,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Rapid Radial Drilling Machine

          Machinelist: Rapid Radial Drilling Machine


          High-Speed Radial Drilling Machine

          used Boring mills / Machining Centers / Drilling machines High-Speed Radial Drilling Machine HKS 32 MG


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23542 · High-Speed Radial Drilling Machine

          HKS - 32 MG - - 1979 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱bore capacity in cast iron 40 mm︱workpiece height max. 550 mm︱table surface area 1530 x 750 mm︱spindle taper MT 4 ︱throat 1000 mm︱bore spindle stroke 170 mm︱spindle turning speed range 38 - 2000 U/min︱voltage 380 V︱connected load 5,0 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 2,0 x 1,6 x 2,1 m︱
          Fast radials with - feed - 3 tables - Thread cutting device - Coolant system - Tool holder with tools see pictures
            bore capacity in steel (diameter. 32 mm
            bore capacity in cast iron 40 mm
            workpiece height max. 550 mm
            table surface area 1530 x 750 mm
            spindle taper MT 4
            throat 1000 mm
            bore spindle stroke 170 mm
            spindle turning speed range 38 - 2000 U/min
            voltage 380 V
            connected load 5,0 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 2,0 x 1,6 x 2,1 m
            Description :
            Fast radials with
            - feed
            - 3 tables
            - Thread cutting device
            - Coolant system
            - Tool holder with tools
            see pictures


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Rapid Radial Drilling Machine DONAU DR 28 Z


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4657 · Rapid Radial Drilling Machine

          DONAU - DR 28 Z - - 1987 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱arm length 1030 mm︱workpiece height max. 440 mm︱total power requirement 3 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2 x 3 x 2,5 m︱
          High-Speed Radial Drilling Machine MK 3 Spindle cone MK 3Speed range 45 - 2240 min-1Extension travel / drill head adjustment- Horizontal approx. 1030 mm- Vertical approx. 440 mm- Rotation approx. 315°Table height above floor 800 mmdistance spindle center / column center approx. 305 - 1335 mmDistance spindle nose / table approx. 320 - 760 mmspace requirement approx. 2 x 3 x 2,5 mweight approx. 1,5 to Tapping devicetable with 4 T-slots 18 mm / distance 125 mm 2 T-slots lateral + rear Workspace: Tisch 1200x600 (1070x500) Drive: 1,5/2,2 Control: Drill head adjustme hor. 1030 - vert.440 mm / 315°
            bore capacity in steel (diameter. 30 mm
            arm length 1030 mm
            workpiece height max. 440 mm
            total power requirement 3 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2 x 3 x 2,5 m
            Description :
            High-Speed Radial Drilling Machine MK 3

            Spindle cone MK 3Speed range 45 - 2240 min-1Extension travel / drill head adjustment- Horizontal approx. 1030 mm- Vertical approx. 440 mm- Rotation approx. 315°Table height above floor 800 mmdistance spindle center / column center approx. 305 - 1335 mmDistance spindle nose / table approx. 320 - 760 mmspace requirement approx. 2 x 3 x 2,5 mweight approx. 1,5 to
            Tapping devicetable with 4 T-slots 18 mm / distance 125 mm 2 T-slots lateral + rear
            Workspace: Tisch 1200x600 (1070x500)
            Drive: 1,5/2,2
            Control: Drill head adjustme hor. 1030 - vert.440 mm / 315°


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Rapid Radial Drilling Machine DALMASTROJ-Jugoslawien BRB - 3


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-001801 · Rapid Radial Drilling Machine

