,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Planer-Type Milling M-C - Double Column

          Machinelist: Planer-Type Milling M/C - Double Column


          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column ZAYER TEBAS-5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-721 · Planer-Type Milling M/C - Double Column

          ZAYER - TEBAS-5000 - - 2013 - iTNC-530 HSCI

          Technical details
          x-travel 5.000 mm︱y-travel 3.750 mm︱z-travel 1.250 mm︱Control iTNC-530 HSCI ︱table-size 5.200 x 2.200 mm︱distance between columns 3.000 mm︱feeds 50.000 mm︱feeds 30.000 mm/min︱milling head 0.001º/0.001º ︱tool taper DIN 69871 AD 50 ︱number of spindle speeds 6.000 U/min/rpm︱transmission ratio 3 ︱spindle drive 43 kW︱tool change unit 20 - fach ( Vertikal) ︱Internal cooling system 20 bar︱Chip coveyor 2 ︱handwheel HEIDENHAIN HR-520 ︱total power requirement 122,89 kVA︱weight of the machine ca. 33 t︱Measuring system M&H PS 20.41
          Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in the upper side of the right column INCLUDED Automatic support for automatic head change (45º head) in the lower side of the right column INCLUDED Tool changer and magazine: Tool change Vertical Magazine positions 20 Max tool diameter with adjacent positions 125 mm. Max tool diam. with adjacent positions free 240 mm. Max tool length 300 mm. Max tool weight 25 kg. Other equipment: Internal 20 Bar and external coolant 2 longitudinal chip conveyors 1 cross chip conveyor Knoll coolant system Integral protecting guards without ceiling ICAL system for head calibration Portable handwheel Part touch probe Water gun to clean parts Lamp under the bridge
            x-travel 5.000 mm
            y-travel 3.750 mm
            z-travel 1.250 mm
            Control iTNC-530 HSCI
            table-size 5.200 x 2.200 mm
            distance between columns 3.000 mm
            feeds 50.000 mm
            feeds 30.000 mm/min
            milling head 0.001º/0.001º
            tool taper DIN 69871 AD 50
            number of spindle speeds 6.000 U/min/rpm
            transmission ratio 3
            spindle drive 43 kW
            tool change unit 20 - fach ( Vertikal)
            Internal cooling system 20 bar
            Chip coveyor 2
            handwheel HEIDENHAIN HR-520
            total power requirement 122,89 kVA
            weight of the machine ca. 33 t
            Measuring system M&H PS 20.41
            Description :
            Headstocks:
            Universal Auto Indexing Head 45º 0.001º/0.001º
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 6.000 rpm
            Speed ranges 3
            Main spindle power 43 kW
            Direct output head reduction 1:2,29 INCLUDED
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 2.000 rpm
            Automatic support for automatic head change (direct exit head) in the upper
            side of the right column INCLUDED
            Automatic support for automatic head change (45º head) in the lower side of the
            right column INCLUDED
            Tool changer and magazine:
            Tool change Vertical
            Magazine positions 20
            Max tool diameter with adjacent positions 125 mm.
            Max tool diam. with adjacent positions free 240 mm.
            Max tool length 300 mm.
            Max tool weight 25 kg.

            Other equipment:
            Internal 20 Bar and external coolant
            2 longitudinal chip conveyors
            1 cross chip conveyor
            Knoll coolant system
            Integral protecting guards without ceiling
            ICAL system for head calibration
            Portable handwheel
            Part touch probe
            Water gun to clean parts
            Lamp under the bridge



        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find a double column planer-type milling M/C here
          Discover why milling is a popular metalworking technique

          There are a wide variety of milling machines available to industry professionals today. One option is the planing process whereby the milling surface and the workpiece are moved in opposite directions to one another. This is in contrast to the process of shaping where the workpiece remains stationary. A double column planer-type milling M/C can be used to form a variety of materials from wood to heavy metals. Find the best in used machinery at LagerMaschinen your source for quality industrial machines.

          Planer-style milling machines offer many advantages

          Planing is a versatile approach to the machining of solids. Both flat surfaces and notched and grooved surfaces can be produced by a double column planer-type milling M/C. Planing is used mostly for the creating of linear surfaces as opposed to rounded ones. If you're in the market for a double column planer-type milling M/C why not check out the used models available at LagerMaschinen. You can save yourself time and money by shopping here for used machinery.

          LagerMaschinen: making the most of your time and money

          Investing in used machinery is a smart plan for your business. Moreover shopping for used equipment online not only makes the most of your budget but of your valuable time as well. For example you're looking for a double column planer-type milling M/C you can use LagerMaschinen's user-friendly site to browse by model price or location and find the best used machine for your business' needs. For the best selection in metalworking equipment and other industrial machinery check out LagerMaschinen.