,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Coil Line

          used Sheet metal working / shaeres / bending Coil Line ARKU AH 3000/2/250/ST / RM 3025.4/2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60174 · Coil Line

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -

          Technical details
          sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 3,80 mm︱ 470 - 530 mm︱ 2130 mm︱ 418,0 kW︱speed 20 m/min︱power capacity 18 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
            sheet width 0250 mm
            coil outside dia. 1800 mm
            weight max. in kg 2 x 3000 kg
            3,80 mm
            470 - 530 mm
            21
            30 mm
            4
            18,0 kW
            speed 20 m/min
            power capacity 18 kW
            Description :
            Decoiler AH 3000/2/250/ST
            with continuously variable drive, hydraulic central spread,
            Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,

            Straightening machine RM 3025.4/21
            with continuously variable drive, driven straightening rollers, manual
            Roller mill adjustment, quick-change device for the straightening rollers
            Belt loop control via ultrasound
            Material thickness / with material width 3.80 / 250 mm
            Material thickness / with material width 6.00 / 100 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Coiler

          used Sheet metal working / shaeres / bending Coiler ARKU AH500 / 2 / FU


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0425 · Coiler

          ARKU - AH500 / 2 / FU - - 1993 -

          Technical details
          Coil weight 2 x 500 kg︱Material width 300 mm︱Coil exterior diameter 1200 mm︱Expansion range 350 - 610 mm︱Weight of machine approx. 2,2 t︱
            Coil weight 2 x 500 kg
            Material width 300 mm
            Coil exterior diameter 1200 mm
            Expansion range 350 - 610 mm
            Weight of machine approx. 2,2 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          decoiler straightening machine

          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU AH 3000/2/250/ST / RM 3025.4/2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233015A · decoiler straightening machine

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 - konventionell

          Technical details
          material width 250 mm︱coil weight 2 x 3,0 t︱material thickness 1,5 - 6,0 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1800 mm︱material cross-cut 6,0 bei BB100 / 3,8mm bei mm²︱no. of straightening rolls 21 ︱straightening roll diameter 30 mm︱number of draw-in rolls 4 ︱speed - 20 m/min︱power requirement 18,0 kW︱Weight 4,2 t︱Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m︱Weight 2,40 kg︱dimensions (WxDxH) 2,0 x 2,1 x 2,2 m︱
          Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic
            material width 250 mm
            coil weight 2 x 3,0 t
            material thickness 1,5 - 6,0 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1800 mm
            material cross-cut 6,0 bei BB100 / 3,8mm bei mm²
            no. of straightening rolls 21
            straightening roll diameter 30 mm
            number of draw-in rolls 4
            speed - 20 m/min
            power requirement 18,0 kW
            Weight 4,2 t
            Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m
            Weight 2,40 kg
            dimensions (WxDxH) 2,0 x 2,1 x 2,2 m
            Description :
            Decoiler AH 3000/2/250/ST
            with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting
            Straightening machine RM 3025.4/21
            with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls
            coil loop control via ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU RM 5050.4/9  /  AH 2000/2/M


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123056 · decoiler straightening machine

          ARKU - RM 5050.4/9 / AH 2000/2/M - - 1986 - konventionell

          Technical details
          material width 500 mm︱coil weight 2 x 2,0 t︱material thickness 1,0 - 6,0 mm︱coil internal diameter 350 - 420 mm︱coil external diameter 1600 mm︱no. of straightening rolls 9 ︱straightening roll diameter 50 mm︱number of draw-in rolls 2 ︱speed 0 - 40 m/min︱material thickness at 500 mm material width 3,5 mm︱power requirement 17,5 kW︱Weight t︱Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m︱
          - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls - Double decoiler AH 2000/2/M with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm machine is in running function in our warehouse
            material width 500 mm
            coil weight 2 x 2,0 t
            material thickness 1,0 - 6,0 mm
            coil internal diameter 350 - 420 mm
            coil external diameter 1600 mm
            no. of straightening rolls 9
            straightening roll diameter 50 mm
            number of draw-in rolls 2
            speed 0 - 40 m/min
            material thickness at 500 mm mat. 3,5 mm
            power requirement 17,5 kW
            Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m
            Description :
            - Straightening machine RM 5050.4/9
            with infinitely variable drive, supporting rolls
            - Double decoiler AH 2000/2/M
            with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm
            machine is in running function in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Decoilers for Coils

          used Sheet metal working / shaeres / bending Decoilers for Coils ARKU AH 3000-400-MSG-4Q


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7781 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          sheet width - max. 0600 mm︱coil weight 3,00 t︱coil internal dia. 465 - 530 mm︱total power requirement kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2,72 x 1,70 x 2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            sheet width - max. 0600 mm
            coil weight 3,00 t
            coil internal dia. 465 - 530 mm
            weight of the machine ca. 2,45 t
            dimensions of the machine ca. 2,72 x 1,70 x 2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left
            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable
            hydraulic unit not available


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils ARKU AH 3000-400-MSG-4Q


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01090 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          coil weight 3,00 t︱material width 600 mm︱coil internal dia. 465-530 mm︱machine weight app. 2,45 t︱required space app. 2,72x1,70x2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            coil weight 3,00 t
            material width 600 mm
            coil internal dia. 465-530 mm
            machine weight app. 2,45 t
            required space app. 2,72x1,70x2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left

            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable

            hydraulic unit not available


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact

          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller ARKU GBR 9.250.30


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073144 · Roller leveller

          ARKU - GBR 9.250.30 - - 1982 - konventionell

          Technical details
          material width 250 mm︱material thickness 0,4 - 3,5 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱speed 3 - 15 m/min︱material thickness at 250 mm material width 3,0 mm︱material thickness at 200 mm material width 3,5 mm︱power capacity 1,8 kW︱weight 0,9 t︱Dimensions (WxDxH) 1,45 x 1,4 x 1,55 m︱
          with infinitely variable drive material thickness 3,0 mm at material width 250 mm material thickness 3,5 mm at material width 200 mm
            material width 250 mm
            material thickness 0,4 - 3,5 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            speed 3 - 15 m/min
            material thickness at 250 mm mat. 3,0 mm
            material thickness at 200 mm mat. 3,5 mm
            power capacity 1,8 kW
            weight 0,9 t
            Dimensions (WxDxH) 1,45 x 1,4 x 1,55 m
            Description :
            with infinitely variable drive
            material thickness 3,0 mm at material width 250 mm
            material thickness 3,5 mm at material width 200 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.