,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Jig Boring Machine - Vertical

          Machinelist: Jig Boring Machine - Vertical


          Jig Boring Machine - Vertical

          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical SIP MP 5G


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7806 · Jig Boring Machine - Vertical

          SIP - MP 5G - - unbekannt -

          Technical details
          table-size 1100 x 810 mm︱spindle turning speed range 50 – 2000 U/min︱spindle taper MK 4 ︱x-axis 1000 mm︱y-axis 715 mm︱z-axis 600 mm︱total power requirement 2,2 kW︱weight of the machine ca. 4,10 t︱
          Heidenhain 2-axis digital display, Round table Ø 600 mm, Round swivel table Ø 450 mm, automatic feeds in all directions, 3 milling angles, extremely many accessories
            table-size 1100 x 810 mm
            spindle turning speed range 50 – 2000 U/min
            spindle taper MK 4
            x-axis 1000 mm
            y-axis 715 mm
            z-axis 600 mm
            total power requirement 2,2 kW
            weight of the machine ca. 4,10 t
            Description :
            Heidenhain 2-axis digital display,
            Round table Ø 600 mm,
            Round swivel table Ø 450 mm,
            automatic feeds in all directions,
            3 milling angles,
            extremely many accessories


        • MWB GmbH & CO. KG
        • Parkstraße 12
        • 09456 Annaberg-Buchholz
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical SIP MP - 53


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-320736 · Jig Boring Machine - Vertical

          SIP - MP - 53 - - 1985 -

          Technical details
          spindle diameter 110 mm︱x-travel 900 mm︱y-travel 600 mm︱z-axis 200 mm︱table length 1020 mm︱table width 860 mm︱taper MK 40
          Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.
            spindle diameter 110 mm
            x-travel 900 mm
            y-travel 600 mm
            z-axis 200 mm
            table length 1020 mm
            table width 860 mm
            taper MK 40
            Description :
            Table size, approx. 1,020 x 860 mm
            Max. weight of workpiece 800 kg

            Table travel, longitudinal, max. (X) 900 mm
            Boring head travel, cross, max. (Y) 600 mm
            Boring spindle stroke (Z) 200 mm
            Vertical travel of cross beam (W) 635 mm

            Vertical distance between table and boring spindle 15 - 850 mm
            Distance between columns 950 mm
            Spindle Ø 110 mm
            Spindle taper internal/external ISO 40
            18 spindle speeds 10 - 2,500 rpm

            Milling feeds of table, infinitely variable 1 - 6,000 mm/min
            4 milling feeds of boring head 30 - 180 mm/min
            6 boring feeds 0.01 - 0.39 rpm
            Accuracy of all 3 axes when the machine was new 0.003 mm
            Quick feeds for table, boring head slide, and
            boring spindle, max. 6,000 mm/min

            Spindle drive 6.2 kW
            Weight, approx. 9,000 kg
            Total electrical load 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry.
            - Digital display for Z Axis.
            - Separate switch cabinet.
            - Various tools.
            - Oil cooler for spindle lubrication.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical ABA VLD


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01953 · Jig Boring Machine - Vertical

          ABA - VLD - - 1977 - TNC 360

          Technical details
          x-travel 520 mm︱y-travel 400 mm︱z-travel 450 mm︱spindle taper ISO 40 ︱control TNC 360 ︱coolant tank l︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 2450x2300x3300 m︱
            x-travel 520 mm
            y-travel 400 mm
            z-travel 450 mm
            spindle taper ISO 40
            control TNC 360
            dimensions of the machine ca. 2450x2300x3300 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical SIP Hydroptik 6A


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8248K · Jig Boring Machine - Vertical

          SIP - Hydroptik 6A - - 1970 -

          Technical details
          spindle diameter 135 mm︱x-travel 1000 mm︱y-travel 795 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Refurbished Digital display Drilling spindle axis Z: 300 mm Spindle cone: MK 4 Table surface: 1100 mm x 842 mm Max. table load: 1000 kilogram Free passage between the uprights: 1100 mm
            spindle diameter 135 mm
            x-travel 1000 mm
            y-travel 795 mm
            Description :
            Refurbished

            Digital display

            Drilling spindle axis Z: 300 mm
            Spindle cone: MK 4
            Table surface: 1100 mm x 842 mm
            Max. table load: 1000 kilogram
            Free passage
            between the uprights: 1100 mm


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical SIP MP-2P


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-1974 · Jig Boring Machine - Vertical

          SIP - MP-2P - - 1966 -

          Technical details
          spindle diameter 70 mm︱x-travel 450 mm︱y-travel 300 mm︱z-travel 350 mm︱surface area 700 x 300 mm︱hydr. movements of the speed movement 2500 m/min.︱outer clamping tapper SIP 2e ︱turning speeds 3000 U/min︱weight 2,5 t︱
          With 2 axes - Digital Tools
            spindle diameter 70 mm
            x-travel 450 mm
            y-travel 300 mm
            z-travel 350 mm
            surface area 700 x 300 mm
            hydr. movements of the speed mov. 2500 m/min.
            outer clamping tapper SIP 2e
            turning speeds 3000 U/min
            weight 2,5 t
            Description :
            With 2 axes - Digital
            Tools


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical ABAWERK VLP 600


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-01212 · Jig Boring Machine - Vertical

          ABAWERK - VLP 600 - - 1961 -

          Technical details
          spindle diameter 70 mm︱x-travel 650 mm︱y-travel 400 mm︱z-travel 400 mm︱surface area 750 x 500 mm︱hydr. movements of the speed movement 2500 m/min.︱turning speeds 3000 U/min︱feed stroke of the boring spindle 120 mm︱
          With 2 axes - Digital
            spindle diameter 70 mm
            x-travel 650 mm
            y-travel 400 mm
            z-travel 400 mm
            surface area 750 x 500 mm
            hydr. movements of the speed mov. 2500 m/min.
            turning speeds 3000 U/min
            feed stroke of the boring spindl. 120 mm
            Description :
            With 2 axes - Digital


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Jig Boring Machine - Vertical HAUSER Type 5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-263201 · Jig Boring Machine - Vertical

          HAUSER - Type 5 - - 1961 -

          Technical details
          spindle diameter 0 mm︱x-travel 700 mm︱y-travel 600 mm︱table length 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Double Column Design Jig Borer Tablesize: 800 x 600mm
            x-travel 700 mm
            y-travel 600 mm
            table length 800 mm
            Description :
            Double Column Design Jig Borer
            Tablesize: 800 x 600mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine CORDIA SL 30 VG


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-02157 · Pillar Drilling Machine

          CORDIA - SL 30 VG - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 300 mm︱bore stroke 120 mm︱table surface area 420 x 370 mm︱spindle taper MK 3 ︱spindle turning speed range 45 - 1450 U/min︱threading bis / up to M 20 ︱total power requirement 2,2 kW︱weight of the machine ca. 400 kg︱dimensions of machine L x W x H 0,75 x 0,60 x 2,07 m︱
          - with thread cutting attachment
            bore capacity in steel (diameter. 30 mm
            throat 300 mm
            bore stroke 120 mm
            table surface area 420 x 370 mm
            spindle taper MK 3
            spindle turning speed range 45 - 1450 U/min
            threading bis / up to M 20
            total power requirement 2,2 kW
            weight of the machine ca. 400 kg
            dimensions of machine L x W x H 0,75 x 0,60 x 2,07 m
            Description :
            - with thread cutting attachment


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine SOLID BV35


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3174 · Pillar Drilling Machine

          SOLID - BV35 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 340 mm︱bore stroke 180 mm︱tool taper MK 4 ︱turning speed range - stepless 45 - 1400 U/min︱feed stepless 0,04 - 0,35 mm/U︱motor speeds: 3 ︱table-size 500 x 500 mm︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 1000 x 500 x 1950 mm︱
          inkl. working light function not tested
            bore capacity in steel (diameter. 35 mm
            throat 340 mm
            bore stroke 180 mm
            tool taper MK 4
            turning speed range - stepless 45 - 1400 U/min
            feed stepless 0,04 - 0,35 mm/U
            motor speeds: 3
            table-size 500 x 500 mm
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 1000 x 500 x 1950 mm
            Description :
            inkl. working light

            function not tested


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine FLOTT SB 14


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100001 · Pillar Drilling Machine

          FLOTT - SB 14 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 14 mm︱throat 200 mm︱bore stroke 60 mm︱morse taper 1 MK︱table: 280 x 260 mm︱turning speeds 430 - 4500 U/min︱column diameter 70 mm︱weight 100 kg︱
            bore capacity in steel (diameter. 14 mm
            throat 200 mm
            bore stroke 60 mm
            morse taper 1 MK
            table: 280 x 260 mm
            turning speeds 430 - 4500 U/min
            column diameter 70 mm
            weight 100 kg
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine FLOTT SB 15


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5140 · Pillar Drilling Machine

          FLOTT - SB 15 - - unbekannt -

          Technical details
          spindle cone MK 1 ︱turning speeds 200 - 3000 U/min︱table-size 300 x 220 mm︱total power requirement 520 W︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 800*400*1800 mm︱
            spindle cone MK 1
            turning speeds 200 - 3000 U/min
            table-size 300 x 220 mm
            total power requirement 520 W
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 800*400*1800 mm


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine OPTIMUM Opti drill B28 H vario


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3521 · Pillar Drilling Machine

          OPTIMUM - Opti drill B28 H vario - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 200 mm︱bore stroke 105 mm︱spindle taper MK 3 ︱number of spindle speeds 12 ︱spindle speed: 35 - 5600 Upm︱column diameter 92 mm︱table-size 340 x 360 mm︱table rotating 360 °︱total power requirement 1,5 kW︱weight of the machine ca. ca. 170 kg︱dimensions of the machine ca. ca. 750 x 500 x 1800 mm︱
            bore capacity in steel (diameter. 28 mm
            throat 200 mm
            bore stroke 105 mm
            spindle taper MK 3
            number of spindle speeds 12
            spindle speed: 35 - 5600 Upm
            column diameter 92 mm
            table-size 340 x 360 mm
            table rotating 360 °
            total power requirement 1,5 kW
            weight of the machine ca. ca. 170 kg
            dimensions of the machine ca. ca. 750 x 500 x 1800 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IXION BS 23 FST


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3469 · Pillar Drilling Machine

          IXION - BS 23 FST - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 / 28 mm︱throat 260 mm︱bore stroke 120 mm︱tool taper MK 3 ︱table-size 500 x 350 mm︱column diameter 100 mm︱total power requirement 1,3 kW︱weight of the machine ca. 400 kg︱dimensions of the machine ca. 800 x 600 x 1750 mm︱
          Machine info - right-left rotation - stepless speed adjustment - automatic feed 0,1/ 0,16 / 0,25
            bore capacity in steel (diameter. 23 / 28 mm
            throat 260 mm
            bore stroke 120 mm
            tool taper MK 3
            table-size 500 x 350 mm
            column diameter 100 mm
            total power requirement 1,3 kW
            weight of the machine ca. 400 kg
            dimensions of the machine ca. 800 x 600 x 1750 mm
            Description :
            Machine info
            - right-left rotation
            - stepless speed adjustment
            - automatic feed 0,1/ 0,16 / 0,25


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine FLOTT SB 23


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3522 · Pillar Drilling Machine

