,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machining Center - Vertical

          Machinelist: Machining Center - Vertical


          Machining Center - Vertical

          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical Kao Ming KMC 3000SV-2300


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-T22022 · Machining Center - Vertical

          Kao Ming - KMC 3000SV-2300 - - 2011 - Fanuc 18i-MB

          Technical details
          Control Fanuc 18i-MB ︱Table size 3000x2000 mm︱Table load 12000 kg︱Number of pallets 1 x︱Movement X-axis 3230 mm︱Movement Y-axis 2200 mm︱Movement Z-axis 700 mm︱Spindle taper MAS BT 50 ︱Spindle Speed 50 - 5200 1/min︱Spindle motor 26/22 kW︱Magazin capacity 40 ︱Required floor space 8130x5139 mm︱Height 4000 mm︱Weight 29000 kg︱
            Control Fanuc 18i-MB
            Table size 3000x2000 mm
            Table load 12000 kg
            Number of pallets 1 x
            Movement X-axis 3230 mm
            Movement Y-axis 2200 mm
            Movement Z-axis 700 mm
            Spindle taper MAS BT 50
            Spindle Speed 50 - 5200 1/min
            Spindle motor 26/22 kW
            Magazin capacity 40
            Required floor space 8130x5139 mm
            Height 4000 mm
            Weight 29000 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HURCO VMX 60t


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19205 · Machining Center - Vertical

          HURCO - VMX 60t - - 2011 - Winmax

          Technical details
          x-travel 1524 mm︱y-travel 660 mm︱z-travel 610 mm︱Control Winmax ︱table load 1350 kg︱turning speeds 12000 U/min︱tool change unit 30-fach ︱tool taper SK 40 ︱Drive 18 kW︱table-size 1676 x 762 mm︱total power requirement 30 KVA︱
          equipped with: - CNC control WINMax (Mill) with simulation graphics & handwheel - tool changer - spindle oil cooler - chip conveyor - tool package - 5 vises - CE mark 13.464h machine hours Almost exclusively aluminum, brass or plastic parts were produced
            x-travel 1524 mm
            y-travel 660 mm
            z-travel 610 mm
            Control Winmax
            table load 1350 kg
            turning speeds 12000 U/min
            tool change unit 30-fach
            tool taper SK 40
            Drive 18 kW
            table-size 1676 x 762 mm
            total power requirement 30 KVA
            Description :
            equipped with:
            - CNC control WINMax (Mill) with simulation graphics & handwheel
            - tool changer
            - spindle oil cooler
            - chip conveyor
            - tool package
            - 5 vises
            - CE mark
            13.464h machine hours
            Almost exclusively aluminum, brass or plastic parts were produced


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical FANUC-STAMA Robodrill T14 ifb


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03933 · Machining Center - Vertical

          FANUC-STAMA - Robodrill T14 ifb - - 2010 -

          Technical details
          X500 Y400 330mmFanuc 31i - Mb ︱z-travel 330 mm︱x-travel 500 mm︱y-travel 400 mm︱table surface area 650 x400 mm︱turning speed range - milling 10000 U/min︱power capacity - milling spindle 7,5 kW︱tool taper BT 30 ︱no. of tools in the magazine 31 Stück︱feed range 1-12000 mm/min︱rapid motion -longitudinal/cross/vertical 36 m/min︱total power requirement 10 kW︱weight of the machine ca. 2200 kg︱dimensions of the machine ca. 2000x2400x2600 mm︱
          CNC FANUC 31 i MB 10000 rpm spindel
            X500 Y400 330mm
            Fanuc 31i - Mb
            z-travel 330 mm
            x-travel 500 mm
            y-travel 400 mm
            table surface area 650 x400 mm
            turning speed range - milling 10000 U/min
            power capacity - milling spindle 7,5 kW
            tool taper BT 30
            no. of tools in the magazine 31 Stück
            feed range 1-12000 mm/min
            rapid motion -longitudinal/cross. 36 m/min
            total power requirement 10 kW
            weight of the machine ca. 2200 kg
            dimensions of the machine ca. 2000x2400x2600 mm
            Description :
            CNC FANUC 31 i MB

            10000 rpm spindel




        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical FANUC-STAMA ROBODRILL ALFA T 14 i FLb


