,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Mandrel tube bending machine

          Machinelist: Mandrel tube bending machine


          Mandrel tube bending machine

          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Mega Bender 030 / Top 030


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6387 · Mandrel tube bending machine

          ERCOLINA - Mega Bender 030 / Top 030 - - 2014 -

          Technical details
          tube diameter 60 mm︱wall strength 3 mm︱bending radius min. 2 x Rohr-Ø ÷ R200 mm︱bending angle 0 - 180 °︱gas tube pipelines 2" (60.,3mm) mm︱speed stufenlos 0,5 - 2,0 ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱
          - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle
            tube diameter 60 mm
            wall strength 3 mm
            bending radius min. 2 x Rohr-Ø ÷ R200 mm
            bending angle 0 - 180 °
            gas tube pipelines 2" (60.,3mm) mm
            speed stufenlos 0,5 - 2,0
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            Description :
            - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic
            design (6000 mm pipe slide length)
            - Electromechanical drive of the bending axis
            - hydraulic clamping
            - mandrel feed / extract
            - 30 programs x 9 bending angle + correction angle


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12117 · Mandrel tube bending machine

          TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

          Technical details
          tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website.
          Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².
            tube diameter 6 - 28 mm
            wall strength 2 mm
            bending radius min. 2 x D
            Control IPU 20
            bending radius max. 5,0 x D mm
            bending angle max. 190 °
            arbor length 3000 mm
            operating pressure 180 bar
            hydraulic motor 4 kW
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
            Bending segments 15-20-26-28 mm
            Bending mandrels 4
            Operation panel 0,5 x 0,6 x 1,03 m
            Description :
            Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
            20 angles and display in the control panel for bending angle specification,
            angle detection and angle measurement via absolute value encoder, autom. tool
            plate reset, Turning device with digital display, hydr. quick chuck, aut.
            Mandrel lubrication, adjustable length stops.
            Operating modes: MANUAL and semi-automatic.
            Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
            clamp forward / backward, mandrel forward / backward, bending forward /
            backward /, locking forward / backward, mandrel lubrication, turning device
            forward / backward, plate reset, length stop forward, emergency stop.
            The machine comes from a prototype construction and was only used a little
            until 2000. After that, the machines of this department were sold. However, the
            purchaser did not use the pipe bending machine and therefore it has only stood
            in the warehouse and has not worked since then.
            Please notice that the price of a new machine today is over € 60.000,--.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ CNC 25 MR


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02675 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - CNC 25 MR - - 1994 -

          Technical details
          tube diameter 25 mm︱wall strength 2 mm︱bending radius min. 10 mm︱Control ︱bending radius max. 75 mm︱total power requirement 11 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. m︱
            tube diameter 25 mm
            wall strength 2 mm
            bending radius min. 10 mm
            bending radius max. 75 mm
            total power requirement 11 kW
            weight of the machine ca. 1,45 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01220 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

          Technical details
          tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱
          - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm
            tube diameter max. 38 mm
            wall strength 2 mm
            bar material dia. min. 10 mm
            bending radius min. 35 mm
            bending radius max. 150 mm
            pull up length of tube 4500 mm
            bending angle max. 180 °
            accuracy of bending angle ± 0,2 °
            total power requirement 7,5 kW
            weight of the machine ca. 1,2 t
            dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m
            Description :
            - with 8-pos. bending angle pre-selection
            - crawler gear control
            - positioning device by hand
            - tube twist device

            Following bending tools are with the machine:
            - ø 10 mm, radius 27,5 mm
            - ø 12 mm, radius 35 mm
            - ø 12 mm, radius 56 mm
            - ø 15 mm, radius 35 mm
            - ø 15 mm, radius 57,5 mm
            - ø 18 mm, radius 35 mm
            - ø 18 mm, radius 59 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA TB80-A/P80NC-4


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2040 · Mandrel tube bending machine

          ERCOLINA - TB80-A/P80NC-4 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien64000 €︱ 1286.4 €︱ 76 mm︱ 4535 mm︱ 1145 mm︱ 1400 mm︱ 1488 kg︱ 18 cm³︱ 76 x 3,6 mm︱ 76 x 2,3 mm︱ 70x70x3 mm︱ 70x50x3 mm︱ 70x50x6 mm︱ 76 mm︱ 200 mm︱ 10 mm︱ 195 °︱
          Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI)
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            64000 €
            1286.4 €
            76 mm
            4535 mm
            1145 mm
            1400 mm
            1488 kg
            18 cm³
            76 x 3,6 mm
            76 x 2,3 mm
            70x70x3 mm
            70x50x3 mm
            70x50x6 mm
            76 mm
            200 mm
            10 mm
            195 °
            Description :
            Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C)

            New TCPlus control
            • 7” colour touch screen
            • Icons for ease use
            • Automatic mode, manual mode, programming mode
            • Advanced OFFSET function
            • Easy language change
            • Auto-tuning of the main machine components
            • Programmable bending speed for each single bend of
            the program
            • Unlimited programs possibility (USB port)
            • Every program can contain up to 30 different bends
            • Available extensions of 2 meters each (optional)
            • Tie bar (optional - art. TB80-TI)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Ercobender EB76 CNC V7S


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1081 · Mandrel tube bending machine

          ERCOLINA - Ercobender EB76 CNC V7S - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien121200 €︱ 2411.88 €︱ 76 mm︱ 5700 mm︱ 1100 mm︱ 1550 mm︱ 2700 kg︱ 25 cm³︱ 76,1 x 6,8 mm︱ 2”1/2 mm︱ 76,2 x 3,8 mm︱ 63,5 x 63,5 x 5,6 mm︱ 70 x 50 x 8 mm︱ 70 x 50 x 6 mm︱ 79 mm︱ 250 mm︱ 20 mm︱
          FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            121200 €
            2411.88 €
            76 mm
            5700 mm
            1100 mm
            1550 mm
            2700 kg
            25 cm³
            76,1 x 6,8 mm
            2”1/2 mm
            76,2 x 3,8 mm
            63,5 x 63,5 x 5,6 mm
            70 x 50 x 8 mm
            70 x 50 x 6 mm
            79 mm
            250 mm
            20 mm
            Description :
            FST clamping system (Patented)
            6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis),
            bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis)
            and hydraulic mandrel movement (Y3)
            Touch screen control with 3D display of the tube
            Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment
            Importing files in iges and dxf format (optional)
            Integrated Wi-Fi

            FURTHER MANDREL LENGTHS ON REQUEST


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Megabender MG 030 PT A3/H76


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1075 · Mandrel tube bending machine

          ERCOLINA - Megabender MG 030 PT A3/H76 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien35300 €︱ 716.59 €︱ 64 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 850 kg︱ 10 cm³︱ 64 x 3,3 mm︱ 2" mm︱ 60,3 x 2,2 mm︱ 60 x 60 x 2 mm︱ 40 x 60 x 4 mm︱ 60 x 40 x 3 mm︱ 76 mm︱ 200 mm︱ 20 mm︱
          with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            35300 €
            716.59 €
            64 mm
            4000 mm
            950 mm
            1250 mm
            850 kg
            10 cm³
            64 x 3,3 mm
            2" mm
            60,3 x 2,2 mm
            60 x 60 x 2 mm
            40 x 60 x 4 mm
            60 x 40 x 3 mm
            76 mm
            200 mm
            20 mm
            Description :
            with mandrel 3 m length
            FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide
            Programmable C-axis bending
            Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops
            Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu
            30 programs of 9 bends each can be memorized
            Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)
            External pressure gauges for easy setting of the system and closing pressure
            Variable bending speed up to 4 rpm (Inverter versions)
            Pneumatic chuck

            ALTERNATIVELY:
            model with mandrel length 1,5 / 4 / 6 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Topbender TB 050 PT A3/H48


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-969 · Mandrel tube bending machine

          ERCOLINA - Topbender TB 050 PT A3/H48 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien29300 €︱ 594.79 €︱ 50 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 430 kg︱ 6 cm³︱ 50 x 3,31 mm︱ Ø 1”1/4 mm︱ Ø 50 x 2,5 mm︱ 40 x 40 x 4 mm︱ 25 x 50 x 6 mm︱ 50 x 25 x 2,7 mm︱ 60 mm︱ 200 mm︱ 20 mm︱
          With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            29300 €
            594.79 €
            50 mm
            4000 mm
            950 mm
            1250 mm
            430 kg
            6 cm³
            50 x 3,31 mm
            Ø 1”1/4 mm
            Ø 50 x 2,5 mm
            40 x 40 x 4 mm
            25 x 50 x 6 mm
            50 x 25 x 2,7 mm
            60 mm
            200 mm
            20 mm
            Description :
            With mandrel 3 m length
            Can be used with or withoud mandrel
            Two bending speeds
            Programmable bend sequencing and mandrel retraction
            Independent clamp and pressure die adjustment
            Micrometer wiper die adjustment
            Auxiliary system for stabilizing the hydraulic slide pressure
            Quick tool change system
            With pneumatic material clamping and DRO system for linear and rotational positioning

            ALTERNATIVELY:
            model with mandrel 6 m length price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine MEWAG RB 60A


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3764 · Pipe-Bending Machine

          MEWAG - RB 60A - - unbekannt -

          Technical details
          tube diameter max 60 mm︱wall strength 3 mm︱bending capacity pipes 60 x 3 mm︱weight of the machine ca. 2000 kg︱dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm︱
          including a lot of accessories 6 mandrels, mandrel extension length 6000 mm and various bending tools (see photos)
            tube diameter max 60 mm
            wall strength 3 mm
            bending capacity pipes 60 x 3 mm
            weight of the machine ca. 2000 kg
            dimensions of the machine ca. ca. 8000 x 1300 x 1200 mm
            Description :
            including a lot of accessories
            6 mandrels, mandrel extension length 6000 mm
            and various bending tools (see photos)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA MB42EDTP-T


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10053 · Pipe-Bending Machine

          ERCOLINA - MB42EDTP-T - - Neu -

          Technical details
          R10-R260max. 210 °︱ 54x2 mm︱ 42x2,5 mm︱ 42x3,5 mm︱ 30 mm︱bending speed max. 4 U/min︱Amount of programms 30x9 ︱voltage dreiphasig 220-400 V︱total power requirement 1,1 kW︱dimensions of the machine ca. 1000 x 410 x 570 mm︱weight of the machine ca. 80 kg︱
          Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions)
            R10-R260
            max. 210 °
            54x2 mm
            42x2,5 mm
            42x3,5 mm
            30 mm
            bending speed max. 4 U/min
            Amount of programms 30x9
            voltage dreiphasig 220-400 V
            total power requirement 1,1 kW
            dimensions of the machine ca. 1000 x 410 x 570 mm
            weight of the machine ca. 80 kg
            Description :
            Accessories / equipment:
            - Machine structure: aluminum alloy
            - Base: welded steel
            - Standard accessories (including footswitch, operating instructions)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/2 M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040338 · Pipe-Bending Machine

          ZOPF - ZB 80/2 M - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱range L-W-H 1100x800x1500 mm︱weight 450 kg︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            range L-W-H 1100x800x1500 mm
            weight 450 kg
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - Footswitch
            - standard roller set


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/2M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10038 · Pipe-Bending Machine

          ZOPF - ZB 70/2M - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400 V︱weight 395 kg︱Overall size 900x600x1100 mm︱
          Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400 V
            weight 395 kg
            Overall size 900x600x1100 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Manual delivery of the upper roller
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            different profiles are used


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3M ECO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010097 · Pipe-Bending Machine

          ZOPF - ZB 70/3M ECO - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱connected load 400/50 V/Hz︱
          Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            connected load 400/50 V/Hz
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Manual delivery of the upper roller
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/2H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040220 · Pipe-Bending Machine

          ZOPF - ZB 70/2H - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ERCOLINA MB42 EDT-PLUS-M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010101 · Pipe-Bending Machine

          ERCOLINA - MB42 EDT-PLUS-M - - NEU -

          Technical details
          R10-R260 ︱bending speed 2,5 U/min︱ 42x3 mm︱ 42x2,5 mm︱ 30 mm︱ 54x2 mm︱total power requirement 1,5 kW︱weight of the machine ca. 80 kg︱dimensions of the machine ca. 410x1000x570 mm︱
            R10-R260
            bending speed 2,5 U/min
            42x3 mm
            42x2,5 mm
            30 mm
            54x2 mm
            total power requirement 1,5 kW
            weight of the machine ca. 80 kg
            dimensions of the machine ca. 410x1000x570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/3 H Eco


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040222 · Pipe-Bending Machine

          ZOPF - ZB 80/3 H Eco - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱weight 495 kg︱range L-W-H 1100x850x1100 mm︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            weight 495 kg
            range L-W-H 1100x850x1100 mm
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 110/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010084 · Pipe-Bending Machine

          ZOPF - ZB 110/3H - - Neu -

          Technical details
          80 mm︱roll diameter 260 mm︱ 7 U/min︱ 170 mm︱ 27 kN︱ 160 mm︱ 450 mm︱total power requirement 3,7 kW︱dimensions 980x1430x1600 mm︱weight 1380 kg︱
          Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc.
            80 mm
            roll diameter 260 mm
            7 U/min
            170 mm
            27 kN
            160 mm
            450 mm
            total power requirement 3,7 kW
            dimensions 980x1430x1600 mm
            weight 1380 kg
            Description :
            Accessories / equipment:
            - Three driven rollers with a smooth surface
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can bend
            different profiles are used e.g. Flat iron, T-iron, solid material
            etc.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3H ECO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040180 · Pipe-Bending Machine

          ZOPF - ZB 70/3H ECO - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 70/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010098 · Pipe-Bending Machine

          ZOPF - ZB 70/3H - - Neu -

          Technical details
          40 mm︱ 8,5 U/min︱ 120 mm︱roll diameter 152 / 162 mm︱engine output 1,1 kW︱connected load 400/50 V/Hz︱hydraulic pump 1,1 kW︱ 80 kN︱range L-W-H 900 x 600 x 1000 mm︱weight 470 kg︱
          Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles
            40 mm
            8,5 U/min
            120 mm
            roll diameter 152 / 162 mm
            engine output 1,1 kW
            connected load 400/50 V/Hz
            hydraulic pump 1,1 kW
            80 kN
            range L-W-H 900 x 600 x 1000 mm
            weight 470 kg
            Description :
            Equipment / Accessories:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            used different profiles


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 100/3H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040225 · Pipe-Bending Machine

          ZOPF - ZB 100/3H - - Neu -

          Technical details
          shaft diameter 60 mm︱Shaft revolutions 6 U/min︱roll diameter 215 mm︱pressure hydraulic cylinder 180 kN︱dimensions 1125x870x1620 mm︱weight 820 kg︱
          Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.
            shaft diameter 60 mm
            Shaft revolutions 6 U/min
            roll diameter 215 mm
            pressure hydraulic cylinder 180 kN
            dimensions 1125x870x1620 mm
            weight 820 kg
            Description :
            Accessories / Equipment:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 100/2H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040255 · Pipe-Bending Machine

          ZOPF - ZB 100/2H - - Neu -

          Technical details
          roll diameter 215 mm︱shaft diameter 60 mm︱Shaft revolutions 6 U/min︱ 100x2 mm︱ 80x15 mm︱pressure hydraulic cylinder 180 kN︱total power requirement 2,2 kW︱weight 720 kg︱dimensions 1200x900x1700 mm︱
          Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.
            roll diameter 215 mm
            shaft diameter 60 mm
            Shaft revolutions 6 U/min
            100x2 mm
            80x15 mm
            pressure hydraulic cylinder 180 kN
            total power requirement 2,2 kW
            weight 720 kg
            dimensions 1200x900x1700 mm
            Description :
            Accessories / Equipment:
            - Three driven rollers
            - Hydraulic delivery of the upper roller
            - Working position horizontal and vertical
            - Digital display with memory function
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine AK-BEND APK 50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010071 · Pipe-Bending Machine

          AK-BEND - APK 50 - - Neu -

          Technical details
          round material 40 mm︱tube diameter 70x2 mm︱square material 80x30x3 mm︱L-beam 50 x 5 mm︱I - beam section - flat steel 80 x 16 mm︱I-beam section - upend 50 x 15 mm︱roll diameter 157 mm︱Shaft diameter 50 mm︱bending speed 2,95 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1000x950x1450 mm︱
          Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German
            round material 40 mm
            tube diameter 70x2 mm
            square material 80x30x3 mm
            L-beam 50 x 5 mm
            I - beam section - flat steel 80 x 16 mm
            I-beam section - upend 50 x 15 mm
            roll diameter 157 mm
            Shaft diameter 50 mm
            bending speed 2,95 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1000x950x1450 mm
            Description :
            Domestic equipments:
            - Special steel shafts (42CrMo4) hardened and ground
            - a set of standard rollers
            - lower rollers up and down hydraulically deliverable
            - digital display for lower rollers
            - separate control panel
            - in one direction manually adjustable lateral straightening rollers
            - manual lubrication
            - horizontal and vertical operation
            - CE mark / Declaration of Conformity
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 60 M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10010 · Pipe-Bending Machine

          ZOPF - ZB 60 M - - Neu -

          Technical details
          95 mm︱Shaft diameter 30 mm︱Shaft revolutions 7 U/min︱roll diameter 132 mm︱Drive 0,75 kW︱weight 220 kg︱range L-W-H 530x900x660 mm︱
          Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.
            95 mm
            Shaft diameter 30 mm
            Shaft revolutions 7 U/min
            roll diameter 132 mm
            Drive 0,75 kW
            weight 220 kg
            range L-W-H 530x900x660 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers with grooved surface
            - Manual feed of the upper roller
            - working position horizontal and vertical (with tilting base)
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - The standard roller set is included. He can turn
            different profiles are used e.g. Flat iron, T-iron, solid material
            etc.


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine ZOPF ZB 80/2 H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9010085 · Pipe-Bending Machine

          ZOPF - ZB 80/2 H - - Neu -

          Technical details
          50 mm︱ 8,5 U/min︱ 100 kN︱roll diameter 162 mm︱Drive 1,5 kW︱weight 495 kg︱range L-W-H 1100x850x1350 mm︱
          Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set
            50 mm
            8,5 U/min
            100 kN
            roll diameter 162 mm
            Drive 1,5 kW
            weight 495 kg
            range L-W-H 1100x850x1350 mm
            Description :
            Equipment / Accessories:
            - Two driven rollers
            - Hydraulic delivery of the upper roller
            - Digital display with memory function
            - Working position horizontal and vertical
            - Bearings with tapered roller bearings
            - Use of replaceable slide rails on the guide carriage
            - Footswitch
            - standard roller set


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          ERCOLINA - SCHWARZE-WIRTZ - TRANSFLUID -