,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Table Type Boring and Milling Machine

          Machinelist: Table Type Boring and Milling Machine


          Table Type Boring and Milling Machine

          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V00154 · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - unbekannt - Heidenhain TNC 135

          Technical details
          spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 900 mm︱z-travel 1000 mm︱w-axis 630 mm︱table load 3 t︱Table dimensions 1000x1120 mm︱voltage 380 V︱taper ISO 50 P.D.B. ︱control Heidenhain TNC 135 ︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1250 mm
            y-travel 900 mm
            z-travel 1000 mm
            w-axis 630 mm
            table load 3 t
            Table dimensions 1000x1120 mm
            voltage 380 V
            taper ISO 50 P.D.B.
            control Heidenhain TNC 135
            total power requirement 15 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine WM WORKS WMG BMT 105 PTP


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03752 · Table Type Boring and Milling Machine

          WM WORKS - WMG BMT 105 PTP - - 2001 -

          Technical details
          spindle diameter 105 mm︱x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1400 mm︱Table area 1750x2000 mm︱turning speeds 16-1400 U/min︱table load max. 4 t︱weight of the machine ca. 18 t︱
          The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            spindle diameter 105 mm
            x-travel 2100 mm
            y-travel 1500 mm
            z-travel 1400 mm
            Table area 1750x2000 mm
            turning speeds 16-1400 U/min
            table load max. 4 t
            weight of the machine ca. 18 t
            Description :
            The techn. Data are manufacturer or operator information
            and therefore non-binding. We reserve the right to prior sale; Our terms and
            conditions of sale apply exclusively.About usMore than 400 of our own machines
            in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore
            than 1000 items Accessories for your workshopYou want to sell machines,
            production lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WH 10 NC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03004 · Table Type Boring and Milling Machine

          TOS - WH 10 NC - - 1993 - Heidenhain

          Technical details
          spindle diameter 100 mm︱x-travel 1250 mm︱y-travel 1100 mm︱z-travel 950 mm︱Table load 3000 kg︱table surface area 1000x1120 mm︱turning speeds 16-1250 U/min︱spindle taper ISO 50 ︱Control Heidenhain ︱total power requirement kW︱weight of the machine ca. 13,4 t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1250 mm
            y-travel 1100 mm
            z-travel 950 mm
            Table load 3000 kg
            table surface area 1000x1120 mm
            turning speeds 16-1250 U/min
            spindle taper ISO 50
            Control Heidenhain
            weight of the machine ca. 13,4 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION BFT 90/5


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02773 · Table Type Boring and Milling Machine

          UNION - BFT 90/5 - - 1993 - Heidenhain

          Technical details
          spindle diameter 102 mm︱x-travel 1600 mm︱y-travel 1000 mm︱z-travel 1600 mm︱Control Heidenhain ︱type TNC 410 ︱table surface area 1000x1120 mm︱Table load 3000 kg︱spindle stroke 710 mm︱spindle turning speed range 4-1600 U/min︱main drive motor 13 kW︱total power requirement kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. m︱
            spindle diameter 102 mm
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 1600 mm
            Control Heidenhain
            type TNC 410
            table surface area 1000x1120 mm
            Table load 3000 kg
            spindle stroke 710 mm
            spindle turning speed range 4-1600 U/min
            main drive motor 13 kW
            weight of the machine ca. 12 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS W100A


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03461 · Table Type Boring and Milling Machine

          TOS - W100A - - 1992 -

          Technical details
          spindle diameter 100 mm︱x-travel 1500 mm︱y-travel 1250 mm︱z-travel 1800 mm︱turning speeds 7,1-1120 U/min︱table surface area 1200x1200 mm︱w-axis 800 mm︱Radial face slide 600 mm︱radial face slide travel 200 mm︱Tailstock mm︱angular milling head ︱digital readout Heidenhain ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 100 mm
            x-travel 1500 mm
            y-travel 1250 mm
            z-travel 1800 mm
            turning speeds 7,1-1120 U/min
            table surface area 1200x1200 mm
            w-axis 800 mm
            Radial face slide 600 mm
            radial face slide travel 200 mm
            digital readout Heidenhain


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHN 13C


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03736 · Table Type Boring and Milling Machine

          TOS - WHN 13C - - 1992 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱w-axis 800 mm︱b-axis 360 °︱spindle turning speed range 1000 U/min︱transmission ratio 4 ︱Control Heidenhain ︱type 355 ︱table surface area 1800x2200 mm︱Table load 12000 kg︱spindle taper ISO 50 ︱width of T-slots 22 mm︱T-slot - distance 160 mm︱Feed 1-6000 mm/min︱table rotating 1,5 U.min-1︱total power requirement 80 KVA︱weight of the machine ca. 36 t︱dimensions of the machine ca. 7,7x7,2x4,9 m︱
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            w-axis 800 mm
            b-axis 360 °
            spindle turning speed range 1000 U/min
            transmission ratio 4
            Control Heidenhain
            type 355
            table surface area 1800x2200 mm
            Table load 12000 kg
            spindle taper ISO 50
            width of T-slots 22 mm
            T-slot - distance 160 mm
            Feed 1-6000 mm/min
            table rotating 1,5 U.min-1
            total power requirement 80 KVA
            weight of the machine ca. 36 t
            dimensions of the machine ca. 7,7x7,2x4,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine SCHARMANN Ecocut 1.3


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02109 · Table Type Boring and Milling Machine

          SCHARMANN - Ecocut 1.3 - - 1989 -

          Technical details
          x-travel 2000 mm︱y-travel 1600 mm︱z-travel 1000 mm︱module Siemens 850M mm︱w-axis 600 mm︱b-axis 360 °︱spindle taper ISO 50 ︱Torque 2350 Nm︱output 40 kw︱spindle turning speed range 28-2800 U/min︱ max 7 bar︱Feed 1-3000 mm/min︱b-axis 2,7 U/min︱size of pallet 1500x1500 mm︱table load 8 t︱T-slots 22H7x 22 mm Tief ︱flute distance 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 2000 mm
            y-travel 1600 mm
            z-travel 1000 mm
            module Siemens 850M mm
            w-axis 600 mm
            b-axis 360 °
            spindle taper ISO 50
            Torque 2350 Nm
            output 40 kw
            spindle turning speed range 28-2800 U/min
            max 7 bar
            Feed 1-3000 mm/min
            b-axis 2,7 U/min
            size of pallet 1500x1500 mm
            table load 8 t
            T-slots 22H7x 22 mm Tief
            flute distance 200 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION CBFK 150/2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02256 · Table Type Boring and Milling Machine

          UNION - CBFK 150/2 - - 1989 - Siemens 840 C SW5.1

          Technical details
          spindle diameter 150 mm︱x-travel 2005 mm︱y-travel 1860 mm︱z-axis 1620 mm︱w-axis 706 mm︱control Siemens 840 C SW5.1 ︱turning speeds 2500 U/min︱surface area 2500 x 2000 mm︱spindle taper ISO 50 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          SK50 tool holder
            spindle diameter 150 mm
            x-travel 2005 mm
            y-travel 1860 mm
            z-axis 1620 mm
            w-axis 706 mm
            control Siemens 840 C SW5.1
            turning speeds 2500 U/min
            surface area 2500 x 2000 mm
            spindle taper ISO 50
            Description :
            SK50 tool holder


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine JUARISTI TS1


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0042 · Table Type Boring and Milling Machine

          JUARISTI - TS1 - - 1989 - Heidenhain TNC 355

          Technical details
          spindle diameter 125 mm︱x-travel 3000 mm︱y-travel 1500 mm︱control Heidenhain TNC 355 ︱taper ISO 50 ︱w-axis 600 mm︱Table dimensions 1200 x 1500 mm︱table load 5 t︱spindle turning speed range 12 - 2300 U/min︱voltage 380 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 125 mm
            x-travel 3000 mm
            y-travel 1500 mm
            control Heidenhain TNC 355
            taper ISO 50
            w-axis 600 mm
            Table dimensions 1200 x 1500 mm
            table load 5 t
            spindle turning speed range 12 - 2300 U/min
            voltage 380 V


