Jig Boring Machine - Vertical

table-size 1100 x 810 mm︱spindle turning speed range 50 – 2000 U/min︱spindle taper MK 4 ︱x-axis 1000 mm︱y-axis 715 mm︱z-axis 600 mm︱total power requirement 2,2 kW︱weight of the machine ca. 4,10 t︱

---

Heidenhain 2-axis digital display, Round table Ø 600 mm, Round swivel table Ø 450 mm, automatic feeds in all directions, 3 milling angles, extremely many accessories

spindle diameter 110 mm︱x-travel 900 mm︱y-travel 600 mm︱z-axis 200 mm︱table length 1020 mm︱table width 860 mm︱taper MK 40 ︱

---

Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

x-travel 520 mm︱y-travel 400 mm︱z-travel 450 mm︱spindle taper ISO 40 ︱control TNC 360 ︱coolant tank l︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 2450x2300x3300 m︱

---

spindle diameter 135 mm︱x-travel 1000 mm︱y-travel 795 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Refurbished Digital display Drilling spindle axis Z: 300 mm Spindle cone: MK 4 Table surface: 1100 mm x 842 mm Max. table load: 1000 kilogram Free passage between the uprights: 1100 mm

spindle diameter 70 mm︱x-travel 450 mm︱y-travel 300 mm︱z-travel 350 mm︱surface area 700 x 300 mm︱hydr. movements of the speed movement 2500 m/min.︱outer clamping tapper SIP 2e ︱turning speeds 3000 U/min︱weight 2,5 t︱

---

With 2 axes - Digital Tools

spindle diameter 70 mm︱x-travel 650 mm︱y-travel 400 mm︱z-travel 400 mm︱surface area 750 x 500 mm︱hydr. movements of the speed movement 2500 m/min.︱turning speeds 3000 U/min︱feed stroke of the boring spindle 120 mm︱

---

With 2 axes - Digital

spindle diameter 0 mm︱x-travel 700 mm︱y-travel 600 mm︱table length 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Double Column Design Jig Borer Tablesize: 800 x 600mm

spindle diameter 110 mm︱x-travel 2000 mm︱y-travel 1500 mm︱z-travel 1450 mm︱table surface area 1400 x 1600 mm︱taper ISO 50 ︱spindle speed: 2 - 2500 ︱Control TOSNUC 7-3 ︱total power requirement 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 630 mm︱table load 3 t︱Table dimensions 1000x1120 mm︱voltage 380 V︱taper ISO 50 P.D.B. ︱control Heidenhain TNC 135 ︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle diameter 110 mm︱x-travel 1800 mm︱y-travel 1400 mm︱z-travel 1400 mm︱W-axis (spindle longitudinal) 600 mm︱max. table load 5 kg︱table-size 1250x1400 mm︱spindle drive 22 kW︱spindle taper 50 ISO︱spindle speed 10~3000 1/min︱Spindle motor torque 1000 Nm︱rapid speed (X/Y/Z/W):5/5/5/3 m/min︱feeds (X/Y/Z/W): 3/3/3/2 m/min︱positioning accuracy 0.025/1,000 mm (X/Y/Z), 0 ︱repeating accuracy 0.015 mm (X/Y/Z), 0.025 m mm︱total power requirement 50 kva︱weight of the machine ca. 18,5 t︱ ︱CE-design ︱spindle bearing SKF ︱

---

spindle diameter 110 mm︱x-travel 1600 mm︱y-travel 1000 mm︱z-travel 1250 mm︱w-axis Ausfahren der Spindel: 40 mm︱B-axis (table) 360 x 1° mm︱Distance table/spindle center 0-1000 mm︱table load 2,5 t︱table-size 1000x800 mm︱T-slot (width-distance-quantity) 22H8 x 7 x 100 mm︱tool taper 50 ISO︱spindle turning speed - stepless 2 Stufen: 20-1000 1/min︱feeds X/Y/Z-Achse: 3-950 mm/min︱feeds W-Achse: 3-400 mm/min︱rapid speed X/Y/Z-Achse: 2,8 m/min︱rapid speed W-Achse: 2 m/min︱main drive 15 kw (drehzahlgeregelt) ︱feed motors X/Y/Z-Achse-Servomotoren: kW︱Feed motor W-Achse-Servomotor: 1,3 kW︱range L-W-H 3.874 x 4.317x3.715 mm︱

---

HBM-130 | HBM-130L | HBM- ︱spindle diameter 130|130|130 mm︱x-travel 1600|2000|2000 mm︱y-travel 1400|1800|1800 mm︱z-travel 2000 mm︱U-axis 250 mm︱W-axis (spindle longitudinal) 900 mm︱max. torque on the spindle 3200 Nm︱B-axis (table) 360x1 °︱rapid speed X/Y/Z/W: 2500 mm/min︱table load 8|10|10 t︱table-size 1600 x 1400|1800 x 1600|2 mm︱T-slots 9/11/12 Stk.︱T-slot - width 28 mm︱transmission ratio 4 Stk.︱spindle speed 4-800 1/min︱spindle taper 50 ISO︱faceplate Drehmoment: 4900 Nm︱faceplate 2.5-125 1/min︱faceplate Umdrehung stufenlos einst ︱

---

Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position by the collimator ? X,Y, Z, B axes DRO are available ? Spindle could choose ISO50, with automatic clamping 1. Introduce The horizontal boring and milling machine series HBM-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. Also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. The machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. The vertical movement of headstock goes along the column's guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated. The characteristics of HBM-130 2.1 The big servo spindle 22KW motor supply continuously speed change and high torque output of headstock. Four speed range can be changed by the selector on the control panel. The infinit speed change in each range can be effected continuously and smoothly. It’s very simple and convenient for machine operation. Compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%. 2.2 The vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy. 2.3 Main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine. 2.4 The horizontal guideway surface of the machine is provided with all pull-board type dust-proof. 2.5 Electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide). 2.6 In the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload. 3. Transmission systems of the machine 3.1 Headstock transmission The rotation movement of boring spindle are driven by CTB servo spindle motor directly. Insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. Low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 Feed motion The feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).The power of various moving units comes from shaft driven by main driven motor. It can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). After that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively. The feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 Rapid transmission system The rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by AC motor mounted at the right side of the bed. Power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min. 4. Hydraulic system of the machine The hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock

HBM-110 | HBM-110L | HBM- ︱spindle diameter 110 mm︱x-travel 900|1250|1600 mm︱y-travel 900|900|1200 mm︱z-travel 1400|1400|1400 mm︱W-axis (spindle longitudinal) 600 mm︱B-axis (table) 360x1 °︱table load 5 t︱table-size 1100 x 960|1250 x 1100|12 mm︱T-slots 22 mm︱spindle speed 22 Stufen, 8-1000 1/min︱spindle taper 50 ISO︱rapid speed (X / Y / Z / W) 2500 mm/min︱speed - faceplate 4-200 1/min︱torqe of face plate 1960 Nm︱dia of faceplate 630 mm︱movement of facing slide 180 mm︱weight of the machine ca. 11,5|18|20 t︱main drive 7,5 kW︱Machine size (LxWxH) 5120x3380x3100 mm︱

---

HBM-110L ︱spindle diameter 110 mm︱x-travel 900 mm︱y-travel 900 mm︱z-travel 1400 mm︱W-axis (spindle longitudinal) 600 mm︱U-axis Planschieber: 180 mm︱B-axis (table) 360x1 °︱table load 5 t︱table-size 1100x960 mm︱T-slots 22 Stk.︱spindle speed 22 Stufen, 8-1000 1/min︱spindle taper 50 ISO︱rapid speed (X / Y / Z / W) 2500 mm/min︱speed - faceplate 4-200 (18 Stufen) 1/min︱torqe of face plate 1960 Nm︱dia of faceplate 600 mm︱movement of facing slide 180 mm︱weight of the machine ca. 11500 kg︱main drive 7,5 kW︱

---

spindle diameter 160 mm︱x-travel 3000 mm︱y-travel 2500 mm︱z-travel 3200 mm︱w-travel 800 mm︱control Siemens 840 D ︱pallet table size 1600 x 1600 mm︱table load 12 t︱spindle turning speed range - 3.500 U/min︱spindle capacity 52 kW︱tool taper HSK A 100 ︱total power requirement kW︱weight of the machine ca. ca. 88 t︱dimensions of the machine ca. 14,5 x 10,5 x 5,5 m︱

---

Machine bed Z axis: Travel 3200 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Stand Y-axis: Travel 2500 mm Feed rapid traverse 30,000 mm/min Feed rate 0.5/10000 mm/min Head: -Work spindle diameter 160 mm -Tool holder A100 HSK W axis: -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min -Nominal torque of the drive 27 Nm Spindle: -Max. spindle speed 3500 rpm -Axial travel of the work spindle 800 mm -Nominal torque of the spindle drive 2396 Nm -Power spindle drive 52 kW Table X axis: -travel distance 3000 mm -Feed rapid traverse 30,000 mm/min -Feed rate 0.5/10000 mm/min Table B axis: -Table rotation 360° -Speed 5 rpm -Feed rate 0.005/5 mm/min Palette: -table size 1600x1600 mm -Load capacity 12000 kg Rack type tool magazine: -Maximum capacity tool magazine 306 -Distance between tool places 110 mm -Maximum tool diameter 105 mm Automatic head magazine - 2 positions Automatic universal head TS 20 360 S164: -Tool holder A 100 HSK -Spindle diameter 128.57 mm -Maximum spindle speed 2500 rpm -Indexing 360 positions/ 1° - Spindle support - Documentation

x-travel 3.000 mm︱y-travel 2.000 mm︱z-travel 1.600 mm︱control Fanuc 31i Model A ︱main spindle: ︱w-axis 700 mm︱turning speeds 2.000 U/min︱spindle drive 22 kW︱spindle diameter 135 mm︱tool changer: ︱tool taper SK 50 ︱number of tool places 60 Pos.︱max. tool diameter 125 mm︱max. tool length 600 mm︱max. tool weight 20 kg︱change-time tool to tool 30 sec︱change-time chip to chip 70 sec︱work table: ︱table surface area 2.000 x 1.800 mm︱max. table load 10.000 kg︱

---

In our opinion, the machine is in very good condition Used condition and can be viewed under power by appointment become. Accesories: - Special angle milling head, built in 2015 - IKZ, 15 bar - Tool breakage control, Renishaw TS 27 R - Transformer - chip conveyor ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2300 mm︱z-axis 1600 mm︱W-axis (spindle longitudinal) 700 mm︱tool taper ISO 50 ︱spindle turning speed range 5 - 2500 U/min︱spindle motor 26/22 kW︱Control Fanuc 18 LMB ︱table surface area 1600 x 1800 mm︱table load capacity 15000 kg︱table rotation 0,001 °︱Rapid Travel X / Y / Z-Achse 10 m/min︱feeds x/y/z -stepless 1 - 4000 mm/min︱total power requirement kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 7,5 x 4,65 x 7,5 m︱

---

equipped with - CNC control Fanuc 18 LMB - ATC 60-fold - external coolant system - rotary table 1600 x 1800mm - telescopic covers - chip conveyor

spindle diameter 105 mm︱x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1400 mm︱Table area 1750x2000 mm︱turning speeds 16-1400 U/min︱table load max. 4 t︱weight of the machine ca. 18 t︱

---

The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.

spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱work spindle diameter ISO50 mm︱spindle turning speed range 10-2500 U/min︱Control TNC 430 Heidenhain ︱total power requirement kW︱weight of the machine ca. ca. 38 t︱dimensions of the machine ca. m︱

---

gebraucht ︱ 2000 ︱ 3987 ︱ prompt, Zwischenverkauf v ︱ China ︱ 980 €︱ 1 ︱ 31,5 mm︱ MK 3 ︱ 225 mm︱ 100 - 2900 U/min︱ 0,55 / 0,75 kW︱ 600 mm︱ 400 mm︱ 1850 mm︱ 175 kg︱ 150 mm︱ 300 x 300 mm︱ 100 mm︱

---

With stand Height adjustable table Operating manual in German with EC conformity declaration Does not comply with the german UVV and austrian AMVO

spindle diameter 75 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 560 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle diameter 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱

---

Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump

CNC brand Mitsubishi ︱CNC model Meldas C3 ︱Table length 1.440 mm︱Table width 1.600 mm︱Spindle diameter 100 mm ø︱X 550 mm︱Y 1800 mm︱Z/W 1.700/550 mm︱Spindle taper ISO 50 ︱Machine dimensions (lxbxh) 5.680 x 3.400 x 3.700 mm︱

---

spindle diameter 100 mm︱x-travel 1200 mm︱y-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 5,6x3,4x3,x7 m︱

---

Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron