,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Milling machines

          Machinelist: Milling machines


          Bed Type Milling Machine - Universal

          used Milling machines Bed Type Milling Machine - Universal ANAYAK VH PLUS-3000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-610 · Bed Type Milling Machine - Universal

          ANAYAK - VH PLUS-3000 - - 2013 - HEIDENHAIN TNC 530 HSCI

          Technical details
          x-travel 3.000 mm︱y-travel 1.700 mm︱z-travel 1.500 mm︱Control HEIDENHAIN TNC 530 HSCI ︱table-size 3.200 x 1.100 mm︱T-slots 7 ︱T - slots distance 150 mm︱T-slot - distance 22 mm︱table weight 8.000 Kg︱rapid travel x/y/z 20.000 mm/min︱feed 10.000 m/min︱milling head -swivable +/- 45° UAD/ 0.1º/0.1º °︱tool taper ISO-50 DIN 69871 AD ︱spindle turning speed range 60 – 6.000 U/min︱transmission ratio 2 ︱Spindle power 38 ︱Tools changer 30 fach/tools︱Internal cooling system 40 bar︱Chip coveyor Quer ︱Chip coveyor Längs
            x-travel 3.000 mm
            y-travel 1.700 mm
            z-travel 1.500 mm
            Control HEIDENHAIN TNC 530 HSCI
            table-size 3.200 x 1.100 mm
            T-slots 7
            T - slots distance 150 mm
            T-slot - distance 22 mm
            table weight 8.000 Kg
            rapid travel x/y/z 20.000 mm/min
            feed 10.000 m/min
            milling head -swivable +/- 45° UAD/ 0.1º/0.1º °
            tool taper ISO-50 DIN 69871 AD
            spindle turning speed range 60 – 6.000 U/min
            transmission ratio 2
            Spindle power 38
            Tools changer 30 fach/tools
            Internal cooling system 40 bar
            Chip coveyor Quer
            Chip coveyor Längs
          Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Universal NICOLAS CORREA CF 22/25


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-735 · Bed Type Milling Machine - Universal

          NICOLAS CORREA - CF 22/25 - - 2000 - Heidenhain TNC 426

          Technical details
          x-travel 2500 mm︱y-travel 800 mm︱z-travel 800 mm︱control Heidenhain TNC 426 ︱table weight 3500 Kg︱table-size 2500 x 700 mm︱number of spindle speeds 50-4000 U/min/rpm︱Power 22 KW︱taper ISO 50 ︱weight of the machine ca. 10.500 kg︱dimensions of the machine ca. 6605x3315x2730 m︱
            x-travel 2500 mm
            y-travel 800 mm
            z-travel 800 mm
            control Heidenhain TNC 426
            table weight 3500 Kg
            table-size 2500 x 700 mm
            number of spindle speeds 50-4000 U/min/rpm
            Power 22 KW
            taper ISO 50
            weight of the machine ca. 10.500 kg
            dimensions of the machine ca. 6605x3315x2730 m
            Description :

          Datasheet
          Request / Contact

          Machining centre

          used Milling machines Machining centre AWEA FV 960


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-666 · Machining centre

          AWEA - FV 960 - - 2015 - HEIDENHAIN iTNC 530

          Technical details
          travel 960 mm︱length 600 mm︱width 480 mm︱Control HEIDENHAIN iTNC 530 ︱Machine on 9000 ︱Spindle hours 3500 ︱Chip coveyor inkl. ︱handwheel el. ︱round table D 350 ︱table weight 200 Kg︱number of spindle speeds 12000 U/min/rpm︱spindle drive 14/10 kW︱rapid traverse 32/32/24 m/min︱ 30 fach︱spindle taper ISO BT 40 ︱dimensions of the machine ca. 3,1 x 2,3 x 3,1 m︱total power requirement 45 kW︱weight of the machine ca. 7,4 t︱
            travel 960 mm
            length 600 mm
            width 480 mm
            Control HEIDENHAIN iTNC 530
            Machine on 9000
            Spindle hours 3500
            Chip coveyor inkl.
            handwheel el.
            round table D 350
            table weight 200 Kg
            number of spindle speeds 12000 U/min/rpm
            spindle drive 14/10 kW
            rapid traverse 32/32/24 m/min
            30 fach
            spindle taper ISO BT 40
            dimensions of the machine ca. 3,1 x 2,3 x 3,1 m
            total power requirement 45 kW
            weight of the machine ca. 7,4 t
          Datasheet
          Request / Contact