          FLOTT - SB 23 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 mm︱throat 300 mm︱bore stroke 150 mm︱table-size 300 x 410 mm︱spindle taper MK 2 ︱total power requirement 1,4 kW︱weight of the machine ca. ca. 315 kg︱dimensions of the machine ca. ca. 700 x 900 x 1900 mm︱
          Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.
            bore capacity in steel (diameter. 23 mm
            throat 300 mm
            bore stroke 150 mm
            table-size 300 x 410 mm
            spindle taper MK 2
            total power requirement 1,4 kW
            weight of the machine ca. ca. 315 kg
            dimensions of the machine ca. ca. 700 x 900 x 1900 mm
            Description :
            Machine has fallen over. A sheet metal cover and 2 levers of the cross lever
            broke off. Concentricity has been tested and is OK. Functional video available.
            Machine can be viewed and tested on site.


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAPEMA ZS 40H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08411 · Pillar Drilling Machine

          KAPEMA - ZS 40H - - neu -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 297 mm︱bore stroke 120 mm︱speeds 8 / 75 - 1600 U/min︱table-size 500 x 460 mm︱spindle taper MK 4 ︱column diameter 115 mm︱spindle feeds: 3 / 0,1 - 0,26 mm/U︱distance spindle /table 715 mm︱distance spindle/base plate 1180 mm︱engine output 1,5 kW︱table rotating 360 Grad︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 0,5 x 0,76 x 1,89 m︱Electric 380 Volt ︱Cooling pump in machine base ︱Machinelight
          Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. Machine not much used from the demonstration area. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 40 mm
            throat 297 mm
            bore stroke 120 mm
            speeds 8 / 75 - 1600 U/min
            table-size 500 x 460 mm
            spindle taper MK 4
            column diameter 115 mm
            spindle feeds: 3 / 0,1 - 0,26 mm/U
            distance spindle /table 715 mm
            distance spindle/base plate 1180 mm
            engine output 1,5 kW
            table rotating 360 Grad
            weight of the machine ca. 335 kg
            dimensions of the machine ca. 0,5 x 0,76 x 1,89 m
            Description :
            Heavy geared boring machine with digital display for speed and drilling depth,
            hardened gears, thick-walled column, large table and base plate with
            T-slots, motorized table adjustment, electromagnetic feed engagement
            by means of snaps on the control lever. Machine not much used from the
            demonstration area.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76270 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514 x 360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117 / 701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160 - 2250 UpM︱total power requirement 1,45 / 1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514 x 360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117 / 701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160 - 2250 UpM
            total power requirement 1,45 / 1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL ALZSTAR 30 iTRONIC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7189 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 30 iTRONIC - - NEU -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 293 mm︱bore stroke 140 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 225 - 4300 U/min︱total power requirement 1,0 / 1,6 kW︱weight of the machine ca. 260 kg︱dimensions of the machine ca. H: 1790 mm︱
            bore capacity in steel (diameter. 30 mm
            throat 293 mm
            bore stroke 140 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 225 - 4300 U/min
            total power requirement 1,0 / 1,6 kW
            weight of the machine ca. 260 kg
            dimensions of the machine ca. H: 1790 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL AZ 34 PSR + Fuessschalter


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100025 · Pillar Drilling Machine

          IBERDRILL - AZ 34 PSR + Fuessschalter - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
          Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
            Description :
            Column drilling machines - V-belt drive with foot switch

            - Drilling machine of circular column feed automaticmechanical
            - Drive by electronic wide V-belt
            - Spindle taper: CM 4
            - Stepless speed adjustment with frequency converter
            - Potentiometer for speed adjustment
            - digital speed display
            - Automatic feed reversal when threading
            - Scale with adjustable drilling depth - automatic tool ejector
            - Push button for EMERGENCY STOP switch for right/left rotation
            - Electronic control integrated in the drill head - integrated coolant device
            - Machine light - height-adjustable chip protection disc with micro switch
            - fixed table
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010618 · Pillar Drilling Machine

          ALZMETALL - AX 3/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30 ︱spindle turning speed - stepless 160-2250 U/min︱ MK 3 ︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 515x360 mm︱distance spindle /table min./max. 117/701 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,2 mm/U︱Machine height 1840 mm︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) Pos. 24 Coolant device A, consisting of: Coolant base plate with machined Workpiece support surface 320x320 mm and 2 T-slots, pump with Motor protection switch, complete fitting
            40 mm
            M 24
            M 30
            spindle turning speed - stepless 160-2250 U/min
            MK 3
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            515x360 mm
            distance spindle /table min./max. 117/701 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,2 mm/U
            Machine height 1840 mm
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)

            Pos. 24
            Coolant device A, consisting of: Coolant base plate with machined
            Workpiece support surface 320x320 mm and 2 T-slots, pump with
            Motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010594 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 605 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 605 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010330 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 4 iTRONIC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100017 · Pillar Drilling Machine

          ALZMETALL - AX 4 iTRONIC - - NEU -

          Technical details
          bore capacity in steel (diameter) 55,0 mm︱throat 300 mm︱bore stroke 140 mm︱morse taper 4 MK︱table: 615 x 430 mm︱turning speeds 70 - 1.200 U/min︱engine output 1,8 / 2,9 kW︱column diameter 145 mm︱thread M30 ST60︱thread M36 GG20︱feed 0,10 + 0,30 mm/U︱weight 380 kg︱Machine height 1850 mm︱
          ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base
            bore capacity in steel (diameter. 55,0 mm
            throat 300 mm
            bore stroke 140 mm
            morse taper 4 MK
            table: 615 x 430 mm
            turning speeds 70 - 1.200 U/min
            engine output 1,8 / 2,9 kW
            column diameter 145 mm
            thread M30 ST60
            thread M36 GG20
            feed 0,10 + 0,30 mm/U
            weight 380 kg
            Machine height 1850 mm
            Description :
            ** NEW ALZMETALL MODEL RANGE **

            7 "TFT - LCD display with touch function:
            * Spindle speed setpoint
            * Actual speed display
            * Integrated drilling depth display
            * with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status displays and warnings in the display
            * Service information
            * Selectable user language: DE / EN / FR / ES / IT / NL / RU.

            Furnishing:
            - Thread cutting device
            * for thread cutting with a stop
            * max. 6 threads / min (thread cutting performance depends on the spindle speed)
            * Thread depth adjustable via depth stop
            * in the TFT - LCD display (3 tools).
            - automatic spindle feed with feed overload protection
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - counterclockwise rotation -
            stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black
            - Machine oil first filling: oil bottle, loose delivery

            including special accessories:
            - 12. LED machine light
            - 24. Coolant system A * in the machine base


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010502 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40 iTRONIC-V - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, speed display actual value, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HM MACHINERY SBM 32 F AUT


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100020 · Pillar Drilling Machine

          HM MACHINERY - SBM 32 F AUT - - NEU -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 160 mm︱morse taper 4 MK︱table: 460 x 460 mm︱turning speeds 75 - 3200 U/min︱engine output 1,5 kW︱column diameter 125 mm︱thread M16 ST60︱feed 0,10/0,18/0,26 mm/U︱dimensions 800 x 500 x 2200 mm︱weight 350 kg︱
          - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 160 mm
            morse taper 4 MK
            table: 460 x 460 mm
            turning speeds 75 - 3200 U/min
            engine output 1,5 kW
            column diameter 125 mm
            thread M16 ST60
            feed 0,10/0,18/0,26 mm/U
            dimensions 800 x 500 x 2200 mm
            weight 350 kg
            Description :
            - automatic drill feeds (magnetic clutch)
            - Height adjustable and angle adjustable table
            - Movable work table
            - Integrated cooling system
            - Powerful engine
            - 3 hand levers for drilling feed
            - Safety shield with limit switch
            - Separate emergency stop
            - Built-in working lights
            - Incl. drill chuck 16mm - B16
            - Built-in automatic thread cutting.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          SIP - ABAWERK - ABA - HAUSER -