          DALMASTROJ-Jugoslawien - BRB - 3 - - 1982 -

          Technical details
          Bohrleistung in Stahl (-Ø 30 mm︱throat 500 mm︱workpiece height max. 500 mm︱Bohrspindel-Ø/ Aufnahme 70 mm / MK 3 ︱spindle stroke 140 mm︱work table: 400 x 1050 mm︱table height over floor 700 mm︱bore head horizontal movement 500 mm︱vertical adjustment of bore slide 450 mm︱head swivability 360 °︱turning speed range 100 - 1120 U/min︱feeds 0,08 - 0,3 mm/WU︱power capacity 1,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 1,3 x 1,5 x 2,3 m︱
          license fabrication WMW - Heckert,
            Bohrleistung in Stahl (-Ø 30 mm
            throat 500 mm
            workpiece height max. 500 mm
            Bohrspindel-Ø/ Aufnahme 70 mm / MK 3
            spindle stroke 140 mm
            work table: 400 x 1050 mm
            table height over floor 700 mm
            bore head horizontal movement 500 mm
            vertical adjustment of bore slid. 450 mm
            head swivability 360 °
            turning speed range 100 - 1120 U/min
            feeds 0,08 - 0,3 mm/WU
            power capacity 1,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 1,3 x 1,5 x 2,3 m
            Description :
            license fabrication WMW - Heckert,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Rapid Radial Drilling Machine WEWAG ECONOMY GRS 30


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3605 · Rapid Radial Drilling Machine

          WEWAG ECONOMY - GRS 30 - - 1973 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 410 - 1000 mm︱workpiece height max. 765 mm︱coolant ja ︱boring spindle diameter 38 mm︱diameter of quill 70 mm︱spindle stroke 225 mm︱boring spindle MK 4 mm/min︱spindle turning speed - stepless 70 - 2000 U/min︱feed range - spindle 0,04 - 0,32 mm/U︱column diameter 225 mm︱bore radius max./min max. 1130 mm︱table surface area 630 x 1320 mm︱height adjustment 500 mm︱base plate 1500 x 1000 mm︱T-slots 4 Stück︱T-slot - distance 18 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. m︱
          shift of supports: 590 mm without turntable and tools
            bore capacity in steel (diameter. 32 mm
            arm length 410 - 1000 mm
            workpiece height max. 765 mm
            coolant ja
            boring spindle diameter 38 mm
            diameter of quill 70 mm
            spindle stroke 225 mm
            boring spindle MK 4 mm/min
            spindle turning speed - stepless 70 - 2000 U/min
            feed range - spindle 0,04 - 0,32 mm/U
            column diameter 225 mm
            bore radius max./min max. 1130 mm
            table surface area 630 x 1320 mm
            height adjustment 500 mm
            base plate 1500 x 1000 mm
            T-slots 4 Stück
            T-slot - distance 18 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,8 t
            Description :
            shift of supports: 590 mm

            without turntable and tools


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Rapid Radial Drilling Machine BERNARDO SRB 40 NC


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8110004 · Rapid Radial Drilling Machine

          BERNARDO - SRB 40 NC - - -

          Technical details
          threading 30 M︱bore capacity in steel (diameter) 40,0 mm︱workpiece height max. 380 - 785 mm︱arm length 985 mm︱spindle taper 4 MK︱boring head swiweling right/left -80 / +80 Grad︱table surface area 1210 x 520 mm︱turning speeds 50 - 2000 U/min︱column diameter 220 mm︱column diameter 220 mm︱table surface area 1.210 x 520 mm︱quill stroke 200 mm︱feed range - spindle 0,08 - 0,5 mm/U︱total power requirement 2,2 kW︱weight of the machine ca. 2.800 kg.︱dimensions of the machine ca. 2,45 x 1,2 x 2,72 m︱
          characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover
            threading 30 M
            bore capacity in steel (diameter. 40,0 mm
            workpiece height max. 380 - 785 mm
            arm length 985 mm
            spindle taper 4 MK
            boring head swiweling right/left -80 / +80 Grad
            table surface area 1210 x 520 mm
            turning speeds 50 - 2000 U/min
            column diameter 220 mm
            column diameter 220 mm
            table surface area 1.210 x 520 mm
            quill stroke 200 mm
            feed range - spindle 0,08 - 0,5 mm/U
            total power requirement 2,2 kW
            weight of the machine ca. 2.800 kg.
            dimensions of the machine ca. 2,45 x 1,2 x 2,72 m
            Description :
            characteristics
            - A variety of clamping and machining options thanks to the
            construction-related construction
            - Electromotive height adjustment of the drill head without adjusting the
            Drilling position, ideal for deep hole drilling
            - Drill head can be swiveled 180 °, boom can be moved back and forth and
            horizontally pivotable
            - Thread cutting device and 6 automatic drilling feeds in the
            Basic equipment included
            - Large table surface (1195 x 500 mm) for simultaneous clamping
            several workpieces
            - Digital speed and drilling depth display included in the scope of delivery
            - Quick set-up of the drill head on the workpiece, the clamping takes place
            hydraulically
            - Heavily ribbed column ensures great rigidity of the boom
            - Stable construction guarantees vibration-free work
            - As standard with electronically infinitely variable speed control

            scope of delivery
            - Electromagnetic spindle feed
            - Digital speed display
            - Digital drilling depth display
            - Electromotive drill head adjustment
            - First filling with Shell Tellus 46
            - Keyless chuck 1 - 13 mm / B 16
            - Drill chuck arbor MK 4 / B 16
            - Reducing sleeve MT 4/3, 4/2, 3/1
            - Thread cutting device
            - LED machine light
            - coolant device
            - Height-adjustable protective cover


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Rapid Radial Drilling Machine BATLIBOI BPR-50


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-br311 · Rapid Radial Drilling Machine

          BATLIBOI - BPR-50 - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 2000 mm︱workpiece height max. mm︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 5,8x4,5x3,4 m︱
          Brand: Batliboi Type: BPR-50 Boiler radial drilling machine Capacity: 50 mm Throat depth: 2.000 mm Spindle taper: MK5 Stroke: 350 mm Drilling Spindle: 75 mm ø Head in degrees adjustable Speed min: 16 RPM Speed max: 800 RPM Clamping surface: 2.610 x 1.050 x 260 mm Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm Machine weight: 6.570 kg
            bore capacity in steel (diameter. 50 mm
            arm length 2000 mm
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 5,8x4,5x3,4 m
            Description :
            Brand: Batliboi
            Type: BPR-50
            Boiler radial drilling machine
            Capacity: 50 mm
            Throat depth: 2.000 mm
            Spindle taper: MK5
            Stroke: 350 mm
            Drilling Spindle: 75 mm ø
            Head in degrees adjustable
            Speed min: 16 RPM
            Speed max: 800 RPM
            Clamping surface: 2.610 x 1.050 x 260 mm
            Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm
            Machine weight: 6.570 kg


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PEGARD AF9


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12617AM · Table Type Boring and Milling Machine

          PEGARD - AF9 - - unbekannt -

          Technical details
          spindle diameter 90 mm︱x-travel 1600 mm︱y-travel 1400 mm︱z-travel 900 mm︱table surface area 1200 x 900 mm︱taper ISO 40 ︱spindle speed: 25 - 1400 ︱total power requirement 16 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 90 mm
            x-travel 1600 mm
            y-travel 1400 mm
            z-travel 900 mm
            table surface area 1200 x 900 mm
            taper ISO 40
            spindle speed: 25 - 1400
            total power requirement 16 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOSHIBA BTD-110R16


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12669A · Table Type Boring and Milling Machine

          TOSHIBA - BTD-110R16 - - unbekannt - TOSNUC 7-3

          Technical details
          spindle diameter 110 mm︱x-travel 2000 mm︱y-travel 1500 mm︱z-travel 1450 mm︱table surface area 1400 x 1600 mm︱taper ISO 50 ︱spindle speed: 2 - 2500 ︱Control TOSNUC 7-3 ︱total power requirement 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 110 mm
            x-travel 2000 mm
            y-travel 1500 mm
            z-travel 1450 mm
            table surface area 1400 x 1600 mm
            taper ISO 50
            spindle speed: 2 - 2500
            Control TOSNUC 7-3
            total power requirement 22 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V00154 · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - unbekannt - Heidenhain TNC 135

          Technical details
          spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 630 mm︱table load 3 t︱Table dimensions 1000x1120 mm︱voltage 380 V︱taper ISO 50 P.D.B. ︱control Heidenhain TNC 135 ︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            w-axis 630 mm
            table load 3 t
            Table dimensions 1000x1120 mm
            voltage 380 V
            taper ISO 50 P.D.B.
            control Heidenhain TNC 135
            total power requirement 15 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS-VARNSDORF WHQ 13 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20283 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WHQ 13 CNC - - 2013 - Siemens 840Dsl

          Technical details
          spindle diameter 130 mm︱x-travel 4000 mm︱y-travel 2500 mm︱z-travel 1600 mm︱w-axis 800 mm︱b-axis 360 °︱table: 1800 x 2200 ︱table load 12 t︱feed range 4 - 5000 mm/min︱spindle turning speed range 10 - 3000 U/min︱spindle taper ISO 50 ︱spindle motor 37 kW︱rapid traverse 10 m/min︱Control Siemens 840Dsl ︱total power requirement 70 kW︱weight 39 t︱range L-W-H 8,5 x 8,6 x 5,5 mm︱
          equipped with: - CNC control Siemens 840Dsl & handwheel - 40-fold tool changer (ISO 50) - Siemens drives - coolant supply - Head TOS HUR 50 - Angle plate - measuring probe approx 9500h working hours
            spindle diameter 130 mm
            x-travel 4000 mm
            y-travel 2500 mm
            z-travel 1600 mm
            w-axis 800 mm
            b-axis 360 °
            table: 1800 x 2200
            table load 12 t
            feed range 4 - 5000 mm/min
            spindle turning speed range 10 - 3000 U/min
            spindle taper ISO 50
            spindle motor 37 kW
            rapid traverse 10 m/min
            Control Siemens 840Dsl
            total power requirement 70 kW
            weight 39 t
            range L-W-H 8,5 x 8,6 x 5,5 mm
            Description :
            equipped with:
            - CNC control Siemens 840Dsl & handwheel
            - 40-fold tool changer (ISO 50)
            - Siemens drives
            - coolant supply
            - Head TOS HUR 50
            - Angle plate
            - measuring probe
            approx 9500h working hours



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PAMA Speedmat 2 160


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03282 · Table Type Boring and Milling Machine

          PAMA - Speedmat 2 160 - - 2012 - Siemens 840 D

          Technical details
          spindle diameter 160 mm︱x-travel 3000 mm︱y-travel 2500 mm︱z-travel 3200 mm︱w-travel 800 mm︱control Siemens 840 D ︱pallet table size 1600 x 1600 mm︱table load 12 t︱spindle turning speed range - 3.500 U/min︱spindle capacity 52 kW︱tool taper HSK A 100 ︱total power requirement kW︱weight of the machine ca. ca. 88 t︱dimensions of the machine ca. 14,5 x 10,5 x 5,5 m︱
          Machine bed Z axis: Travel 3200 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Stand Y-axis: Travel 2500 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Head: -Work spindle diameter 160 mm -Tool holder A100 HSK W axis: -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min -Nominal torque of the drive 27 Nm Spindle: -Max. spindle speed 3500 rpm -Axial travel of the work spindle 800 mm -Nominal torque of the spindle drive 2396 Nm -Power spindle drive 52 kW Table X axis: -travel distance 3000 mm -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min Table B axis: -Table rotation 360° -Speed 5 rpm -Feed rate 0.005/5 mm/min Palette: -table size 1600x1600 mm -Load capacity 12000 kg Rack type tool magazine: -Maximum capacity tool magazine 306 -Distance between tool places 110 mm -Maximum tool diameter 105 mm Automatic head magazine - 2 positions Automatic universal head TS 20 360 S164: -Tool holder A 100 HSK -Spindle diameter 128.57 mm -Maximum spindle speed 2500 rpm -Indexing 360 positions/ 1° - Spindle support - Documentation
            spindle diameter 160 mm
            x-travel 3000 mm
            y-travel 2500 mm
            z-travel 3200 mm
            w-travel 800 mm
            control Siemens 840 D
            pallet table size 1600 x 1600 mm
            table load 12 t
            spindle turning speed range - 3.500 U/min
            spindle capacity 52 kW
            tool taper HSK A 100
            weight of the machine ca. ca. 88 t
            dimensions of the machine ca. 14,5 x 10,5 x 5,5 m
            Description :
            Machine bed Z axis:
            Travel 3200 mm
            Feed rapid traverse 30,000 mm/min
            Feed rate 0.5/10000 mm/min

            Stand Y-axis:
            Travel 2500 mm
            Feed rapid traverse 30,000 mm/min
            Feed rate 0.5/10000 mm/min

            Head:
            -Work spindle diameter 160 mm
            -Tool holder A100 HSK

            W axis:
            -Feed rapid traverse 30,000 mm/min
            -Feed rate 0.5/10000 mm/min
            -Nominal torque of the drive 27 Nm

            Spindle:
            -Max. spindle speed 3500 rpm
            -Axial travel of the work spindle 800 mm
            -Nominal torque of the spindle drive 2396 Nm
            -Power spindle drive 52 kW

            Table X axis:
            -travel distance 3000 mm
            -Feed rapid traverse 30,000 mm/min
            -Feed rate 0.5/10000 mm/min

            Table B axis:
            -Table rotation 360°
            -Speed 5 rpm
            -Feed rate 0.005/5 mm/min

            Palette:
            -table size 1600x1600 mm
            -Load capacity 12000 kg


            Rack type tool magazine:
            -Maximum capacity tool magazine 306
            -Distance between tool places 110 mm
            -Maximum tool diameter 105 mm


            Automatic head magazine - 2 positions

            Automatic universal head TS 20 360 S164:
            -Tool holder A 100 HSK
            -Spindle diameter 128.57 mm
            -Maximum spindle speed 2500 rpm
            -Indexing 360 positions/ 1°

            - Spindle support

            - Documentation




        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine HYUNDAI WIA KBN-135


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024019 · Table Type Boring and Milling Machine

          HYUNDAI - WIA KBN-135 - - 2011 - Fanuc 31i Model A

          Technical details
          x-travel 3.000 mm︱y-travel 2.000 mm︱z-travel 1.600 mm︱control Fanuc 31i Model A ︱main spindle: ︱w-axis 700 mm︱turning speeds 2.000 U/min︱spindle drive 22 kW︱spindle diameter 135 mm︱tool changer: ︱tool taper SK 50 ︱number of tool places 60 Pos.︱max. tool diameter 125 mm︱max. tool length 600 mm︱max. tool weight 20 kg︱change-time tool to tool 30 sec︱change-time chip to chip 70 sec︱work table: ︱table surface area 2.000 x 1.800 mm︱max. table load 10.000 kg︱
          In our opinion, the machine is in very good condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 3.000 mm
            y-travel 2.000 mm
            z-travel 1.600 mm
            control Fanuc 31i Model A
            w-axis 700 mm
            turning speeds 2.000 U/min
            spindle drive 22 kW
            spindle diameter 135 mm
            tool taper SK 50
            number of tool places 60 Pos.
            max. tool diameter 125 mm
            max. tool length 600 mm
            max. tool weight 20 kg
            change-time tool to tool 30 sec
            change-time chip to chip 70 sec
            table surface area 2.000 x 1.800 mm
            max. table load 10.000 kg
            Description :
            In our opinion, the machine is in very good condition and can be viewed under
            power
            by appointment.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***



        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine HNK MACHINE TOOL CO HB 130


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20176 · Table Type Boring and Milling Machine

          HNK MACHINE TOOL CO - HB 130 - - 2009 - Fanuc 18 LMB

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2300 mm︱z-axis 1600 mm︱W-axis (spindle longitudinal) 700 mm︱tool taper ISO 50 ︱spindle turning speed range 5 - 2500 U/min︱spindle motor 26/22 kW︱Control Fanuc 18 LMB ︱table surface area 1600 x 1800 mm︱table load capacity 15000 kg︱table rotation 0,001 °︱Rapid Travel X / Y / Z-Achse 10 m/min︱feeds x/y/z -stepless 1 - 4000 mm/min︱total power requirement kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 7,5 x 4,65 x 7,5 m︱
          equipped with - CNC control Fanuc 18 LMB - ATC 60-fold - external coolant system - rotary table 1600 x 1800mm - telescopic covers - chip conveyor
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 2300 mm
            z-axis 1600 mm
            W-axis (spindle longitudinal) 700 mm
            tool taper ISO 50
            spindle turning speed range 5 - 2500 U/min
            spindle motor 26/22 kW
            Control Fanuc 18 LMB
            table surface area 1600 x 1800 mm
            table load capacity 15000 kg
            table rotation 0,001 °
            Rapid Travel X / Y / Z-Achse 10 m/min
            feeds x/y/z -stepless 1 - 4000 mm/min
            weight of the machine ca. 44 t
            dimensions of the machine ca. 7,5 x 4,65 x 7,5 m
            Description :
            equipped with
            - CNC control Fanuc 18 LMB
            - ATC 60-fold
            - external coolant system
            - rotary table 1600 x 1800mm
            - telescopic covers
            - chip conveyor



