,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Milling Machine - Vertical

          Machinelist: Milling Machine - Vertical


          milling machining centers - vertical

          used Milling machines milling machining centers - vertical QUASER MV 154 PL/12


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06029 · milling machining centers - vertical

          QUASER - MV 154 PL/12 - - 2008 - HEIDENHAIN, iTNC 530

          Technical details
          x-travel 1020 mm︱y-travel 500 mm︱z-travel 500 mm︱table surface area 1200 x 500 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 40 - 12.000 U/min︱spindle drive 18,5 kW︱feeds 0 - 20.000 mm/min︱rapid traverse 40 m/min︱ATC 30 Pos︱control HEIDENHAIN, iTNC 530 ︱total power requirement 30 kW︱weight of the machine ca. 6,85 t︱dimensions of machine L x W x H 2,47 x 2,54 x 2,83 m︱
          - with coolant through spindle Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant
            x-travel 1020 mm
            y-travel 500 mm
            z-travel 500 mm
            table surface area 1200 x 500 mm
            spindle taper SK 40
            spindle turning speed - stepless 40 - 12.000 U/min
            spindle drive 18,5 kW
            feeds 0 - 20.000 mm/min
            rapid traverse 40 m/min
            ATC 30 Pos
            control HEIDENHAIN, iTNC 530
            total power requirement 30 kW
            weight of the machine ca. 6,85 t
            dimensions of machine L x W x H 2,47 x 2,54 x 2,83 m
            Description :
            - with coolant through spindle

            Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws
            160mm;
            various tool holders, chip conveyor, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FIRST MCV 1500


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06043 · milling machining centers - vertical

          FIRST - MCV 1500 - - 2008 - HEIDENHAIN, TNC 530

          Technical details
          x-travel 1500 mm︱y-travel 800 mm︱z-travel 700 mm︱table surface area 1760 x 700 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 8000 U/min︱spindle drive 15 kW︱feeds 1 - 8000 mm/min︱rapid traverse X/Y/Z axis 15 / 15 / 12 m/min︱table load max. 2500 kg︱spindle throat 760 mm︱ATC 40 Pos︱control HEIDENHAIN, TNC 530 ︱total power requirement kW︱weight of the machine ca. 12,5 t︱dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m︱
          - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -
            x-travel 1500 mm
            y-travel 800 mm
            z-travel 700 mm
            table surface area 1760 x 700 mm
            spindle taper SK 40
            spindle turning speed - stepless 8000 U/min
            spindle drive 15 kW
            feeds 1 - 8000 mm/min
            rapid traverse X/Y/Z axis 15 / 15 / 12 m/min
            table load max. 2500 kg
            spindle throat 760 mm
            ATC 40 Pos
            control HEIDENHAIN, TNC 530
            weight of the machine ca. 12,5 t
            dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m
            Description :
            - with coolant through spindle

            Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm;
            2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm;
            various tool holders, chip conveyor, coolant

            - geometrical overhauled in 2022 -
            - new ball bearing spindle installed on Y-axis in NOV. 2022 -

            - the magnetic plates shown on the photo are not included -

          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical SPINNER VC-650


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06035 · milling machining centers - vertical

          SPINNER - VC-650 - - 2007 - mit FANUC MANUAL GUIDE

          Technical details
          x-travel 650 mm︱y-travel 500 mm︱z-travel 530 mm︱table surface area 800 x 500 mm︱control FANUC 21 iMB ︱control mit FANUC MANUAL GUIDE ︱spindle turning speed range 60 - 8000 U/min︱spindle taper SK 40 ︱spindle taper DIN 69871 A ︱table load max. 500 kg︱rapid traverse X/Y/Z axis 30 m/min︱ATC 30 Pos︱workpiece diameter at full load 80 mm︱tool diameter if 2 vacant positions 120 mm︱tool length - max. 250 mm︱weight of tools max. 7 kg︱total power requirement 30 kVA︱weight of the machine ca. 4,5 t︱dimensions of machine L x W x H 2,4 x 2,2 x 2,46 m︱
          Accessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C; 2 machine vices, coolant
            x-travel 650 mm
            y-travel 500 mm
            z-travel 530 mm
            table surface area 800 x 500 mm
            control FANUC 21 iMB
            control mit FANUC MANUAL GUIDE
            spindle turning speed range 60 - 8000 U/min
            spindle taper SK 40
            spindle taper DIN 69871 A
            table load max. 500 kg
            rapid traverse X/Y/Z axis 30 m/min
            ATC 30 Pos
            workpiece diameter at full load 80 mm
            tool diameter if 2 vacant positi. 120 mm
            tool length - max. 250 mm
            weight of tools max. 7 kg
            total power requirement 30 kVA
            weight of the machine ca. 4,5 t
            dimensions of machine L x W x H 2,4 x 2,2 x 2,46 m
            Description :
            Accessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C;
            2 machine vices, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FIRST V 43


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06030 · milling machining centers - vertical

          FIRST - V 43 - - 2007 - HEIDENHAIN, TNC 530

          Technical details
          x-travel 1100 mm︱y-travel 600 mm︱z-travel 500 mm︱table surface area 1300 x 600 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 10.000 U/min︱ATC 40 Pos︱control HEIDENHAIN, TNC 530 ︱total power requirement kW︱weight of the machine ca. 8,8 t︱dimensions of machine L x W x H 2,58 x 3,04 x 2,35 m︱
          Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant
            x-travel 1100 mm
            y-travel 600 mm
            z-travel 500 mm
            table surface area 1300 x 600 mm
            spindle taper SK 40
            spindle turning speed - stepless 10.000 U/min
            ATC 40 Pos
            control HEIDENHAIN, TNC 530
            weight of the machine ca. 8,8 t
            dimensions of machine L x W x H 2,58 x 3,04 x 2,35 m
            Description :
            Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws
            160 mm;
            various tool holders, chip conveyor, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FIRST MCV 600


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06041 · milling machining centers - vertical

          FIRST - MCV 600 - - 2006 - HEIDENHAIN TNC 530

          Technical details
          x-travel 610 mm︱y-travel 500 mm︱z-travel 510 mm︱table surface area 1000 x 460 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 120 - 8000 U/min︱spindle drive 7,5 kW︱max. torque on the spindle 190 Nm︱feeds -stepless- 1 - 8000 mm/min︱rapid traverse X/Y/Z axis 24 / 24 / 18 m/min︱table load capacity max. 800 kg︱spindle throat 510 mm︱distance spindle nose/ table min./ max. 120 / 630 mm︱ATC 24 Pos︱diameter of tools max. 100 mm︱tool length - max. 300 mm︱weight of tools max. 10 kg︱control HEIDENHAIN TNC 530 ︱dimensions of machine L x W x H 2,36 x 2,45 x 2,54 m︱total power requirement kW︱
          Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 175 mm; hydr. vice make HILMA, model NC 125, width of jaws 125 mm; various tool holders, chip conveyor, coolant
            x-travel 610 mm
            y-travel 500 mm
            z-travel 510 mm
            table surface area 1000 x 460 mm
            spindle taper SK 40
            spindle turning speed - stepless 120 - 8000 U/min
            spindle drive 7,5 kW
            max. torque on the spindle 190 Nm
            feeds -stepless- 1 - 8000 mm/min
            rapid traverse X/Y/Z axis 24 / 24 / 18 m/min
            table load capacity max. 800 kg
            spindle throat 510 mm
            distance spindle nose/ table min. 120 / 630 mm
            ATC 24 Pos
            diameter of tools max. 100 mm
            tool length - max. 300 mm
            weight of tools max. 10 kg
            control HEIDENHAIN TNC 530
            dimensions of machine L x W x H 2,36 x 2,45 x 2,54 m
            Description :
            Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 175 mm;
            hydr. vice make HILMA, model NC 125, width of jaws 125 mm;
            various tool holders, chip conveyor, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical CHIRON FZ 08 W


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06510 · milling machining centers - vertical

          CHIRON - FZ 08 W - - 2001 - SIEMENS, 840 D

          Technical details
          x-travel 300 mm︱y-travel 250 mm︱z-travel 250 mm︱table surface area 2 x 550 x 300 mm︱spindle taper HSK-A 32 ︱spindle taper DIN 69893 ︱spindle turning speed - stepless 20 - 15.000 U/min︱spindle motor 7,4 kW︱max. torque on the spindle max. 23 Nm︱spindle throat 200 - 450 mm︱distance table - lower edge spindle 170 - 420 mm︱power feed x/y/z 2000 / 2000 / 3000 N︱rapid traverse longitudinal and cross 40 m/min︱rapid traverse vertical 60 m/min︱coolant tank 100 l︱control SIEMENS, 840 D ︱total power requirement kW︱weight of the machine ca. 2,2 t︱dimensions of machine L x W x H 2,75 x 1,45 x 2,25 m︱
          Accessories: various tool fixtures, coolant
            x-travel 300 mm
            y-travel 250 mm
            z-travel 250 mm
            table surface area 2 x 550 x 300 mm
            spindle taper HSK-A 32
            spindle taper DIN 69893
            spindle turning speed - stepless 20 - 15.000 U/min
            spindle motor 7,4 kW
            max. torque on the spindle max. 23 Nm
            spindle throat 200 - 450 mm
            distance table - lower edge spin. 170 - 420 mm
            power feed x/y/z 2000 / 2000 / 3000 N
            rapid traverse longitudinal and . 40 m/min
            rapid traverse vertical 60 m/min
            coolant tank 100 l
            control SIEMENS, 840 D
            weight of the machine ca. 2,2 t
            dimensions of machine L x W x H 2,75 x 1,45 x 2,25 m
            Description :
            Accessories: various tool fixtures, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical EMCO VMC 300


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06500 · milling machining centers - vertical

          EMCO - VMC 300 - - 2000 - SIEMENS, ShopMill

          Technical details
          x-travel 420 mm︱y-travel 330 mm︱z-travel 250 mm︱table surface area 850 x 325 mm︱spindle taper SK 40 ︱spindle turning speed range 0 - 5000 U/min︱power feed x/y/z 6000/6000/8800 N︱rapid traverse 12 m/min︱ATC 12 Pos︱tool diameter max. 63 mm︱tool length - max. 220 mm︱control SIEMENS, ShopMill ︱total power requirement 15 kVA︱weight of the machine ca. 2,6 t︱dimensions of machine L x W x H 2,40 x 2,33 x 2,30 m︱
          Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant
            x-travel 420 mm
            y-travel 330 mm
            z-travel 250 mm
            table surface area 850 x 325 mm
            spindle taper SK 40
            spindle turning speed range 0 - 5000 U/min
            power feed x/y/z 6000/6000/8800 N
            rapid traverse 12 m/min
            ATC 12 Pos
            tool diameter max. 63 mm
            tool length - max. 220 mm
            control SIEMENS, ShopMill
            total power requirement 15 kVA
            weight of the machine ca. 2,6 t
            dimensions of machine L x W x H 2,40 x 2,33 x 2,30 m
            Description :
            Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical EMCO VMC 300


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06501 · milling machining centers - vertical

          EMCO - VMC 300 - - 2000 - SIEMENS SINUMERIK 820 D

          Technical details
          x-travel 420 mm︱y-travel 330 mm︱z-travel 250 mm︱table surface area 650 x 325 mm︱spindle taper SK 40 ︱spindle turning speed range 0 - 5000 U/min︱power feed x/y/z 6000/6000/8800 N︱rapid traverse 12 m/min︱ATC 12 Pos︱tool diameter max. 63 mm︱tool length - max. 220 mm︱control SIEMENS SINUMERIK 820 D ︱total power requirement 15 kVA︱weight of the machine ca. 2,6 t︱dimensions of machine L x W x H 2,43 x 1,76 x 2,30 m︱
          Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant
            x-travel 420 mm
            y-travel 330 mm
            z-travel 250 mm
            table surface area 650 x 325 mm
            spindle taper SK 40
            spindle turning speed range 0 - 5000 U/min
            power feed x/y/z 6000/6000/8800 N
            rapid traverse 12 m/min
            ATC 12 Pos
            tool diameter max. 63 mm
            tool length - max. 220 mm
            control SIEMENS SINUMERIK 820 D
            total power requirement 15 kVA
            weight of the machine ca. 2,6 t
            dimensions of machine L x W x H 2,43 x 1,76 x 2,30 m
            Description :
            Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HURCO BMC 2416/SSM


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06034 · milling machining centers - vertical

          HURCO - BMC 2416/SSM - - 1999 - ULTIMAX SSM

          Technical details
          x-travel 610 mm︱y-travel 405 mm︱z-travel 510 mm︱table surface area 760 x 400 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 80 - 8000 U/min︱spindle drive 7,5 kW︱max. torque on the spindle max. 142 Nm︱feeds 3,0 - 7600 mm/min︱rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min︱distance table / vertical spindle max. 600 mm︱table load 350 kg︱no. of tools in magazin 24 ︱workpiece diameter at full load 80 mm︱tool length - max. 300 mm︱weight of tools max. 6,8 kg︱control ULTIMAX SSM ︱total power requirement 18 kVA︱weight of the machine ca. 4,1 t︱
          Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant
            x-travel 610 mm
            y-travel 405 mm
            z-travel 510 mm
            table surface area 760 x 400 mm
            spindle taper SK 40
            spindle turning speed - stepless 80 - 8000 U/min
            spindle drive 7,5 kW
            max. torque on the spindle max. 142 Nm
            feeds 3,0 - 7600 mm/min
            rapid motion -longitudinal/cross. 24 / 24 / 15 m/min
            distance table / vertical spindl. max. 600 mm
            table load 350 kg
            no. of tools in magazin 24
            workpiece diameter at full load 80 mm
            tool length - max. 300 mm
            weight of tools max. 6,8 kg
            control ULTIMAX SSM
            total power requirement 18 kVA
            weight of the machine ca. 4,1 t
            Description :
            Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor,
            coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MATEC 35 L


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06044 · milling machining centers - vertical

          MATEC - 35 L - - 1998 - HEIDENHAIN, TNC 426

          Technical details
          x-travel 2000 mm︱y-travel 600 mm︱z-travel 500 mm︱table surface area 2500 x 650 mm︱spindle taper SK 40 ︱control HEIDENHAIN, TNC 426 ︱ATC 36 Pos︱total power requirement 60 kW︱weight of the machine ca. 7,5 t︱
          - with coolant through spindle - Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - new spindle on X-axis in 2020
            x-travel 2000 mm
            y-travel 600 mm
            z-travel 500 mm
            table surface area 2500 x 650 mm
            spindle taper SK 40
            control HEIDENHAIN, TNC 426
            ATC 36 Pos
            total power requirement 60 kW
            weight of the machine ca. 7,5 t
            Description :
            - with coolant through spindle -

            Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm;
            2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm;
            various tool holders, chip conveyor, coolant

            - new spindle on X-axis in 2020


          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAZAK MTV 655/60


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06033 · milling machining centers - vertical

          MAZAK - MTV 655/60 - - 1996 -

          Technical details
          x-travel 1500 mm︱y-travel 650 mm︱z-travel 650 mm︱size of pallet 1740 x 650 mm︱spindle taper SK 50 ︱spindle turning speed range 25 - 6000 U/min︱feeds longditudinal/cross/vertical max. 8 mm/min︱rapid traverse longitudinal and cross 26 m/min︱rapid traverse vertical 20 m/min︱spindle throat 665 mm︱distance spindle nose and table 200 / 850 mm︱drilling in full material 50 mmø︱threading M 45 ︱ATC 60 Pos︱tool diameter 125 mm︱wotkpiece diameter with 2 vacant positions 260 mm︱workpiece length 400 mm︱weight of tools max. 20 kg︱spindle drive 18,5 kW︱max. torque on the spindle max. 758 Nm︱
          Accessories: chip conveyor, coolant
            x-travel 1500 mm
            y-travel 650 mm
            z-travel 650 mm
            size of pallet 1740 x 650 mm
            spindle taper SK 50
            spindle turning speed range 25 - 6000 U/min
            feeds longditudinal/cross/vertic. max. 8 mm/min
            rapid traverse longitudinal and . 26 m/min
            rapid traverse vertical 20 m/min
            spindle throat 665 mm
            distance spindle nose and table 200 / 850 mm
            drilling in full material 50 mmø
            threading M 45
            ATC 60 Pos
            tool diameter 125 mm
            wotkpiece diameter with 2 vacant. 260 mm
            workpiece length 400 mm
            weight of tools max. 20 kg
            spindle drive 18,5 kW
            max. torque on the spindle max. 758 Nm
            Description :
            Accessories: chip conveyor, coolant
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HURON BX II


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06042 · milling machining centers - vertical

          HURON - BX II - - 1986 - FANUC 11 MA

          Technical details
          x-travel 1050 mm︱y-travel 560 mm︱z-travel 510 mm︱table-size 1200 x 560 mm︱spindle taper ISO 50 ︱turning speed range 15 - 4000 U/min︱feeds longditudinal/cross/vertical 1 - 3000 mm/min︱rapid motion -longitudinal/cross/vertical 10 m/min︱distance spindle nose and table 150 - 660 mm︱distance spindle center to column max. 650 mm︱table load max . 1 t︱no. of tools in magazin 24 ︱tool diameter 110 mm︱workpiece length 350 mm︱weight of tools max. 15 kg︱spindle drive 7,5 kW︱control FANUC 11 MA ︱total power requirement 13 kW︱weight of the machine ca. 9,3 t︱dimensions of machine L x W x H 3,55 x 2,64 x 2,68 m︱
            x-travel 1050 mm
            y-travel 560 mm
            z-travel 510 mm
            table-size 1200 x 560 mm
            spindle taper ISO 50
            turning speed range 15 - 4000 U/min
            feeds longditudinal/cross/vertic. 1 - 3000 mm/min
            rapid motion -longitudinal/cross. 10 m/min
            distance spindle nose and table 150 - 660 mm
            distance spindle center to colum. max. 650 mm
            table load max . 1 t
            no. of tools in magazin 24
            tool diameter 110 mm
            workpiece length 350 mm
            weight of tools max. 15 kg
            spindle drive 7,5 kW
            control FANUC 11 MA
            total power requirement 13 kW
            weight of the machine ca. 9,3 t
            dimensions of machine L x W x H 3,55 x 2,64 x 2,68 m
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAZAK VQC 20/40


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06032 · milling machining centers - vertical

          MAZAK - VQC 20/40 - - 1984 - MAZATROL M 1

          Technical details
          x-travel 1000 mm︱y-travel 508 mm︱z-travel 460 mm︱size of pallet 1240 x 550 mm︱numbers of pallets 2 ︱workpiece weight 800 kg︱spindle taper ISO 40 ︱spindle motor 5,5 kW︱turning speed range 28 - 4000 U/min︱no. of tools in magazin 30 ︱control MAZATROL M 1 ︱total power requirement kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 4,50 x 3,00 x 2,65 m︱
          acc.: chip conveyor
            x-travel 1000 mm
            y-travel 508 mm
            z-travel 460 mm
            size of pallet 1240 x 550 mm
            numbers of pallets 2
            workpiece weight 800 kg
            spindle taper ISO 40
            spindle motor 5,5 kW
            turning speed range 28 - 4000 U/min
            no. of tools in magazin 30
            control MAZATROL M 1
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 4,50 x 3,00 x 2,65 m
            Description :
            acc.: chip conveyor
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Hans Klein Werkzeugmaschinenhandel GmbH

          Contacter le commerçant



            Hans Klein GmbH Werkzeugmaschinenhandel
           Dans le Muehlgut 2-4
            77815 - Buhl
            Allemagne
            0049 (0) 7223 9617-0 "> 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de

          Profil de commerçant

          Histoire

          1967
          La société «Hans Klein Dreherei - Vorrichtungsbau - Formenbau» est créée par Hans Klein dans la maison de ses parents, sur une surface de 70 m².

          1969
          Pose de la première pierre sur le nouvel emplacement de l'entreprise. Sur un terrain de 6.000 m², Hans Klein est en train de construire un atelier de fabrication comprenant un immeuble de bureaux, d’une superficie de 500 m².
          Site 6000 qm

          1972
          En plus de la production, il se lance dans le commerce de machines-outils d'occasion.

          1973/74
          Hans Klein accorde plus d'importance au commerce et achève la production.

          1977
          L'entreprise individuelle est transformée en société "GmbH"

          1979/80
          Pour développer sa capacité de stockage, Hans Klein construit un nouvel entrepôt. Sa surface est de 1.600 m², la capacité de la grue est de 20 tonnes.
          nouvel entrepôt

          1982/83
          Il est suivi d'un agrandissement de l'immeuble de bureaux.

          1997/98
          Afin de répondre à un besoin toujours croissant d'espace supplémentaire, Hans Klein loue un entrepôt externe à Ottersweier, situé à 10 km du site de l'entreprise. Si vous disposez de plus de m² 2.500, vous pouvez afficher d'autres machines. Une grue tonnes 35 est disponible.
          deuxième entrepôt

          2001/02
          Hans Klein achète un pot de 3500 m² sur le site de l'entreprise. Un nouvel entrepôt d'une surface de 1700 m² est construit et une grue d'une capacité de tonnes 50 est installée. La salle louée est effacée.
          site acheté

          Contact

          Hans Klein Machine Tool Trade GmbH
          Dans le Muehlgut 2-4
          D-77815 Buhl-Weitenung
          Tél.: + 49 (0) 7223 - 96 17-0
          Fax.: + 49 (0) 7223 - 5 85 12
          Email: info@klein-werkzeugmaschinen.de
          Page d'accueil: www.klein-werkzeugmaschinen.de





          Your next vertical milling machine from LagerMaschinen
          Efficiency at hand with a vertical milling machine

          A vertical milling machine is a crucial piece of equipment for the machining of solid materials. Milling machines are capable of performing a wide variety of tasks both simple and complex. From planing and drilling to contouring a vertical milling machine is essential for optimizing the efficiency of your business or home workshop. Shop for the vertical milling machine best suited to your individual needs at LagerMaschinen the ideal platform for finding used machinery in your area and price range.

          LagerMaschinen: your home for vertical milling machines

          Milling machines are differentiated by the orientation of the main spindle. A vertical milling machine employs a vertically oriented spindle and is generally considered one of the most versatile varieties. The machine can be manually operated or set to function using CNC (Computer Numerical Control). Further subcategories of vertical milling machines are the turret and bed style machines. Although the turret machine offers the most versatility the bed style vertical milling machine is best suited to larger scale machining projects.

          Show your business acumen by buying used machinery

          LagerMaschinen is an ideal destination for those looking to make the most of their time and money. This site enables users to search for the best used machinery to suit their individual needs or those of their business. Finding equipment such as a vertical milling machine based on price or location couldn't be easier on LagerMaschinen's user-friendly site. Whether you're in the market for a vertical milling machine or any other piece of equipment you can find it here quickly and easily.

          Hans Klein Werkzeugmaschinenhandel GmbH   77815 - Bühl Im Mühlgut 2-4 Deutschland
          Hans Klein Werkzeugmaschinenhandel GmbH

          Im Mühlgut 2-4



          Contact Trader


            Hans Klein Werkzeugmaschinenhandel GmbH
           Im Mühlgut 2-4
            77815 - Bühl
            Deutschland
            0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
            Contact person:

           




          Machine category


          4-Walzen - Blechbiegemaschine · Abkantpresse - hydraulisch · Abläng- und Zentriermaschine · Absaugung · Aufspannplatte · Ausklinkmaschine · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrkopf · Bügelsäge · Bügelsägeautomat · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge - Leichtmetall · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Einständerpresse - Hydraulisch · Entgratmaschine · Exzenterpresse - Doppelständer · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Flexibles Fertigungssystem · Fräsmaschine - Universal · Gewindefräsmaschine · Handabkantmaschine · Härteofen · Kaltkreissäge - Automatik · Langdrehautomat · Leit- und Zugspindeldrehmaschine · Lochstanzen · Magnetspannplatte · Mehrspindelstangenautomat · Messmaschine · Nachdrehbank · Presse bis 5000 KN · Profilstahlschere - Kombiniert · Radialbohrmaschine · Rahmenpresse - Hydraulisch · Rundschleifmaschine - Außen · Rundtaktmaschine · Rundtisch · Schraubstock · Schweißanlage · Schweißdrehtisch · Senkerodiermaschine · Spannfutter · Stangenlader · Stangenzuführung · Stanz- und Nibbelmaschine · Stähleschleifmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tischbohrmaschine · Trockenofen · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Winkelschere ·