,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Punching Machine - hydraulic

          Machinelist: Punching Machine - hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 5950 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 5950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2606


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011154 · Plate Shear - Hydraulic

          BAYKAL - HGL 2606 - - NEU -

          Technical details
          sheet width 2560 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 15 Stück︱engine output 11 kW︱machine weight ab. 4670 kg︱dimensions 3350 x 2800 x 1550 mm︱
            sheet width 2560 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 15 Stück
            engine output 11 kW
            machine weight ab. 4670 kg
            dimensions 3350 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2106 - - NEU -

          Technical details
          sheet width 2060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 13 Stück︱engine output 11 kW︱machine weight ab. 3850 kg︱dimensions 2850 x 2800 x 1550 mm︱
            sheet width 2060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 13 Stück
            engine output 11 kW
            machine weight ab. 3850 kg
            dimensions 2850 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 4106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011156 · Plate Shear - Hydraulic

          BAYKAL - HGL 4106 - - NEU -

          Technical details
          sheet width 4060 mm︱plate thickness 6 mm︱System pressure 200 kg/cm2︱down holder 23 Stück︱engine output 11 kW︱machine weight ab. 9400 kg︱dimensions 4940 x 2750 x 1560 mm︱
            sheet width 4060 mm
            plate thickness 6 mm
            System pressure 200 kg/cm2
            down holder 23 Stück
            engine output 11 kW
            machine weight ab. 9400 kg
            dimensions 4940 x 2750 x 1560 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 4110


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011184 · Plate Shear - Hydraulic

          BAYKAL - MGH 4110 - - NEU -

          Technical details
          sheet width 4100 mm︱plate thickness 10 mm︱cutting angle 2 °︱ 10 ︱rear stop 5 - 1000 mm︱hydr. holding down 23 ︱oil volume 170 l︱total power requirement 22 kW︱machine weight ab. 13.000 kg︱dimensions 4900 x 2800 x 1900 mm︱
            sheet width 4100 mm
            plate thickness 10 mm
            cutting angle 2 °
            10
            rear stop 5 - 1000 mm
            hydr. holding down 23
            oil volume 170 l
            total power requirement 22 kW
            machine weight ab. 13.000 kg
            dimensions 4900 x 2800 x 1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS 85.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94147 · Plate Shear - Hydraulic

          RAS - 85.30 - - ca. 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement 7,50 kW︱weight of the machine ca. 4,20 t︱dimensions of the machine ca. m︱
          - CNC controlled back gauge 10 – 1000mm - central cutting gap adjustment - Pneumatic sheet metal support - Angle stop 2500 mm - 3 support arms
            sheet width 3100 mm
            plate thickness 4,00 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,20 t
            Description :
            - CNC controlled back gauge 10 – 1000mm
            - central cutting gap adjustment
            - Pneumatic sheet metal support
            - Angle stop 2500 mm
            - 3 support arms


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30-16 RA


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01256 · Plate Shear - Hydraulic

          STEINER - HTS 30-16 RA - - ca. 1978 -

          Technical details
          sheet width 3050 mm︱plate thickness 16 mm︱distance between columns - mm︱back stop - adjustable 1000 mm︱total power requirement kW︱weight of the machine ca. 15 t︱
          Acc.: electr. back gauge with DRO, table extensions
            sheet width 3050 mm
            plate thickness 16 mm
            distance between columns - mm
            back stop - adjustable 1000 mm
            weight of the machine ca. 15 t
            Description :
            Acc.: electr. back gauge with DRO, table extensions


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic METALLKRAFT HTBS-T 3100-60


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94158 · Plate Shear - Hydraulic

          METALLKRAFT - HTBS-T 3100-60 - - 2017 - D-Touch 7

          Technical details
          sheet width 3100 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱
          ** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual
            sheet width 3100 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            cutting angle 2,0 °
            no. of strokes 15 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 14 Stück
            work height max. 865 mm
            Column width 3515 mm
            throat 50.0 mm
            Control D-Touch 7
            oil volume 200 l
            engine output 15.0 kW
            voltage 400 V
            weight 7.650 kg
            range L-W-H 4110 x 2200 x 2100 mm
            Description :
            ** from a maintenance workshop (vehicle construction)
            ** maintained condition (!!)
            ** New price ~ 41.000 euros
            ** Special price on request

            Furnishing:
            - robust electro-hydraulic sheet metal shears
            - CNC control unit D-Touch 7 control ("touchscreen")
            * Anti-reflective, robust 7" color touch screen control panel
            * easy positioning to the desired size
            * Positioning accuracy 0.1 mm
            * unlimited material definition in the material library
            * Intuitive menu navigation
            * Separate display for actual and target value
            * Clearance function of the back gauge
            * Cutting length control via adjustable stroke length
            * Cutting counter
            * Automatic stop of the machine when the programmed cuts are reached
            - CNC electric motor adjustable back gauge
            * Travel distance max. 1,000 mm
            * Backgauge adjustment via ball screws and linear guides
            - constant, low cutting angle for optimal cutting results
            - heavy steel construction in welded construction
            - Ergonomically positioned and clear control panel
            - Hold-down device arranged close to the cutting edge
            - split, fold-up finger protection 1000 mm
            - Self-regulating hold-down pressure
            - manual cutting gap adjustment via adjustment lever
            * with central adjustment lever on the right side of the stand
            - Light barrier for the backgauge area
            - 1x side stop .. L = 1500 mm
            - 2x support arms.. L = 1000 mm each
            - wide sheet metal supports with ball rollers
            - mobile foot switch with emergency stop function
            - high-quality and regrindable knives
            - Hydraulic components MANNESMANN REXROTH or BOSCH
            - Electrics SIEMENS or TELEMECANQUE
            - Operation manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA / METALLKRAFT HTBS-T 3100-60


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325322 · Plate Shear - Hydraulic

          DURMA / METALLKRAFT - HTBS-T 3100-60 - - 2017 - D-Touch 7

          Technical details
          sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱
          ** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322
            sheet width 3100 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            cutting angle 2,0 °
            no. of strokes 15 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 14 Stück
            work height max. 865 mm
            Column width 3515 mm
            throat 50.0 mm
            Control D-Touch 7
            oil volume 200 l
            engine output 15.0 kW
            voltage 400 V
            weight 7.650 kg
            range L-W-H 4110 x 2200 x 2100 mm
            Description :
            ** from a maintenance workshop (vehicle construction)
            ** maintained condition (!!)
            ** New price ~ 41.000 euros
            ** Special price on request

            Furnishing:
            - robust electro-hydraulic sheet metal shears
            - CNC control unit D-Touch 7 control ("touchscreen")
            * Anti-reflective, robust 7" color touch screen control panel
            * easy positioning to the desired size
            * Positioning accuracy 0.1 mm
            * unlimited material definition in the material library
            * Intuitive menu navigation
            * Separate display for actual and target value
            * Clearance function of the back gauge
            * Cutting length control via adjustable stroke length
            * Cutting counter
            * Automatic stop of the machine when the programmed cuts are reached
            - CNC electric motor adjustable back gauge
            * Travel distance max. 1,000 mm
            * Backgauge adjustment via ball screws and linear guides
            - constant, low cutting angle for optimal cutting results
            - heavy steel construction in welded construction
            - Ergonomically positioned and clear control panel
            - Hold-down device arranged close to the cutting edge
            - split, fold-up finger protection 1000 mm
            - Self-regulating hold-down pressure
            - manual cutting gap adjustment via adjustment lever
            * with central adjustment lever on the right side of the stand
            - Light barrier for the backgauge area
            - 1x side stop .. L = 1500 mm
            - 2x support arms.. L = 1000 mm each
            - wide sheet metal supports with ball rollers
            - mobile foot switch with emergency stop function
            - high-quality and regrindable knives
            - Hydraulic components MANNESMANN REXROTH or BOSCH
            - Electrics SIEMENS or TELEMECANQUE
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic LVD CS 31/6


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-104912 · Plate Shear - Hydraulic

          LVD - CS 31/6 - - 2014 -

          Technical details
          sheet width 3100 mm︱plate thickness 6,35 mm︱weight of the machine ca. 5,5 t︱distance between columns mm︱total power requirement kW︱dimensions of the machine ca. m︱
          motorized limit stop behind cutting angle adjustment die clearance adjustment foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6,35 mm Schnittlänge / max. cutting length 3100 mm Hinteranschlag / arrester behind 750 mm Anzahl der Hübe min/max / number of strokes min/max 12/45 /min Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            sheet width 3100 mm
            plate thickness 6,35 mm
            weight of the machine ca. 5,5 t
            Description :
            motorized limit stop behind
            cutting angle adjustment
            die clearance adjustment
            foot switch

            Technische Daten / technical details:
            Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet)
            6,35 mm
            Schnittlänge / max. cutting length 3100 mm
            Hinteranschlag / arrester behind 750 mm
            Anzahl der Hübe min/max / number of strokes min/max 12/45 /min
            Antriebsleistung / drive capacity 11 kW
            Gewicht der Maschine / weight 5500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HEZINGER B10-3000


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94150 · Plate Shear - Hydraulic

          HEZINGER - B10-3000 - - 2013 - ELGO P40T

          Technical details
          sheet width 3100 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle 2.0 °︱down holder 14 Stück︱no. of strokes 13 - 18 Hub/min︱back stop - adjustable 1000 mm︱Control ELGO P40T ︱column arm 250 mm︱oil volume 265 l︱engine output 22,0 kW︱weight 9600 kg︱range L-W-H 4700 x 2300 x 2200 mm︱
          ** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual
            sheet width 3100 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            cutting angle 2.0 °
            down holder 14 Stück
            no. of strokes 13 - 18 Hub/min
            back stop - adjustable 1000 mm
            Control ELGO P40T
            column arm 250 mm
            oil volume 265 l
            engine output 22,0 kW
            weight 9600 kg
            range L-W-H 4700 x 2300 x 2200 mm
            Description :
            ** New price from 56.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic sheet metal plate shears "oscillating cut"
            - ELGO NC control - model "P40T Touch", front left control panel
            - CNC electro-motorized back gauge, with ball screws
            * including retraction function selectable
            * Fold-out function for sheets longer than 1,000 mm
            - manual cutting gap adjustment
            - 1x side stop, with T-slot and mm scale
            - 2x support arms, with T-slot and mm scale
            - 1x freely movable foot switch with emergency stop button
            - Ball rollers in the support table
            - front finger protection
            - FIESSLER rear protection device
            - original instruction manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HEZINGER B10-3000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325300 · Plate Shear - Hydraulic

          HEZINGER - B10-3000 - - 2013 - ELGO P40T

          Technical details
          sheet width 3100 mm︱plate thickness 10.0 mm︱thickness at "Niro-steel" 6.0 mm︱cutting angle 2.0 °︱down holder 14 Stück︱no. of strokes 13 - 18 Hub/min︱back stop - adjustable 1000 mm︱Control ELGO P40T ︱column arm 250 mm︱oil volume 265 l︱engine output 22,0 kW︱weight 9600 kg︱range L-W-H 4700 x 2300 x 2200 mm︱
          ** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300
            sheet width 3100 mm
            plate thickness 10.0 mm
            thickness at "Niro-steel" 6.0 mm
            cutting angle 2.0 °
            down holder 14 Stück
            no. of strokes 13 - 18 Hub/min
            back stop - adjustable 1000 mm
            Control ELGO P40T
            column arm 250 mm
            oil volume 265 l
            engine output 22,0 kW
            weight 9600 kg
            range L-W-H 4700 x 2300 x 2200 mm
            Description :
            ** New price from 56.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic sheet metal plate shears "oscillating cut"
            - ELGO NC control - model "P40T Touch", front left control panel
            - CNC electro-motorized back gauge, with ball screws
            * including retraction function selectable
            * Fold-out function for sheets longer than 1,000 mm
            - manual cutting gap adjustment
            - 1x side stop, with T-slot and mm scale
            - 2x support arms, with T-slot and mm scale
            - 1x freely movable foot switch with emergency stop button
            - Ball rollers in the support table
            - front finger protection
            - FIESSLER rear protection device
            - original instruction manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •