,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          screw press

          Machinelist: screw press


          screw press

          used Presses screw press SCHULER PFsch 125


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073185 · screw press

          SCHULER - PFsch 125 - - ? - konventionell

          Technical details
          nominal force 100 t︱stroke 320 mm︱no. of strokes 35 /min︱distance between columns 360 / 250 mm︱Distance table/ram, max. stroke up, adjustment up 500 mm︱table surface area 320 x 450 mm︱table height over floor 660 mm︱ram surface 250 x 280 mm︱spindle diameter 125 mm︱power capacity 3,0 kW︱weight 4,5 t︱Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) can only be offered without putting into operation, in given condition
            nominal force 100 t
            stroke 320 mm
            no. of strokes 35 /min
            distance between columns 360 / 250 mm
            Distance table/ram, max. stroke . 500 mm
            table surface area 320 x 450 mm
            table height over floor 660 mm
            ram surface 250 x 280 mm
            spindle diameter 125 mm
            power capacity 3,0 kW
            weight 4,5 t
            Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            can only be offered without putting into operation, in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press MÜLLER - WEINGARTEN PA 140


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0432 · screw press

          MÜLLER - WEINGARTEN - PA 140 - - 2000 -

          Technical details
          Screw diameter 140 mm︱Stroke 190 - 320 mm︱Number of strokes 30 min-1︱Daylight 350 mm︱Table surface area 600 x 550 mm︱Free frontal opening L-R 610 mm︱Free lateral opening F-B 510 mm︱Required power 22 kW︱Height over floor approx. 3650 mm︱Dimensions L x W x H 1400 x 1200 x 3650 mm︱Weight of machine approx. 6,5 t︱
            Screw diameter 140 mm
            Stroke 190 - 320 mm
            Number of strokes 30 min-1
            Daylight 350 mm
            Table surface area 600 x 550 mm
            Free frontal opening L-R 610 mm
            Free lateral opening F-B 510 mm
            Required power 22 kW
            Height over floor approx. 3650 mm
            Dimensions L x W x H 1400 x 1200 x 3650 mm
            Weight of machine approx. 6,5 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press WEINGARTEN PA 140


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233033 · screw press

          WEINGARTEN - PA 140 - - 2000 - konventionell

          Technical details
          nominal force 200 t︱stroke 190 - 320 mm︱no. of strokes 30 /min︱distance between columns 610 / 510 mm︱distance table/ram, max. stroke up, adjustment up 670 mm︱table surface area 500 x 530 mm︱blow die to die 400 t︱Allowed max. force 320 t︱ram surface 500 x 530 mm︱spindle diameter 140 mm︱power capacity 22,0 kW︱weight 6,20 t︱Dimensions (WxDxH) 1,4 x 1,2 x 3,65 m︱
          permitted for hot and cold forming according to the EU manufacturer's declaration with direct drive, single impact / double impact device, impact regulation, two-hand and foot operation
            nominal force 200 t
            stroke 190 - 320 mm
            no. of strokes 30 /min
            distance between columns 610 / 510 mm
            distance table/ram, max. stroke . 670 mm
            table surface area 500 x 530 mm
            blow die to die 400 t
            Allowed max. force 320 t
            ram surface 500 x 530 mm
            spindle diameter 140 mm
            power capacity 22,0 kW
            weight 6,20 t
            Dimensions (WxDxH) 1,4 x 1,2 x 3,65 m
            Description :
            permitted for hot and cold forming according to the EU manufacturer's declaration
            with direct drive, single impact / double impact device, impact regulation, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press MÜLLER - WEINGARTEN PA 140


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0431 · screw press

          MÜLLER - WEINGARTEN - PA 140 - - 2000 -

          Technical details
          Screw diameter 140 mm︱Stroke 190 - 320 mm︱Number of strokes 30 min-1︱Daylight 350 mm︱Table surface area 600 x 550 mm︱Free frontal opening L-R 610 mm︱Free lateral opening F-B 510 mm︱Required power 22 kW︱Height over floor approx. 3650 mm︱Dimensions L x W x H 1400 x 1200 x 3650 mm︱Weight of machine approx. 6,2 t︱
            Screw diameter 140 mm
            Stroke 190 - 320 mm
            Number of strokes 30 min-1
            Daylight 350 mm
            Table surface area 600 x 550 mm
            Free frontal opening L-R 610 mm
            Free lateral opening F-B 510 mm
            Required power 22 kW
            Height over floor approx. 3650 mm
            Dimensions L x W x H 1400 x 1200 x 3650 mm
            Weight of machine approx. 6,2 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press Metal WAG YB-3


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-926 · screw press

          Metal WAG - YB-3 - - 1981 -

          Technical details
          pressure 20 t︱Stroke 280 mm︱table surface area 60 mm︱spindle diameter 340 x 320 mm︱distance between columns 380 mm︱Dimensions (HxWxD) 1,90x1,20x1,20 mm︱weight 425 kg︱
          used screw spindle press - hand wheel foldable
            pressure 20 t
            Stroke 280 mm
            table surface area 60 mm
            spindle diameter 340 x 320 mm
            distance between columns 380 mm
            Dimensions (HxWxD) 1,90x1,20x1,20 mm
            weight 425 kg
            Description :
            used screw spindle press

            - hand wheel foldable


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Presses screw press HASENCLEVER FPPN 180/540/300/750, 315 t


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083101 · screw press

          HASENCLEVER - FPPN 180/540/300/750, 315 t - - 1972 - konventionell

          Technical details
          nominal force 315 t︱stroke 300 mm︱no. of strokes 36 /min︱distance between columns 540 mm︱distance table/ram, max. stroke up, adjustment up 750 mm︱table surface area 530 x 630 mm︱blow die to die 630 t︱Allowed max. force 500 t︱ram surface 450 x 560 mm︱spindle diameter 180 mm︱power capacity 18,0 kW︱weight 13,0 t︱Dimensions (WxDxH) 2,5 x 2,0 x 4,0 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) can only be offered without putting into operation
            nominal force 315 t
            stroke 300 mm
            no. of strokes 36 /min
            distance between columns 540 mm
            distance table/ram, max. stroke . 750 mm
            table surface area 530 x 630 mm
            blow die to die 630 t
            Allowed max. force 500 t
            ram surface 450 x 560 mm
            spindle diameter 180 mm
            power capacity 18,0 kW
            weight 13,0 t
            Dimensions (WxDxH) 2,5 x 2,0 x 4,0 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press HILLER HP 70 WH


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06485 · screw press

          HILLER - HP 70 WH - - 1964 -

          Technical details
          pressure 7 t︱weight 0,9 t︱ 1417
            pressure 7 t
            weight 0,9 t
            1417


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press WEINGARTEN P 180


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233036 · screw press

          WEINGARTEN - P 180 - - 1963 - konventionell

          Technical details
          nominal force 240 t︱stroke 130 - 380 mm︱no. of strokes 21 - 31 /min︱distance between columns 700 / 610 mm︱distance table/ram, max. stroke up, adjustment up 650 mm︱table surface area 620 x 620 mm︱ram surface 550 x 550 mm︱spindle diameter 180 mm︱power capacity 12,0 kW︱weight 10,5 t︱Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m︱
          only permitted for warm forming work
            nominal force 240 t
            stroke 130 - 380 mm
            no. of strokes 21 - 31 /min
            distance between columns 700 / 610 mm
            distance table/ram, max. stroke . 650 mm
            table surface area 620 x 620 mm
            ram surface 550 x 550 mm
            spindle diameter 180 mm
            power capacity 12,0 kW
            weight 10,5 t
            Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m
            Description :
            only permitted for warm forming work


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses screw press WEINGARTEN PZ 220


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233035 · screw press

          WEINGARTEN - PZ 220 - - 1962 - konventionell

          Technical details
          nominal force 400 t︱stroke 140 - 400 mm︱no. of strokes 24 - 36 /min︱distance between columns 800 / 700 mm︱distance table/ram, max. stroke up, adjustment up 900 mm︱table surface area 700 x 700 mm︱blow die to die t︱Allowed max. force t︱ram surface 630 x 630 mm︱spindle diameter 220 mm︱power capacity 26,0 kW︱weight 18,5 t︱Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m︱
          only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation
            nominal force 400 t
            stroke 140 - 400 mm
            no. of strokes 24 - 36 /min
            distance between columns 800 / 700 mm
            distance table/ram, max. stroke . 900 mm
            table surface area 700 x 700 mm
            ram surface 630 x 630 mm
            spindle diameter 220 mm
            power capacity 26,0 kW
            weight 18,5 t
            Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m
            Description :
            only permitted for warm forming work
            with gear drive, single impact / double impact device, impact regulation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic HANNIFIN F20-21N


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-41230 · Single Column Press - Hydraulic

          HANNIFIN - F20-21N - - unbek. -

          Technical details
          pressure 2 t︱throat 150 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up mm︱table surface area 310 x 250 mm︱hole in the table mm︱table height over floor mm︱power requirement 2,0 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,2 x 0,8 x 1,7 m︱
          Single column press - with table base - various press accessories
            pressure 2 t
            throat 150 mm
            stroke 150 mm
            table surface area 310 x 250 mm
            power requirement 2,0 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,2 x 0,8 x 1,7 m
            Description :
            Single column press
            - with table base
            - various press accessories


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF CHS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103044 · Single Column Press - Hydraulic

          NEFF - CHS 160 (UVV) - - 2020 - Siemens S7-1500F

          Technical details
          pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995
            pressure 160 t
            throat 350 mm
            stroke 140 mm
            dayligth 370 mm
            table surface area 750 x 620 mm
            hole in the table 220 mm
            table height over floor 850 mm
            ram surface 750 x 580 mm
            oil volume 700 l
            feed down 300 mm/sec
            feed up 480 mm/sec
            feed under pressure 58 mm/sec
            total power requirement 60 kW
            weight of the machine ca. 10,8 t
            required space 2,4 x 1,8 x 3,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable two-hand operation
            2020: new electrical (safety) control - Siemens S7-1500 F,
            easy operation via touch-panel
            Design of the electrical control according to DIN EN ISO 16092-1/-2/-3
            year of manufacture 1995


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic OMERA OPI-25C


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12318 · Single Column Press - Hydraulic

          OMERA - OPI-25C - - 2001 -

          Technical details
          pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front
          Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²
            pressure 25 t
            throat 300 mm
            stroke 400 mm
            Number of working hours 1235 h
            table-size 650 x 500 mm
            ram surface 550 x 450 mm
            dayligth 700 mm
            rapid traverse - down 500 mm/sec
            work speed 27 - 72 mm/sec
            rapid traverse - up 410 mm/sec
            quantity of oil 230 l
            die cushion capacity 125 kN
            die cushion stroke 200 mm
            capacity of ejector 8 kN
            ejector stroke 150 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 1,3 x 1,6 x 2,8 m
            Description :
            Little used (only 1235 hours!) hydraulic single column press, power 25 t with
            Pilz safety control, ejector, light barrier and 2-manual operation.
            Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017.
            There is a small one in the piston rod of the cylinder Ejector cylinder
            integrated, which is controlled single-acting. The return stroke of the
            ejector takes place without force due to thesubsequent stroke of the
            Press cylinder. Machine intended for optionally retrofittable die cushion.
            Machine free due to production change. It comes from a large company and has
            been constantly maintained and kept up to date.
            Machine dealer with own stock of 1600 m²



        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic EXNER EEX 25


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233012 · Single Column Press - Hydraulic

          EXNER - EEX 25 - - 2000 - Siemens S 5

          Technical details
          pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 25 t
            stroke 150 mm
            throat 420 mm
            dayligth 450 mm
            table surface area 700 x 820 mm
            table height over floor 850 mm
            ram surface 600 x 600 mm
            feed down 370 mm/s
            feed up 370 mm/s
            working feed 18 - 33 mm/s
            oil volume 300 l
            power requirement 5,5 kW
            Weight 5,8 t
            dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZT 10


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024018 · Single Column Press - Hydraulic

          DUNKES - HZT 10 - - 2000 -

          Technical details
          Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱
            Pressing force 10 t
            oil pressure max. in the work cy. 310 bar
            engine output 3 kW
            tracking travel 70 ms 8 mm
            weight 1650 kg


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic TOX-Pressotechnik PC 30.96


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-994 · Single Column Press - Hydraulic

          TOX-Pressotechnik - PC 30.96 - - 1998 CE -

          Technical details
          pressure 30 t︱throat max. 250 mm︱stroke max. 200 mm︱dayligth 475 mm︱table surface area 550 x 500 mm︱weight of the machine ca. 2050 kg︱power stroke 20 mm︱
            pressure 30 t
            throat max. 250 mm
            stroke max. 200 mm
            dayligth 475 mm
            table surface area 550 x 500 mm
            weight of the machine ca. 2050 kg
            power stroke 20 mm


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173063 · Single Column Press - Hydraulic

          DUNKES - HZ 40 (CE) - - 1997 - konventionell

          Technical details
          pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 300 mm
            stroke 630 mm
            dayligth 900 mm
            table surface area 620 x 520 mm
            hole in the table 150 mm
            table height over floor 600 mm
            ram surface 150 mm
            total power requirement 15,0 kW
            weight of the machine ca. 4,5 t
            required space 1,0 x 1,9 x 3,0 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF EP-S 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173057 · Single Column Press - Hydraulic

          NEFF - EP-S 40 (CE) - - 1996 - Siemens S 5

          Technical details
          pressure 40 t︱throat 330 mm︱stroke 250 mm︱dayligth 450 mm︱table surface area 800 x 500 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 100 mm︱feed down 406 mm/sec︱feed up 393 mm/sec︱feed under pressure 14 mm/sec︱oil volume 350 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,6 t︱required space 1,3 x 2,3 x 3,4 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 330 mm
            stroke 250 mm
            dayligth 450 mm
            table surface area 800 x 500 mm
            hole in the table 100 mm
            table height over floor 900 mm
            ram surface 100 mm
            feed down 406 mm/sec
            feed up 393 mm/sec
            feed under pressure 14 mm/sec
            oil volume 350 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,6 t
            required space 1,3 x 2,3 x 3,4 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic HYDRAP HPSK 100 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183039 · Single Column Press - Hydraulic

          HYDRAP - HPSK 100 (CE) - - 1996 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 100 t︱throat 510 mm︱stroke 600 mm︱dayligth 1000 mm︱table surface area 1025 x 650 mm︱table height over floor 970 mm︱ram surface 1025 x 650 mm︱feed down 350 mm/sec︱feed up 330 mm/sec︱working feed 30 - 43 mm/sec︱oil volume 540 l︱total power requirement 48,0 kW︱weight of the machine ca. 12,0 t︱required space 1,2 x 2,7 x 3,9 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive Video of the finished 'sister machine' - with new electrical control - available
            pressure 100 t
            throat 510 mm
            stroke 600 mm
            dayligth 1000 mm
            table surface area 1025 x 650 mm
            table height over floor 970 mm
            ram surface 1025 x 650 mm
            feed down 350 mm/sec
            feed up 330 mm/sec
            working feed 30 - 43 mm/sec
            oil volume 540 l
            total power requirement 48,0 kW
            weight of the machine ca. 12,0 t
            required space 1,2 x 2,7 x 3,9 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive
            Video of the finished 'sister machine' - with new electrical control - available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HD 10


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-62047 · Single Column Press - Hydraulic

          DUNKES - HD 10 - - 1993 -

          Technical details
          pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱
          D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)
            pressure 10 t
            stroke 400 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6500 t
            Description :
            D U N K E S (Germany)
            CNC Controlled Hydraulic Double Column Press
            Model HD 10
            Year 1993
            ________________________________________________________

            Pressure 10 tons
            Ram stroke 400 mm
            Mounting height 600 mm

            Table size 400 x 300 mm
            Table height above floor 820 mm
            Ram area 400 x 300 mm
            Ram bore 40 mm

            Quickspeed, downwards, max. 70 mm/s
            Working speed, downwards, using max. pressure 40 mm/s
            Working speed, min. 5 mm/s
            Working speed adjustable from 5 - 70 mm/s
            Return stroke speed, min./max. 20 / 175 mm/s

            Drive 7.5 kW
            Total electrical load, approx. 12 kW - 380 V - 50 Hz
            Weight, approx. 6,500 kg

            Accessories / Special Features
            * DUNKES CNC Control, Model 200, can be programmed with
            presettable parameters, e.g. Stroke, speed, forward and
            return motion, pressing time, etc.
            * Separate switch cabinet with floppy disk input.
            * Pendant control with monitor.
            * Two-handed release, in conjunction with pneumatic safety door.
            * A turning device for calibrating and smoothing of bores is
            mounted on the ram. (Calibrating mandrel moves into the bore
            and rotates, powered by it own motor-driven timer. Repetitions
            are controlled by stroke counter.)


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 63.11.32 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143024 · Single Column Press - Hydraulic

          MUELLER - CD 63.11.32 (UVV) - - 1993 - Siemens S 7

          Technical details
          pressure 63 t︱stroke 160 mm︱throat 280 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 860 mm︱ram surface 280 x 280 mm︱oil volume l︱power requirement 22,0 kW︱Weight 3,6 t︱dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm︱hole in the table 125 mm︱
          year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            pressure 63 t
            stroke 160 mm
            throat 280 mm
            dayligth 360 mm
            table surface area 560 x 490 mm
            table height over floor 860 mm
            ram surface 280 x 280 mm
            power requirement 22,0 kW
            Weight 3,6 t
            dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm
            hole in the table 125 mm
            Description :
            year of manufacture1980
            Modernization of control 1993
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 6,3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233004 · Single Column Press - Hydraulic

          DUNKES - HZ 6,3 - - 1993 - konventionell

          Technical details
          pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t
            pressure 2 x 6,3 t
            stroke 307 mm
            throat 180 mm
            dayligth 900 mm
            table surface area 470 x 360 mm
            table height over floor 810 mm
            ram surface 45 mm
            feed down 137 mm/s
            feed up 33 mm/s
            working feed 540 mm/s
            oil volume 140 l
            power requirement 3,0 kW
            Weight 1,5 t
            dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

            Press has 2 Press shafts - press force 2 x 6,3 t


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 100.11.30 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133037 · Single Column Press - Hydraulic

          MUELLER - CD 100.11.30 (UVV) - - 1993 - konventionell

          Technical details
          pressure 100 t︱throat 320 mm︱stroke 160 mm︱dayligth 480 mm︱table surface area 630 x 550 mm︱hole in the table 200 mm︱table height over floor 860 mm︱ram surface 560 x 450 mm︱oil volume 500 l︱total power requirement 30,5 kW︱weight of the machine ca. 6,4 t︱required space 1,6 x 2,0 x 2,9 m︱
          year of manufacture 1979 overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request
            pressure 100 t
            throat 320 mm
            stroke 160 mm
            dayligth 480 mm
            table surface area 630 x 550 mm
            hole in the table 200 mm
            table height over floor 860 mm
            ram surface 560 x 450 mm
            oil volume 500 l
            total power requirement 30,5 kW
            weight of the machine ca. 6,4 t
            required space 1,6 x 2,0 x 2,9 m
            Description :
            year of manufacture 1979
            overhaul 1993
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation
            press can be inspected in running condition in our warehouse - can also be offered with new control on request


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic STENHOJ 100 TE


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-985 · Single Column Press - Hydraulic

          STENHOJ - 100 TE - - 1993 -

          Technical details
          pressure 100 t︱throat 300 mm︱stroke 400 mm︱oil volume 300 l︱diameter of piston 200 mm︱piston speed, rapid traverse 121 mm/s︱piston speed, low pressure 60 mm/s︱piston speed, high pressure 9 mm/s︱piston speed, retracting movement 117 mm/s︱piston rod diameter 140 mm︱table surface area 740 x 580 mm︱table height over floor 900 mm︱ram surface 600 x 500 mm︱quantity of oil 300 l︱total power requirement 11 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 1,0 x 1,76 x 2,52 m︱
            pressure 100 t
            throat 300 mm
            stroke 400 mm
            oil volume 300 l
            diameter of piston 200 mm
            piston speed, rapid traverse 121 mm/s
            piston speed, low pressure 60 mm/s
            piston speed, high pressure 9 mm/s
            piston speed, retracting movemen. 117 mm/s
            piston rod diameter 140 mm
            table surface area 740 x 580 mm
            table height over floor 900 mm
            ram surface 600 x 500 mm
            quantity of oil 300 l
            total power requirement 11 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 1,0 x 1,76 x 2,52 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZS 75


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-495012 · Single Column Press - Hydraulic

          DUNKES - HZS 75 - - 1992 -

          Technical details
          pressure 75 t︱throat 280 mm︱stroke 303 mm︱total power requirement 15 kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            pressure 75 t
            throat 280 mm
            stroke 303 mm
            total power requirement 15 kW
            weight of the machine ca. 7000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •