,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machining Center - Vertical

          Machinelist: Machining Center - Vertical


          Machining Center - Vertical

          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ 15 W


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03839 · Machining Center - Vertical

          CHIRON - FZ 15 W - - 2004 - SIEM 840D

          Technical details
          x-travel 550 mm︱y-travel 400 mm︱z-travel 425 mm︱control SIEM 840D ︱table surface area 2x 660 x 400 mm︱tool taper ISO SK 40 ︱spindle turning speed - stepless 20 - 12.000 U/min︱feed stepless 0 - 60.000 mm/min︱rapid traverse 60 m/min︱feed force X/Y axis 5.000 N︱feed force Z axis 10.000 N︱tool magazin: 20 ︱diameter of tools max. 65 mm︱tool diameter with 2 vacant positions 150 mm︱tool length - max. 220 mm︱spindle diameter in front bearing 70 mm︱max. torque on the spindle max. 180 Nm︱distance between table/spindle 280 - 705 mm︱distance between spindle/column 480 mm︱milling capacity 250 cm³/min︱
          Control SIEMENS 840 D 4th axis on each table. Without coolant unit, was connected to central supply. Machine can be inspected under power. WITH CHIP CONVOYER ISO 40 12000 RPM
            x-travel 550 mm
            y-travel 400 mm
            z-travel 425 mm
            control SIEM 840D
            table surface area 2x 660 x 400 mm
            tool taper ISO SK 40
            spindle turning speed - stepless 20 - 12.000 U/min
            feed stepless 0 - 60.000 mm/min
            rapid traverse 60 m/min
            feed force X/Y axis 5.000 N
            feed force Z axis 10.000 N
            tool magazin: 20
            diameter of tools max. 65 mm
            tool diameter with 2 vacant posi. 150 mm
            tool length - max. 220 mm
            spindle diameter in front bearin. 70 mm
            max. torque on the spindle max. 180 Nm
            distance between table/spindle 280 - 705 mm
            distance between spindle/column 480 mm
            milling capacity 250 cm³/min
            Description :
            Control SIEMENS 840 D 4th axis on each table.
            Without coolant unit, was connected to central supply.
            Machine can be inspected under power.
            WITH CHIP CONVOYER
            ISO 40
            12000 RPM


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON MILL 2000 5 AXIS


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03714 · Machining Center - Vertical

          CHIRON - MILL 2000 5 AXIS - - 2003 - Siemens 840 D POWER MILL

          Technical details
          x-travel 2000 mm︱y-travel 480 mm︱z-travel 750 mm︱control Siemens 840 D POWER MILL ︱table surface area 2400 X 500 mm︱max. table load 1000 kg︱Pendulum table 0 / 180 °︱turning speed range - milling 20000 U/min︱power capacity - milling spindle 27 kW︱max. Torque 180 Nm︱spindle bearing diameter 80 mm︱tool taper SK 40 ︱rapid traverse 40 m/min︱Tool changer 30 pos.︱max. tool diameter 75 mm︱max. tool-dia with free toolbox 105 mm︱max. tool length 250 mm︱max. tool weight 5 kg︱total power requirement 36 kVA︱weight of the machine ca. 5 t︱
          Machining Center - UNIVERSAL 5 AXIS CHIRON MILL 2000 CONTROL SIEMENS 840 POWER MILL WITH NIKKEN 36000° OFF TABLE AND B AXIS IN HEAD
            x-travel 2000 mm
            y-travel 480 mm
            z-travel 750 mm
            control Siemens 840 D POWER MILL
            table surface area 2400 X 500 mm
            max. table load 1000 kg
            Pendulum table 0 / 180 °
            turning speed range - milling 20000 U/min
            power capacity - milling spindle 27 kW
            max. Torque 180 Nm
            spindle bearing diameter 80 mm
            tool taper SK 40
            rapid traverse 40 m/min
            Tool changer 30 pos.
            max. tool diameter 75 mm
            max. tool-dia with free toolbox 105 mm
            max. tool length 250 mm
            max. tool weight 5 kg
            total power requirement 36 kVA
            weight of the machine ca. 5 t
            Description :
            Machining Center - UNIVERSAL 5 AXIS
            CHIRON MILL 2000
            CONTROL SIEMENS 840 POWER MILL
            WITH NIKKEN 36000° OFF TABLE
            AND B AXIS IN HEAD


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON  FZ 15 K S


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03698 · Machining Center - Vertical

