,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          lathe-conventional-electronic

          Machinelist: lathe-conventional-electronic


          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic VDF HEIDENREICH & HARBECK HAMBURG 430


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207336 · lathe-conventional-electronic

          VDF HEIDENREICH & HARBECK - HAMBURG 430 - - 1975 -

          Technical details
          turning length 1000 mm︱turning diameter over bed 430 mm︱turning diameter over slide rest 235 mm︱spindle turning speed range 11.2 - 2000 U/min︱spindle bore 56,0 mm︱morse taper 4 MK︱quill stroke 135 mm︱bed width 333 mm︱spindle taper DIN 55022 Gr. 6︱total power requirement 7,75 kW︱weight of the machine ca. 1950 kg.︱dimensions of the machine ca. 2700 x 1200 x 1600 mm︱
          ** from a workshop for the disabled (!!) Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray
            turning length 1000 mm
            turning diameter over bed 430 mm
            turning diameter over slide rest 235 mm
            spindle turning speed range 11.2 - 2000 U/min
            spindle bore 56,0 mm
            morse taper 4 MK
            quill stroke 135 mm
            bed width 333 mm
            spindle taper DIN 55022 Gr. 6
            total power requirement 7,75 kW
            weight of the machine ca. 1950 kg.
            dimensions of the machine ca. 2700 x 1200 x 1600 mm
            Description :
            ** from a workshop for the disabled (!!)

            Furnishing:
            - robust master/feed spindle machine
            - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6)
            - HEIDENHAIN digital display
            - MULTIFIX steel holder, with insert
            - Movable tailstock
            - chuck key
            - chip rear wall
            - sliding bed stop
            - Protection for bed rails
            - live center
            - Coolant device, with drip tray


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic RAVENSBURG A2,2


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05364 · lathe-conventional-electronic

          RAVENSBURG - A2,2 - - 1975 -

          Technical details
          Ravensburg A2,2 ︱circulation diameter max. 2200 mm︱diameter of quill 90 mm︱weight of the machine ca. 1,4 t︱
            Ravensburg A2,2
            circulation diameter max. 2200 mm
            diameter of quill 90 mm
            weight of the machine ca. 1,4 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic RAVENSBURG K 66 - 3500 ( 4500 )


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4944 · lathe-conventional-electronic

          RAVENSBURG - K 66 - 3500 ( 4500 ) - - 1972 -

          Technical details
          turning diameter Ø 2000 mm︱turning length 3500 mm︱swing diameter over bed slide 1500 mm︱total power requirement 28 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. 10 x 3 x 3 m︱
          Lathe Ø 2000 / 1500 spindle bore 90 mmSpeed range 0.6 - 250 min-1space requirement approx. 10 x 3 x 3 mWeight approx. 22 to Face plate Ø 1500 mmTailstockbed extension 700 mmrollers - support Ø 150 - 1400 mmSteady rest Workspace: Sph.1050x Spw.3500 (4350) Drive: 28
            turning diameter Ø 2000 mm
            turning length 3500 mm
            swing diameter over bed slide 1500 mm
            total power requirement 28 kW
            weight of the machine ca. 22 t
            dimensions of the machine ca. 10 x 3 x 3 m
            Description :
            Lathe Ø 2000 / 1500

            spindle bore 90 mmSpeed range 0.6 - 250 min-1space requirement approx. 10 x 3 x 3 mWeight approx. 22 to
            Face plate Ø 1500 mmTailstockbed extension 700 mmrollers - support Ø 150 - 1400 mmSteady rest
            Workspace: Sph.1050x Spw.3500 (4350)
            Drive: 28


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic HEIDENREICH & HARBECK VDF 18 RO


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06559 · lathe-conventional-electronic

          HEIDENREICH & HARBECK - VDF 18 RO - - 1970 -

          Technical details
          centre distance 1200 mm︱ 540 ︱turning length mm︱serial number 2304 ︱weight of the machine ca. 2 t︱
            centre distance 1200 mm
            540
            serial number 2304
            weight of the machine ca. 2 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic SCHWERDTFEGER UA 20


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-20013 · lathe-conventional-electronic

          SCHWERDTFEGER - UA 20 - - 1970 -

          Technical details
          turning diameter / mm︱turning length / mm︱swing diameter over bed slide / mm︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
          with 3-spindle drilling unit (1 spindle dismantled)
            turning diameter / mm
            turning length / mm
            swing diameter over bed slide / mm
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m
            Description :
            with 3-spindle drilling unit (1 spindle dismantled)


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic KART E2N-750-R


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00349 · lathe-conventional-electronic

          KART - E2N-750-R - - 1969 - konventionell

          Technical details
          turning diameter 250 mm︱turning length 750 mm︱swing diameter over bed slide 250 mm︱total power requirement 2,3 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 3,1x1,4x1,6 m︱
          We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide belt hose was guided. Then the parting width with the Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off. Center distance 750mm Center height 125mm for Ø up to 250mm Speed 36-2,100 rpm Spindle mount MK4 Spindle clearance 26mm 380V 50Hz
          5.4A Longitudinal feeds 0.03-2.18mm/rev Cross feeds 0.015-1.09mm/rev for thread pitches: metric 0.2-7.5mm Modulus 0.25-2.5 inch 4-60G/1" With 4-jaw chuck Ø 150mm. Other accessories according to pictures. Come to Giebelstadt near Würzburg to view the machine. The machine is packed on a wooden pallet and loaded onto a truck by us.
            turning diameter 250 mm
            turning length 750 mm
            swing diameter over bed slide 250 mm
            total power requirement 2,3 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 3,1x1,4x1,6 m
            Description :
            We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and
            timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide
            belt hose was guided. Then the parting width with the
            Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off.

            Center distance 750mm
            Center height 125mm
            for Ø up to 250mm
            Speed 36-2,100 rpm
            Spindle mount MK4
            Spindle clearance 26mm
            380V 50Hz
            5.4A
            Longitudinal feeds 0.03-2.18mm/rev
            Cross feeds 0.015-1.09mm/rev
            for thread pitches:
            metric 0.2-7.5mm
            Modulus 0.25-2.5
            inch 4-60G/1"

            With 4-jaw chuck Ø 150mm. Other accessories according to pictures.

            Come to Giebelstadt near Würzburg to view the machine.

            The machine is packed on a wooden pallet and loaded onto a truck by us.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 2.500 €
          Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic Weisser Heilbronn Gigant


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D616 · lathe-conventional-electronic

          Weisser Heilbronn - Gigant - - 1969 -

          Technical details
          Distance between centers 2500 mm︱Centre height 530 mm︱Swing over bed 1060 mm ø︱Swing over support 700 mm ø︱Spindle boring 102 mm ø︱Steady rest 250 mm ø︱3-Jaw chuck 315 mm ø︱4-Jaw chuck 900 mm ø︱Make 4-jaw Forkardt PSA 900
            Distance between centers 2500 mm
            Centre height 530 mm
            Swing over bed 1060 mm ø
            Swing over support 700 mm ø
            Spindle boring 102 mm ø
            Steady rest 250 mm ø
            3-Jaw chuck 315 mm ø
            4-Jaw chuck 900 mm ø
            Make 4-jaw Forkardt PSA 900
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic MARTIN A 2.2


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06587 · lathe-conventional-electronic

          MARTIN - A 2.2 - - 1966 -

          Technical details
          ︱bed bridge ja579 mm ︱centre distance 2200 mm︱weight 3 t︱
            bed bridge ja
            579 mm
            centre distance 2200 mm
            weight 3 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic MEUSER M III L


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26690 · lathe-conventional-electronic

          MEUSER - M III L - - 1962 -

          Technical details
          turning diameter mm︱turning length mm︱swing diameter over bed slide mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          height of centers: 260 mm
          center distance: 3000 mm
          max. circulation-Ø over bed: über Bett 530 mm
          spindle boring: 67 mm
          Bca9x7hkru
          retainer taper tailstock: 5 MK
          spindle speed: 22 - 1000 rpm
          forwarding feed: längs/plan 0,03-1,3/0,008-0,33 mm/U
          thread pitch: 0,25 - 76 mm
          electrical connection: 380 V, 7,5 kW
          space needed: 4600 x 1400 x 1300 mm
          weight: 3200 kg
            Description :
            height of centers: 260 mm

            center distance: 3000 mm

            max. circulation-Ø over bed: über Bett 530 mm

            spindle boring: 67 mm

            Bca9x7hkru

            retainer taper tailstock: 5 MK

            spindle speed: 22 - 1000 rpm

            forwarding feed: längs/plan 0,03-1,3/0,008-0,33 mm/U

            thread pitch: 0,25 - 76 mm

            electrical connection: 380 V, 7,5 kW

            space needed: 4600 x 1400 x 1300 mm

            weight: 3200 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic VDF V3


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D709 · lathe-conventional-electronic

          VDF - V3 - - 1953 -

          Technical details
          Distance between centers 3000 mm︱Centre height 260 mm︱Swing over bed 520 mm ø︱Swing over support 280 mm ø︱Swing in the gap 660 mm ø︱Spindle boring 62 mm ø︱Steady rest 150 mm ø︱3-Jaw chuck 300 mm ø︱4-Jaw chuck 500 mm ø︱
          Including: Quick change holder Digital readout Conical ruler
            Distance between centers 3000 mm
            Centre height 260 mm
            Swing over bed 520 mm ø
            Swing over support 280 mm ø
            Swing in the gap 660 mm ø
            Spindle boring 62 mm ø
            Steady rest 150 mm ø
            3-Jaw chuck 300 mm ø
            4-Jaw chuck 500 mm ø
            Description :
            Including:
            Quick change holder
            Digital readout
            Conical ruler


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic Schaublin 102-604


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D075 · lathe-conventional-electronic

          Schaublin - 102-604 - - 1952 -

          Technical details
          Distance between centers 350 mm︱Centre height 100 mm︱Swing over bed 200 mm ø︱3-Jaw chuck 100 mm ø︱
            Distance between centers 350 mm
            Centre height 100 mm
            Swing over bed 200 mm ø
            3-Jaw chuck 100 mm ø
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203008 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 45 - 1800 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 3,3 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 45 - 1800 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 3,3 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck DK11-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Revolving steady rest - passage diam. max. 65 mm
            - coolant device
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - slip clutch
            - Revolver stop with fine adjustment
            - Thread clock
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 560-2000 PRO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203115 · lathe-conventional-electronic

          BERNARDO - TITAN 560-2000 PRO - - -

          Technical details
          turning length 2000 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1500 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱quill: 5 MK︱spindle bore 105 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 2720 kg.︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool
            turning length 2000 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1500 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            quill: 5 MK
            spindle bore 105 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 2720 kg.
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic TONGIL TIPL-5/530 x 2050


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-27181 · lathe-conventional-electronic

          TONGIL - TIPL-5/530 x 2050 - - -

          Technical details
          turning diameter mm︱turning length mm︱swing diameter over bed slide mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          height of centers: 270 mm
          center distance: 2050 mm
          Bwprgqjfo7
          max. circulation-Ø over bed: über Bett 530 mm
          spindle boring: 78 mm
          spindle retainer: Camlock D1 8"
          retainer taper tailstock: 5 MK
          spindle speed: 33 - 1600 rpm
          forwarding feed: längs/plan 0,049-0,681/0,022-0,314 mm/U
          thread pitch: 0,5 - 7 mm
          electrical connection: 380 V, 7,5 kW
          space needed: 3600 x 1100 x 1200 mm
          weight: 3100 kg
            Description :
            height of centers: 270 mm

            center distance: 2050 mm

            Bwprgqjfo7

            max. circulation-Ø over bed: über Bett 530 mm

            spindle boring: 78 mm

            spindle retainer: Camlock D1 8"

            retainer taper tailstock: 5 MK

            spindle speed: 33 - 1600 rpm

            forwarding feed: längs/plan 0,049-0,681/0,022-0,314 mm/U

            thread pitch: 0,5 - 7 mm

            electrical connection: 380 V, 7,5 kW

            space needed: 3600 x 1100 x 1200 mm

            weight: 3100 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER COMMODOR


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207345 · lathe-conventional-electronic