          milling machining centers - universal

          used Milling machines milling machining centers - universal KONDIA Five 400


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-999 · milling machining centers - universal

          KONDIA - Five 400 - - 2011 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 850 mm︱y-travel 500 mm︱z-travel 610 mm︱Control HEIDENHAIN iTNC 530 ︱handwheel inkl ︱Chip coveyor inkl ︱Internal cooling system 40 bar︱Turn table D 400 mm︱number of spindle speeds 12.000 U/min/rpm︱spindle drive 17/10 kW︱Tools changer 40 fach/tools︱spindle taper ISO SK40 ︱total power requirement 28,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 3 x 2.70 x 3,2 m︱
          5-axis simultaneous universal machining center NC rotary swivel table D 400mm 3D infrared probe blown air through spindle flush gun direct measurement system
            x-travel 850 mm
            y-travel 500 mm
            z-travel 610 mm
            Control HEIDENHAIN iTNC 530
            handwheel inkl
            Chip coveyor inkl
            Internal cooling system 40 bar
            Turn table D 400 mm
            number of spindle speeds 12.000 U/min/rpm
            spindle drive 17/10 kW
            Tools changer 40 fach/tools
            spindle taper ISO SK40
            total power requirement 28,5 kW
            weight of the machine ca. 7,7 t
            dimensions of the machine ca. 3 x 2.70 x 3,2 m
            Description :
            5-axis simultaneous universal machining center
            NC rotary swivel table D 400mm
            3D infrared probe
            blown air through spindle
            flush gun
            direct measurement system
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MIKRON-AGIE CHARMILLES XSM 400 U


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-559 · milling machining centers - universal

          MIKRON-AGIE CHARMILLES - XSM 400 U - - 2008 - Heidenhein TNC 530

          Technical details
          x-travel 400 mm︱y-travel 240 mm︱z-travel 350 mm︱rapid traverse 80 m/min︱turning speeds 42.000 U/min︱ 68 fach︱table weight 200 Kg︱Control Heidenhein TNC 530 ︱total power requirement kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. m︱
            x-travel 400 mm
            y-travel 240 mm
            z-travel 350 mm
            rapid traverse 80 m/min
            turning speeds 42.000 U/min
            68 fach
            table weight 200 Kg
            Control Heidenhein TNC 530
            weight of the machine ca. 6,7 t
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 70 Evo Linear


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-970 · milling machining centers - universal

          DMG - DMU 70 Evo Linear - - 2008 - Heidenhain iTNC 530

          Technical details
          x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Heidenhain iTNC 530 ︱Machine on 49.661 h︱Spindle hours 21.077 h︱tool taper SK 40 ︱handwheel el. ︱Speed 18000 U/min︱Tools changer 60 pos.︱NC table Rundtisch ︱b-axis -5/+110 °︱c-axis 360 °︱Internal cooling system 600ltr. Tank, 40 bar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Linear 5-axis SIMULTANEOUS machining -Heidenhain infrared measuring probe -Scratch belt chip conveyor -IKZ paper belt filter 40 bar/600 liters. tank -incl. rotating viewing window, sealing air linear measuring systems -Blow air through the center of the spindle -Oil and emulsion mist separator mechanical -Flushing gun for chip rinsing -Direct position measuring system -Mainly plastic-aluminium processing
            x-travel 750 mm
            y-travel 600 mm
            z-travel 520 mm
            Control Heidenhain iTNC 530
            Machine on 49.661 h
            Spindle hours 21.077 h
            tool taper SK 40
            handwheel el.
            Speed 18000 U/min
            Tools changer 60 pos.
            NC table Rundtisch
            b-axis -5/+110 °
            c-axis 360 °
            Internal cooling system 600ltr. Tank, 40 bar
            Description :
            Linear 5-axis SIMULTANEOUS machining
            -Heidenhain infrared measuring probe
            -Scratch belt chip conveyor
            -IKZ paper belt filter 40 bar/600 liters. tank
            -incl. rotating viewing window, sealing air linear measuring systems
            -Blow air through the center of the spindle
            -Oil and emulsion mist separator mechanical
            -Flushing gun for chip rinsing
            -Direct position measuring system
            -Mainly plastic-aluminium processing
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MIKRON HSM 600 U ProdMod


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-969 · milling machining centers - universal

          MIKRON - HSM 600 U ProdMod - - 2005 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱Control HEIDENHAIN iTNC 530 ︱taper ISO HSK A-63 ︱Tools changer 220 fach/tools︱rapid traverse 50 m/min︱Torque 46 Nm︱feed speeds infinitely variable 20/20/40 m/min︱drive capacity - spindle motor 22 kW︱spindle turning speed range 24.000 U/min︱table weight 150 Kg︱size of pallet 320x320 mm︱a-axis +30/-110 °︱c-axis 360 °︱internal coolant system feed 18-70 bar︱handwheel el ︱Chip coveyor ︱Machine on 131.000 ︱Spindle hours 20.700
            x-travel 800 mm
            y-travel 600 mm
            z-travel 500 mm
            Control HEIDENHAIN iTNC 530
            taper ISO HSK A-63
            Tools changer 220 fach/tools
            rapid traverse 50 m/min
            Torque 46 Nm
            feed speeds infinitely variable 20/20/40 m/min
            drive capacity - spindle motor 22 kW
            spindle turning speed range 24.000 U/min
            table weight 150 Kg
            size of pallet 320x320 mm
            a-axis +30/-110 °
            c-axis 360 °
            internal coolant system feed 18-70 bar
            handwheel el
            Machine on 131.000
            Spindle hours 20.700
            Description :

          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 160 P


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-701 · milling machining centers - universal

          DMG - DMU 160 P - - 2002 - HEIDENHAIN TNCi 530

          Technical details
          x-travel 1600 mm︱y-travel 1250 mm︱z-travel 1000 mm︱Control HEIDENHAIN TNCi 530 ︱tool taper HSK-A63 ︱spindle turning speed range 18000 U/min︱table dimension - cross 1250 mm︱table dimension - longitudinal 1500 mm︱rapid traverse 60 m/min︱feed 20-15000 mm/min︱workpiece weight 4000 kg︱table turning speeds 10 U/min︱Tools changer 60 pos.︱handwheel el. ︱Machine on 49248 ︱Spindle hours 13157 ︱total power requirement kW︱weight of the machine ca. 34 t︱dimensions of the machine ca. 8800 x 8800 x 3500 m︱
          he DMU 160P is in very good condition and can be inspected under power at the seller's premises. under power at the seller's premises. The machine has mainly been used to mill plastic and otherwise aluminium. Description: Spindle HSK63 18.000 1/min approx. 1.000h Minimum lubrication inside/outside Blowing air inside/outside coolant from the outside Tool magazine 60-fold Measuring probe Heidenhain Control Heidenhain TNCi 530 Operating mode 4 Electronic handwheel Repair: --> Tool change unit and the Z-curtain replaced in 2022.
            x-travel 1600 mm
            y-travel 1250 mm
            z-travel 1000 mm
            Control HEIDENHAIN TNCi 530
            tool taper HSK-A63
            spindle turning speed range 18000 U/min
            table dimension - cross 1250 mm
            table dimension - longitudinal 1500 mm
            rapid traverse 60 m/min
            feed 20-15000 mm/min
            workpiece weight 4000 kg
            table turning speeds 10 U/min
            Tools changer 60 pos.
            handwheel el.
            Machine on 49248
            Spindle hours 13157
            weight of the machine ca. 34 t
            dimensions of the machine ca. 8800 x 8800 x 3500 m
            Description :
            he DMU 160P is in very good condition and can be inspected under power at the
            seller's premises.
            under power at the seller's premises.
            The machine has mainly been used to mill plastic and otherwise aluminium.

            Description:
            Spindle HSK63 18.000 1/min approx. 1.000h
            Minimum lubrication inside/outside
            Blowing air inside/outside
            coolant from the outside
            Tool magazine 60-fold
            Measuring probe Heidenhain
            Control Heidenhain TNCi 530
            Operating mode 4
            Electronic handwheel

            Repair:
            --> Tool change unit and the Z-curtain replaced in 2022.

          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Milling machines milling machining centers - vertical MIKRON HSM 400 U-LP WPC


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-446 · milling machining centers - vertical

          MIKRON - HSM 400 U-LP WPC - - 2013 - HEIDENHAIN TNC 530

          Technical details
          x-travel 400 mm︱y-travel 240 mm︱z-travel 350 mm︱b-axis +/-110 °︱number of tools 68 ︱table: EROWA ITS 148 ︱table weight 200 Kg︱Control HEIDENHAIN TNC 530 ︱c-axis 360 °︱rapid traverse 80 m/min︱tool adaptor HSK E40 ︱Internal cooling system 18-70 bar︱Machine on 33837 ︱Spindle hours 16077 ︱weight of the machine ca. 9 t︱
            x-travel 400 mm
            y-travel 240 mm
            z-travel 350 mm
            b-axis +/-110 °
            number of tools 68
            table: EROWA ITS 148
            table weight 200 Kg
            Control HEIDENHAIN TNC 530
            c-axis 360 °
            rapid traverse 80 m/min
            tool adaptor HSK E40
            Internal cooling system 18-70 bar
            Machine on 33837
            Spindle hours 16077
            weight of the machine ca. 9 t
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MORI SEIKI NV 4000 DCG


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-894 · milling machining centers - vertical

          MORI SEIKI - NV 4000 DCG - - 2004 - MAPPS III

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 400 mm︱taper BT 40 ︱Internal cooling system 7 bar︱size of pallet 750 x 450 mm︱number of spindle speeds 12.000 U/min/rpm︱Spindle power 15 kw︱Tools changer 40 fach/tools︱control MAPPS III
          3-axis vertical machining center with pallet changer -chip puller -CNC: MAPPS III
            x-travel 600 mm
            y-travel 400 mm
            z-travel 400 mm
            taper BT 40
            Internal cooling system 7 bar
            size of pallet 750 x 450 mm
            number of spindle speeds 12.000 U/min/rpm
            Spindle power 15 kw
            Tools changer 40 fach/tools
            control MAPPS III
            Description :
            3-axis vertical machining center with pallet changer
            -chip puller
            -CNC: MAPPS III
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column ZAYER TEBAS-5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-721 · Planer-Type Milling M/C - Double Column

          ZAYER - TEBAS-5000 - - 2013 - iTNC-530 HSCI

          Technical details
          x-travel 5.000 mm︱y-travel 3.750 mm︱z-travel 1.250 mm︱Control iTNC-530 HSCI ︱table-size 5.200 x 2.200 mm︱distance between columns 3.000 mm︱feeds 50.000 mm︱feeds 30.000 mm/min︱milling head 0.001º/0.001º ︱tool taper DIN 69871 AD 50 ︱number of spindle speeds 6.000 U/min/rpm︱transmission ratio 3 ︱spindle drive 43 kW︱tool change unit 20 - fach ( Vertikal) ︱Internal cooling system 20 bar︱Chip coveyor 2 ︱handwheel HEIDENHAIN HR-520 ︱total power requirement 122,89 kVA︱weight of the machine ca. 33 t︱Measuring system M&H PS 20.41
          Headstocks: Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1:2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 2.000 rpm Automatic support for automatic head change (direct exit head) in the upper side of the right column INCLUDED Automatic support for automatic head change (45º head) in the lower side of the right column INCLUDED Tool changer and magazine: Tool change Vertical Magazine positions 20 Max tool diameter with adjacent positions 125 mm. Max tool diam. with adjacent positions free 240 mm. Max tool length 300 mm. Max tool weight 25 kg. Other equipment: Internal 20 Bar and external coolant 2 longitudinal chip conveyors 1 cross chip conveyor Knoll coolant system Integral protecting guards without ceiling ICAL system for head calibration Portable handwheel Part touch probe Water gun to clean parts Lamp under the bridge
            x-travel 5.000 mm
            y-travel 3.750 mm
            z-travel 1.250 mm
            Control iTNC-530 HSCI
            table-size 5.200 x 2.200 mm
            distance between columns 3.000 mm
            feeds 50.000 mm
            feeds 30.000 mm/min
            milling head 0.001º/0.001º
            tool taper DIN 69871 AD 50
            number of spindle speeds 6.000 U/min/rpm
            transmission ratio 3
            spindle drive 43 kW
            tool change unit 20 - fach ( Vertikal)
            Internal cooling system 20 bar
            Chip coveyor 2
            handwheel HEIDENHAIN HR-520
            total power requirement 122,89 kVA
            weight of the machine ca. 33 t
            Measuring system M&H PS 20.41
            Description :
            Headstocks:
            Universal Auto Indexing Head 45º 0.001º/0.001º
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 6.000 rpm
            Speed ranges 3
            Main spindle power 43 kW
            Direct output head reduction 1:2,29 INCLUDED
            Taper DIN 69871 AD 50
            Spud ISO 7388-2 B 50
            Spindle speed 2.000 rpm
            Automatic support for automatic head change (direct exit head) in the upper
            side of the right column INCLUDED
            Automatic support for automatic head change (45º head) in the lower side of the
            right column INCLUDED
            Tool changer and magazine:
            Tool change Vertical
            Magazine positions 20
            Max tool diameter with adjacent positions 125 mm.
            Max tool diam. with adjacent positions free 240 mm.
            Max tool length 300 mm.
            Max tool weight 25 kg.

            Other equipment:
            Internal 20 Bar and external coolant
            2 longitudinal chip conveyors
            1 cross chip conveyor
            Knoll coolant system
            Integral protecting guards without ceiling
            ICAL system for head calibration
            Portable handwheel
            Part touch probe
            Water gun to clean parts
            Lamp under the bridge

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA FP 50-80


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-724 · Planer-Type Milling M/C - Double Column

          CORREA - FP 50-80 - - 2010 - HEIDENHAIN iTNC-530

          Technical details
          x-travel 8.000 mm︱y-travel 3.800 mm︱z-travel 1.250 mm︱Control HEIDENHAIN iTNC-530 ︱table-size 8.500 x 2.500 mm︱distance between columns 3.100 mm︱rapid travel x/y/z 10/12.000 mm/min︱feed 7.000 m/min︱milling head Automatisch Drehung ︱number of spindle speeds 4.000 U/min/rpm︱spindle drive 37 kW︱transmission ratio 2 Stufen︱table weight 35.000 Kg︱distance spindle /table 500-1.750 mm︱dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm︱tool change unit 30 pos.︱max. torque on the spindle 718 Nm︱spindle taper ISO ISO 50︱handwheel ︱dimension 19.370 x 5.850 x 5.970 mm︱
          - 5 AXIS BRIDGE TYPE MILLING MACHINES Max height table to underside bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid Feed (X Axis) 10.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle Torque 718 Nm Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED
            x-travel 8.000 mm
            y-travel 3.800 mm
            z-travel 1.250 mm
            Control HEIDENHAIN iTNC-530
            table-size 8.500 x 2.500 mm
            distance between columns 3.100 mm
            rapid travel x/y/z 10/12.000 mm/min
            feed 7.000 m/min
            milling head Automatisch Drehung
            number of spindle speeds 4.000 U/min/rpm
            spindle drive 37 kW
            transmission ratio 2 Stufen
            table weight 35.000 Kg
            distance spindle /table 500-1.750 mm
            dimensions of the machine ca. 19.370 x 5.850 x 5.970 mm
            tool change unit 30 pos.
            max. torque on the spindle 718 Nm
            spindle taper ISO ISO 50
            dimension 19.370 x 5.850 x 5.970 mm
            Description :
            - 5 AXIS BRIDGE TYPE MILLING MACHINES
            Max height table to underside bridge 2.100 mm
            Min/max distance table to spindle 500-1.750 mm
            Rapid Feed (X Axis) 10.000 mm/min
            Rapid Feed (Y,Z Axis) 12.000 mm/min
            Max. Working Feed 7.000 mm/min
            Automatic head C5 E INCLUDED
            B-Axis head swivel ± 190º
            C Axis head rotation ± 360º
            Spindle taper ISO 50
            Spindle speed 4.000 r.p.m.
            Spindle Torque 718 Nm
            Portable Handwheel INCLUDED
            Thermal growth compensation system INCLUDED



          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column NICOLAS CORREA RAPID 50


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-450 · Planer-Type Milling M/C - Double Column

          NICOLAS CORREA - RAPID 50 - - 2005 - FIDIA C20

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control FIDIA C20 ︱table-size 5000x2000 mm︱T-slots 11 ︱T-slot - width 22 mm︱table weight 30000 Kg︱distance between columns 2800 mm︱feed: x-20000 mm/min︱feed y,z-30000 mm/min︱spindle rate 6000 rpm︱ 32 kW︱taper ISO ISO 50 ︱Tools changer 30 fach/tools︱internal coolant system feed 20 bar︱handwheel ︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15.100x6.200x6.250 mm︱
          -Automatic head UAD II -Tool clamping Hydraulic -Head 2 – Vertical mandril INCLUDED -2 longitudinal chip conveyors -1 cross chip conveyor -Laser tool presetter
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            Control FIDIA C20
            table-size 5000x2000 mm
            T-slots 11
            T-slot - width 22 mm
            table weight 30000 Kg
            distance between columns 2800 mm
            feed: x-20000 mm/min
            feed y,z-30000 mm/min
            spindle rate 6000 rpm
            32 kW
            taper ISO ISO 50
            Tools changer 30 fach/tools
            internal coolant system feed 20 bar
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15.100x6.200x6.250 mm
            Description :
            -Automatic head UAD II
            -Tool clamping Hydraulic
            -Head 2 – Vertical mandril INCLUDED
            -2 longitudinal chip conveyors
            -1 cross chip conveyor
            -Laser tool presetter
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA VP 2012


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-741 · Planer-Type Milling M/C - Double Column

          AWEA - VP 2012 - - 1998 - SIEMENS 810D

          Technical details
          x-travel 2.000 mm︱y-travel 1.200 mm︱z-travel 760 mm︱Control SIEMENS 810D ︱table-size 2.200 x 1.100 mm︱table weight 3.500 Kg︱distance between columns 1.300 mm︱tool adaptor BT 50 ︱rapid traverse X-axis 15.000 m/min︱rapid traverse x,y 12.000 m/min︱number of spindle speeds 5.000 U/min/rpm︱engine output 37 kW︱Tools changer ︱tool magazin: 30 ︱Internal cooling system 20 bar︱coolant tank 1000 l︱handwheel ︱Chip coveyor ︱total power requirement 40 kW︱weight of the machine ca. 16.000 kg︱
            x-travel 2.000 mm
            y-travel 1.200 mm
            z-travel 760 mm
            Control SIEMENS 810D
            table-size 2.200 x 1.100 mm
            table weight 3.500 Kg
            distance between columns 1.300 mm
            tool adaptor BT 50
            rapid traverse X-axis 15.000 m/min
            rapid traverse x,y 12.000 m/min
            number of spindle speeds 5.000 U/min/rpm
            engine output 37 kW
            tool magazin: 30
            Internal cooling system 20 bar
            coolant tank 1000 l
            total power requirement 40 kW
            weight of the machine ca. 16.000 kg
          Datasheet
          Request / Contact

          Travelling column milling machine

          used Milling machines Travelling column milling machine SORALUCE FL 5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-668 · Travelling column milling machine

          SORALUCE - FL 5000 - - 2009 -

          Technical details
          x-travel 4.500 mm︱y-travel 1.800 mm︱z-travel 1.200 mm︱Control HEIDENHAIN ITNC - 530 ︱handwheel HEIDENHAIN 520 ︱milling head -swivable +/- 2,5 X 2,5 °︱Internal cooling system 20 bar︱coolant 1.000 L︱tool change unit 40 pos.︱Chip coveyor 2 St. ︱Tool adapter ISO 50 ︱operating hours 45.981 h︱Program on 25.799 h︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 4.500 mm
            y-travel 1.800 mm
            z-travel 1.200 mm
            Control HEIDENHAIN ITNC - 530
            handwheel HEIDENHAIN 520
            milling head -swivable +/- 2,5 X 2,5 °
            Internal cooling system 20 bar
            coolant 1.000 L
            tool change unit 40 pos.
            Chip coveyor 2 St.
            Tool adapter ISO 50
            operating hours 45.981 h
            Program on 25.799 h
          Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine ZAYER 30 KCU 22.000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-10001 · Travelling column milling machine

          ZAYER - 30 KCU 22.000 - - 2000 - SIEMENS 840 D

          Technical details
          x-travel 22.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱control SIEMENS 840 D ︱milling head -swivable 0,001/0,001 Grad︱milling head Universalfräskopf 45° ︱Internal cooling system 20 bar︱Chip coveyor ja ︱Tools changer 30 pos.︱coolant 1.100 l︱Tool taper DIN 69871A ISO 50︱total power requirement 45 kW︱weight of the machine ca. 68 t︱
          *** The round table shown in the pictures as well as the plate field are not sold with ***! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Machine Colour RAL 7038 – 5012 Portable Handwheel INCLUDED
            x-travel 22.000 mm
            y-travel 1.500 mm
            z-travel 3.000 mm
            control SIEMENS 840 D
            milling head -swivable 0,001/0,001 Grad
            milling head Universalfräskopf 45°
            Internal cooling system 20 bar
            Chip coveyor ja
            Tools changer 30 pos.
            coolant 1.100 l
            Tool taper DIN 69871A ISO 50
            total power requirement 45 kW
            weight of the machine ca. 68 t
            Description :
            *** The round table shown in the pictures as well as the plate field are not
            sold with ***!

            urning Speeds 6.000 r.p.m.
            AutoIndex Head 45 º
            Head 360.000 Pos.
            Elbow 360.000 Pos.
            Main Motor Power 37 Kw.
            Nº Change Range 2 Ranges
            Automatic Tool Charger INCLUDED
            Tools at ATC 30
            Coolant Through Tool 20 Bar INCLUDED
            Soluble Oil Tank with filter paper INCLUDED
            Head Coolant System + CF Box INCLUDED
            Longitudinal Chip Conveyor INCLUDED
            Operator?s Platformd with 2000 mm Vertical movement. INCLUDED
            Ready for Rotor Translating Table
            (Regulator + Wires) /INCLUDED
            Coolant System in Electrical Cabinet INCLUDED
            Machine Weight 68.000 Kg.
            Machine Colour RAL 7038 – 5012
            Portable Handwheel INCLUDED

          Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine ZAYER 30 KMU-5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-868 · Travelling column milling machine

          ZAYER - 30 KMU-5000 - - 1999 - TNC- 430 PA

          Technical details
          x-travel 3.400 mm︱y-travel 1.250 mm︱z-travel 2.000 mm︱Control TNC- 430 PA ︱table-size 4.700 X 1.200 mm︱V- travel 500 ︱tool taper ISO 50 ︱milling head -swivable 0.001º/0.001º Grad︱main drive 37 kW︱Chip coveyor inkl ︱handwheel HR-410 ︱Tools changer 60 pos.︱milling head Automatic Head 45º ︱internal coolant system feed ︱weight of the machine ca. 35 t︱
          - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1
            x-travel 3.400 mm
            y-travel 1.250 mm
            z-travel 2.000 mm
            Control TNC- 430 PA
            table-size 4.700 X 1.200 mm
            V- travel 500
            tool taper ISO 50
            milling head -swivable 0.001º/0.001º Grad
            main drive 37 kW
            Chip coveyor inkl
            handwheel HR-410
            Tools changer 60 pos.
            milling head Automatic Head 45º
            weight of the machine ca. 35 t
            Description :
            - Automatic Head 45º INCLUDED
            - Automatic Head 45º 0.001º/0.001º
            - Head 45º Max. Speed 3.000 rpm
            - 45º Head Taper ISO-50
            - Twist Head Contiuous INCLUDED
            - Twist Head Max Speed 3.000 rpm
            - Twist Head Taper ISO-50
            - Ram with Quill
            - Quill Diameter 150 mm.
            - Quill Taper ISO-50
            - Pick up station AITEK for 45º and Twist Heads
            - Rotary Table ZEATZ Ø 1200 INCLUDED
            - RENISHAW MP 16+SP2/1

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Aleman Machines Ek

          Contacter le commerçant



            Machines Aleman Ek
           Am Mühlweg 1
            Agence-street-marketing lauchheim.73466
            Allemagne
            +49 (0)7363-6098 20">+49 (0)7363-6098 20
            +49 (0)7363-6098 19
            info@aleman-machines.com
            www.aleman-machines.com

          Profil de commerçant

           

           

           





          Find the best selection of used milling machines here
          Milling machines are practical for home or business

          Milling machines are exceptionally versatile tools used to machine a variety of materials, such as metals, woods and synthetics. Milling machines come in a range of sizes from small portable models for home hobbyists to large-scale industrial milling machines for factories. Whether you are looking for vertical or horizontal milling machines, manually operated or computer numerically controlled (CNC), you can find exactly what you need quickly and easily at LagerMaschinen.

          Which milling machine is the best for you?

          Milling machines are generally classified based on the main spindle's orientation. Horizontal milling machines are best suited to heavy materials, bulky or unconventional shaped work pieces, while vertical milling machines offer more advantages for design work and precision cutting. Although some prefer the level of control offered by manually or even mechanically operated machines, some businesses require the efficiency afforded by CNC machines. Regardless of which milling machines best suit your needs, you can find a wide array of used machines at LagerMaschinen.

          Online shopping has never been so easy

          LagerMaschinen offers users a number of distinct advantages. In this day and age, shopping online is a practical solution to strains on a busy schedule. You can browse quickly and easily online, anytime day or night, from the comfort of home or office. Also at LagerMaschinen, you can sort all your searches by price, location or specific brands to save yourself time and money in comparative shopping. From milling machines to grinders to drill presses, you can find the best selection of used machines on the web at LagerMaschinen.

          Aleman Machines E.k.   73466 - Lauchheim Am Mühlweg 1 Deutschland
          Aleman Machines E.k.

          Am Mühlweg 1



          Contact Trader


            Aleman Machines E.k.
           Am Mühlweg 1
            73466 - Lauchheim
            Deutschland
            +49 (0)7363-6098 20
            +49 (0)7363-6098 19
            info@aleman-machines.com
            www.aleman-machines.com
            Contact person:

           





          Machine category


          Bandsäge · Bearbeitungszentrum · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohr- und Fräszentrum · Bohrmaschine · CNC Drehmaschine · Drahterodiermaschine · Drehmaschine-konventionell-elektronisch · Entgratmaschine · Erodiermaschine · Fahrständerfräsmaschine · Koordinatenmeßmaschine · Langdrehautomat · Messmaschine · Portalfräsmaschine · Reinigungsanlage · Rundschleifmaschine · Räummaschine - Außen - Vertikal · Schleifmaschinen · Senkerodiermaschine · Werkzeugaufnahme ·