          CHIRON - FZ 15 K S - - 2001 - HEIDENHAIN TMC 530

          Technical details
          x-travel 550 mm︱y-travel 400 mm︱z-travel 425 mm︱control HEIDENHAIN TMC 530 ︱table surface area 600 X 350 mm︱tool taper ISO SK 40 ︱spindle turning speed - stepless 20 - 12.000 U/min︱feed stepless 0 - 60.000 mm/min︱rapid traverse 60 m/min︱feed force X/Y axis 5.000 N︱feed force Z axis 10.000 N︱tool magazin: 20 ︱diameter of tools max. 65 mm︱tool diameter with 2 vacant positions 150 mm︱tool length - max. 220 mm︱spindle diameter in front bearing 70 mm︱max. torque on the spindle max. 180 Nm︱distance between table/spindle 280 - 705 mm︱distance between spindle/column 480 mm︱milling capacity 250 cm³/min︱
          Control HEIDENHAIN TNC 530 4th/5 AXIS SIMULTAN IN table. WitH coolant unit Machine can be inspected under power. WITH CHIP CONVOYER ISO 40 12000 RPM
            x-travel 550 mm
            y-travel 400 mm
            z-travel 425 mm
            control HEIDENHAIN TMC 530
            table surface area 600 X 350 mm
            tool taper ISO SK 40
            spindle turning speed - stepless 20 - 12.000 U/min
            feed stepless 0 - 60.000 mm/min
            rapid traverse 60 m/min
            feed force X/Y axis 5.000 N
            feed force Z axis 10.000 N
            tool magazin: 20
            diameter of tools max. 65 mm
            tool diameter with 2 vacant posi. 150 mm
            tool length - max. 220 mm
            spindle diameter in front bearin. 70 mm
            max. torque on the spindle max. 180 Nm
            distance between table/spindle 280 - 705 mm
            distance between spindle/column 480 mm
            milling capacity 250 cm³/min
            Description :
            Control HEIDENHAIN TNC 530 4th/5 AXIS SIMULTAN IN table.
            WitH coolant unit
            Machine can be inspected under power.
            WITH CHIP CONVOYER
            ISO 40
            12000 RPM


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON  FZ 12 S MAGNUM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03153 · Machining Center - Vertical

          CHIRON - FZ 12 S MAGNUM - - 1999 - TNC 46

          Technical details
          x-travel 550 mm︱y-travel 300 mm︱z-travel 425 mm︱control TNC 46 ︱table surface area 900 X 350 mm︱tool taper ISO SK 40 ︱spindle turning speed - stepless 20 - 10.500 U/min︱feed stepless 0 - 40.000 mm/min︱rapid traverse 40 m/min︱feed force X/Y axis 5.000 N︱feed force Z axis 10.000 N︱tool magazin: 20 ︱diameter of tools max. 65 mm︱tool diameter with 2 vacant positions 150 mm︱tool length - max. 220 mm︱spindle diameter in front bearing 70 mm︱max. torque on the spindle max. 180 Nm︱distance between table/spindle 280 - 705 mm︱distance between spindle/column 480 mm︱milling capacity 250 cm³/min︱
          Control HEIDENHAIN TNC 426 With coolant unit WITH CHIP CONVOYER ISO 40 1000 RPM
            x-travel 550 mm
            y-travel 300 mm
            z-travel 425 mm
            control TNC 46
            table surface area 900 X 350 mm
            tool taper ISO SK 40
            spindle turning speed - stepless 20 - 10.500 U/min
            feed stepless 0 - 40.000 mm/min
            rapid traverse 40 m/min
            feed force X/Y axis 5.000 N
            feed force Z axis 10.000 N
            tool magazin: 20
            diameter of tools max. 65 mm
            tool diameter with 2 vacant posi. 150 mm
            tool length - max. 220 mm
            spindle diameter in front bearin. 70 mm
            max. torque on the spindle max. 180 Nm
            distance between table/spindle 280 - 705 mm
            distance between spindle/column 480 mm
            milling capacity 250 cm³/min
            Description :
            Control HEIDENHAIN TNC 426
            With coolant unit
            WITH CHIP CONVOYER
            ISO 40
            1000 RPM


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ12 W high speed


          • IproMac e.K.
          • Ennertsweg 38 b
          • 58675 Hemer
          • Deutschland

          • +49 (0) 170 27 32 014
          • w.schneegass@ipromac.de
            www.ipromac.de
          #2075-9021 · Machining Center - Vertical

          CHIRON - FZ12 W high speed - - 1999 - Siemens 840 D

          Technical details
          x-travel 550 mm︱y-travel 300 mm︱z-travel 425 mm︱tool taper SK 40 ︱control Siemens 840 D ︱total power requirement 12 KVA︱weight of the machine ca. 5 t︱transport dimensions LxWxH 2,1 x 3,1 x 3,0 m︱
          chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth ONTROL SIEMENS 810
            x-travel 550 mm
            y-travel 300 mm
            z-travel 425 mm
            tool taper SK 40
            control Siemens 840 D
            total power requirement 12 KVA
            weight of the machine ca. 5 t
            transport dimensions LxWxH 2,1 x 3,1 x 3,0 m
            Description :

            chiron fz 12 wm
            with changeable plate
            with 2 x 4. axis
            PEISELER WIth ONTROL SIEMENS 810


        • IproMac e.K.
        • Ennertsweg 38 b
        • 58675 Hemer
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ12 WM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03574 · Machining Center - Vertical

          CHIRON - FZ12 WM - - 1998 - Siemens 810

          Technical details
          x-travel 550 mm︱y-travel 300 mm︱z-travel 425 mm︱tool taper SK 40 ︱control Siemens 810 ︱total power requirement 12 KVA︱weight of the machine ca. ca. 4,0 t︱transport dimensions LxWxH 2,05x3,05x3,0 m︱
          chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth ONTROL SIEMENS 810
            x-travel 550 mm
            y-travel 300 mm
            z-travel 425 mm
            tool taper SK 40
            control Siemens 810
            total power requirement 12 KVA
            weight of the machine ca. ca. 4,0 t
            transport dimensions LxWxH 2,05x3,05x3,0 m
            Description :

            chiron fz 12 wm
            with changeable plate
            with 2 x 4. axis
            PEISELER WIth ONTROL SIEMENS 810


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ 08 S


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03697 · Machining Center - Vertical

          CHIRON - FZ 08 S - - 1998 -

          Technical details
          x-travel 300 mm︱y-travel 250 mm︱z-travel 250 mm︱total power requirement 8 kW︱weight of the machine ca. 1.8 t︱
          five axis machine CONTROL FANUC 21 M TABLE 620 X 270 MM SPINDEL 10000 RPM 4/5 axis peiselt includ
            x-travel 300 mm
            y-travel 250 mm
            z-travel 250 mm
            total power requirement 8 kW
            weight of the machine ca. 1.8 t
            Description :
            five axis machine
            CONTROL FANUC 21 M
            TABLE 620 X 270 MM
            SPINDEL 10000 RPM

            4/5 axis peiselt includ


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ12 WM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03038 · Machining Center - Vertical

          CHIRON - FZ12 WM - - 1997 - Siemens 810

          Technical details
          x-travel 550 mm︱y-travel 300 mm︱z-travel 425 mm︱tool taper SK 40 ︱control Siemens 810 ︱total power requirement 12 KVA︱weight of the machine ca. ca. 4,0 t︱transport dimensions LxWxH 2,05x3,05x3,0 m︱
          with changeable plate 4. axis PEISELER WITH HYDRAULIK KLEMPING CONTROL SIEMENS 810
            x-travel 550 mm
            y-travel 300 mm
            z-travel 425 mm
            tool taper SK 40
            control Siemens 810
            total power requirement 12 KVA
            weight of the machine ca. ca. 4,0 t
            transport dimensions LxWxH 2,05x3,05x3,0 m
            Description :
            with changeable plate
            4. axis
            PEISELER WITH HYDRAULIK KLEMPING
            CONTROL SIEMENS 810


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON FZ 15 KW HS


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06442 · Machining Center - Vertical

          CHIRON - FZ 15 KW HS - - 2010 -

          Technical details
          2 ︱Number of axles 4 St.︱tool taper HSK 63 ︱toll turrets 60 ︱weight 9600 kg︱
            2
            Number of axles 4 St.
            tool taper HSK 63
            toll turrets 60
            weight 9600 kg


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy your used vertical machining center from LagerMaschinen.
          A vertical machining center from LagerMaschinen is just what you need.

          A vertical machining center is a tool used in machine shops. As its name indicates the cutters on this machine are vertically oriented. The vertical machining center is ideal for work that involves cutting on one plane or diesinking which is the process of making moulds amongst other things. This type of machining center can be manually or automatically operated. Since the mid 1900s many companies employ a CNC machining center to improve precision. The vertical machining center comes in a wide variety of sizes from small machines that are perfect for hobby machinists to massive machines that fill a room. Regardless of the size machine you need you can be sure to find just the vertical machining center you are looking for at LagerMaschinen.

          LagerMaschinen provides quality machines at bargain prices.

          For many companies – in particular small and new companies - the price of a new vertical machining center can be a burden. Companies involved in milling and machining can trust in LagerMaschinen’s extensive network of experts and professionals: the vertical machine center fulfills rigorous standards ensuring the highest quality possible at a price cheaper that that of a new machine. Businesses involved in moulding and casting need to be sure that their equipment meets safety requirements for materials and operators alike to ensure the best results on the job. With LagerMaschinen by your side you can work with your vertical machining center knowing you have the quality you need at the price you want.