,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe OPTIMUM OptiTurn TH 3610


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12309 · Center Lathe

          OPTIMUM - OptiTurn TH 3610 - - 2018 / Demo -

          Technical details
          turning diameter over bed 356 mm︱turning diameter over slide rest 225 mm︱turning length 980 mm︱centre height 180 mm︱bed width 187 mm︱speeds 8: 70 - 2000 U/min︱quill stroke 120 mm︱total power requirement 1,5 kW︱diameter of quill 42 mm︱spindle bore 52 mm︱feeds - longitudinal 32: 0,052 - 1,392 mm/min︱feeds - cross 32: 0,014 - 0,38 mm/min︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 1,95 x 0,73 x 1,35 m︱Electric 400 Volt ︱3 jaw chuck 200 mm︱Multifix-steel holder SWH 3 E ︱Applications for rapid transfer steel-holder 3 ︱Food - Stop ︱Chuck protection geschaltet
          Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx. 20 operating hours on original pallet. Purpose of use no longer applies, that's why the machine is sold. Machine dealer with own stock of 1600 m².
            turning diameter over bed 356 mm
            turning diameter over slide rest 225 mm
            turning length 980 mm
            centre height 180 mm
            bed width 187 mm
            speeds 8: 70 - 2000 U/min
            quill stroke 120 mm
            total power requirement 1,5 kW
            diameter of quill 42 mm
            spindle bore 52 mm
            feeds - longitudinal 32: 0,052 - 1,392 mm/min
            feeds - cross 32: 0,014 - 0,38 mm/min
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 1,95 x 0,73 x 1,35 m
            3 jaw chuck 200 mm
            Multifix-steel holder SWH 3 E
            Applications for rapid transfer . 3
            Chuck protection geschaltet
            Description :
            Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx.
            20 operating hours on original pallet. Purpose of use no longer applies, that's
            why the machine is sold.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Lathes Center Lathe NARDINI MS 175 E / 800


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12258 · Center Lathe

          NARDINI - MS 175 E / 800 - - -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 200 mm︱turning length 800 mm︱spindle bore 46 mm︱spindle turning speed range 18: 25 - 2000 U/min︱spindle head Din 55027 Gr. 5 ︱total power requirement 4,4/2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 2 x 1 x 1,8 m︱Electric 380 Volt ︱3 jaw chuck neu 160 mm︱Multifix-toolholder with tapers ︱Rear chip protect ︱Faceplate Röhm 310 mm︱Motor brake ︱Video available on our website. ︱Condition: ready for operation
          Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own stock of 1600 m².
            turning diameter over bed 350 mm
            turning diameter over slide rest 200 mm
            turning length 800 mm
            spindle bore 46 mm
            spindle turning speed range 18: 25 - 2000 U/min
            spindle head Din 55027 Gr. 5
            total power requirement 4,4/2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 2 x 1 x 1,8 m
            3 jaw chuck neu 160 mm
            Faceplate Röhm 310 mm
            Description :
            Universal lathe from the training area with new 3-jaw chuck, face plate and
            multifix holder. It was not heavily used, which can be seen from the little
            paint wear on the back wall.
            We ask interested private parties to refrain from making an inquiry, as it is a
            well-preserved professional machine and is therefore too expensive (+ VAT!) for
            hobby mechanics.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Mechanician s Lathe

          used Lathes Mechanician s Lathe WEILER MD 260p


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12349 · Mechanician s Lathe

          WEILER - MD 260p - - -

          Technical details
          turning diameter over bed 260 mm︱turning diameter over slide rest 140 mm︱turning length 500 mm︱centre height 125 mm︱bed width 160 mm︱spindle turning speed range 16: 110-3600 U/min︱spindle bore 28 mm︱face slide travel 120 mm︱upper slide-adjustment 120 mm︱tailstock quill taper MT 2 ︱tailstock quill adjustment 80 mm︱drive motor 0,37 / 0,88 kW︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1,3 x 0,6 x 1,2 m︱Electric 380 Volt ︱chuck 140 mm︱Collet device with collets 24: 1-21 mm ︱Boring chuck
            turning diameter over bed 260 mm
            turning diameter over slide rest 140 mm
            turning length 500 mm
            centre height 125 mm
            bed width 160 mm
            spindle turning speed range 16: 110-3600 U/min
            spindle bore 28 mm
            face slide travel 120 mm
            upper slide-adjustment 120 mm
            tailstock quill taper MT 2
            tailstock quill adjustment 80 mm
            drive motor 0,37 / 0,88 kW
            weight of the machine ca. 350 kg
            dimensions of the machine ca. 1,3 x 0,6 x 1,2 m
            chuck 140 mm
            Collet device with collets 24: 1-21 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Plum & Partner Werkzeugmaschinen GmbH

          Contacter le commerçant



            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstrasse 32
            32257 - Bunde
            Allemagne
            + 49 05223 574444 "> + 49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Profil de commerçant





          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.

          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspannplatte · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräszentrum · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidemaschine · Bördelmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Falzformer · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Furnierpresse · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mechanikerdrehbank · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Portal - Bearbeitungszentrum · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Punktschweißmaschine · Querteilanlage mit Schwenkschere · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleif - Bürstanlage · Schleifmaschinenzubehör · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tellerschleifmaschine · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·