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION BFT 90/3-1


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03420 · Table Type Boring and Milling Machine

          UNION - BFT 90/3-1 - - 1988 -

          Technical details
          spindle diameter 90 mm︱x-travel 2000 mm︱y-travel 1250 mm︱z-travel 1250 mm︱spindle turning speed range 8-1600 U/min︱spindle stroke 720 mm︱Feed 1-2500 mm/U︱weight of the machine ca. 9,1 t︱
            spindle diameter 90 mm
            x-travel 2000 mm
            y-travel 1250 mm
            z-travel 1250 mm
            spindle turning speed range 8-1600 U/min
            spindle stroke 720 mm
            Feed 1-2500 mm/U
            weight of the machine ca. 9,1 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine GIDDINGS & LEWIS MC 50


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0162 · Table Type Boring and Milling Machine

          GIDDINGS & LEWIS - MC 50 - - 1987 - G+L 8000A

          Technical details
          spindle diameter 130 mm︱x-travel 1800 mm︱y-travel 1500 mm︱z-travel 1700 mm︱w-axis 915 mm︱Table dimensions 1219x1245 mm︱table load 5 t/ 9 t t︱number of spindle speeds 5-1500 ︱Control G+L 8000A ︱clamping table 2 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 1800 mm
            y-travel 1500 mm
            z-travel 1700 mm
            w-axis 915 mm
            Table dimensions 1219x1245 mm
            table load 5 t/ 9 t t
            number of spindle speeds 5-1500
            Control G+L 8000A
            clamping table 2


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION CBFK 130/2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02735 · Table Type Boring and Milling Machine

          UNION - CBFK 130/2 - - 1987 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 1600 mm︱z-travel 1250 mm︱Control Heidenhain ︱type TNC 426 ︱table surface area 2000x1600 mm︱Table load 12500 kg︱Rotary table 360 °︱spindle turning speed range 12-3000 U/min︱Feed 1-9999 mm/min︱Rapid movement 10000 mm/min︱total power requirement 80 KVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 1250 mm
            Control Heidenhain
            type TNC 426
            table surface area 2000x1600 mm
            Table load 12500 kg
            Rotary table 360 °
            spindle turning speed range 12-3000 U/min
            Feed 1-9999 mm/min
            Rapid movement 10000 mm/min
            total power requirement 80 KVA


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine SCHARMANN Ecocut2.2 TDV 3


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03139 · Table Type Boring and Milling Machine

          SCHARMANN - Ecocut2.2 TDV 3 - - 1986 - Siemens

          Technical details
          spindle diameter 150 mm︱x-travel 3000 mm︱y-travel 2000 mm︱z-travel 1500 mm︱w-axis 700 mm︱spindle taper ISO 50 ︱control Siemens ︱type 850 M mm︱table surface area 2000x1600 mm︱Table load 12000 kg︱turning speeds 12-3000 U/min︱spindle motor 30 kW︱feed 0-6 m/min︱chip conveyor ︱coolant ︱total power requirement 60 kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 8x6,3x5,4 m︱
            spindle diameter 150 mm
            x-travel 3000 mm
            y-travel 2000 mm
            z-travel 1500 mm
            w-axis 700 mm
            spindle taper ISO 50
            control Siemens
            type 850 M mm
            table surface area 2000x1600 mm
            Table load 12000 kg
            turning speeds 12-3000 U/min
            spindle motor 30 kW
            feed 0-6 m/min
            total power requirement 60 kW
            weight of the machine ca. 40 t
            dimensions of the machine ca. 8x6,3x5,4 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine CASTEL Castel 2 N


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02963 · Table Type Boring and Milling Machine

          CASTEL - Castel 2 N - - 1985 - Heidenhain

          Technical details
          spindle diameter 100 mm︱x-travel 2000 mm︱y-travel 1200 mm︱z-travel 1000 mm︱w-axis 500 mm︱control Heidenhain ︱type TNC 155 ︱turning speeds 20-2000 U/min︱spindle taper ISO 50 ︱table surface area 1100x1300 mm︱angular milling head ︱Feed 0-5000 mm/min︱Rapid movement 8000 mm/min︱workpiece weight 3000 kg︱spindle motor 15 kW︱total power requirement 27 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. 5,3x2,9x3,1 m︱
            spindle diameter 100 mm
            x-travel 2000 mm
            y-travel 1200 mm
            z-travel 1000 mm
            w-axis 500 mm
            control Heidenhain
            type TNC 155
            turning speeds 20-2000 U/min
            spindle taper ISO 50
            table surface area 1100x1300 mm
            Feed 0-5000 mm/min
            Rapid movement 8000 mm/min
            workpiece weight 3000 kg
            spindle motor 15 kW
            total power requirement 27 kW
            weight of the machine ca. 14 t
            dimensions of the machine ca. 5,3x2,9x3,1 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine TOS WHN 13 A


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03748 · Table Type Boring and Milling Machine

          TOS - WHN 13 A - - 1985 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 2000 mm︱y-travel 2000 mm︱z-travel 1250 mm︱w-axis 800 mm︱Control Heidenhain ︱type TNC 135 ︱table surface area 1800x1800 mm︱Table load 12000 kg︱power capacity 30 kW︱
          09-08 machine number The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            spindle diameter 130 mm
            x-travel 2000 mm
            y-travel 2000 mm
            z-travel 1250 mm
            w-axis 800 mm
            Control Heidenhain
            type TNC 135
            table surface area 1800x1800 mm
            Table load 12000 kg
            power capacity 30 kW
            Description :
            09-08 machine number

            The techn. Data are manufacturer or operator information
            and therefore non-binding. We reserve the right to prior sale; Our terms and
            conditions of sale apply exclusively.About usMore than 400 of our own machines
            in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore
            than 1000 items Accessories for your workshopYou want to sell machines,
            production lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine PEGARD Precivit 2 PBC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03299 · Table Type Boring and Milling Machine

          PEGARD - Precivit 2 PBC - - 1983 - Siemens

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2000 mm︱z-travel 1240 mm︱w-axis 950 mm︱ CNC ︱Radial face slide diameter 700 mm︱turning speeds 16-1250 U/min︱spindle drive 30 kW︱table surface area 1420x2000 mm︱workpiece weight 12000 kg︱control Siemens ︱type 840 C ︱radial face slide travel 170 mm︱spindle drive 42 kW︱turning speeds 16-1250 U/min︱faceplate speeds from - to 4-315 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 2000 mm
            z-travel 1240 mm
            w-axis 950 mm
            CNC
            Radial face slide diameter 700 mm
            turning speeds 16-1250 U/min
            spindle drive 30 kW
            table surface area 1420x2000 mm
            workpiece weight 12000 kg
            control Siemens
            type 840 C
            radial face slide travel 170 mm
            spindle drive 42 kW
            turning speeds 16-1250 U/min
            faceplate speeds from - to 4-315 U/min


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION BFT 110/5


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0124 · Table Type Boring and Milling Machine

          UNION - BFT 110/5 - - 1982 -

          Technical details
          spindle diameter 110 mm︱x-travel 1950 mm︱y-travel 1600 mm︱w-axis 1000 mm︱spindle turning speed range 5,6 - 1120 (27x) U/min︱table load max. 5-8 t︱voltage 380 V︱total power requirement 25 kW︱weight of the machine ca. . t︱dimensions of the machine ca. 1400 x 1600 mm︱
            spindle diameter 110 mm
            x-travel 1950 mm
            y-travel 1600 mm
            w-axis 1000 mm
            spindle turning speed range 5,6 - 1120 (27x) U/min
            table load max. 5-8 t
            voltage 380 V
            total power requirement 25 kW
            weight of the machine ca. . t
            dimensions of the machine ca. 1400 x 1600 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine CASTEL 2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03044 · Table Type Boring and Milling Machine

          CASTEL - 2 - - 1980 - Bosch1-OSA

          Technical details
          spindle diameter 100 mm︱travel -x axis 2000 mm︱travel -y axis 1200 mm︱travel -z axis 1000 mm︱spindle stroke - max. 500 mm︱table surface area 1250 x 1250 mm︱table rotating 360 °︱max. table load 8000 kg︱spindle taper ISO 50 ︱spindle turning speed range 30 - 1300 U/min︱feeds 2 - 1000 mm/min︱rapid traverse 6 m/min︱drive capacity - spindle motor 14 kW︱coolant ︱voltage 380 V︱control Bosch1-OSA ︱One direction thrust bearing ︱total power requirement 15,0 kW︱weight of the machine ca. t︱dimensions of the machine ca. 4,20 x 3,00 x 3,00 m︱
            spindle diameter 100 mm
            travel -x axis 2000 mm
            travel -y axis 1200 mm
            travel -z axis 1000 mm
            spindle stroke - max. 500 mm
            table surface area 1250 x 1250 mm
            table rotating 360 °
            max. table load 8000 kg
            spindle taper ISO 50
            spindle turning speed range 30 - 1300 U/min
            feeds 2 - 1000 mm/min
            rapid traverse 6 m/min
            drive capacity - spindle motor 14 kW
            voltage 380 V
            control Bosch1-OSA
            total power requirement 15,0 kW
            dimensions of the machine ca. 4,20 x 3,00 x 3,00 m
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine UNION BFT 130/6


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03298 · Table Type Boring and Milling Machine

          UNION - BFT 130/6 - - 1979 -

          Technical details
          spindle diameter 130 mm︱x-travel 2750 mm︱y-travel 2500 mm︱z-travel 1050 mm︱w-axis 1000 mm︱Radial face slide diameter 800 mm︱radial face slide travel 240 mm︱table surface area 1800x2000 mm︱turning speeds 4,8-900 U/min︱workpiece weight 8000 kg︱faceplate speeds from - to 4,5-180 U/min︱Feed 5-2000 mm/min︱threading ︱total power requirement 40 kW︱weight of the machine ca. 37 t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 2750 mm
            y-travel 2500 mm
            z-travel 1050 mm
            w-axis 1000 mm
            Radial face slide diameter 800 mm
            radial face slide travel 240 mm
            table surface area 1800x2000 mm
            turning speeds 4,8-900 U/min
            workpiece weight 8000 kg
            faceplate speeds from - to 4,5-180 U/min
            Feed 5-2000 mm/min
            total power requirement 40 kW
            weight of the machine ca. 37 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine SCHARMANN FB 140 Opticut


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03779 · Table Type Boring and Milling Machine

          SCHARMANN - FB 140 Opticut - - 1973/2000 -

          Technical details
          x-travel 2000 mm︱y-travel 2000 mm︱z-travel 1400 mm︱spindle stroke 1000 mm︱turning speeds 5-800 U/min︱Radial face slide 700 mm︱Radial face slide 2,2-115 U/min︱spindle taper ISO 50 ︱table surface area 2000x1800 mm︱Table load 14000 kg︱total power requirement 42 kW︱weight of the machine ca. 24,5 t︱dimensions of the machine ca. 6,3x5x4,3 m︱
            x-travel 2000 mm
            y-travel 2000 mm
            z-travel 1400 mm
            spindle stroke 1000 mm
            turning speeds 5-800 U/min
            Radial face slide 700 mm
            Radial face slide 2,2-115 U/min
            spindle taper ISO 50
            table surface area 2000x1800 mm
            Table load 14000 kg
            total power requirement 42 kW
            weight of the machine ca. 24,5 t
            dimensions of the machine ca. 6,3x5x4,3 m
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine SCHARMANN Dekamat FB 75 NC321


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01120 · Table Type Boring and Milling Machine

          SCHARMANN - Dekamat FB 75 NC321 - - 1972 -

          Technical details
          spindle diameter 130 mm︱x-travel 2000 mm︱y-travel 1400 mm︱z-travel 1400 mm︱spindle taper ISO 50 ︱table surface area 1000x800 mm︱table load 12 t︱number of spindle speeds 8-1650 U/min︱digital readout ︱total power requirement 12 kW︱weight of the machine ca. 9 t︱
            spindle diameter 130 mm
            x-travel 2000 mm
            y-travel 1400 mm
            z-travel 1400 mm
            spindle taper ISO 50
            table surface area 1000x800 mm
            table load 12 t
            number of spindle speeds 8-1650 U/min
            total power requirement 12 kW
            weight of the machine ca. 9 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine STANKO 2620


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03167 · Table Type Boring and Milling Machine

          STANKO - 2620 - - 1971 -

          Technical details
          spindle diameter 90 mm︱x-travel 1000 mm︱y-travel 1120 mm︱z-travel 1000 mm︱table surface area 1250x1120 mm︱spindle taper MT 5 ︱spindle turning speed range 12,5-1600 U/min︱Radial face slide 800 mm︱Table load 3000 kg︱total power requirement 12,5 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. m︱
            spindle diameter 90 mm
            x-travel 1000 mm
            y-travel 1120 mm
            z-travel 1000 mm
            table surface area 1250x1120 mm
            spindle taper MT 5
            spindle turning speed range 12,5-1600 U/min
            Radial face slide 800 mm
            Table load 3000 kg
            total power requirement 12,5 kW
            weight of the machine ca. 13 t
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine COLLET BFfb 100/110 nu


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03811 · Table Type Boring and Milling Machine

          COLLET - BFfb 100/110 nu - - 1969 -

          Technical details
          spindle diameter 110 mm︱x-travel 2000 mm︱y-travel 1200 mm︱spindle turning speed range 6-1250 U/min︱table surface area 1400x900 mm︱spindle drive motor 12 kW︱spindle taper ISO 50 ︱spindle travel 800 mm︱digital readout ︱z-travel 1000 mm︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 5x3x2 m︱
            spindle diameter 110 mm
            x-travel 2000 mm
            y-travel 1200 mm
            spindle turning speed range 6-1250 U/min
            table surface area 1400x900 mm
            spindle drive motor 12 kW
            spindle taper ISO 50
            spindle travel 800 mm
            z-travel 1000 mm
            weight of the machine ca. 20 t
            dimensions of the machine ca. 5x3x2 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Table Type Boring and Milling Machine SCHARMANN FB 80


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02786 · Table Type Boring and Milling Machine

          SCHARMANN - FB 80 - - 1967 -

          Technical details
          spindle diameter 125 mm︱x-travel 950 mm︱y-travel 900 mm︱spindle taper ISO 50 ︱z-travel 900 mm︱Table dimensions 750x750 mm︱Radial face slide 500 mm︱turning speeds 15-855 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 125 mm
            x-travel 950 mm
            y-travel 900 mm
            spindle taper ISO 50
            z-travel 900 mm
            Table dimensions 750x750 mm
            Radial face slide 500 mm
            turning speeds 15-855 U/min
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          Table Type Boring and Milling Machine from LagerMaschinen
          Table type boring and milling machine from LagerMaschinen

          Buying a new machine for your small or medium-sized business is not without its concerns especially when buying new. With a table type boring and milling machine from LagerMaschinen you can rest assured that your machine will be kept to the highest standard and provide reliable service to your company for years to come. The table type boring and milling machine will serve you far into the future: whether horizontal or vertical calibrated to service wood surfaces or metal parts the table type boring and milling machine from LagerMaschinen is definitely the answer for your machine needs.

          Table type boring and milling machine - advances

          With a table type boring and milling machine you can easily maneuver long pieces of metal wood or other materials. As a result the table type boring and milling machine is a fantastic addition to any manufacturing facility. This machine provides invaluable assistance to workers in the field who make choices based on what the company has purchased. The table type boring and milling machine helps you ensure a safe drive no matter where you're going.

          Everything you need at LagerMaschinen

          Qualified machine specialists can help find the perfect machine for you. Whether you're manufacturing plastics or wooden products the table type boring and milling machine is an abslute draw. The table type boring and milling machine with LagerMaschinen is a sure investment. Our experts not only help you choose the right tool for your ultra-specific needs but will also speak with sellers as well as providing a full point of view from the buyer's perspective.