,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Milling machines

          Machinelist: Milling machines


          Bed Type Milling Machine - Horizontal

          used Milling machines Bed Type Milling Machine - Horizontal SHW UFZ 5 S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1655 · Bed Type Milling Machine - Horizontal

          SHW - UFZ 5 S - - 2001 - Heidenhain TNC 430

          Technical details
          travel -x axis 3.000 mm︱travel -y axis 1.600 mm︱travel -z axis 1.300 mm︱control Heidenhain TNC 430 ︱turning speed range 6.000 U/min︱Number of axles 6 St.︱numbers of positions in the tool changer 66 ︱tool taper SK 50 ︱surface area 2.000 x 1.600 mm︱table load 12.000 kg︱
          Bed Type Milling Machine - Universal | SHW - UFZ 5 S equipped with two chip conveyor and a round table Equipment/accessories: - Rückle round table: type PKTF 55, - Universal milling head UFK milling head holder, 360x1 degree swiveling, - Milling head can be swiveled 180x1 degrees - 4-sided work area paneling with electrical. tumbler - Reinforced coolant system 25 l/min at 25 bar; 500 liters container - 2x chip conveyor ejection height 1250mm - Radio measuring probe - 1 set of fixators - electronic handwheel Further information: - July 2019 Exchange spindle installed - February 2019 Y-axis drive motor replaced - February 2022 new main spindle motor installed - February 2022 Cooling unit overhauled The machine is in very good condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S
            travel -x axis 3.000 mm
            travel -y axis 1.600 mm
            travel -z axis 1.300 mm
            control Heidenhain TNC 430
            turning speed range 6.000 U/min
            Number of axles 6 St.
            numbers of positions in the tool. 66
            tool taper SK 50
            surface area 2.000 x 1.600 mm
            table load 12.000 kg
            Description :
            Bed Type Milling Machine - Universal | SHW - UFZ 5 S
            equipped with two chip conveyor and a round table


            Equipment/accessories:

            - Rückle round table: type PKTF 55,
            - Universal milling head UFK milling head holder, 360x1 degree swiveling,
            - Milling head can be swiveled 180x1 degrees
            - 4-sided work area paneling with electrical. tumbler
            - Reinforced coolant system 25 l/min at 25 bar; 500 liters container
            - 2x chip conveyor ejection height 1250mm
            - Radio measuring probe
            - 1 set of fixators
            - electronic handwheel


            Further information:

            - July 2019 Exchange spindle installed
            - February 2019 Y-axis drive motor replaced
            - February 2022 new main spindle motor installed
            - February 2022 Cooling unit overhauled


            The machine is in very good condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used Milling machines Milling Machine - Vertical FEHLMANN Picomax 90-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1633 · Milling Machine - Vertical

          FEHLMANN - Picomax 90-M - - 2004 - Heidenhain - iTNC 530

          Technical details
          travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30
          Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - dividing head (4th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M
            travel -x axis 705 mm
            travel -y axis 425 mm
            travel -z axis 610 mm
            control Heidenhain - iTNC 530
            turning speed range 50 - 20.000 U/min
            numbers of positions in the tool. 32
            tool taper SK30
            Description :
            Universal Milling Machine | FEHLMANN - Picomax 90-M


            Scope of delivery:

            - extensive package of tools
            - dividing head (4th axis)


            The machine is in a well-maintained condition.

            Please refer to the offer for further technical details.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used Milling machines milling machining centers - horizontal MORI SEIKI NH8000 DCG


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1634 · milling machining centers - horizontal

          MORI SEIKI - NH8000 DCG - - 2008 - FANUC - MSX-701III

          Technical details
          travel -x axis 1.400 mm︱travel -y axis 1.200 mm︱travel -z axis 1.350 mm︱control FANUC - MSX-701III ︱numbers of positions in the tool changer 60 ︱tool taper HSK 100 ︱max. Spindle speed 8.000 U/min.︱max. tool length 800 mm︱max. tool weight 30 kg︱
          Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000
            travel -x axis 1.400 mm
            travel -y axis 1.200 mm
            travel -z axis 1.350 mm
            control FANUC - MSX-701III
            numbers of positions in the tool. 60
            tool taper HSK 100
            max. Spindle speed 8.000 U/min.
            max. tool length 800 mm
            max. tool weight 30 kg
            Description :
            Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG
            equipped with additional 4th axis.


            Equipment:
            - B-axis (rotary table): 360,000 X 0.0001,
            - 2-fold pallet changing system,
            - Pallet dimensions 800 mm x 800 mm,


            The machine is in a well-maintained condition
            with approx. 30.000 (h) Power-On hours.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA FH630SX


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1659 · milling machining centers - horizontal

          TOYODA - FH630SX - - 2007 - FANUC31iMA

          Technical details
          number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA
          Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
            number of spindle speeds 6.000 U/min
            tool taper BT50
            numbers of positions in the tool. 121
            control FANUC31iMA
            Description :
            Milling machining centers - horizontal | TOYODA - FH630SX
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA FH63S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1660 · milling machining centers - horizontal

          TOYODA - FH63S - - 2000 - FANUC16i

          Technical details
          travel -x axis 1.000 mm︱travel -y axis 850 mm︱travel -z axis 750 mm︱spindle turning speed range 35 - 6.000 U/min︱numbers of positions in the tool changer 60 ︱table dimension - longitudinal 630 x 630 mm︱control FANUC16i
          Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63
            travel -x axis 1.000 mm
            travel -y axis 850 mm
            travel -z axis 750 mm
            spindle turning speed range 35 - 6.000 U/min
            numbers of positions in the tool. 60
            table dimension - longitudinal 630 x 630 mm
            control FANUC16i
            Description :
            Milling machining centers - horizontal | TOYODA - FH63S
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630 | FH63 | FH-63 | FH 63
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Milling machines milling machining centers - vertical MTcut V 110 T


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1594 · milling machining centers - vertical

          MTcut - V 110 T - - 2008 -

          Technical details
          travel -x axis 1.100 mm︱travel -y axis 610 mm︱travel -z axis 610 mm︱table dimension (L x W) 1.250 x 610 mm︱tool adaptor SK40 ︱numbers of positions in the tool changer 30 ︱table diameter 250 mm︱
          Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110
            travel -x axis 1.100 mm
            travel -y axis 610 mm
            travel -z axis 610 mm
            table dimension (L x W) 1.250 x 610 mm
            tool adaptor SK40
            numbers of positions in the tool. 30
            table diameter 250 mm
            Description :
            Milling machining centers - vertical | MTcut - V 110 T
            with NC swivel rotary table (TT251HEE08)


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical AXA DBZ


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1476 · milling machining centers - vertical

          AXA - DBZ - - 2007 - Siemens 840 D

          Technical details
          travel -x axis 2x 750 mm︱travel -y axis 500 mm︱travel -z axis 600 mm︱control Siemens 840 D ︱turning speeds 30 - 6.000 U/min︱tool taper SK 40 ︱numbers of positions in the tool changer 22 ︱surface area 2x (1.000 x 500) mm︱Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm︱
          Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:
            travel -x axis 2x 750 mm
            travel -y axis 500 mm
            travel -z axis 600 mm
            control Siemens 840 D
            turning speeds 30 - 6.000 U/min
            tool taper SK 40
            numbers of positions in the tool. 22
            surface area 2x (1.000 x 500) mm
            Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm
            Description :
            Double-place machining center (shuttle operation) | AXA - DBZ


            Additional equipment:
            The machine comes with a 4th axis on each side processing in tack setting.


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags:
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HAAS TM-1 HF


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1590 · milling machining centers - vertical

          HAAS - TM-1 HF - - 2005 - Haas

          Technical details
          travel -x axis 762 mm︱travel -y axis 305 mm︱travel -z axis 406 mm︱control Haas
          Milling machining centers - vertical | Haas - TM-1 HF The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF
            travel -x axis 762 mm
            travel -y axis 305 mm
            travel -z axis 406 mm
            control Haas
            Description :
            Milling machining centers - vertical | Haas - TM-1 HF


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF
          Datasheet
          Request / Contact

          Travelling column milling machine

          used Milling machines Travelling column milling machine FPT SPIRIT 140


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1620 · Travelling column milling machine

          FPT - SPIRIT 140 - - 2014 - Siemens 840 Dsl

          Technical details
          - - - - - travels - - - - - - - - - - -︱travel -x axis 10.000 mm︱travel -y axis 1.500 mm︱travel -z axis 4.000 mm︱- - - spindle - - - - - - - - -︱output 62.5 kW︱turning speed range 262 - 4.000 U/min︱Torque 2.280 Nm︱- - - table - - - - - - - - -︱Size of table plate 2x (2.500 x 3.000) mm︱longitudinal travel 2.000 mm︱max. load 30.000 kg︱solution 0,0005 °︱solution 1,8 sek.︱table turning speeds 1,5 U/min︱- - - further technical details - - - - - - ︱control Siemens 840 Dsl ︱numbers of positions in the tool changer 80 ︱tool taper ISO 50 ︱max. feed 25.000 mm/min︱
          Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"
            - - - - - travels - - - - - - - - - - -
            travel -x axis 10.000 mm
            travel -y axis 1.500 mm
            travel -z axis 4.000 mm
            - - - spindle - - - - - - - - -
            output 62.5 kW
            turning speed range 262 - 4.000 U/min
            Torque 2.280 Nm
            - - - table - - - - - - - - -
            Size of table plate 2x (2.500 x 3.000) mm
            longitudinal travel 2.000 mm
            max. load 30.000 kg
            solution 0,0005 °
            solution 1,8 sek.
            table turning speeds 1,5 U/min
            - - - further technical details . - - -
            control Siemens 840 Dsl
            numbers of positions in the tool. 80
            tool taper ISO 50
            max. feed 25.000 mm/min
            Description :
            Milling machine | SPIRIT 140 - 2014 equipped with
            two HYDROSTATIC rotary boring tables (TRT30).


            The machine has only approx. 9.900 H working hours.

            Equipment:
            - Hydrostatic guideways
            - Cooling system
            - Handwheel with radio transmission (HBG 800-DP)
            - ITC (40 bar)
            - Tool changer (80 pcs. | ISO50)
            - Magazine for changing the milling heads with 3 places
            - Infinitely positionable universal head
            - Horizontal spindle extension (long version)
            - chip conveyor
            - Laser probe with software for tool measurement and breakage control
            - Radio measuring probe (M&H)
            - Pendulum processing with partition


            The machine is in very good condition.


            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.


            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SPIRIT-140 | SPIRIT140"

          Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine HEDELIUS CB 80 - 2300 Magnum


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1593 · Travelling column milling machine

          HEDELIUS - CB 80 - 2300 Magnum - - 2002 - Heidenhain - iTNC426

          Technical details
          travel -x axis 2.300 mm︱travel -y axis 800 mm︱travel -z axis 600 mm︱control Heidenhain - iTNC426 ︱number of spindle speeds 8.000 U/min︱weight of the machine 14.000 kg︱
          Travelling column milling machine | HEDELIUS - CB 80 – 2300 Magnum with chip conveyor The machine is in a well-maintained condition. Further technical data of the machine will follow soon. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CB80 | CB-80 | CB80–2300Magnum | CB80 – 2300Magnum
            travel -x axis 2.300 mm
            travel -y axis 800 mm
            travel -z axis 600 mm
            control Heidenhain - iTNC426
            number of spindle speeds 8.000 U/min
            weight of the machine 14.000 kg
            Description :
            Travelling column milling machine | HEDELIUS - CB 80 – 2300 Magnum
            with chip conveyor


            The machine is in a well-maintained condition.

            Further technical data of the machine will follow soon.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CB80 | CB-80 | CB80–2300Magnum | CB80 – 2300Magnum
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Steinhand GmbH

          Contacter le commerçant



            Steinhand GmbH
           Am Stahlwerk 15
            Agence-street-marketing hattingen.45527
            Allemagne
            +49 (0) 2324 / 977 26 - 01">+49 (0) 2324 / 977 26 - 01
            + 49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de

          Profil de commerçant

          L'APPRÉCIATION, LES SOLUTIONS INCONVENTIONNELLES ET LA FIABILITÉ SONT LA BASE DE NOTRE TRAVAIL - C'EST CE QUE NOUS VOULONS!

          Au fil des années, nous avons acquis une vaste expérience et compétence dans le commerce de machines. Avec nous, vous avez un partenaire fiable à vos côtés pour les machines d'occasion de l'industrie de traitement des métaux. Nous nous sommes spécialisés dans le commerce des tours, des fraiseuses, des aléseuses, des presses et des lignes de production complètes. Nos clients fixent des attentes élevées, auxquelles nous sommes en droit de répondre.

          Vous souhaitez observer nos machines sous tension?

          Vous ne voulez pas faire face à des circonstances non pertinentes?

          Vous insistez sur un service après-vente professionnel?


          Notre société garantit un processus de transaction complet sans soucis. Nous vous conseillerons et vous aiderons de manière professionnelle avec des actes et des actes tout au long du projet. Notre savoir-faire englobe une vaste gamme de services allant de deal financement bien que traitement logistique vers démontage ou mise en service de la machine sur votre site de production. Nous sommes un partenaire solide, que ce soit du côté des acheteurs ou du vendeur!
             

          Nous représentons des machines d'occasion fiables à des prix équitables et des clients globalement satisfaits.

          N'hésitez pas à nous contacter. Nous sommes impatients de travailler avec vous!

          STEINHAND GMBH
          Adresse :
          Wiehagen 10, D-45472 Muelheim dans la Ruhr
          Téléphone: + 49 (0) 208 / 782 39-760
          Fax: + 49 (0) 208 / 78239-685
          Email: info@steinhand.de
          Site web: https://www.steinhand.de





          Find the best selection of used milling machines here
          Milling machines are practical for home or business

          Milling machines are exceptionally versatile tools used to machine a variety of materials, such as metals, woods and synthetics. Milling machines come in a range of sizes from small portable models for home hobbyists to large-scale industrial milling machines for factories. Whether you are looking for vertical or horizontal milling machines, manually operated or computer numerically controlled (CNC), you can find exactly what you need quickly and easily at LagerMaschinen.

          Which milling machine is the best for you?

          Milling machines are generally classified based on the main spindle's orientation. Horizontal milling machines are best suited to heavy materials, bulky or unconventional shaped work pieces, while vertical milling machines offer more advantages for design work and precision cutting. Although some prefer the level of control offered by manually or even mechanically operated machines, some businesses require the efficiency afforded by CNC machines. Regardless of which milling machines best suit your needs, you can find a wide array of used machines at LagerMaschinen.

          Online shopping has never been so easy

          LagerMaschinen offers users a number of distinct advantages. In this day and age, shopping online is a practical solution to strains on a busy schedule. You can browse quickly and easily online, anytime day or night, from the comfort of home or office. Also at LagerMaschinen, you can sort all your searches by price, location or specific brands to save yourself time and money in comparative shopping. From milling machines to grinders to drill presses, you can find the best selection of used machines on the web at LagerMaschinen.

          Steinhand GmbH   45527 - Hattingen Am Stahlwerk 15 Deutschland
          Steinhand GmbH

          Am Stahlwerk 15



          Contact Trader


            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de
            Contact person:

           




          Machine category


          Bandsäge · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Horizontal · CNC Dreh- und Fräszentrum · CNC Dreh- und Schleifzentrum - vertikal · Drehmaschine - zyklengesteuert · Entgratmaschine · Fahrständerfräsmaschine · Feinschleifmaschine · Flachschleifmaschine · Fräsmaschine - Vertikal · Gabelstapler - Diesel · Kopfdrehbank · Kurbelwellenschleifmaschine · Kurvendrehautomat · Langdrehautomat · Portal - Bearbeitungszentrum · Rundschleifmaschine - Außen · Rundtisch · Spitzenlose - Rundschleifmaschine · Tieflochbohrmaschine · Vertikaldrehmaschine · Werkzeugschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal ·