - 6000 U/min

rapid traverse x/y/z 7,5 m/min

Number of tools 16 St.

table surface area 1500 x 400 mm

workpiece weight 700 kg

total power requirement 12 kW

weight of the machine ca. 4100 kg

dimensions of the machine ca. 3800 x 3800 x 2800 mm

Description :

- SIEMENS control SINUMERIK 828D
- automatic tool clamping
- Cooling device
- automatic central lubrication
- Chip tray
- Full enclosure
- Operation manual

Datasheet

used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-33116 · Bed Type Milling Machine - Vertical

KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

Technical details

x-travel 1600 mm︱y-travel 710 mm︱z-travel 710 mm︱Control Heidenhain TNC 124 ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 9 mm︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,5 x 2,80 x 2,75 m︱

Universal bed milling machine - Huron head manual - automatic Tool clamping - Handwheel - Central lubrication - Machine light - Table enclosure - Footswitch - Documentation

x-travel 1600 mm

y-travel 710 mm

z-travel 710 mm

Control Heidenhain TNC 124

turning speed range - main spind. 12 - 1600 min/-1

tool taper SK50

table surface area 2200 x 550 mm

max. table load 3000 kg

number of T-slots 5

T-slot - width 20 mm

T-slot - distance 9 mm

rapid travel x/y/z 5 / 5 / 2,5 mm/min

weight of the machine ca. 9 t

dimensions of the machine ca. 3,5 x 2,80 x 2,75 m

Description :

Universal bed milling machine
- Huron head manual
- automatic Tool clamping
- Handwheel
- Central lubrication
- Machine light
- Table enclosure
- Footswitch
- Documentation

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2023067 · Bed Type Milling Machine - Vertical

KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

Technical details

x-travel 1600 mm︱y-travel 720 mm︱z-travel 760 mm︱Control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱work table: ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 80 mm︱feeds: ︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,76 x 2,85 x 3,05 m︱

In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - The machine has a universal milling head ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 1600 mm

y-travel 720 mm

z-travel 760 mm

Control Heidenhain TNC 124

turning speed range - main spind. 12 - 1600 min/-1

tool taper SK50

table surface area 2200 x 550 mm

max. table load 3000 kg

number of T-slots 5

T-slot - width 20 mm

T-slot - distance 80 mm

rapid travel x/y/z 5 / 5 / 2,5 mm/min

weight of the machine ca. 8 t

dimensions of the machine ca. 4,76 x 2,85 x 3,05 m

Description :

In our opinion, the machine is in good condition and
can be inspected under power by appointment.

Technical features:
- The machine has a universal milling head

***Accessories, tools and clamping devices shown are only part of the scope of
delivery if this is noted in the additional information.***

***Changes and errors in the technical data and information as well as
Subject to prior sale!***

Datasheet

used Milling machines Bed Type Milling Machine - Vertical Kao Ming 332M Multi Face

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F435 · Bed Type Milling Machine - Vertical

Kao Ming - 332M Multi Face - - 2009 -

Technical details

CNC brand Fanuc ︱CNC model 18i-MB ︱Table length 3000 mm︱Table width 2600 mm︱Maximum table load 12 T︱X 3230 mm︱Y 3850 mm︱Z 1100 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 10 m/min︱Speed 8000 RPM︱Tool changer 30 ︱Distance between columns 3200 mm︱Distance between spindle and table 1425 mm︱Along feed 5 mm/min︱Motor 22/26 kW︱Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm︱Machine weight 44000 kg︱

With chipconveyor and chip bucket Max. Table load: 12.000 kg Motor spil: 22/26 kW Tools vertical: - Length max. 350 mm - Diam. max. 130 mm ø - Max. diam with 3 places next to it occupied 200 mm ø - Max. weight 20 kg

CNC brand Fanuc

CNC model 18i-MB

Table length 3000 mm

Table width 2600 mm

Maximum table load 12 T

X 3230 mm

Y 3850 mm

Z 1100 mm

Spindle taper ISO 50

Number of pallets 1

Rapid traverse 10 m/min

Speed 8000 RPM

Tool changer 30

Distance between columns 3200 mm

Distance between spindle and tab. 1425 mm

Along feed 5 mm/min

Motor 22/26 kW

Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm

Machine weight 44000 kg

Description :

With chipconveyor and chip bucket
Max. Table load: 12.000 kg
Motor spil: 22/26 kW
Tools vertical:
- Length max. 350 mm
- Diam. max. 130 mm ø
- Max. diam with 3 places next to it occupied 200 mm ø
- Max. weight 20 kg

Datasheet

used Milling machines Bed Type Milling Machine - Vertical Soraluce Soramill SL 5.000

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F336 · Bed Type Milling Machine - Vertical

Soraluce - Soramill SL 5.000 - - 1995 -

Technical details

CNC brand Heidenhain ︱CNC model TNC 415 B ︱Table length 5000 mm︱Table width 800 mm︱Maximum table load 12,5 T︱X 3500 mm︱Y 900 mm︱Z 1000 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 12 m/min︱Speed 2000 RPM︱Indexing per 2,5 °︱Motor 22 kW︱Power 22 kVA︱Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm︱Machine weight 16500 kg︱

Portal bed milling machine Color display Coolant treatment CNC controlled milling head Chip conveyor Milling head is 100% overhauled

CNC brand Heidenhain

CNC model TNC 415 B

Table length 5000 mm

Table width 800 mm

Maximum table load 12,5 T

X 3500 mm

Y 900 mm

Z 1000 mm

Spindle taper ISO 50

Number of pallets 1

Rapid traverse 12 m/min

Speed 2000 RPM

Indexing per 2,5 °

Motor 22 kW

Power 22 kVA

Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm

Machine weight 16500 kg

Description :

Portal bed milling machine
Color display
Coolant treatment
CNC controlled milling head
Chip conveyor
Milling head is 100% overhauled

Datasheet

used Milling machines Bed Type Milling Machine - Vertical RECKERMANN Beta 10 Kombi

desba TRADING
Im Hofgarten 6
61130 Nidderau
Deutschland

+49 (0)6187 20 30 749
info@desba-trading.de
www.desba-trading.de

#2072-2134 · Bed Type Milling Machine - Vertical

RECKERMANN - Beta 10 Kombi - - 1987 - Heidenhain TNC 155

Technical details

x-travel 1500 mm︱y-travel 600 mm︱z-travel 450 mm︱Control Heidenhain TNC 155 ︱total power requirement 28,4 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱

x-travel 1500 mm

y-travel 600 mm

z-travel 450 mm

Control Heidenhain TNC 155

total power requirement 28,4 kW

weight of the machine ca. 5,5 t

Datasheet

used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000L30ke

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03431 · Bed Type Milling Machine - Vertical

DROOP & REIN - LFAS2000L30ke - - 1986 - Fidia

Technical details

x-travel 3300 mm︱y-travel 2200 mm︱z-travel 1300 mm︱w-axis 350 mm︱workpiece height 1700 mm︱milling spindle diameter 140 mm︱diameter of quill 230 mm︱milling head speed 40-2000 U/min︱transmission ratio 4 ︱table surface area 4260x2000 mm︱T-slot - distance 175 mm︱T-slot - width 28 mm︱number of T-slots 11 ︱workpiece weight 300000 kg︱milling spindle motor 30 kW︱Feed 5-3000 mm/min︱control Fidia ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱

x-travel 3300 mm

y-travel 2200 mm

z-travel 1300 mm

w-axis 350 mm

workpiece height 1700 mm

milling spindle diameter 140 mm

diameter of quill 230 mm

milling head speed 40-2000 U/min

transmission ratio 4

table surface area 4260x2000 mm

T-slot - distance 175 mm

T-slot - width 28 mm

number of T-slots 11

workpiece weight 300000 kg

milling spindle motor 30 kW

Feed 5-3000 mm/min

control Fidia

weight of the machine ca. 80 t

Datasheet

used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000Kc

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03247 · Bed Type Milling Machine - Vertical

DROOP & REIN - LFAS2000Kc - - 1983 - Heindenhain

Technical details

x-travel 4000 mm︱y-travel 2000 mm︱z-travel 1300 mm︱Control Heindenhain ︱type TNC530i ︱︱table surface area 5200x2000 mm︱Table load 30000 kg︱pinole diameter 230 mm︱number of T-slots 11 ︱T-slot - width 28 mm︱T-slot - distance 175 mm︱spindle taper ISO 50 ︱turning speeds 40-2000 U/min︱spindle motor 30 kW︱transmission ratio 4 ︱total power requirement kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 10x5,5x5,8 m︱

Maschine wurde überholt machine is retofit

x-travel 4000 mm

y-travel 2000 mm

z-travel 1300 mm

Control Heindenhain

type TNC530i

table surface area 5200x2000 mm

Table load 30000 kg

pinole diameter 230 mm

number of T-slots 11

T-slot - width 28 mm

T-slot - distance 175 mm

spindle taper ISO 50

turning speeds 40-2000 U/min

spindle motor 30 kW

transmission ratio 4

weight of the machine ca. 70 t

dimensions of the machine ca. 10x5,5x5,8 m

Description :

Maschine wurde überholt
machine is retofit

Datasheet

used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN FS 130 gke

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-03244 · Bed Type Milling Machine - Vertical

DROOP & REIN - FS 130 gke - - 1971 - Heidenhain

Technical details

x-travel 2000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 430 ︱︱spindle turning speed range 15-1450 U/min︱Table area 2300x1200 mm︱Spindle 200 mm︱spindle stroke 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

Nr 3762 Maschine wurde überholt machine is retofit

x-travel 2000 mm

y-travel 1000 mm

z-travel 1000 mm

Control Heidenhain

type TNC 430

spindle turning speed range 15-1450 U/min

Table area 2300x1200 mm

Spindle 200 mm

spindle stroke 200 mm

Description :

Nr 3762
Maschine wurde überholt
machine is retofit

Datasheet

milling machining centers - universal

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-91190 · milling machining centers - universal

KRAFT - VU-400 - - Fabrikneu - Fanuc/Heidenhain

Technical details

x-travel 600 mm︱y-travel 580 mm︱z-travel 530 mm︱distance spindle center to column 630 mm︱distance spindle center to table 100-600 mm︱milling feed range 1-10.000 mm/min︱max. table load 200/100 kg︱max. tool weight 8 kg︱positioning accuracy +/- 0,01 mm︱ 8000/15000 1/min︱spindle drive 7,5/11,5 /5,5 kW︱repeating accuracy +/- 0,008 mm︱weight of the machine ca. 7,4 / 7,65 t︱

Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN Warranty: 12 months More information can be found in the Appendix.

x-travel 600 mm

y-travel 580 mm

z-travel 530 mm

distance spindle center to colum. 630 mm

distance spindle center to table 100-600 mm

milling feed range 1-10.000 mm/min

max. table load 200/100 kg

max. tool weight 8 kg

positioning accuracy +/- 0,01 mm

8000/15000 1/min

spindle drive 7,5/11,5 /5,5 kW

repeating accuracy +/- 0,008 mm

weight of the machine ca. 7,4 / 7,65 t

Description :

Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN

Warranty: 12 months

More information can be found in the Appendix.

Datasheet

used Milling machines milling machining centers - universal KRAFT YZC-1600

Kraft Werkzeugmaschinen GmbH
Wilhelmstraße 20
64589 Stockstadt
Deutschland

+49 (0) 6158/9999975
nr@kraft-werkzeugmaschinen.de
www.kraft-werkzeugmaschinen.de

#4019-99025 · milling machining centers - universal

KRAFT - YZC-1600 - - Fabrikneu - Heidenhain/Siemens/Fanuc

Technical details

x-travel - mm︱y-travel 1000 (Ständer quer) mm︱z-travel 952 mm︱table-size 1650 (weitere auf Anfrage mm︱table - indexing 0,001 °︱table load 8000 kg︱spindle speeds 3500 1/min︱spindle drive Motorspindel von Cytec CS Nm︱spindle taper 50 BT/SK︱T-slots Radialer Typ 12 Schlitze mm︱milling feed range 5.000 mm/min︱rapid traverse feeds Y/Z/C: 10 / 10 / 4.16 m/min︱diameter of tools max. Ø120 mm︱workpiece length 300 mm︱weight of tools max. 15 kg︱weight of the machine ca. 16 t︱dimensions of the machine ca. s. Katalog m︱CNC controller Siemens 828D ︱cnc rotary table ︱B-axis Fräskopf, 0-180° ︱

x-travel - mm

y-travel 1000 (Ständer quer) mm

z-travel 952 mm

table-size 1650 (weitere auf Anfrage mm

table - indexing 0,001 °

table load 8000 kg

spindle speeds 3500 1/min

spindle drive Motorspindel von Cytec CS Nm

spindle taper 50 BT/SK

T-slots Radialer Typ 12 Schlitze mm

milling feed range 5.000 mm/min

rapid traverse feeds Y/Z/C: 10 / 10 / 4.16 m/min

diameter of tools max. Ø120 mm

workpiece length 300 mm

weight of tools max. 15 kg

weight of the machine ca. 16 t

dimensions of the machine ca. s. Katalog m

CNC controller Siemens 828D

B-axis Fräskopf, 0-180°

Datasheet

used Milling machines milling machining centers - universal DMG MORI CMX 70 U

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024055 · milling machining centers - universal

DMG MORI - CMX 70 U - - 2019 - Siemens 840D SL

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83 / 57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80 / 130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0 / 10,01 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14H7) Stk.︱T-slot spacing 63 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 83 / 57 Nm

table surface area 800 x 620 mm

tool taper SK40

number of tool places 30 Pos.

max. tool diameter 80 / 130 mm

max. tool length 300 mm

max. tool weight 8 kg

change-time chip to chip 7,0 / 10,01 sec

change-time tool to tool ca. 2,7 sec

Number of T-slots 9 (14H7) Stk.

T-slot spacing 63 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.

Technical features:
- IKZ 12 bar, tank capacity 300 l
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal Romi D800

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F638 · milling machining centers - universal

Romi - D800 - - 2018 -

Technical details

CNC brand Siemens ︱CNC model Sinumerik 828D ︱Table length 914 mm︱Table width 500 mm︱X 800 mm︱Y 530 mm︱Z 580 mm︱Spindle taper BT40 ︱Tool changer 30 ︱Minimum speed 8 RPM︱Maximum speed 8.000 RPM︱Maximum palletload 1300 kg︱Power 17 kW︱Machine dimensions 3.100 x 2.300 x 2.550 mm︱Machine weight 5.500 kg︱

Brand Romi Machine no F638 Type D800 CNC Brand Siemens CNC Type Sinumerik 828D Year of make 2018 Table length 914 mm Table width 500 mm X 800 mm Y 530 mm Z 580 mm Spindle taper BT40 Speed minimum 8 RPM Speed maximum 8.000 RPM Engine power 17 kW Machine size 3.100 x 2.300 x 2.550 mm Machine weight 5.500 kg Tool magazine positions: 30

CNC brand Siemens

CNC model Sinumerik 828D

Table length 914 mm

Table width 500 mm

X 800 mm

Y 530 mm

Z 580 mm

Spindle taper BT40

Tool changer 30

Minimum speed 8 RPM

Maximum speed 8.000 RPM

Maximum palletload 1300 kg

Power 17 kW

Machine dimensions 3.100 x 2.300 x 2.550 mm

Machine weight 5.500 kg

Description :

Brand Romi
Machine no F638
Type D800
CNC Brand Siemens
CNC Type Sinumerik 828D
Year of make 2018
Table length 914 mm
Table width 500 mm
X 800 mm
Y 530 mm
Z 580 mm
Spindle taper BT40
Speed minimum 8 RPM
Speed maximum 8.000 RPM
Engine power 17 kW
Machine size 3.100 x 2.300 x 2.550 mm
Machine weight 5.500 kg
Tool magazine positions: 30

Datasheet

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024056 · milling machining centers - universal

DMG MORI - CMX 70 U - - 2018 - Siemens 840D SL

Technical details

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83/57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0/10,1 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14 H7) Stk.︱T-slot spacing 63 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. The spindle makes noise (see video). The machine has been checked by DMG and maintains accuracy. According to the DMG, no action is required. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 750 mm

y-travel 600 mm

z-travel 520 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 83/57 Nm

table surface area 800 x 620 mm

tool taper SK40

number of tool places 30 Pos.

max. tool diameter 80/130 mm

max. tool length 300 mm

max. tool weight 8 kg

change-time chip to chip 7,0/10,1 sec

change-time tool to tool ca. 2,7 sec

Number of T-slots 9 (14 H7) Stk.

T-slot spacing 63 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.
The spindle makes noise (see video). The machine has been checked by DMG and
maintains accuracy. According to the DMG, no action is required.

Technical features:
- IKZ 12 bar, tank capacity 300 l
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal DMG MORI ecomill 50

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-2024057 · milling machining centers - universal

DMG MORI - ecomill 50 - - 2016 - Siemens 840D SL

Technical details

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 82/57 Nm︱rotary table: ︱table surface area 630 x 500 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 16 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 6 kg︱change-time chip to chip 12/15 sec︱change-time tool to tool 9/12 sec︱T-slots (number x width x distance) 7 Stk. / B14 mm / 63 mm mm︱center hole d30 H6 mm︱

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 360 l - ShopMill - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet - 3+2 axles Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm

y-travel 450 mm

z-travel 400 mm

Control Siemens 840D SL

max. turning speeds 12.000 min/-1

drive capacity - main spindle 13/9 kW

max. torque 82/57 Nm

table surface area 630 x 500 mm

tool taper SK40

number of tool places 16 Pos.

max. tool diameter 80/130 mm

max. tool length 300 mm

max. tool weight 6 kg

change-time chip to chip 12/15 sec

change-time tool to tool 9/12 sec

T-slots (number x width x distan. 7 Stk. / B14 mm / 63 mm mm

center hole d30 H6 mm

Description :

In our opinion, the machine is in very good used condition
Condition and can be viewed under power by appointment.

The machine will be available from around August/September. Available in 2024
and still in production.

Technical features:
- IKZ 12 bar, tank capacity 360 l
- ShopMill
- Direct position measuring system x, y, z axis
- Measuring probe kit PP40 measuring probe, TS27R tool measurement
- 3D quickSet
- 3+2 axles

Accesories:
- chip conveyor
- Handwheel

***Accessories, tools and clamping devices shown are only included in the scope
of delivery
if this is noted in the additional information.***

***Changes and errors in the technical data and information as well
Subject to prior sale!***

Datasheet

used Milling machines milling machining centers - universal AWEA FV-960

Bästlein
Augsburger Str. 56
89312 Günzburg
Deutschland

+49 (0) 8221 93037-0
+49 (0) 8221 93037-29
info@baestlein.com
www.baestlein.com

#1123-1030270 · milling machining centers - universal

AWEA - FV-960 - - 2015 - HEIDENHAIN

Technical details

x-travel 960 mm︱y-travel 600 mm︱z-travel 480 mm︱ 120 / - 42 °︱ 360 °︱table load 200 kg︱Table dimensions 560x365 mm︱Spindle Speed 12000 U/min.︱conus taper BBT 40 mm︱distance spindle /table 100-580 mm︱tool length - max. 300 mm︱weight of tools max. 7 kg︱control HEIDENHAIN ︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. 3100x2200x3070 mm︱

5-axis universal machining center Model CNC Heidenhain ITNC 530 Coolant through spindle CTS. Renishaw tool probe. Oil cooler. Equipment/accessories: - IKZ - electr. handwheel - chip conveyor - direct measuring system Operating hours: approx. 9,000 switch-on hours approx. 3,500 spindle hours

x-travel 960 mm

y-travel 600 mm

z-travel 480 mm

120 / - 42 °

360 °

table load 200 kg

Table dimensions 560x365 mm

Spindle Speed 12000 U/min.

conus taper BBT 40 mm

distance spindle /table 100-580 mm

tool length - max. 300 mm

weight of tools max. 7 kg

control HEIDENHAIN

weight of the machine ca. 7000 kg

dimensions of the machine ca. 3100x2200x3070 mm

Description :

5-axis universal machining center

Model CNC Heidenhain ITNC 530
Coolant through spindle CTS.
Renishaw tool probe.
Oil cooler.

Equipment/accessories:
- IKZ
- electr. handwheel
- chip conveyor
- direct measuring system

Operating hours:
approx. 9,000 switch-on hours
approx. 3,500 spindle hours

Datasheet

used Milling machines milling machining centers - universal AKIRA SEIKI RMV 250 RT

FIMOTEC
20 RUE AMPERE
67500 HAGUENAU
Frankreich

+33 (0)388720247
+33 (0)388936066
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR

#1105-03925 · milling machining centers - universal

AKIRA SEIKI - RMV 250 RT - - 2014 -

Technical details

x-travel 500 mm︱y-travel 250 mm︱z-travel 400 mm︱table-size RUNDTISCH 250 mm︱spindle taper ISO HSK 63 ︱spindle turning speed range 45 - 12000 U/min︱spindle drive motor 11 kW︱tool change unit 24 ︱CNC-control FANUC OIMD ︱voltage 380 V︱max. table load 200 kg︱throat 380 mm︱coolant ︱total power requirement 17 kVA︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3.5x 2.5x 2,60 m︱

AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment NTROUGHT THE SPINDEL 20 BARS CHIP CONVOYER 5 AXIS MACHINE IN GOOD CONDITION

x-travel 500 mm

y-travel 250 mm

z-travel 400 mm

table-size RUNDTISCH 250 mm

spindle taper ISO HSK 63

spindle turning speed range 45 - 12000 U/min

spindle drive motor 11 kW

tool change unit 24

CNC-control FANUC OIMD

voltage 380 V

max. table load 200 kg

throat 380 mm

total power requirement 17 kVA

weight of the machine ca. 5 t

dimensions of the machine ca. 3.5x 2.5x 2,60 m

Description :

AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014
- coolant equipment NTROUGHT THE SPINDEL 20 BARS
CHIP CONVOYER
5 AXIS MACHINE
IN GOOD CONDITION

Datasheet

used Milling machines milling machining centers - universal EMCO MaxxMill 500

MS Maschinenhandel GmbH
Unterdorf 34
6532 Ladis
Österreich

+43 547221907
+43 54722190722
info@ms-maschinen.at
www.ms-maschinen.at

#2034-131 · milling machining centers - universal

EMCO - MaxxMill 500 - - 2014 - SIEMENS 840D

Technical details

x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱

This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h

x-travel 750 mm

y-travel 550 mm

z-travel 500 mm

Control SIEMENS 840D

B-axis (table) +-100 °

c-axis 360 °

spindle turning speed range 0 - 15000 U/min

tool taper ISO SK-40

workpiece weight 250 kg

tool change unit 30 -fach

rapid traverse 30 m/min

table dimension - longitudinal 600 mm

table dimension - cross 600 mm

total power requirement 26,4 kW

weight of the machine ca. 10 t

dimensions of the machine ca. 3,5 x 2,45 x 2,8 m

Description :

This EMCO MaxxMill 500 machining centre is in good condition.
can be inspected at any time by arrangement under chip at the seller.

Emco Maxxmill500 built in 2014:
Machine hours 20,939 h
Spindle hours 6,731 h
Operating hours (machining) 5,042 h

Datasheet

used Milling machines milling machining centers - universal C-Tek KM-150D

Jansen Machinehandel BV
Bredaseweg 210
4873 LA Etten-leur
Nederland

+31 (0) 76 5015750
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl

#2049-F654 · milling machining centers - universal

C-Tek - KM-150D - - 2014 -

Technical details

CNC brand C-Tek ︱CNC model CNT Series ︱Table length 1.600 mm︱Table width 450 mm︱X 1.500 mm︱Y 650 mm︱Z 620 mm︱Spindle taper ISO40 ︱Tool changer 24 ︱Maximum speed 6.000 RPM︱Machine dimensions 3.000 x 2.800 x 2.600 mm︱Machine weight 5.000 kg︱

Brand C-Tek Machine no F654 Type KM-150D CNC Brand C-Tek CNC Type CNT Series Year of make 2014 Table length 1.600 mm Table width 450 mm X 1.500 mm Y 650 mm Z 620 mm Spindle taper ISO40 Speed maximum 6.000 RPM Maximum table load 1.000 kg Machine size 3.000 x 2.800 x 2.600 mm Machine weight 5.000 kg Tool magazine positions: 24

CNC brand C-Tek

CNC model CNT Series

Table length 1.600 mm

Table width 450 mm

X 1.500 mm

Y 650 mm

Z 620 mm

Spindle taper ISO40

Tool changer 24

Maximum speed 6.000 RPM

Machine dimensions 3.000 x 2.800 x 2.600 mm

Machine weight 5.000 kg

Description :

Brand C-Tek
Machine no F654
Type KM-150D
CNC Brand C-Tek
CNC Type CNT Series
Year of make 2014
Table length 1.600 mm
Table width 450 mm
X 1.500 mm
Y 650 mm
Z 620 mm
Spindle taper ISO40
Speed maximum 6.000 RPM
Maximum table load 1.000 kg
Machine size 3.000 x 2.800 x 2.600 mm
Machine weight 5.000 kg

Tool magazine positions: 24

Datasheet

MS Maschinenhandel GmbH
Unterdorf 34
6532 Ladis
Österreich

+43 547221907
+43 54722190722
info@ms-maschinen.at
www.ms-maschinen.at

#2034-132 · milling machining centers - universal

EMCO - MaxxMill 500 - - 2012 - SIEMENS 840D

Technical details

x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱

This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h

x-travel 750 mm

y-travel 550 mm

z-travel 500 mm

Control SIEMENS 840D

tool taper ISO SK-40

tool change unit 30 -fach

rapid traverse 30 m/min

table - swivable +/- 100 °

table rotating 360 °

table dimension - longitudinal 600 mm

table dimension - cross 600 mm

workpiece weight 250 kg

spindle turning speed range 0-15000 U/min

total power requirement 26,4 kW

weight of the machine ca. 10 t

dimensions of the machine ca. 3,5 x 2,45 x 2,8 m

Description :

This EMCO MaxxMill 500 machining centre is in good condition.
can be inspected at any time by arrangement under chip at the seller.

Emco Maxxmill500 Bj. 2012:
Maschinenstunden 19.125 h
Spindelstunden 4.954 h
Betriebsstunden (zerspanen) 3.483 h

Datasheet

used Milling machines milling machining centers - universal KONDIA Five 400

Aleman Machines e.K.
Am Mühlweg 1
73466 Lauchheim
Deutschland

+49 (0)7363-6098 20
+49 (0)7363-6098 19
info@aleman-machines.com
www.aleman-machines.com

#1120-999 · milling machining centers - universal

KONDIA - Five 400 - - 2011 - HEIDENHAIN iTNC 530

Technical details

x-travel 850 mm︱y-travel 500 mm︱z-travel 610 mm︱Control HEIDENHAIN iTNC 530 ︱handwheel inkl ︱Chip coveyor inkl ︱Internal cooling system 40 bar︱Turn table D 400 mm︱number of spindle speeds 12.000 U/min/rpm︱spindle drive 17/10 kW︱Tools changer 40 fach/tools︱spindle taper ISO SK40 ︱total power requirement 28,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 3 x 2.70 x 3,2 m︱

5-axis simultaneous universal machining center NC rotary swivel table D 400mm 3D infrared probe blown air through spindle flush gun direct measurement system

x-travel 850 mm

y-travel 500 mm

z-travel 610 mm

Control HEIDENHAIN iTNC 530

handwheel inkl

Chip coveyor inkl

Internal cooling system 40 bar

Turn table D 400 mm

number of spindle speeds 12.000 U/min/rpm

spindle drive 17/10 kW

Tools changer 40 fach/tools

spindle taper ISO SK40

total power requirement 28,5 kW

weight of the machine ca. 7,7 t

dimensions of the machine ca. 3 x 2.70 x 3,2 m

Description :

5-axis simultaneous universal machining center
NC rotary swivel table D 400mm
3D infrared probe
blown air through spindle
flush gun
direct measurement system

Datasheet

used Milling machines milling machining centers - universal GROB G 350 AB11K

Kemmerich Werkzeugmaschinen
Im Rottfeld 1a
40789 Monheim am Rhein
Deutschland

+49 2173 207474
+49 2173 207473
info@kemmerich.biz
www.kemmerich.biz

#1020-19469 · milling machining centers - universal

GROB - G 350 AB11K - - 2011 - Heidenhain iTMC 530

Technical details

x-travel 600 mm︱y-travel 855 mm︱z-travel 750 mm︱clearance diameter 720 mm︱table surface area 400 x 400 mm︱table rotation speed 50 U/min︱pivoting angle -185 / +45 Grad︱workpiece weight 340 kg︱tool taper HSK-A 63 ︱spindle turning speed - stepless 12000 U/min︱spindle motor 40 kW︱tool diameter 70 mm︱tool length - max. 365 mm︱weight of tools max. 8 kg︱rapid travel range 70/45/90 m/min︱control Heidenhain iTMC 530 ︱total power requirement 54 kVA︱weight of the machine ca. 15 t︱dimensions of the machine ca. 6,1 x 2,47 x 3,17 m︱

The 5-axis universal machining center G350 offers nearly unlimited possibilities in the milling of workpieces of various materials. materials. equipped with: - CNC control Heidenhain iTNC 530 - 2-fold Pallet Changer - NC swivel rotary table (A-/B-axis) - tool changer 40 places (HSK A63) - IKZ / coolant system 3-22,5bar - chip conveyor

x-travel 600 mm

y-travel 855 mm

z-travel 750 mm

clearance diameter 720 mm

table surface area 400 x 400 mm

table rotation speed 50 U/min

pivoting angle -185 / +45 Grad

workpiece weight 340 kg

tool taper HSK-A 63

spindle turning speed - stepless 12000 U/min

spindle motor 40 kW

tool diameter 70 mm

tool length - max. 365 mm

weight of tools max. 8 kg

rapid travel range 70/45/90 m/min

control Heidenhain iTMC 530

total power requirement 54 kVA

weight of the machine ca. 15 t

dimensions of the machine ca. 6,1 x 2,47 x 3,17 m

Description :

The 5-axis universal machining center G350 offers nearly unlimited
possibilities in the milling of workpieces of various materials.
materials.
equipped with:
- CNC control Heidenhain iTNC 530
- 2-fold Pallet Changer
- NC swivel rotary table (A-/B-axis)
- tool changer 40 places (HSK A63)
- IKZ / coolant system 3-22,5bar
- chip conveyor

Datasheet

used Milling machines milling machining centers - universal MATSUURA MAM72-25V PC2

Marcels Maschinen AG
Anthoptstrasse 11
8222 Beringen (Schaffhausen)
Schweiz

(0041) 44 872 3400
(0041) 44 872 3403
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch

#1065-4726 · milling machining centers - universal

MATSUURA - MAM72-25V PC2 - - 2011 -

Technical details

x-travel 550 mm︱y-travel 410 mm︱z-travel 450 mm︱b-axis +110/-110 °︱spindle turning speed range -15000 U/min︱spindle taper BT Big Plus 40 ︱tool change unit 40x ︱size of pallet 2x D-250 mm︱weight of the machine ca. 8.6 t︱

5 axes machining center FANUC G-Tech 30i Coolant through spindle 3D measuring probe Tool measuring device Misc pallets Misc tool holders More details on www.marcels-maschinen.ch

x-travel 550 mm

y-travel 410 mm

z-travel 450 mm

b-axis +110/-110 °

spindle turning speed range -15000 U/min

spindle taper BT Big Plus 40

tool change unit 40x

size of pallet 2x D-250 mm

weight of the machine ca. 8.6 t

Description :

5 axes machining center

FANUC G-Tech 30i

Coolant through spindle
3D measuring probe
Tool measuring device
Misc pallets
Misc tool holders

More details on www.marcels-maschinen.ch

Datasheet

used Milling machines milling machining centers - universal SW-SCHWäBISCHE WERKZEUGMASCH. BA 400

Matthias Ehlers Werkzeugmaschinen
Nikolaus-Otto-Straße 19 + 21
22946 Trittau
Deutschland

+49 (0)4154 - 986 99 12
+49 (0)4154 - 986 99 14
anfrage@ehlers-wzm.de
www.ehlers-wzm.de

#2033-202255 · milling machining centers - universal

SW-SCHWäBISCHE WERKZEUGMASCH. - BA 400 - - 2010 - Siemens 840D

Technical details

x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Siemens 840D ︱Number of boring spindles 2 St.︱spindle distance 400 mm︱spindle turning speed range 50 - 10000 U/min︱spindle drive 18 kW︱Number of working hours ca. 63015 h︱spindle hours ca. 32870 h︱︱no. of tables 1 ︱no. of clamping positions 4 ︱max. workpiece weight 450 kg︱tool magazin: ︱number of tool places 60 (120) Pos.︱tool taper HSK A63 ︱max. tool diameter 70 mm︱max. tool length 300 mm︱max. tool weight 10 kg︱

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. - There are 2 identical machines available ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***

x-travel 400 mm

y-travel 400 mm

z-travel 400 mm

Control Siemens 840D

Number of boring spindles 2 St.

spindle distance 400 mm

spindle turning speed range 50 - 10000 U/min

spindle drive 18 kW

Number of working hours ca. 63015 h

spindle hours ca. 32870 h

no. of tables 1

no. of clamping positions 4

max. workpiece weight 450 kg

number of tool places 60 (120) Pos.

tool taper HSK A63

max. tool diameter 70 mm

max. tool length 300 mm

max. tool weight 10 kg

Description :

In our opinion, the machine is in very good used condition
and can be inspected under power by appointment.

- There are 2 identical machines available

***Accessories, tools and clamping devices shown are only part of the scope of
delivery
if this is noted in the additional information.***

Datasheet

TOP Manufacturer:

DROOP & REIN - KIHEUNG - KAO MING - WAGNER - RECKERMANN - SORALUCE -