x-travel 3000 mm︱y-travel 1300 mm︱z-travel 2000 mm︱Control Heidenhain TNC 640 ︱main spindle: ︱max. turning speeds 4000 min/-1︱work table: ︱table-size 1600 x 1200 mm︱max. rotation of the table top 4,5 U/min︱max. table load 6000 kg︱indexing 0,001 (stufenlos) °︱T-slots 7 x 22 x 160 mm︱tool changer: ︱number of tool places 40 Pos.︱tool taper SK50 ︱max. tool diameter 125 / 250 mm︱max. tool length 350 mm︱max. tool weight 20 kg︱feeds: ︱rapid traverse ( x / y / z ) 20 m/min︱

---

In our opinion, the machine is in very good condition Used condition and can be viewed under power by appointment become. The machine produced in one shift. Technical features: - Internal coolant 36 bar, including air cooling through the spindle, coolant container 500 liters - Linear scales Heidenhain in x, y and z axes - Linear guides size. 55 in x, y and z axes - Electronic thermal compensation of the y-axis - Mechanical compensation of the y-axis via 2 mechanical cylinders - Hydraulic weight compensation in the z-axis - Preloaded ball screws grade DIN69051 in the x, y and z axes - Synchronized tapping/spindle orientation - Automatic central lubrication - Electrical cabinet with air conditioning - work lamp - Operating instructions in German - RS 232 C, RJ 45, Ethernet communication system and TELESERVICE - Foot pedal for tool changing - Splash protection panel, in the front area with large sliding doors and 2 viewing windows, in the rear area on the side of the boom a large sliding door, with safety limit switches Accesories: - x-axis telescopic cover with step grid - Handwheel - LU A- automatic universal swivel head, division (a/b axis) 2.5° x 2.5°, 144 x 144 positions with Heidenhain direct micro rotary encoder on both levels, incl. automatic. Lubrication system - 2x hinged chip conveyors (1x front, 1x rear) ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 1100 mm︱y-travel 700 mm︱z-travel 500 mm︱table dimensions 1700 x 550 mm︱ 850 kg︱main spindle: ︱turning speed range - main spindle 40 - 1800 min/-1︱drive capacity - main spindle 9 kW︱tool taper ISO-50 ︱rapid traverse: ︱rapid traverse X/Y 4000 mm/min︱feed X/Y 1000 mm/min︱

---

Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. ***Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist.*** ***Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!***

x-travel 1600 mm︱y-travel 720 mm︱z-travel 760 mm︱Control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱work table: ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 80 mm︱feeds: ︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,76 x 2,85 x 3,05 m︱

---

In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - The machine has a universal milling head ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 1320 mm︱y-travel 345 mm︱z-travel 400 mm︱max. turning speeds 2240 min/-1︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool changer: ︱number of tool places 32 Pos.︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,4 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 73,730 h - Spindle hours: 16,362 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 160 mm︱z-travel 400 mm︱

---

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,2 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 560 mm︱y-travel 560 mm︱z-travel 510 mm︱control Siemens ︱main spindle: ︱tool taper HSK 63 A ︱turning speed range - main spindle 45 - 12000 min/-1︱drive capacity - main spindle 26 kW︱number of tool places 42 Pos.︱

---

In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. Technical features: - IKZ - direct measuring system in all axes Accesories: - chip conveyor ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83 / 57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80 / 130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0 / 10,01 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14H7) Stk.︱T-slot spacing 63 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83/57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0/10,1 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14 H7) Stk.︱T-slot spacing 63 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. The spindle makes noise (see video). The machine has been checked by DMG and maintains accuracy. According to the DMG, no action is required. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 82/57 Nm︱rotary table: ︱table surface area 630 x 500 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 16 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 6 kg︱change-time chip to chip 12/15 sec︱change-time tool to tool 9/12 sec︱T-slots (number x width x distance) 7 Stk. / B14 mm / 63 mm mm︱center hole d30 H6 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 360 l - ShopMill - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet - 3+2 axles Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Siemens 840D ︱Number of boring spindles 2 St.︱spindle distance 400 mm︱spindle turning speed range 50 - 10000 U/min︱spindle drive 18 kW︱Number of working hours ca. 63015 h︱spindle hours ca. 32870 h︱ ︱no. of tables 1 ︱no. of clamping positions 4 ︱max. workpiece weight 450 kg︱tool magazin: ︱number of tool places 60 (120) Pos.︱tool taper HSK A63 ︱max. tool diameter 70 mm︱max. tool length 300 mm︱max. tool weight 10 kg︱

---

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. - There are 2 identical machines available ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***

x-travel 720 mm︱y-travel 850 mm︱z-travel 850 mm︱Control Fanuc Series 31i-Model A5 ︱main spindle: ︱number of spindles 1 Stück︱turning speed range - main spindle 50 - 12.000 min/-1︱drive capacity - main spindle 30/25 kW︱ ︱no. of tables 2 ︱table-size 500 x 500 mm︱max. workpiece dimensions Ø750 x 700 mm︱max. workpiece weight 650 kg︱rotating range 360 °︱swivelling range +5 / -95 °︱tool magazin: ︱number of tool places 240 Pos.︱tool taper BT40 ︱max. tool diameter 125/216 mm︱max. tool length 400 mm︱

---

In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Technical features: - 5-axis machining center - Pallet change time: 40 sec - 240 tool slots ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 1600 mm︱y-travel 800 mm︱z-travel 800 mm︱control MAHO CNC 425 ︱main spindle: ︱turning speed range - main spindle 20 - 4000 min/-1︱drive capacity - main spindle 22 kW︱rotary table: ︱table surface area 1250 x 980 mm︱T-slots 18H7 ︱center bore 42mm H7 ︱max. table load 2000 kg︱tool changer: ︱tool taper ISO 50 ︱number of tool places 30 Pos.︱max. tool diameter 100 mm︱max. tool length 400 mm︱max. tool weight 20 kg︱feeds: ︱feed speeds 1-8000 mm/min︱

---

In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - Spindle re-stored in April 2018 - Automatic swivel head horizontal/vertical ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 400 mm︱y-travel 225 mm︱z-travel 375 mm︱Control Siemens Sinumerik ︱main spindle: ︱turning speed range - main spindle 50 - 10.000 min/-1︱drive capacity - main spindle 3,7 / 5,5 kW︱tool changer: ︱number of tool places 10 Pos.︱tool taper BT 30 ︱tool diameter 60 mm︱tool length - max. 200 mm︱weight of tools max. 6 kg︱chip to chip time 15,33 s︱rapid traverse: ︱rapid traverse ( x / y / z ) 10.000 mm/min︱

---

In our opinion, the machine is in very good condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 800 mm︱y-travel 540 mm︱z-travel 620 mm︱control Siemens Sinumerik 828D ︱main spindle: ︱turning speed range - main spindle 50 - 10.000 min/-1︱drive capacity - main spindle 17 kW︱tool taper SK 40 ︱work table: ︱table surface area 1000 x 550 mm︱T-slots (number x width x distance) 5 / 18 / 100 mm︱max. workpiece weight 850 kg︱tool changer: ︱number of tool places 30 Pos.︱change-time tool to tool 2,5 sec︱max. tool diameter 85 / 130 mm︱max. tool length 300 mm︱max. tool weight 7 kg︱total power requirement 27 kW︱weight of the machine ca. 5,15 t︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 1050 mm︱y-travel 530 mm︱z-travel 630 mm︱control Heidenhain iTNC 530 ︱distance spindle /table 85 - 715 mm︱main spindle: ︱max. turning speeds 10000 min/-1︱drive capacity - main spindle 17,4 kW︱tool taper SK 40 ︱work table: ︱table surface area 1150 x 560 mm︱max. table load 700 kg︱T-slots 5 x 18 x 100 ︱tool changer: ︱tool taper SK 40 ︱number of tool places 24 Pos.︱max. tool diameter 90 mm︱max. tool length 250 mm︱max. tool weight 7 kg︱change-time chip to chip 2,5 sec︱

---

In our opinion, the machine is in very good condition and can be inspected under power by appointment. Technical features: - Spindle re-stored in January 2023 - First commissioning: July 2016 ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 500 mm︱y-travel 700 mm︱z-travel 500 mm︱A-axis 240 (-120/+120) °︱C-Axis 360 °︱control Siemens 840 D ︱work table: ︱faceplate diameter 440 mm︱T-slot - width 14 mm︱T-slot - distance 75 mm︱max. table load 400 kg︱main spindle: ︱max. turning speeds 20.000 min/-1︱tool taper HSK 63 A ︱tool magazin: ︱workpiece length 330 mm︱tool diameter 125 mm︱change-time chip to chip 4,5 sec︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 2,5 x 5,2 x 3,5 m︱

---

x-travel 850 mm︱y-travel 510 mm︱z-travel 630 mm︱Control Heidenhain TNC 426 ︱main spindle: ︱turning speeds 8.000 U/min︱power capacity 7,5 / 10 kW︱torque 90 Nm︱tool taper SK 40 ︱work table: ︱table surface area 1000 x 450 mm︱Table load max. 500 kg︱no. of tools in the magazine 24 Stück︱rapid traverse ( x / y / z ) 20 m/min︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱digital readout Heidenhain ND7013 ︱table surface area 800 x 480 mm︱turning speed range - main spindle 25 - 3.000 min/-1︱main drive 6 kW︱vertical head swivelling +90 / -90 Grad︱feed 6 - 500 mm/min︱rapid traverse 1,5 m/min︱Overall size 2.235 x 1.875 mm︱machine weight ab. 1.600 kg︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - Operating hours: 4,600 h - Spindle hours: 380 h ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 500 mm︱z-travel 320 mm︱control Andronic 2060s ︱main spindle: ︱max. turning speeds 36.000 min/-1︱tool taper HSK 40 E ︱work table: ︱table surface area 550 x 550 mm︱max. table load 450 kg︱tool changer: ︱number of tool places 2,8 x 2 Pos.︱dimensions of the machine ca. m︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. technical features: - incl. tool length measuring system ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.***

x-travel 500 mm︱y-travel 300 mm︱z-travel 400 mm︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***