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03599 · Machining Center - Vertical

          FANUC-STAMA - ROBODRILL ALFA T 14 i FLb - - 2010 -

          Technical details
          X 700 Y 400 Z330mmFanuc 31 i - M ︱y-travel 400 mm︱z-travel 330 mm︱x-travel 700 mm︱table surface area 850 x 410 mm︱turning speed range - milling 10000 U/min︱power capacity - milling spindle 12.5 kW︱tool taper BT 30 ︱no. of tools in the magazine 14 Stück︱feed range 300000 mm/min︱rapid motion -longitudinal/cross/vertical 48 m/min︱total power requirement 15 kW︱weight of the machine ca. 2200 kg︱dimensions of the machine ca. 2000x2400x2600 mm︱
          CNC FANUC 31 i MB 10000 rpm spindel
            X 700 Y 400 Z330mm
            Fanuc 31 i - M
            y-travel 400 mm
            z-travel 330 mm
            x-travel 700 mm
            table surface area 850 x 410 mm
            turning speed range - milling 10000 U/min
            power capacity - milling spindle 12.5 kW
            tool taper BT 30
            no. of tools in the magazine 14 Stück
            feed range 300000 mm/min
            rapid motion -longitudinal/cross. 48 m/min
            total power requirement 15 kW
            weight of the machine ca. 2200 kg
            dimensions of the machine ca. 2000x2400x2600 mm
            Description :
            CNC FANUC 31 i MB

            10000 rpm spindel



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MIKRON VCP 600


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03802 · Machining Center - Vertical

          MIKRON - VCP 600 - - 2010 - heidenhain 430

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱control heidenhain 430 ︱table surface area 850 x 530 mm︱table load 0,40 t︱number of T-slots 6 ︱T-slot - distance 63 mm︱T-slot - width 14H12 mm︱spindle turning speed - stepless 100 - 20.000 U/min︱spindle drive 12,00 kW︱tool taper HSK-A63 ︱tool change unit 30 ︱tool diameter 90 mm︱tool diameter with 2 vacant positions 110 mm︱tool length - max. 250 mm︱weight of tools max. 6,00 kg︱cut to cut time ca. 7,00 sec︱feed stepless 0 - 22.000 mm/min︱rapid traverse 22,00 m/min︱
          NICE MACHINE 20000 RPM ITNC HEIDENHAIN 430 with automatque pallete changer 7 palletes includ
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            control heidenhain 430
            table surface area 850 x 530 mm
            table load 0,40 t
            number of T-slots 6
            T-slot - distance 63 mm
            T-slot - width 14H12 mm
            spindle turning speed - stepless 100 - 20.000 U/min
            spindle drive 12,00 kW
            tool taper HSK-A63
            tool change unit 30
            tool diameter 90 mm
            tool diameter with 2 vacant posi. 110 mm
            tool length - max. 250 mm
            weight of tools max. 6,00 kg
            cut to cut time ca. 7,00 sec
            feed stepless 0 - 22.000 mm/min
            rapid traverse 22,00 m/min
            Description :
            NICE MACHINE
            20000 RPM
            ITNC HEIDENHAIN 430
            with automatque pallete changer 7 palletes includ


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical LEADWELL V 50 l


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03976 · Machining Center - Vertical

          LEADWELL - V 50 l - - 2010 -

          Technical details
          x-travel 1270 mm︱y-travel 635 mm︱z-travel 610 mm︱dist. milling spindle - table surface 150 - 760 mm︱Table dimensions 1420 x 610 mm︱table load capacity 1000 kg︱spindle motor 18.5 kW︱spindle speed: 8000 ︱spindle taper BT 40 ︱rapid traverse 20 m/min︱tool change unit 24 places︱weight of tools max. 14 kg︱CNC Controller: Fanuc O i Mc ︱total power requirement 30 KVA︱
          - In Excellent condition - With machien documents - Rigid taping -chip convoyer
            x-travel 1270 mm
            y-travel 635 mm
            z-travel 610 mm
            dist. milling spindle - table su. 150 - 760 mm
            Table dimensions 1420 x 610 mm
            table load capacity 1000 kg
            spindle motor 18.5 kW
            spindle speed: 8000
            spindle taper BT 40
            rapid traverse 20 m/min
            tool change unit 24 places
            weight of tools max. 14 kg
            CNC Controller: Fanuc O i Mc
            total power requirement 30 KVA
            Description :
            - In Excellent condition
            - With machien documents
            - Rigid taping
            -chip convoyer