          WEILER - COMMODOR - - -

          Technical details
          turning length 1000 mm︱turning diameter over bed 380 mm︱turning diameter over slide rest 190 mm︱number of spindle speeds 25 - 2000 U/min.︱turning speeds 18 Stk.︱spindle bore Ø 56,0 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱quill stroke 150 mm︱bed width 310 mm︱spindle taper DIN 55027 / 6 ︱feeds - longitudinal 0,022 - 0,8 mm/U︱feeds - cross 0,011 - 0,4 mm/U︱thread M 0,3 - 10,0 mm︱voltage 380 V︱total power requirement 7,5 kW︱weight of the machine ca. 1600 kg︱range L-W-H 2320 x 1400 x 1600 mm︱
          Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207345
            turning length 1000 mm
            turning diameter over bed 380 mm
            turning diameter over slide rest 190 mm
            number of spindle speeds 25 - 2000 U/min.
            turning speeds 18 Stk.
            spindle bore Ø 56,0 mm
            tailstock quill taper MT DIN 228 / MK 4
            quill stroke 150 mm
            bed width 310 mm
            spindle taper DIN 55027 / 6
            feeds - longitudinal 0,022 - 0,8 mm/U
            feeds - cross 0,011 - 0,4 mm/U
            thread M 0,3 - 10,0 mm
            voltage 380 V
            total power requirement 7,5 kW
            weight of the machine ca. 1600 kg
            range L-W-H 2320 x 1400 x 1600 mm
            Description :

            Lathe with precision ground and induction hardened bed.
            Very suitable, for example, for use in workshops and teaching facilities.

            Furnishing:
            - robust lead and pull spindle lathe
            - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key
            - MULTIFIX steel holder - size B - with 3x inserts
            - movable tailstock, including keyless chuck
            - Chip protection back wall
            - EMERGENCY stop button at the front
            - adjustable bed stop
            - Coolant system including coolant pan
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207345


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER PRO 360


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203096 · lathe-conventional-electronic

          BERNARDO - MASTER PRO 360 - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52,0 mm︱turning speeds 70 - 2.000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 3 MK︱quill travel 100 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1825 x 750 x 1600 mm︱
          scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            swing diameter over bed slide 220 mm
            turning dia. in gap 502 mm
            spindle bore 52,0 mm
            turning speeds 70 - 2.000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 3 MK
            quill travel 100 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1825 x 750 x 1600 mm
            Description :
            scope of delivery :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 60 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 280 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 380-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203117 · lathe-conventional-electronic

          BERNARDO - MASTER 380-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 380 mm︱turning dia. in gap 490 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1920 x 800 x 1660 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool Special accessories included in the price: - 3-axis digital display
            turning length 1000 mm
            turning diameter 380 mm
            turning dia. in gap 490 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1920 x 800 x 1660 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool

            Special accessories included in the price:
            - 3-axis digital display


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 660-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203100 · lathe-conventional-electronic

          BERNARDO - TITAN 660-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 660 mm︱turning dia. in gap 900 mm︱turning diameter over slide 460 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3.300 kg.︱dimensions 4.630 x 1.200 x 1.529 mm︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool
            turning length 3000 mm
            turning diameter 660 mm
            turning dia. in gap 900 mm
            turning diameter over slide 460 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3.300 kg.
            dimensions 4.630 x 1.200 x 1.529 mm
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - slip clutch
            - Rapid traverse lengthways and flat
            - LED machine light
            - 3-jaw steel chuck PO3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - change gears
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO Standard 165 V-D


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203140 · lathe-conventional-electronic

          BERNARDO - Standard 165 V-D - - -

          Technical details
          turning length 1000 mm︱turning diameter 350 mm︱turning dia. in gap 450 mm︱spindle bore 40,0 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4︱taper in tailstock 3 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 529 kg.︱range L-W-H 1730x700x1340 mm︱
          Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool
            turning length 1000 mm
            turning diameter 350 mm
            turning dia. in gap 450 mm
            spindle bore 40,0 mm
            turning speeds 70 - 2000 U/min
            bed width 180 mm
            spindle taper 55029 D 1-4
            taper in tailstock 3 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 529 kg.
            range L-W-H 1730x700x1340 mm
            Description :
            Scope of delivery:
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-160 mm / D4
            - Face plate 200 mm / D4, according to DIN 55029
            - Fixed bezel - passage diam. max. 60 mm
            - Live steady rest - passage diam. max. 60 mm
            - clamping disc 250 mm
            - Quadruple steel holder
            - Shaft fixing device
            - Protective device at steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - coolant device
            - Pull-out chip tray
            - Frequency converter
            - Foot pedal with brake function according to CE
            - bulkhead
            - Thread clock
            - LED machine light
            - Digital speed display
            - reducing sleeve
            - change gears
            - 2 center points
            - underframe
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO MASTER 180-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203120 · lathe-conventional-electronic

          BERNARDO - MASTER 180-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱turning dia. in gap 480 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 540 kg.︱range L-W-H 1920 x 750 x 1600 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - underframe - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            turning dia. in gap 480 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 540 kg.
            range L-W-H 1920 x 750 x 1600 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - underframe
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic CAZENEUVE HB 500


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26298 · lathe-conventional-electronic

          CAZENEUVE - HB 500 - - -

          Technical details
          turning diameter mm︱turning length mm︱swing diameter over bed slide mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          height of centers: 250 mm
          center distance: 750 mm
          max. circulation-Ø over bed: ueber Bett 500 mm
          spindle boring: 41 mm
          spindle retainer:
          retainer taper tailstock: 4 MK
          spindle speed: 32 - 2500 rpm
          forwarding feed: laengs/plan mm/U
          thread pitch:
          electrical connection: 380 V, ca. 5,5 kW
          space needed: 2400 x 950 x 1350 mm
          weight: ca. 1400 kg
          Iu3mhmegq
            Description :
            height of centers: 250 mm

            center distance: 750 mm

            max. circulation-Ø over bed: ueber Bett 500 mm

            spindle boring: 41 mm

            spindle retainer:

            retainer taper tailstock: 4 MK

            spindle speed: 32 - 2500 rpm

            forwarding feed: laengs/plan mm/U

            thread pitch:

            electrical connection: 380 V, ca. 5,5 kW

            space needed: 2400 x 950 x 1350 mm

            weight: ca. 1400 kg

            Iu3mhmegq


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 800-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203147 · lathe-conventional-electronic

          BERNARDO - TITAN 800-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 800 mm︱turning dia. in gap 1000 mm︱turning diameter over slide 540 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3820 kg.︱dimensions 4800 x 1320 x 1580 mm︱
          Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reducing sleeve - chip rear wall - Operating tool
            turning length 3000 mm
            turning diameter 800 mm
            turning dia. in gap 1000 mm
            turning diameter over slide 540 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3820 kg.
            dimensions 4800 x 1320 x 1580 mm
            Description :
            Scope of delivery
            - 3-axis digital display ES-12 V with LCD display
            - Cable routing via energy chain
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disc 500 mm
            - Fixed bezel - Passage diam. 180mm max
            - Revolving bezel - passage diam. 100mm max
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First fill with Shell Tellus 46
            - Rapid traverse longitudinal and face
            - slip clutch
            - Cooling device
            - Quick change steel holder with 4 inserts
            - Protective device for quick-change tool holder
            - LED machine light
            - Change gears
            - Reducing sleeve
            - chip rear wall
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203099 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Vario Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO TITAN 660 - 2000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203006 · lathe-conventional-electronic

          BERNARDO - TITAN 660 - 2000 - - -

          Technical details
          turning length 2000 mm︱centre height 330 mm︱swing diameter over bed slide 660 mm︱swing diameter over slide rest 460 mm︱turning dia. in gap 900 mm︱spindle bore 105 mm︱turning speeds 25 - 1600 U/min︱bed width 400 mm︱spindle taper 55029 D 1-8︱taper in tailstock 5 MK︱quill travel 235 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2900 kg.︱range L-W-H 3630 x 1200 x 1520 mm︱
          Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool
            turning length 2000 mm
            centre height 330 mm
            swing diameter over bed slide 660 mm
            swing diameter over slide rest 460 mm
            turning dia. in gap 900 mm
            spindle bore 105 mm
            turning speeds 25 - 1600 U/min
            bed width 400 mm
            spindle taper 55029 D 1-8
            taper in tailstock 5 MK
            quill travel 235 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2900 kg.
            range L-W-H 3630 x 1200 x 1520 mm
            Description :
            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - Slip clutch
            - Rapid traverse longitudinally and flatly
            - LED machine light
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disk 450 mm
            - Fixed bezel - Passage diam. max. 180 mm
            - Revolving bezel - Passage diam. max. 120mm
            - 2 centering points
            - Motor with magnetic brake according to CE standards
            - Foot pedal with braking function according to CE
            - Initial filling with Shell Tellus 46
            - Coolant device
            - Quick-change tool holder with 4 inserts
            - Protective device for quick-change tool holder
            - Interchangeable wheels
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - Operating tool


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •