,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Metal Processing

          Machinelist: Metal Processing


          Center Lathe

          used Metal Processing Center Lathe PINACHO SC-250x1000


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09211F · Center Lathe

          PINACHO - SC-250x1000 - - 2017 -

          Technical details
          turning diameter over bed 502 mm︱turning diameter over slide rest 310 mm︱turning length 1000 mm︱centre height 250 mm︱swing diameter over bed slide 440 mm︱bed width 300 mm︱upper slide travel cross 250 mm︱travel of upper support 130 mm︱spindle nose DIN 55026 Form A ︱spindle bore 58 mm︱transmission ratio 3 ︱spindle turning speed - stepless 40-2300 U/min︱tailstock quill taper MT 4 ︱tailstock quill diameter 68 mm︱tailstock quill adjustment 200 mm︱main drive 5,5 kW︱coolant pump 0,1 kW︱turning tool - shaft cross cut 25 x 25 mm︱3-axis digital readout FAGOR Innova 30iT ︱total power requirement ca. 5,8 kW︱
            turning diameter over bed 502 mm
            turning diameter over slide rest 310 mm
            turning length 1000 mm
            centre height 250 mm
            swing diameter over bed slide 440 mm
            bed width 300 mm
            upper slide travel cross 250 mm
            travel of upper support 130 mm
            spindle nose DIN 55026 Form A
            spindle bore 58 mm
            transmission ratio 3
            spindle turning speed - stepless 40-2300 U/min
            tailstock quill taper MT 4
            tailstock quill diameter 68 mm
            tailstock quill adjustment 200 mm
            main drive 5,5 kW
            coolant pump 0,1 kW
            turning tool - shaft cross cut 25 x 25 mm
            3-axis digital readout FAGOR Innova 30iT
            total power requirement ca. 5,8 kW
            Description :

          Datasheet
          Request / Contact

          CNC Lathe

          used Metal Processing CNC Lathe MAZAK QT 200MSx500


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09210F · CNC Lathe

          MAZAK - QT 200MSx500 - - 2020 - Mazatrol SmoothG

          Technical details
          turning diameter 380 mm︱turning length 511 mm︱control Mazatrol SmoothG ︱turning diameter over slide 276 mm︱max. swing diameter over bed 675 mm︱Standard machining diameter 276 mm︱bar material dia. 65 mm︱x-axis 234 mm︱rapid traverse X-axis 30 m/min︱z-axis 625 mm︱rapid traverse Z-axis 33 m/min︱Main spindle: ︱turning speeds 35 - 5000 U/min︱spindle nose A2-6 ︱spindle bore 76 mm︱Motor output (40%ED) 26 KW︱ 22 KW︱Max. Torque 465 Nm︱Counter spindle: ︱turning speeds 6000 U/min︱
          incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding
            turning diameter 380 mm
            turning length 511 mm
            control Mazatrol SmoothG
            turning diameter over slide 276 mm
            max. swing diameter over bed 675 mm
            Standard machining diameter 276 mm
            bar material dia. 65 mm
            x-axis 234 mm
            rapid traverse X-axis 30 m/min
            z-axis 625 mm
            rapid traverse Z-axis 33 m/min
            turning speeds 35 - 5000 U/min
            spindle nose A2-6
            spindle bore 76 mm
            Motor output (40%ED) 26 KW
            22 KW
            Max. Torque 465 Nm
            turning speeds 6000 U/min
            Description :
            incl. the following accessories:
            - Signal light (3-colour LED), rectangular
            - High-performance coolant system (1.1 kW)
            Flow rate max. 17.6 l/min, pressure (at pump) 5 bar.
            - Additional coolant nozzle main spindle
            - Preparation for oil mist extraction electrical/mechanical flange 98mm
            - Preparation for bar feed
            - Robot interface (Advance/Profibus)
            - Chip conveyor with low ejection height
            - Overload monitoring system
            - Drilling cycle with torque-dependent chip breaking
            - Preliminary use of a hollow clamping cylinder on counter spindle
            - Hollow clamping device incl. draw tube + cylinder
            - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52
            - Chuck Hainbuch Spanntop Nova Axfix special mini size 52
            - 2 x collets
            - Changing device for collet chuck

            STANDARD ACCESSORIES
            Automatic on/off and warm-up function
            Air blowing device on the chuck on the counter spindle
            Use of linear systems with guide carriage
            USB connection (1 connection)
            Set of manuals in electronic form on CD
            C-axis main spindle Input accuracy 0.0001°
            Spindle positioning counter spindle without C-axis Input accuracy 0.001°
            Tool turret with 12 stations VDI,
            Operator door with locking switch
            Double foot switch for both main and counter spindle
            Hydraulic pressure interlock
            Fully enclosed work area
            Work area lighting
            Safety precautions in accordance with global standards
            High-performance coolant system (520W)
            Flow rate max. 11.5 l/min.
            Complete coolant system
            Automatic opening/closing of the chuck jaws
            Automatic tool eye
            Absolute positioning system
            Preparation for chip conveyor (lateral)
            Synchronisation of main and counter spindle
            Synchronised tapping with milling spindle
            Relocation Detector
            Mazatrol SmoothG control
            19" LCD colour screen (touch screen)
            User macro (600 variables)
            EIA/ISO input function
            Optional stop (optional stop)
            Tool path check in the background
            Thread cutting function (G33)
            Polar coordinate input (EIA)
            Drawing data direct input function
            Interface for LAN
            SD memory card I/F

            - Second-hand machine without warranty
            - All dimensions, weights and performance specifications are non-binding
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Metal Processing milling machining centers - vertical MAZAK VTC-820/20


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09204F · milling machining centers - vertical

          MAZAK - VTC-820/20 - - 2019 - Mazatrol Smooth G

          Technical details
          x-travel 2.000 mm︱y-travel 820 mm︱z-travel 720 mm︱Control Mazatrol Smooth G ︱spindle taper SK 40 ︱spindle turning speed range 35 - 12.000 U/min︱spindle motor 22 kW︱distance spindle centre table top edge 140 - 860 mm︱table load 1700 Kg︱rapid travel x/y/z 50 m/min︱table width 820 mm︱table length 2500 mm︱table height over floor 870 mm︱T-slots 7 ︱T-slot - width 18 mm︱T-slot - distance 100 mm︱tool change unit 48 ︱tool changing time 4,7 sec︱wotkpiece diameter with 2 vacant positions 130 mm︱workpiece diameter at full load 80 mm︱
          STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the following special accessories: - Internal air supply with rotating spindle - 1 set of paper manuals - Tool magazine for 48 tools - Pulse handwheel 1 (removable) - Additional work area lighting - Preparation for cooling through the spindle 70 bar - Coolant pump with 25 bar - Hinged belt conveyor, on the left side - Drilling cycle with torque-dependent chip breaking - Synchronised tapping - Rapid traverse constant inclination angle during movement - All dimensions, weights and performance data are non-binding - Used machine without warranty - Subject to prior sale -
            x-travel 2.000 mm
            y-travel 820 mm
            z-travel 720 mm
            Control Mazatrol Smooth G
            spindle taper SK 40
            spindle turning speed range 35 - 12.000 U/min
            spindle motor 22 kW
            distance spindle centre table to. 140 - 860 mm
            table load 1700 Kg
            rapid travel x/y/z 50 m/min
            table width 820 mm
            table length 2500 mm
            table height over floor 870 mm
            T-slots 7
            T-slot - width 18 mm
            T-slot - distance 100 mm
            tool change unit 48
            tool changing time 4,7 sec
            wotkpiece diameter with 2 vacant. 130 mm
            workpiece diameter at full load 80 mm
            Description :
            STANDARD ACCESSORIES

            Transformer for the European market
            USB port (1 port)
            Mazak standard colour
            Spindle speed 12,000 min-1 (steep taper 40)
            Work area lighting

            SAFETY DEVICES
            Operator door with locking switch
            Work area panelling
            The splash guard encloses the working area from the side.
            Fully enclosed work area
            Protection against chips, coolant and access to the work area during automatic
            machining.
            Safety precautions in accordance with global standards

            COOLANT SUPPLY
            Coolant supply through spindle (pressure at the pump = 5 bar)
            Complete coolant system includes pumps, valves, pipework and nozzles
            for the efficient production of quality components.

            FACTORY AUTOMATION
            Automatic switch on/off and warm-up function
            Automatic switch-on of a warm-up cycle via digital timer

            MEASUREMENT SYSTEM
            Tool length measurement and tool breakage detection

            CHIP DISPOSAL
            Factory preparation for chip conveyor (left)

            NUMERICAL CONTROL
            Fixed control/operating unit
            Relocation Detector
            Mazatrol SmoothG control unit
            19" LCD colour screen (touch screen)
            Mazak tapping/drilling cycle Tornado (Mazatrol)
            By drilling and tapping in helical machining mode, a wide range of diameters
            a wide range of diameters can be machined at high speed with
            a wide range of diameters can be machined at high speed with just one tool.
            This function minimises programming and
            machining times.
            EIA/ISO input function
            Tool path check in the background
            The tool path of a programme can be checked even if another programme number is
            programme number is called up and processed in automatic mode.
            3D coordinate conversion
            Shape compensation for rotating axes
            Mazacc 2D software (contour correction)
            Accuracy is maintained at high feed rates.
            Mazacc-3D software package for high-speed machining
            High-speed and high-accuracy machining for contours defined in the finest
            programme
            contours defined in the finest programme increments.
            MAZACC-3D high-speed software package (NO456) is additionally required.
            Control with high smoothing
            Interface for LAN
            SD Memory Card I/F
            Smooth standard software for M/C
            - NO443 B) MAZACC-2D software (workpiece shape compensation)
            - NO444 D) MAZACC-3D high-speed software package
            - NO445 B) Shape compensation for rotating axes
            - NO497 D) High accuracy control for finishing operations
            - Seamless corner point control
            - Variable acceleration control
            - Ultra high speed machining mode
            - NO498 Rapid traverse paths Rounding function
            Absolute positioning system

            Machine incl. the following special accessories:
            - Internal air supply with rotating spindle
            - 1 set of paper manuals
            - Tool magazine for 48 tools
            - Pulse handwheel 1 (removable)
            - Additional work area lighting
            - Preparation for cooling through the spindle 70 bar
            - Coolant pump with 25 bar
            - Hinged belt conveyor, on the left side
            - Drilling cycle with torque-dependent chip breaking
            - Synchronised tapping
            - Rapid traverse constant inclination angle during movement

            - All dimensions, weights and performance data are non-binding
            - Used machine without warranty
            - Subject to prior sale -
          Datasheet
          Request / Contact
          used Metal Processing milling machining centers - vertical MAZAK VCN 410 A


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09205F · milling machining centers - vertical

          MAZAK - VCN 410 A - - 2003 - PC Fusion 640M

          Technical details
          x-travel 560 mm︱y-travel 410 mm︱z-travel 510 mm︱control PC Fusion 640M ︱spindle taper SK40 - DIN 69871 ︱turning speed range 35 - 12.000 U/min︱rapid travel x/y/z max. 36 m/min︱feed stepless 36 m/min︱distance spindle /table max. 660 mm︱distance spindle /table min. 150 mm︱tool change unit ︱no. of tools in the magazine 30 Stück︱diameter of tools max. 80 mm︱wotkpiece diameter with 2 vacant positions 125 mm︱max. tool weight 8 kg︱max. tool length 350 mm︱change-time chip to chip ca. 2,9 sec︱table: ︱table length 900 mm︱table width 410 mm︱
          Further technical data: Main drive power, AC motor 5 min. rated power 18.5 kW / 10 min. rated power 15 kW 30 min. rated power 11 kw / 100% continuous operation 7.5 kW Machine data: Pneumatic pressure 5 bar / 700 l/min Required installation area approx. 5.2 m² Machine color Light grey/light blue/dark grey/grey Standard accessories - CNC control Mazatrol PC FUSION CNC 640M Nexus Dialog programming with color graphic screen) - MAZAK Monitoring System C (AFC, TBR, TLM): Adaptive feed control (AFC) Tool breakage monitoring (TBR) Tool life monitoring and replacement tool call (TLM) - Navigation monitoring display - Machining navigation - Tool magazine for 30 tools - Tool length measuring device - Complete coolant system - Coolant and chip protection - Chip conveyor attachment preparation - Work area lighting - 3.5" floppy disk drive - 1 set of manuals Special accessories: - Additional flushing of the covers - Performance package Contents of the package: - Common variables (600 pairs) - MAZAK Tapping Tornado (EIA/ISO) - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), Correction of the 3D tool (G40-G42) Scaling (G50, G51) and others - EIA/ISO, constant feed (G93) When using this function the feed rate remains constant for straight line and curve combinations on the contour the contour remains constant. - EIA/ISO tool length measurement (G37) - EIA/ISO, program unit stop function Program sequence is stopped automatically when the Program unit is stopped automatically. -MAZACC-2D (Mazatrol EIA/ISO) Precision control function for precise vector vector interpolation and optimum acceleration acceleration and deceleration on edges and radii. This enables improved improved two-dimensional shape accuracy. accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d`Andrea tool) - Hinged belt conveyor
            x-travel 560 mm
            y-travel 410 mm
            z-travel 510 mm
            control PC Fusion 640M
            spindle taper SK40 - DIN 69871
            turning speed range 35 - 12.000 U/min
            rapid travel x/y/z max. 36 m/min
            feed stepless 36 m/min
            distance spindle /table max. 660 mm
            distance spindle /table min. 150 mm
            no. of tools in the magazine 30 Stück
            diameter of tools max. 80 mm
            wotkpiece diameter with 2 vacant. 125 mm
            max. tool weight 8 kg
            max. tool length 350 mm
            change-time chip to chip ca. 2,9 sec
            table length 900 mm
            table width 410 mm
            Description :
            Further technical data:
            Main drive power, AC motor
            5 min. rated power 18.5 kW / 10 min. rated power 15 kW
            30 min. rated power 11 kw / 100% continuous operation 7.5 kW

            Machine data:
            Pneumatic pressure 5 bar / 700 l/min
            Required installation area approx. 5.2 m²

            Machine color Light grey/light blue/dark grey/grey

            Standard accessories
            - CNC control Mazatrol PC FUSION CNC 640M Nexus
            Dialog programming with color graphic screen)
            - MAZAK Monitoring System C (AFC, TBR, TLM):
            Adaptive feed control (AFC)
            Tool breakage monitoring (TBR)
            Tool life monitoring and replacement tool call (TLM)
            - Navigation monitoring display
            - Machining navigation
            - Tool magazine for 30 tools
            - Tool length measuring device
            - Complete coolant system
            - Coolant and chip protection
            - Chip conveyor attachment preparation
            - Work area lighting
            - 3.5" floppy disk drive
            - 1 set of manuals

            Special accessories:
            - Additional flushing of the covers
            - Performance package
            Contents of the package:
            - Common variables (600 pairs)
            - MAZAK Tapping Tornado (EIA/ISO)
            - EIA/ISO input function
            - EIA/ISO special function
            Spiral interpolation (G02.1, G03.1),
            Correction of the 3D tool (G40-G42)
            Scaling (G50, G51) and others
            - EIA/ISO, constant feed (G93)
            When using this function
            the feed rate remains constant for
            straight line and curve combinations on the contour
            the contour remains constant.
            - EIA/ISO tool length measurement (G37)
            - EIA/ISO, program unit stop function
            Program sequence is stopped automatically when the
            Program unit is stopped automatically.
            -MAZACC-2D (Mazatrol EIA/ISO)
            Precision control function for precise vector
            vector interpolation and optimum acceleration
            acceleration and deceleration on edges
            and radii. This enables improved
            improved two-dimensional shape accuracy.
            accuracy.
            - Additional workpiece coordinate
            system (G54.1 P1 - 48) 48 pairs
            - Spiral machining function (G33) for
            boring head machining
            (e.g. with d`Andrea tool)
            - Hinged belt conveyor
          Datasheet
          Request / Contact

          Section Shear - Combined

          used Metal Processing Section Shear - Combined PEDDINGHAUS Peddimaster 60/100 H


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09165F · Section Shear - Combined

          PEDDINGHAUS - Peddimaster 60/100 H - - 1986 -

          Technical details
          round bar steel - mm︱square edge steel - mm︱L-beam 120 x 13 mm︱hole punhing press: pressure 60 t︱hole punching press: throat 510 mm︱hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm︱shear: flat material 500 x 14 mm︱shear: flat material 400 x 16 mm︱shear: flat material 180 x 20 mm︱shear: flat material 120 x 21 mm︱shear: flat material 100 x 22 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,8 m︱
          Hydraulic Section Shear - Combined
            round bar steel - mm
            square edge steel - mm
            L-beam 120 x 13 mm
            hole punhing press: pressure 60 t
            hole punching press: throat 510 mm
            hole punching press: capacity (d. Ø 27 in 17 mm
            shear: flat material 500 x 14 mm
            shear: flat material 400 x 16 mm
            shear: flat material 180 x 20 mm
            shear: flat material 120 x 21 mm
            shear: flat material 100 x 22 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.

          Mager  &  Wedemeyer Werkzeugmaschinen GmbH  28309 - Bremen Europaallee 24a Deutschland


          Contact Trader


            Mager & Wedemeyer Werkzeugmaschinen GmbH
           Europaallee 24a
            28309 - Bremen
            Deutschland
            +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
            jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
            Contact person:

           




          Machine category


          Bearbeitungszentrum - Vertikal · CNC Drehmaschine · Leit- und Zugspindeldrehmaschine · Profilstahlschere - Kombiniert · Stangenzuführung ·