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical FANUC-STAMA ROBODRILL ALFA T 14 iB  mc 021


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-037455 · Machining Center - Vertical

          FANUC-STAMA - ROBODRILL ALFA T 14 iB mc 021 - - 2009 -

          Technical details
          X500 Y400 330mmFanuc 16i - M ︱x-travel 500 mm︱y-travel 400 mm︱z-travel 330 mm︱table surface area 650 x400 mm︱turning speed range - milling 15000 U/min︱power capacity - milling spindle 7,5 kW︱tool taper BT 30 ︱no. of tools in the magazine 14 Stück︱feed range 1-25000 mm/min︱rapid motion -longitudinal/cross/vertical 36 m/min︱total power requirement 10 kW︱weight of the machine ca. 2200 kg︱dimensions of the machine ca. 2000x2400x2600 mm︱
          CNC FANUC 31 i MB 24000 rpm spindel 4 axis fanuc dia 210 mm ship convoyer o
            X500 Y400 330mm
            Fanuc 16i - M
            x-travel 500 mm
            y-travel 400 mm
            z-travel 330 mm
            table surface area 650 x400 mm
            turning speed range - milling 15000 U/min
            power capacity - milling spindle 7,5 kW
            tool taper BT 30
            no. of tools in the magazine 14 Stück
            feed range 1-25000 mm/min
            rapid motion -longitudinal/cross. 36 m/min
            total power requirement 10 kW
            weight of the machine ca. 2200 kg
            dimensions of the machine ca. 2000x2400x2600 mm
            Description :
            CNC FANUC 31 i MB

            24000 rpm spindel
            4 axis fanuc dia 210 mm
            ship convoyer
            o


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HEDELIUS BC 100 Magnum


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19835 · Machining Center - Vertical

          HEDELIUS - BC 100 Magnum - - 2009 - Siemens 840D

          Technical details
          x-travel 6500 mm︱y-travel 1000 mm︱z-travel 770 mm︱spindle taper ISO 50 ︱spindle turning speed range 30 - 6000 1/min︱spindle drive motor kW︱max. torque on the spindle 540 Nm︱tool change unit 50-fach ︱table surface area 7200 x 1000 mm︱Control Siemens 840D ︱Rapid Travel X / Y / Z-Achse 30 m/min︱total power requirement 40 kVA︱weight of the machine ca. 38 t︱dimensions of the machine ca. 13 x 5 x 3,7 m︱
          equipped with: - CNC Control Siemens 840D - Through spindle coolant - ATC 50-fold - Workpiece probe - Electromagnetic workpiece clamping - Many accessories - Chip Conveyor - Paperbandfilter Machine work hours approx. 64000h. Spindle work hours approx. 29500h
            x-travel 6500 mm
            y-travel 1000 mm
            z-travel 770 mm
            spindle taper ISO 50
            spindle turning speed range 30 - 6000 1/min
            max. torque on the spindle 540 Nm
            tool change unit 50-fach
            table surface area 7200 x 1000 mm
            Control Siemens 840D
            Rapid Travel X / Y / Z-Achse 30 m/min
            total power requirement 40 kVA
            weight of the machine ca. 38 t
            dimensions of the machine ca. 13 x 5 x 3,7 m
            Description :
            equipped with:
            - CNC Control Siemens 840D
            - Through spindle coolant
            - ATC 50-fold
            - Workpiece probe
            - Electromagnetic workpiece clamping
            - Many accessories
            - Chip Conveyor
            - Paperbandfilter

            Machine work hours approx. 64000h. Spindle work hours approx. 29500h


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OKUMA MB 46 VAE


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03659 · Machining Center - Vertical

          OKUMA - MB 46 VAE - - 2008 - OSP P 200 M

          Technical details
          x-travel 762 mm︱y-travel 460 mm︱z-travel 460 mm︱control OSP P 200 M ︱Main spindle: ︱Speed Mainspindle max. 15.000 min/-1︱power capacity - main spindel 22 kW︱tool taper SK 40 ︱work table: ︱table surface area 1.000 x 460 mm︱table height over floor 800 mm︱max. table load 700 kg︱distance spindle nose and table 150 - 610 mm︱number of T-slots 3 ︱Tool-Presetter: ︱number of toolpositions 32 pos.︱max. tool diameter 90 mm︱max. tool-dia with free toolbox 125 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱
          CNC - MachiningCenter Vertical OKUMA - MB 46 VAE
            x-travel 762 mm
            y-travel 460 mm
            z-travel 460 mm
            control OSP P 200 M
            Speed Mainspindle max. 15.000 min/-1
            power capacity - main spindel 22 kW
            tool taper SK 40
            table surface area 1.000 x 460 mm
            table height over floor 800 mm
            max. table load 700 kg
            distance spindle nose and table 150 - 610 mm
            number of T-slots 3
            number of toolpositions 32 pos.
            max. tool diameter 90 mm
            max. tool-dia with free toolbox 125 mm
            max. tool length 300 mm
            max. tool weight 8 kg
            Description :
            CNC - MachiningCenter Vertical
            OKUMA - MB 46 VAE





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical BRIDGEPORT  GX 1000


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03805 · Machining Center - Vertical

          BRIDGEPORT - GX 1000 - - 2008 - CNC SIEMENS 810 d

          Technical details
          x-travel 1000 mm︱y-travel 610 mm︱z-travel 610 mm︱control CNC SIEMENS 810 d ︱table surface area 1150 x 540 mm︱rapid traverse 30/30/30 m/min︱turning speed range 12000 U/min︱power capacity - milling spindle 13 kW︱no. of tools in the magazine 30 Stück︱tool taper BT 40
          CNC FANUC - Synchronised tappin - boxway system 3 axis - RS-232 Interface mm) - higher tourque 200 mm, 180 mm center hight
            x-travel 1000 mm
            y-travel 610 mm
            z-travel 610 mm
            control CNC SIEMENS 810 d
            table surface area 1150 x 540 mm
            rapid traverse 30/30/30 m/min
            turning speed range 12000 U/min
            power capacity - milling spindle 13 kW
            no. of tools in the magazine 30 Stück
            tool taper BT 40
            Description :
            CNC FANUC
            - Synchronised tappin - boxway system 3 axis
            - RS-232 Interface
            mm)
            - higher tourque
            200 mm, 180 mm center hight


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HAAS  VF 4 HE


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03828 · Machining Center - Vertical

          HAAS - VF 4 HE - - 2008 - Haas

          Technical details
          x-travel 1270 mm︱y-travel 508 mm︱z-travel 635 mm︱control Haas ︱table surface area 1320 x 500 mm︱rapid traverse 20 m/min︱table load 800 kg︱turning speed range 8000 1/min︱power capacity - milling spindle 15 kW︱no. of tools in the magazine 20 Stück︱tool taper SK 40 ︱weight of the machine ca. 5.5 t︱dimensions m︱
          GOOD MACHINE IM ME OFFICE UNDER POWER INTERFACE FOR 4 AXIS AND 4 AXIS HAAS INCLUD
            x-travel 1270 mm
            y-travel 508 mm
            z-travel 635 mm
            control Haas
            table surface area 1320 x 500 mm
            rapid traverse 20 m/min
            table load 800 kg
            turning speed range 8000 1/min
            power capacity - milling spindle 15 kW
            no. of tools in the magazine 20 Stück
            tool taper SK 40
            weight of the machine ca. 5.5 t
            Description :
            GOOD MACHINE
            IM ME OFFICE UNDER POWER
            INTERFACE FOR 4 AXIS AND 4 AXIS HAAS INCLUD



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DECKEL MAHO DMC 1035 V


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03846 · Machining Center - Vertical

          DECKEL MAHO - DMC 1035 V - - 2008 - iTNC 530 Heidenhain

          Technical details
          x-travel 1.035 mm︱y-travel 560 mm︱z-travel 510 mm︱control iTNC 530 Heidenhain︱Main spindle: ︱turning speed range - main spindle 10.000 min/-1︱power capacity - main spindel 13 / 9 kW︱max. Torque 83 / 57 Nm︱tool taper SK 40 ︱work table: ︱table surface area 1.200 x 560 mm︱max. table load 1.000 kg︱table height over floor 720 mm︱Tool-Presetter: ︱number of toolpositions 20 pos.︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱max. tool length 300 mm︱change time 1,6 sec︱change-time chip to chip 7,0 sec︱
          CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V HEIDENHAIN ITNC 530 ONLY 7000 SPINDELM HOURS
            x-travel 1.035 mm
            y-travel 560 mm
            z-travel 510 mm
            control iTNC 530 Heidenhain
            turning speed range - main spind. 10.000 min/-1
            power capacity - main spindel 13 / 9 kW
            max. Torque 83 / 57 Nm
            tool taper SK 40
            table surface area 1.200 x 560 mm
            max. table load 1.000 kg
            table height over floor 720 mm
            number of toolpositions 20 pos.
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 130 mm
            max. tool length 300 mm
            change time 1,6 sec
            change-time chip to chip 7,0 sec
            Description :
            CNC - Machining Center Vertical
            DECKEL MAHO - DMC 1035 V HEIDENHAIN ITNC 530
            ONLY 7000 SPINDELM HOURS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI DMC 635 V


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9022 · Machining Center - Vertical

          DMG MORI - DMC 635 V - - 2008 - 840 D sl ShopMill Siemens

          Technical details
          x-travel 635 mm︱y-travel 510 mm︱z-travel 460 mm︱control 840 D sl ShopMill Siemens︱Main spindle: ︱turning speed range - main spindle 20 - 10.000 min/-1︱power capacity - main spindel 13 / 9 kW︱tool taper SK 40 ︱max. Torque 83 / 57 Nm︱tension force 8 kN︱work table: ︱table surface area 790 x 560 mm︱number of T-slots 4 + 1 ︱T-slot - distance 100 mm︱T-slot - width 4x 14H12 / 1x 14H7 mm︱max. table load 600 kg︱table height over floor 720 mm︱distance spindle nose and table 120 - 580 mm︱Tool-Presetter: ︱number of toolpositions 20 pos.︱
          CNC - MachiningCenter Vertical DMG MORI - DMC 635 V - Spindle-hrs: ca. 4.600h - WITHOUT Vice
            x-travel 635 mm
            y-travel 510 mm
            z-travel 460 mm
            control 840 D sl ShopMill Siemens
            turning speed range - main spind. 20 - 10.000 min/-1
            power capacity - main spindel 13 / 9 kW
            tool taper SK 40
            max. Torque 83 / 57 Nm
            tension force 8 kN
            table surface area 790 x 560 mm
            number of T-slots 4 + 1
            T-slot - distance 100 mm
            T-slot - width 4x 14H12 / 1x 14H7 mm
            max. table load 600 kg
            table height over floor 720 mm
            distance spindle nose and table 120 - 580 mm
            number of toolpositions 20 pos.
            Description :
            CNC - MachiningCenter Vertical
            DMG MORI - DMC 635 V

            - Spindle-hrs: ca. 4.600h
            - WITHOUT Vice


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MÜGA (teilueberholt) R4530 (4.Achse)


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20311 · Machining Center - Vertical

          MÜGA (teilueberholt) - R4530 (4.Achse) - - 2008 - MITSUBISHI

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 300 mm︱control MITSUBISHI ︱table-size 500 x 320 mm︱max. table load 200 kg︱spindle taper BT 30 ︱spindle turning speed range 240 - 15.000 U/min︱rapid traverse 48 m/min︱drive capacity - spindle motor 3,7 kW︱tool change unit 12 Pos.︱coolant IKZ 50 bar︱voltage 400 V︱total power requirement 26 KW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,25 x 2,05 x 2,50 m︱band filter unit 1,80 x 0,70 x 1,30 m︱coolant tank 1,20 x 0,90 x 0,50 m︱Spindlecoolant 0,40 x 0,50 x 0,90 m︱Transformer 0,60 x 0,40 x 0,60 m︱
          - serial no.: Q0R1163 - Machine ON: 23.221 h - Control MITSUBISHI - 4th axis - electronic handwheel - Coolant through spindle 50 bar - oil cooler - paper band filter system - various tool holder - mist extraction system Machine was partly reconditioned: New guideways and ball screws in X-/Y- Axis New motor for X-Axis
            x-travel 450 mm
            y-travel 300 mm
            z-travel 300 mm
            control MITSUBISHI
            table-size 500 x 320 mm
            max. table load 200 kg
            spindle taper BT 30
            spindle turning speed range 240 - 15.000 U/min
            rapid traverse 48 m/min
            drive capacity - spindle motor 3,7 kW
            tool change unit 12 Pos.
            coolant IKZ 50 bar
            voltage 400 V
            total power requirement 26 KW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,25 x 2,05 x 2,50 m
            band filter unit 1,80 x 0,70 x 1,30 m
            coolant tank 1,20 x 0,90 x 0,50 m
            Spindlecoolant 0,40 x 0,50 x 0,90 m
            Transformer 0,60 x 0,40 x 0,60 m
            Description :
            - serial no.: Q0R1163
            - Machine ON: 23.221 h
            - Control MITSUBISHI
            - 4th axis
            - electronic handwheel
            - Coolant through spindle 50 bar
            - oil cooler
            - paper band filter system
            - various tool holder
            - mist extraction system
            Machine was partly reconditioned:
            New guideways and ball screws in X-/Y- Axis
            New motor for X-Axis


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OKUMA MB-56VA


          • Dahms Maschinenhandel
          • Max-Planck-Str. 7
          • 86757 Wallerstein
          • Deutschland

          • +491737008807
          • info@werkzeugmaschinen-haendler.de
            www.werkzeugmaschinen-haendler.de
          #4017-003 · Machining Center - Vertical

          OKUMA - MB-56VA - - 2008 - OSP-P200M

          Technical details
          x-travel 1050 mm︱y-travel 560 mm︱z-travel 460 mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
            x-travel 1050 mm
            y-travel 560 mm
            z-travel 460 mm


        • Dahms Maschinenhandel
        • Max-Planck-Str. 7
        • 86757 Wallerstein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical KITAMURA My center 4 XIF


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03974 · Machining Center - Vertical

          KITAMURA - My center 4 XIF - - 2007 - FANUC 16 IMB

          Technical details
          x-travel 1016 mm︱y-travel 510 mm︱z-travel 510 mm︱table surface area 1000 X 522 mm︱turning speeds 20000 U/min︱feed 36 m/min︱rapid traverse 50 m/min︱control FANUC 16 IMB ︱workpiece tool changer 40 FACH ︱tool taper BT 40
          FANUC 16 imb CONTROL chip convoyer hp cooland trought the spinel 20000 rpm bt 40
            x-travel 1016 mm
            y-travel 510 mm
            z-travel 510 mm
            table surface area 1000 X 522 mm
            turning speeds 20000 U/min
            feed 36 m/min
            rapid traverse 50 m/min
            control FANUC 16 IMB
            workpiece tool changer 40 FACH
            tool taper BT 40
            Description :
            FANUC 16 imb CONTROL
            chip convoyer
            hp cooland trought the spinel
            20000 rpm bt 40


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HURON KX 10


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02062 · Machining Center - Vertical

          HURON - KX 10 - - 2007 - SIEMENS 840D SHOPMILL

          Technical details
          x-travel 1000 mm︱y-travel 700 mm︱z-travel 550 mm︱Feed speed x,y,z; 0 - 18 m/min.︱surface area 1250 X 700 mm︱table load 1.5 t︱spindle turning speed - stepless 18000 U/min︱power capacity at 100 % load 15 kW︱spindle taper hsk 63 ︱spindle diameter 90 mm︱tool change unit 20 Plätze; ︱distance between columns 1500 MM mm︱control SIEMENS 840D SHOPMILL
          VERY NICE MACHINE CONTROL SIEMENS 840 D SHOPMILL SPINDEL RPM 24000 HSK 63A MAGASIN 20 TOOLS COOLING TROUNG THE SPINDEL
            x-travel 1000 mm
            y-travel 700 mm
            z-travel 550 mm
            Feed speed x,y,z; 0 - 18 m/min.
            surface area 1250 X 700 mm
            table load 1.5 t
            spindle turning speed - stepless 18000 U/min
            power capacity at 100 % load 15 kW
            spindle taper hsk 63
            spindle diameter 90 mm
            tool change unit 20 Plätze;
            distance between columns 1500 MM mm
            control SIEMENS 840D SHOPMILL
            Description :
            VERY NICE MACHINE CONTROL SIEMENS 840 D SHOPMILL
            SPINDEL RPM 24000 HSK 63A
            MAGASIN 20 TOOLS
            COOLING TROUNG THE SPINDEL


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical LEADWELL V 40


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03711 · Machining Center - Vertical

          LEADWELL - V 40 - - 2007 -

          Technical details
          x-travel 1020 mm︱y-travel 510 mm︱z-travel 610 mm︱table-size 1200 X 510 mm︱spindle taper BT 40 ︱number of spindle speeds 10000 min-1︱tool piece magazine with 24 Plätzen︱total power requirement 25 kVA︱
          FANUC 18 M CONTROL with 4 axis includ CTS 20 BAR CHIP CONVOYER NICE MACHINE
            x-travel 1020 mm
            y-travel 510 mm
            z-travel 610 mm
            table-size 1200 X 510 mm
            spindle taper BT 40
            number of spindle speeds 10000 min-1
            tool piece magazine with 24 Plätzen
            total power requirement 25 kVA
            Description :
            FANUC 18 M CONTROL
            with 4 axis includ
            CTS 20 BAR CHIP CONVOYER NICE MACHINE



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MITSUI SEIKI VERTEX 550  5 axis


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03326 · Machining Center - Vertical

          MITSUI SEIKI - VERTEX 550 5 axis - - 2007 - FANUC 31 IA Fanuc

          Technical details
          X 550 Y 600 Z 500 mmFANUC 31IMB fanuc︱ 60 x with BT 40 ︱z-travel 500 mm︱control FANUC 31 IA Fanuc︱x-travel 600 mm︱y-travel 550 mm︱table surface area 550 X 600 mm︱turning speed range 15000 U/min︱tool taper BT 40 ︱power capacity - milling spindle 15 GEAR BOX kW︱ 60 Stationen︱tool changing time 1 sec︱feed range 52000 mm/min︱rapid motion -longitudinal/cross/vertical 42000 m/min︱total power requirement 35 kW︱weight of the machine ca. 17.500 kg︱dimensions of the machine ca. 4500x2500x3200 mm︱
          VERY STONG MACHINE CONTROL FANUC 31 IA 15000 RPM 60 TOOLS MAGASIN 2 AXIS TILTING TABLE DIA 400 MM A AXIS + 15° -115° C AXIS 360 CIP CONVOYER CTS
            X 550 Y 600 Z 500 mm
            FANUC 31IMB fanuc
            60 x with BT 40
            z-travel 500 mm
            control FANUC 31 IA Fanuc
            x-travel 600 mm
            y-travel 550 mm
            table surface area 550 X 600 mm
            turning speed range 15000 U/min
            tool taper BT 40
            power capacity - milling spindle 15 GEAR BOX kW
            60 Stationen
            tool changing time 1 sec
            feed range 52000 mm/min
            rapid motion -longitudinal/cross. 42000 m/min
            total power requirement 35 kW
            weight of the machine ca. 17.500 kg
            dimensions of the machine ca. 4500x2500x3200 mm
            Description :
            VERY STONG MACHINE
            CONTROL FANUC 31 IA
            15000 RPM
            60 TOOLS MAGASIN
            2 AXIS TILTING TABLE DIA 400 MM
            A AXIS + 15° -115°
            C AXIS 360
            CIP CONVOYER
            CTS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical BROTHER TC S 2A-0


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03905 · Machining Center - Vertical

          BROTHER - TC S 2A-0 - - 2007 - Brother - CNC B 00

          Technical details
          x-travel 700 mm︱y-travel 360 mm︱z-travel 270 mm︱table dimensions 800 x 400 mm︱control Brother - CNC B 00 ︱max. workpiece weight 175 kg︱spindle taper SK 30 ︱turning speeds max. 10000 U/min︱tool turret - number of stations 14 ︱bore capacity in St 60 - core boring 18 mm︱tool length - max. 60 mm︱power capacity 6 kW︱total power requirement 9 kW︱
          BROTHER B-00 CNC GOD NICE MACHINE
            x-travel 700 mm
            y-travel 360 mm
            z-travel 270 mm
            table dimensions 800 x 400 mm
            control Brother - CNC B 00
            max. workpiece weight 175 kg
            spindle taper SK 30
            turning speeds max. 10000 U/min
            tool turret - number of stations 14
            bore capacity in St 60 - core bo. 18 mm
            tool length - max. 60 mm
            power capacity 6 kW
            total power requirement 9 kW
            Description :
            BROTHER B-00 CNC
            GOD NICE MACHINE



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MAZAK Nexus 510C-II


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-10084 · Machining Center - Vertical

          MAZAK - Nexus 510C-II - - 2007 - MAZATROL Matrix

          Technical details
          x-travel 1.060 mm︱y-travel 630 mm︱z-travel 610 mm︱table: 1.300 x 660 mm︱table weight 1.000 Kg︱Control MAZATROL Matrix ︱number of spindle speeds 12.000 U/min/rpm︱spindle motor 15 kW︱Tools changer 30 pos.︱operating hours 49.546 h︱Spindle hours 23.189 h︱chip conveyor Inkl.
          - length measuring tool - 30 tools changer - refrifgeración inner tool - chip extracto
            x-travel 1.060 mm
            y-travel 630 mm
            z-travel 610 mm
            table: 1.300 x 660 mm
            table weight 1.000 Kg
            Control MAZATROL Matrix
            number of spindle speeds 12.000 U/min/rpm
            spindle motor 15 kW
            Tools changer 30 pos.
            operating hours 49.546 h
            Spindle hours 23.189 h
            chip conveyor Inkl.
            Description :
            - length measuring tool

            - 30 tools changer

            - refrifgeración inner tool

            - chip extracto


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HARDINGE-BRIDGEPORT vmc 1000


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03800 · Machining Center - Vertical

          HARDINGE-BRIDGEPORT - vmc 1000 - - 2007 - FANUC OIMC

          Technical details
          x-travel 1000 mm︱y-travel 510 mm︱z-travel 510 mm︱control FANUC OIMC ︱table surface area 1150 x 490 mm︱rapid traverse 30/30/30 m/min︱turning speed range 10000 U/min︱power capacity - milling spindle 13 kW︱no. of tools in the magazine 20 BT 40 Stück︱
          -CNC FANUC O IMC Synchronised tappin - RS-232 Interface CHIP CONVOYER
            x-travel 1000 mm
            y-travel 510 mm
            z-travel 510 mm
            control FANUC OIMC
            table surface area 1150 x 490 mm
            rapid traverse 30/30/30 m/min
            turning speed range 10000 U/min
            power capacity - milling spindle 13 kW
            no. of tools in the magazine 20 BT 40 Stück
            Description :
            -CNC FANUC O IMC
            Synchronised tappin
            - RS-232 Interface
            CHIP CONVOYER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical LEADWELL V 30 i


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03767 · Machining Center - Vertical

          LEADWELL - V 30 i - - 2007 -

          Technical details
          x-travel 760 mm︱y-travel 510 mm︱z-travel 510 mm︱table-size 890 X 500 mm︱spindle taper BT 40 ︱number of spindle speeds 80 - 8000 min-1︱tool piece magazine with 20 Plätzen︱
          FANUC o i MC CONTROL
            x-travel 760 mm
            y-travel 510 mm
            z-travel 510 mm
            table-size 890 X 500 mm
            spindle taper BT 40
            number of spindle speeds 80 - 8000 min-1
            tool piece magazine with 20 Plätzen
            Description :
            FANUC o i MC CONTROL




        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DECKEL MAHO DMC 64 V linear


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5312 · Machining Center - Vertical

          DECKEL MAHO - DMC 64 V linear - - 2007 - Siemens 840 D

          Technical details
          x-travel 640 mm︱y-travel 600 mm︱z-travel 500 mm︱Control Siemens 840 D ︱total power requirement 19 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 5 x 4 x 3 m︱
            x-travel 640 mm
            y-travel 600 mm
            z-travel 500 mm
            Control Siemens 840 D
            total power requirement 19 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 5 x 4 x 3 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •