,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Plate Bending Machine - 3 Rolls

          Machinelist: Plate Bending Machine - 3 Rolls


          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8264-10/35


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08086 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8264-10/35 - - Fabrikneu / new -

          Technical details
          sheet width 1020 mm︱plate thickness 3,5 mm︱roll diameter 90 mm︱total power requirement 0,75 kW︱weight of the machine ca. 310 kg︱Electric 380 Volt ︱Foot switch
          Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 3,5 mm
            roll diameter 90 mm
            total power requirement 0,75 kW
            weight of the machine ca. 310 kg
            Description :
            Symmetry roll arrangement.
            This machine is in the following sizes obtainable:
            worhing length from 1020 until 2520 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 8 mm.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8266-12/50


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08089 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8266-12/50 - - Fabrikneu / new -

          Technical details
          sheet width 1290 mm︱plate thickness 5 mm︱pre-bending ja ︱roll diameter 120 mm︱roll speed 1 - 6 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 825 kg︱
          Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².
            sheet width 1290 mm
            plate thickness 5 mm
            pre-bending ja
            roll diameter 120 mm
            roll speed 1 - 6 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 825 kg
            Description :
            Asymmetry roll arrangement, pre-bending ist possible.
            This new machine is in the following sizes obtainable:
            working length from 1040 until 2540 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm.
            We are distributor only for Germany.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8266-12/60


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08093 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8266-12/60 - - Fabrikneu / new -

          Technical details
          sheet width 1290 mm︱plate thickness 6 mm︱pre-bending ja ︱roll diameter 140 mm︱roll speed 1 - 6 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1120 kg︱
          Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².
            sheet width 1290 mm
            plate thickness 6 mm
            pre-bending ja
            roll diameter 140 mm
            roll speed 1 - 6 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1120 kg
            Description :
            Asymmetry roll arrangement, pre-bending ist possible.
            This new machine is in the following sizes obtainable:
            working length from 1040 until 2540 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm.
            We are distributor only for Germany.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FACCIN ASI/M 2,15 x 30 - Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12339 · Plate Bending Machine - 3 Rolls

          FACCIN - ASI/M 2,15 x 30 - Digi - - 1996 -

          Technical details
          sheet width 2100 mm︱plate thickness 3,5 mm︱pre-bending 2,5 mm︱roll diameter 130 mm︱roll speed 4 m/min︱total power requirement 3,8 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 2,9 x 0,62 x 1,1 m︱Electric 380 Volt ︱Induction hardened rollers fuer VA ︱Profile bending device ︱Digital readout ︱Emergency wire switch ︱Foot switch 4 Funktionen ︱CE signed ︱Condition: ready for operation ︱Video(s) available on our website.
          Motorized three-roll bending machine with an asymmetrical roll arrangement. - Special version with 2100 mm roller length - Both central rollers driven - per bend - Top roller can be swung out - Inductively hardened rollers for VA processing, roller surfaces top! - Side rollers on roller bearings - extended rollers for profile bending rings - Digital display for the rear roller infeed - Safety control with immediate stop of all machine movements. Faccin is a renowned manufacturer of quality machines. The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by Owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m
            sheet width 2100 mm
            plate thickness 3,5 mm
            pre-bending 2,5 mm
            roll diameter 130 mm
            roll speed 4 m/min
            total power requirement 3,8 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 2,9 x 0,62 x 1,1 m
            Induction hardened rollers fuer VA
            Foot switch 4 Funktionen
            Description :
            Motorized three-roll bending machine with an asymmetrical roll arrangement.
            - Special version with 2100 mm roller length
            - Both central rollers driven
            - per bend
            - Top roller can be swung out
            - Inductively hardened rollers for VA processing, roller surfaces top!
            - Side rollers on roller bearings
            - extended rollers for profile bending rings
            - Digital display for the rear roller infeed
            - Safety control with immediate stop of all machine movements.
            Faccin is a renowned manufacturer of quality machines.
            The machine was used in a well-kept small business for the production of
            stainless steel special parts are used for kitchens, laboratories and clinics
            and were only used by Owner served.
            The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls FASTI 102/RM Gr. 1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12341 · Plate Bending Machine - 3 Rolls

          FASTI - 102/RM Gr. 1 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 1,25 mm︱pre-bending 1 mm︱roll diameter 55 mm︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 1,5 x 0,5 m︱
          Manual plate bending machine with asymmetrical roller arrangement, rollers made of material 70 kg/mm² strength, adjustment of the lower rollers with eccentric infeed, rear roller with handwheel infinitely adjustable via worm gear, rear roller inclination for conical rounds, folding groove at the top and wire insert grooves at the bottom. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 1,25 mm
            pre-bending 1 mm
            roll diameter 55 mm
            weight of the machine ca. 180 kg
            dimensions of the machine ca. 1,5 x 0,5 m
            Description :
            Manual plate bending machine with asymmetrical roller arrangement, rollers made
            of material 70 kg/mm² strength, adjustment of the lower rollers with eccentric
            infeed, rear roller with handwheel infinitely adjustable via worm gear, rear
            roller inclination for conical rounds, folding groove at the top and wire
            insert grooves at the bottom.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls unbekannt/unknown RM 110


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12322 · Plate Bending Machine - 3 Rolls

          unbekannt/unknown - RM 110 - - -

          Technical details
          sheet width 1620 mm︱plate thickness 3 (4) mm︱pre-bending nein/no ︱roll diam. toproll 110 mm︱roll diam. bottom roll 100 mm︱plate thickness großer DM = 4 mm︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 2,2 x 0,7 x 1,2 m︱
          Manual 3-roller round bending machine in a symmetrical roller arrangement, with 2 adjustment spindles on the right and left for the top roller, hand crank for right and left movement of the rollers, foldable roller bearing for removing the tubes. The sheet thickness refers to 380 N/mm² strength. The bending performance could also go up to 4 mm because the top roller has a diameter of 110 mm. Machine dealer with own stock of 1600 m²
            sheet width 1620 mm
            plate thickness 3 (4) mm
            pre-bending nein/no
            roll diam. toproll 110 mm
            roll diam. bottom roll 100 mm
            plate thickness großer DM = 4 mm
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 2,2 x 0,7 x 1,2 m
            Description :
            Manual 3-roller round bending machine in a symmetrical roller arrangement, with
            2 adjustment spindles on the right and left for the top roller, hand crank for
            right and left movement of the rollers, foldable roller bearing for removing
            the tubes.
            The sheet thickness refers to 380 N/mm² strength. The bending performance could
            also go up to 4 mm because the top roller has a diameter of 110 mm.
            Machine dealer with own stock of 1600 m²


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls RAS 41.20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12336 · Plate Bending Machine - 3 Rolls

          RAS - 41.20 - - -

          Technical details
          sheet width 1250 mm︱plate thickness 1 mm︱pre-bending - ︱shaft diameter 56 mm︱weight of the machine ca. 170 kg︱dimensions of the machine ca. 1,5 x 0,55 x 1 m︱
          Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m².
            sheet width 1250 mm
            plate thickness 1 mm
            pre-bending -
            shaft diameter 56 mm
            weight of the machine ca. 170 kg
            dimensions of the machine ca. 1,5 x 0,55 x 1 m
            Description :
            Manual 3-roller round bending machine with asymmetrical roller arrangement
            operated with hand crank via wheel transmission, upper roller can be swung out,
            lower rollers with annular groove, rear shaft adjustable for conical bending,
            front shaft adjusted via eccentric lever, rear roller adjusted via adjusting
            lever, rollers crowned.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls RAS 40.91 fuer Falzrohre


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12329 · Plate Bending Machine - 3 Rolls

          RAS - 40.91 fuer Falzrohre - - -

          Technical details
          sheet width 1500 mm︱plate thickness 1,25 mm︱pre-bending - ︱total power requirement 0,75 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 2 x 0,6 x 1 m︱Electric 380 Volt ︱Foot switch
          Special round bending machine for air duct construction for rounding profiled sheets with folds such as corner folds, snap folds and standing folds (max height 13 mm). It is possible to round the inner and outer casings of the duct bends and air baffles that are folded on both sides. The previously required filling sheets for the different types of folds are no longer necessary. It's all three reels driven by a geared motor with re- and li-running using a foot switch. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 1500 mm
            plate thickness 1,25 mm
            pre-bending -
            total power requirement 0,75 kW
            weight of the machine ca. 460 kg
            dimensions of the machine ca. 2 x 0,6 x 1 m
            Description :
            Special round bending machine for air duct construction for rounding profiled
            sheets with folds such as corner folds, snap folds and standing folds (max
            height 13 mm). It is possible to round the inner and outer casings of the duct
            bends and air baffles that are folded on both sides. The previously required
            filling sheets for
            the different types of folds are no longer necessary. It's all three reels
            driven by a geared motor with re- and li-running using a foot switch.
            The bending performance refers to 400 N/mm² strength.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find a 3-roll bending machine for your business needs
          Discover the versatility of a 3-roll bending machine

          Roll benders employ rollers situated on a jig to form curves and arcs in a variety of metals. The process is critical to metalworking for a wide variety of industries. A 3-roll bending machine is one of the most commonly used pieces of equipment for plate bending if you're looking for your next 3-roll bending machine check out the huge selection available at LagerMaschinen. You're sure to find just the used machine to suit both your business and your budget.

          A 3-roll bending machine is crucial to your metalworking business

          There are a wide variety of custom metalworking tools available on the market today. Even within a specific category industry professionals have a lot of choices available to them. For example a 3-roll bending machine can encompass a range of different sizes and speeds. It may operate vertically or horizontally and be manually or electronically controlled. No matter what your needs are when shopping for your next 3-roll bending machine you can find quality used machinery at LagerMaschinen.

          Buying used machinery gives you the most bang for you buck

          If you're looking to make the most of your time and money consider shopping for used machinery online. LagerMaschinen is your leading source for the best selection of machines like a 3-roll bending machine. The easy-to-use interface makes shopping for equipment for your business a breeze. Shop from the comfort of your home or office search by price or location and enjoy the hassle-free shopping experience that LagerMaschinen can provide!


          Your next 3-roll plate bending machine from LagerMaschinen
          Find the best 3-roll plate bending machine for your needs

          Roll bending is a process used in the manufacturing of ductile materials like sheet metal. This process creates rounded shapes by passing materials repeatedly through a series of rollers in order to create uniform curvature with minimal damage to the surface of the materials. A 3-roll plate bending machine is ideal for creating arched shapes in sheet metal and other materials. If you're shopping for a 3-roll plate bending machine check out the variety of used machines available at LagerMaschinen.

          The advantages of roll bending are numerous

          Roll bending is one of the favoured methods for the creation of curves in sheet metal. As the process is relatively simple it doesn't require a large amount of manpower or constant supervision to complete. When you invest in a 3-roll plate bending machine you can rest assured that the end product will be durable and the cost to you and your company will be minimal. Find your next 3-roll plate bending machine at LagerMaschinen.

          Convenience meets quality at LagerMaschinen

          Investing in industrial metalworking machinery such as a 3-roll plate bending machine can be a daunting and sometimes stressful process. LagerMaschinen aims to take all the hassle out of shopping for your business by offering you a user-friendly site that lets you browse used equipment by price model or location. You can quickly and easily find the perfect used machinery for your needs from the comfort of your home or office using LagerMaschinen.