,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2606


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011154 · Plate Shear - Hydraulic

          BAYKAL - HGL 2606 - - NEU -

          Technical details
          sheet width 2560 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 15 Stück︱engine output 11 kW︱machine weight ab. 4670 kg︱dimensions 3350 x 2800 x 1550 mm︱
            sheet width 2560 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 15 Stück
            engine output 11 kW
            machine weight ab. 4670 kg
            dimensions 3350 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2106 - - NEU -

          Technical details
          sheet width 2060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 13 Stück︱engine output 11 kW︱machine weight ab. 3850 kg︱dimensions 2850 x 2800 x 1550 mm︱
            sheet width 2060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 13 Stück
            engine output 11 kW
            machine weight ab. 3850 kg
            dimensions 2850 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 4106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011156 · Plate Shear - Hydraulic

          BAYKAL - HGL 4106 - - NEU -

          Technical details
          sheet width 4060 mm︱plate thickness 6 mm︱System pressure 200 kg/cm2︱down holder 23 Stück︱engine output 11 kW︱machine weight ab. 9400 kg︱dimensions 4940 x 2750 x 1560 mm︱
            sheet width 4060 mm
            plate thickness 6 mm
            System pressure 200 kg/cm2
            down holder 23 Stück
            engine output 11 kW
            machine weight ab. 9400 kg
            dimensions 4940 x 2750 x 1560 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 4110


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011184 · Plate Shear - Hydraulic

          BAYKAL - MGH 4110 - - NEU -

          Technical details
          sheet width 4100 mm︱plate thickness 10 mm︱cutting angle 2 °︱ 10 ︱rear stop 5 - 1000 mm︱hydr. holding down 23 ︱oil volume 170 l︱total power requirement 22 kW︱machine weight ab. 13.000 kg︱dimensions 4900 x 2800 x 1900 mm︱
            sheet width 4100 mm
            plate thickness 10 mm
            cutting angle 2 °
            10
            rear stop 5 - 1000 mm
            hydr. holding down 23
            oil volume 170 l
            total power requirement 22 kW
            machine weight ab. 13.000 kg
            dimensions 4900 x 2800 x 1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3006


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325325 · Plate Shear - Hydraulic

          BAYKAL - HGL 3006 - - 2005 - DAC 310

          Technical details
          sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱
          Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325
            sheet width 3060 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control DAC 310
            total power requirement 11.0 kW
            weight 5450 kg
            range L-W-H 3800 x 1940 x 1560 mm
            Description :
            Furnishing:
            - electro-hydraulic swing cutting shears including sheet metal holding device
            - DELEM CNC control unit, model “DAC 310”
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Speed 100 mm/sec
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - electro-motoric cutting gap adjustment
            - Tip operation with push buttons on the control panel on the left
            - front support plates with ball rollers
            - front finger/intervention protection
            - 1x side stop with T-slot & millimeter scale
            - 3x front support arms
            - original operating instructions including CE declaration

            ** Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts
            - electro-motoric cutting gap adjustment

            Machinelink:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3006


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94160 · Plate Shear - Hydraulic

          BAYKAL - HGL 3006 - - 2005 - DAC 310

          Technical details
          sheet width 3060 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱
          Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment
            sheet width 3060 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control DAC 310
            total power requirement 11.0 kW
            weight 5450 kg
            range L-W-H 3800 x 1940 x 1560 mm
            Description :
            Furnishing:
            - electro-hydraulic swing cutting shears including sheet metal holding device
            - DELEM CNC control unit, model “DAC 310”
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Speed 100 mm/sec
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - electro-motoric cutting gap adjustment
            - Tip operation with push buttons on the control panel on the left
            - front support plates with ball rollers
            - front finger/intervention protection
            - 1x side stop with T-slot & millimeter scale
            - 3x front support arms
            - original operating instructions including CE declaration

            ** Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts
            - electro-motoric cutting gap adjustment




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3100 x 8


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325329 · Plate Shear - Hydraulic

          BAYKAL - HGL 3100 x 8 - - 2002 -

          Technical details
          sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱
          ** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329
            sheet width 3060 mm
            plate thickness 8.0 mm
            thickness at "Niro-steel" 6.0 mm
            distance between columns 3100 mm
            down holder 16 Stück
            no. of strokes 10 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Number of working hours ca. 2.100 h
            back stop - adjustable 6.0 - 750 mm
            total power requirement 18.5 kW
            weight 6300 kg
            range L-W-H 3900 x 2300 x 1630 mm
            Description :
            ** from a maintenance workshop
            ** hardly used - only approx. 2.100 operating hours (!!)
            ** New price approx. 40.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic swing cutting shears
            - ELGO digital display model P9521, for electric back gauge
            * Travel distance back gauge X = 750 mm
            * Backlash-free ball screw for back gauge
            * Back gauge beam can be automatically tilted up to maximum position
            * for pushing extra long sheets through
            * Travel speed 100 mm/sec
            - 1x stable side stop
            * with T-slot, flip stop and millimeter scale
            - 2x front, stable support arms
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - manual cutting gap adjustment
            * Can be operated centrally on the right side stand
            - front support plates with ball rollers
            - front finger/intervention protection
            - Tip operation with push buttons on the control panel on the left
            - Protective grille = safety device behind the machine
            - original operating instructions including CE declaration

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3100-8


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011136 · Plate Shear - Hydraulic

          BAYKAL - HGL 3100-8 - - 2001 -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱rear stop 1000 mm︱weight of the machine ca. 7000 kg︱
            sheet width 3060 mm
            plate thickness 8 mm
            rear stop 1000 mm
            weight of the machine ca. 7000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 3100/10


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94145 · Plate Shear - Hydraulic

          BAYKAL - MGH 3100/10 - - 1998 - ELGO

          Technical details
          sheet width 3060 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱
          Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)
            sheet width 3060 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            back stop - adjustable 5,0 - 1000 mm
            work height max. ca. 820 mm
            cutting angle 2,4 °
            stroke 7-12 p/min.
            down holder 14 Stück
            operating pressure 360 bar
            Control ELGO
            oil volume 200 ltr.
            voltage 400 V
            total power requirement 22,0 kW
            weight 9000 kg
            range L-W-H 4000 x 2300 x 2000 mm
            Description :
            Furnishing :
            - robust / hydraulic swing shears
            - with ELGO digital control
            - electric backgauge 5.0 - 1,000 mm
            * zero-backlash ball screw for backgauge
            * Backstop beam can be automatically tilted up in max. position
            * Speed 100mm/sec
            - 1x side stop
            - 2x front support arms
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - manual cutting gap adjustment
            * centrally operated on the right side stand
            - Machine side stand with overhang
            - Front support plates with ball rollers
            - front finger protection
            - Tip operation with push buttons on the control panel
            - free-moving footswitch
            - User manual (PDF)


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 3100/10


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325287 · Plate Shear - Hydraulic

          BAYKAL - MGH 3100/10 - - 1998 - ELGO

          Technical details
          sheet width 3060 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱
          Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)
            sheet width 3060 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            back stop - adjustable 5,0 - 1000 mm
            work height max. ca. 820 mm
            cutting angle 2,4 °
            stroke 7-12 p/min.
            down holder 14 Stück
            operating pressure 360 bar
            Control ELGO
            oil volume 200 ltr.
            voltage 400 V
            total power requirement 22,0 kW
            weight 9000 kg
            range L-W-H 4000 x 2300 x 2000 mm
            Description :
            Furnishing :
            - robust / hydraulic swing shears
            - with ELGO digital control
            - electric backgauge 5.0 - 1,000 mm
            * zero-backlash ball screw for backgauge
            * Backstop beam can be automatically tilted up in max. position
            * Speed 100mm/sec
            - 1x side stop
            - 2x front support arms
            - electrical cutting length limitation
            * Cutting length limitation to increase the number of strokes/min.
            - manual cutting gap adjustment
            * centrally operated on the right side stand
            - Machine side stand with overhang
            - Front support plates with ball rollers
            - front finger protection
            - Tip operation with push buttons on the control panel
            - free-moving footswitch
            - User manual (PDF)


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2600/6


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325326 · Plate Shear - Hydraulic

          BAYKAL - HGL 2600/6 - - 1994 - ELGO TYP 71

          Technical details
          sheet width 2560 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 2600 mm︱down holder 12 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control ELGO TYP 71 ︱back stop - adjustable max. 750 mm︱total power requirement 11.37 kW︱weight 3800 kg︱range L-W-H 3030 x 1910 x 1510 mm︱
          ** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326
            sheet width 2560 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            distance between columns 2600 mm
            down holder 12 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control ELGO TYP 71
            back stop - adjustable max. 750 mm
            total power requirement 11.37 kW
            weight 3800 kg
            range L-W-H 3030 x 1910 x 1510 mm
            Description :
            ** Current new price approx. 37.000 euros
            ** Special price on request

            Furnishing:
            - Robust electric hydraulic swing cutter
            - Elgo type 71 digital control unit
            * Driving back stop x = 750 mm
            * play -free ball circuit spindle for back attack
            * Speed 100 mm/sec
            - 1x side stop
            * with a t-groove, flip stop and millimeter scale
            - 2x front reversing arms
            - Electrical cutting length limit
            * Cutting length limitation to increase the number of lifts/min.
            - Manual interpretation
            - front finger/intervention protection
            - TIP operation with push buttons on the switch on the left
            - original operating instructions

            * Machinelink:
            https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2600/6


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2600/6 - - 1994 - ELGO TYP 71

          Technical details
          sheet width 2560 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 2600 mm︱down holder 12 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control ELGO TYP 71 ︱back stop - adjustable max. 750 mm︱total power requirement 11.37 kW︱weight 3800 kg︱range L-W-H 3030 x 1910 x 1510 mm︱
          ** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions
            sheet width 2560 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            distance between columns 2600 mm
            down holder 12 Stück
            no. of strokes 20 Hub/min
            oil volume 160 ltr.
            cutting angle 1.6 °
            Control ELGO TYP 71
            back stop - adjustable max. 750 mm
            total power requirement 11.37 kW
            weight 3800 kg
            range L-W-H 3030 x 1910 x 1510 mm
            Description :
            ** Current new price approx. 37.000 euros
            ** Special price on request

            Furnishing:
            - Robust electric hydraulic swing cutter
            - Elgo type 71 digital control unit
            * Driving back stop x = 750 mm
            * play -free ball circuit spindle for back attack
            * Speed 100 mm/sec
            - 1x side stop
            * with a t-groove, flip stop and millimeter scale
            - 2x front reversing arms
            - Electrical cutting length limit
            * Cutting length limitation to increase the number of lifts/min.
            - Manual interpretation
            - front finger/intervention protection
            - TIP operation with push buttons on the switch on the left
            - original operating instructions



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.