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS-VARNSDORF WHQ 13 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20284 · Table Type Boring and Milling Machine

          TOS-VARNSDORF - WHQ 13 CNC - - 2007 - Heidenhain TNC 530

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱w-axis 800 mm︱b-axis 360 °︱table: 1800 x 2000 ︱table load 12 t︱feed range 4 - 5000 mm/min︱spindle turning speed range 10 - 3000 U/min︱spindle taper ISO 50 ︱spindle motor 37 kW︱rapid traverse 10 m/min︱Control Heidenhain TNC 530 ︱total power requirement 70 kW︱weight 39 t︱range L-W-H 8,5 x 8,6 x 5,5 mm︱
          equipped with: - CNC control Heidenhain TNC 530 & handwheel - 40-fold tool changer (ISO 50) - cooling through the center of the spindle - Chip conveyor - A set of angles approx 3000h Spindle running hours
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            w-axis 800 mm
            b-axis 360 °
            table: 1800 x 2000
            table load 12 t
            feed range 4 - 5000 mm/min
            spindle turning speed range 10 - 3000 U/min
            spindle taper ISO 50
            spindle motor 37 kW
            rapid traverse 10 m/min
            Control Heidenhain TNC 530
            total power requirement 70 kW
            weight 39 t
            range L-W-H 8,5 x 8,6 x 5,5 mm
            Description :
            equipped with:
            - CNC control Heidenhain TNC 530 & handwheel
            - 40-fold tool changer (ISO 50)
            - cooling through the center of the spindle
            - Chip conveyor
            - A set of angles

            approx 3000h Spindle running hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine WM WORKS WMG BMT 105 PTP


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03752 · Table Type Boring and Milling Machine

          WM WORKS - WMG BMT 105 PTP - - 2001 -

          Technical details
          spindle diameter 105 mm︱x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1400 mm︱Table area 1750x2000 mm︱turning speeds 16-1400 U/min︱table load max. 4 t︱weight of the machine ca. 18 t︱
          The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            spindle diameter 105 mm
            x-travel 2100 mm
            y-travel 1500 mm
            z-travel 1400 mm
            Table area 1750x2000 mm
            turning speeds 16-1400 U/min
            table load max. 4 t
            weight of the machine ca. 18 t
            Description :
            The techn. Data are manufacturer or operator information
            and therefore non-binding. We reserve the right to prior sale; Our terms and
            conditions of sale apply exclusively.About usMore than 400 of our own machines
            in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore
            than 1000 items Accessories for your workshopYou want to sell machines,
            production lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHQ


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100121 · Table Type Boring and Milling Machine

          TOS - WHQ - - 2000 - TNC 430 Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱work spindle diameter ISO50 mm︱spindle turning speed range 10-2500 U/min︱Control TNC 430 Heidenhain ︱total power requirement kW︱weight of the machine ca. ca. 38 t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            work spindle diameter ISO50 mm
            spindle turning speed range 10-2500 U/min
            Control TNC 430 Heidenhain
            weight of the machine ca. ca. 38 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS W75


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10018 · Table Type Boring and Milling Machine

          TOS - W75 - - 1998 -

          Technical details
          spindle diameter 75 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 560 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 75 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            w-axis 560 mm


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-16220 · Table Type Boring and Milling Machine

          Castel - GREEN 1T4 - - 1997 - HEIDENHAIN TNC 430

          Technical details
          spindle diameter 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            spindle diameter 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine Femco WBT-100SR2


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KOT180 · Table Type Boring and Milling Machine

          Femco - WBT-100SR2 - - 1995 -

          Technical details
          CNC brand Mitsubishi ︱CNC model Meldas C3 ︱Table length 1.440 mm︱Table width 1.600 mm︱Spindle diameter 100 mm ø︱X 550 mm︱Y 1800 mm︱Z/W 1.700/550 mm︱Spindle taper ISO 50 ︱Machine dimensions (lxbxh) 5.680 x 3.400 x 3.700 mm︱
            CNC brand Mitsubishi
            CNC model Meldas C3
            Table length 1.440 mm
            Table width 1.600 mm
            Spindle diameter 100 mm ø
            X 550 mm
            Y 1800 mm
            Z/W 1.700/550 mm
            Spindle taper ISO 50
            Machine dimensions (lxbxh) 5.680 x 3.400 x 3.700 mm
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine FEMCO1200 WBT-100SR2


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-kot180 · Table Type Boring and Milling Machine

          FEMCO1200 - WBT-100SR2 - - 1995 -

          Technical details
          spindle diameter 100 mm︱x-travel 1200 mm︱y-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 5,6x3,4x3,x7 m︱
          Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron
            spindle diameter 100 mm
            x-travel 1200 mm
            y-travel 800 mm
            dimensions of the machine ca. 5,6x3,4x3,x7 m
            Description :
            Brand: Femco
            Type: WBT-100SR2
            CNC brand: Mitsubishi
            CNC model: Meldas C3
            Year of make: 1995-05
            Facing support
            Table length: 1.440 mm
            Table width: 1.600 mm
            Spindle diameter: 100 mm ø
            Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm
            incl. right-angle milling head type Huron


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03004 · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - 1993 - Heidenhain

          Technical details
          spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 1100 mm︱z-travel 950 mm︱Table load 3000 kg︱table surface area 1000x1120 mm︱turning speeds 16-1250 U/min︱spindle taper ISO 50 ︱Control Heidenhain ︱total power requirement kW︱weight of the machine ca. 13,4 t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1250 mm
            y-travel 1100 mm
            z-travel 950 mm
            Table load 3000 kg
            table surface area 1000x1120 mm
            turning speeds 16-1250 U/min
            spindle taper ISO 50
            Control Heidenhain
            weight of the machine ca. 13,4 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11152A · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - 1993 - Heidenhain TNC 135

          Technical details
          spindle diameter 75 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱Table load 3000 kg︱table surface area 1000x1120 mm︱turning speeds 16-1250 U/min︱spindle taper ISO 50 P.D.B. ︱Control Heidenhain TNC 135 ︱total power requirement 15 kW︱weight of the machine ca. 13,4 t︱dimensions of the machine ca. m︱
            spindle diameter 75 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            Table load 3000 kg
            table surface area 1000x1120 mm
            turning speeds 16-1250 U/min
            spindle taper ISO 50 P.D.B.
            Control Heidenhain TNC 135
            total power requirement 15 kW
            weight of the machine ca. 13,4 t


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine WOTAN Rapid 3


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12540AH · Table Type Boring and Milling Machine

          WOTAN - Rapid 3 - - 1993 - Sienumeric 820 M

          Technical details
          spindle diameter 130 mm︱x-travel 2500 mm︱y-travel 1960 mm︱z-travel 2200 mm︱w-axis 600 mm︱spindle travel 1000 mm︱table surface area 2000x1600 mm︱table load 12 t︱Control Sienumeric 820 M ︱chip conveyor 2 St︱angular milling head 2 St︱spindle taper ISO 50 ︱turning speeds 12,5-2000 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 2500 mm
            y-travel 1960 mm
            z-travel 2200 mm
            w-axis 600 mm
            spindle travel 1000 mm
            table surface area 2000x1600 mm
            table load 12 t
            Control Sienumeric 820 M
            chip conveyor 2 St
            angular milling head 2 St
            spindle taper ISO 50
            turning speeds 12,5-2000 U/min


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION BFT 90/5


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02773 · Table Type Boring and Milling Machine

          UNION - BFT 90/5 - - 1993 - Heidenhain

          Technical details
          spindle diameter 102 mm︱x-travel 1600 mm︱y-travel 1000 mm︱z-travel 1600 mm︱Control Heidenhain ︱type TNC 410 ︱table surface area 1000x1120 mm︱Table load 3000 kg︱spindle stroke 710 mm︱spindle turning speed range 4-1600 U/min︱main drive motor 13 kW︱total power requirement kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱
            spindle diameter 102 mm
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 1600 mm
            Control Heidenhain
            type TNC 410
            table surface area 1000x1120 mm
            Table load 3000 kg
            spindle stroke 710 mm
            spindle turning speed range 4-1600 U/min
            main drive motor 13 kW
            weight of the machine ca. 12 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •